

Click small pics to enlarge
|
 |
|


WEYERHAEUSER
(Formerly MacMillan Guadiana S. A de C.V.)
Auction cancelled due to the sale of the real property,
buildings and equipment as an entire package.
Carretara Panamericana Km 960
Durango, Dgo, Mexico
|
|
DEBARKER, HEADRIG, CARRIAGE
|
- KOCKUMS CAMBIO 30" 5-arm ring debarker, spiked in & outfeed rolls, rubber tire in & outfeed rolls, 75 hp AC ring drive, electrics, controls, s/n: 69585
- FORANO 6' right hand double cut mechanical strain head rig bandmill w/slat chain landing table, 150 hp, s/n: 17579
- FORANO Type 6242RH 42"x20' 4-knee, 5-truck rack & pinion log carriage, 75 hp AC drive, pantograph rail, bumpers, control booth, setworks, s/n: MW14379
|
|
RESAWS
|
- FORANO BS60 5' left hand mechanical strain line bar band resaw w/6' knurled rollcase infeed, press feed rolls, shifting linebar, setworks, s/n: SR17679
54" left hand mechanical strain band resaw, 60 hp drive, hydraulic powered tilt feedrolls, hydraulic support unit
|
|
EDGER
|
- FORANO 6"x40" keyed arbor board edger, 75 hp, arbor drive, 15 hp feed roll drive, infeed rollcase, lasers
|
|
TRIMMERS
|
- (2) FORANO 20' valley style board trimmers, 7.5 hp end trim circular saw, feed-thru lugged chain transfers, end evening rollcases
|
|
STICKER STACKER SYSTEM
|
- 26' 4-strand infeed package deck w/4-arm tilt breakdown hoist
- 12"x25' sticker belt
- 13' 5-strand 81X chain transfer
- 20' 5-strand H130 camelback chain accumulation deck w/dealing arms
- 52"x17' hydraulic elevating rollcase w/hydraulic support unit
- 100"x24', 52"x16' outfeed package rollcases
|
|
PLANER, MOULDERS, RIP SAWS
|
- YATES AMERICAN A20-12 8"x15" 10-knife 6-head planer/matcher/profiler, w/hydraulic power feed rolls, 30"x22' spiral roll feed table w/(2) pineapple, (1) flat knurl feed rolls, hydraulic support unit, manifold, electrics, s/n: B29272
- S.A. WOODS 4"x8" 4-head moulder w/slat chain infeed, 25 hp top & bottom heads, 10 hp side heads, varispeed feed roll drive, manifold, electrics, s/n: B33600
- HILDEBRAND KM7N 7-head moulder w/bottom, right, left, right, top, bottom, left head configuration, s/n: 04785
- YATES AMERICAN C50 circular multi-rip saw, 60 hp arbor motor, 24"x15' spiral roll infeed rollcase w/adjustable fence, s/n: B29273
- DIEHL MR 90 circular multi-rip saw, 40 hp arbor motor, s/n: 7/84M4726
|
|
AIR COMPRESSORS
|
- GARDNER DENVER Electra Saver II 50 hp rotary screw air compressor
- GARDNER DENVER 40 hp, 25 hp, 20 hp tank mounted rotary screw air compressors
- 4' dia x 10' vertical air receiver tank
|
|
ELECTRICAL
|
- GE 2000 amp main circuit breaker, Cat # TPSS6620G
- GE 1600 amp main circuit breaker, Cat # TPSS6616G
- ALLEN BRADLEY 7-section 26-station MCC, 7-section 21-station MCC, 2-section 6-station MCC, 2-section 5-station MCC, motor control cabinets
- ALLEN BRADLEY Size 5 reduced voltage starter
- POWER TECH cable & trays
|
|
FILING & GRINDING ROOM
|
- WEINIG R931 head knife grinder, s/n: 9681777
- HANCHETT 413LH, 414RH band saw sharpeners w/clamps & stands
- (2) HANCHETT Size 82 band saw stretcher rolls w/leveling blocks
- HANCHETT Size LG54 travelling bed straight knife grinder
- S.A. WOODS 328M head grinder, s/n: B33651
- (2) circular saw hand gummers
- Shop built pattern knife grinder
|
|
CHIPPERS, BINS, SCREENS, KILNS, BOILERS
|
- FORANO 58" 6-knife horizontal & drop feed, top discharge chipper(chip pack system w/cyclone & FORANO CS 28 8'x8' chip shaker screen)
- (2) 40-unit, 16-unit hydraulic chip bins
- (2) 100 hp, 50 hp low pressure blowers
- TEEPEE burner w/fans
- (2) IRVINGTON MOORE 27'x53' double track, steam heated, aluminum shell, bolt together dry kilns, 50 hp line shaft fans, graphs, electrics, air compressor
- (75+) kiln carts
- RAY 300 hp diesel fired package boiler, 150 lb max working pressure, 1500 sq ft heating surface
- SUPERIOR BOILER WORKS 300 hp diesel fired package boiler, 150 lb max working pressure, 1500 sq ft heating surface
|
CONVEYING SYSTEMS
(all drives SEW EURODRIVE gearhead motors or GE w/RADICON reducers)
|
- Log decks: 20' 5-strand 6" pitch chain w/log stop & loader
- 20' 3-strand 6" pitch chain w/log stop & loader
- 20' 2-strand 6" pitch chain w/log stop & loader
- 21' 5-strand 6" pitch chain w/log stop & loader
- Log hauls: 65' 6" pitch chain w/log cradles, S-drive
- 84' 6" pitch chain w/log cradles, log sweeps
- 80' 6" pitch chain w/log cradles, log sweeps
- Chain transfers: 30' 4-strand 81XH chain w/5-arm breakdown hoist
- (2) 13' 4-strand 81X chain
- 11' 4-strand 81X chain
- 10' 4-strand 81X chain
- 16' 4-strand 81X chain
- 11' 3-strand 81X chain
- 150' 3-strand 81X chain
- 30' 4-strand 81XH chain
- 16' 5-strand 81X chain
- 7' 4-strand 81X chain
- 21' 4-strand 81XH chain
- 23' 5-strand H130 chain
- 10' 4-strand H130 chain
- 23' 4-strand H130 chain
- 15' 4-strand H130 chain
- 150' 3-strand 81X chain
- Landing tables: 4-1/2' 4-strand H130 rooftop
- 5' 4-strand H130 rooftop
- 32' 4-strand H130 rooftop
- Belt conveyors: 18"x35'
- 18"x27'
- (2) 12"x50'
- 18"x130'
- 18"x38'
- (2) 12"x30'
- 36"x105' covered troughing rolls
- 18"x65'
- 18"x38'
- 18"x45'
- 18"x42'
- 12"x42'
- 18"x150'
- 31"x35'
- 12"x40'
- Rollcases: 48' w/(16) 8-1/2"dia x32" rolls
- 13' w/(5) 8-1/2" dia x 24" rolls
- 23' w/(10) 8/1/2" dia x 32" rolls
- 30' w/(11) 8-1/2" dia x 32" rolls
- 17' w/(5) 8-1/2" dia x 32" rolls
- 74' w/(12) 8-1/2" x 32" rolls
- 17' x 36" rolls
- 19' x 30" rolls
- Chain waste conveyors: 160' 6" pitch w/14" flites
- 140' H82 chain w/flites
- 32' H78 chain w/flites
- 90' H82 chain w/flites
- 10' H78 chain w/flites
- 98' H82 chain w/flites
- 17' H78 chain w/flites
|
|
MISCELLANEOUS MILL EQUIPMENT
|
- (2) hydraulic log turners, (40+) lumber stacking carts, electrical and maintenance rooms, conveyor belting, spare motors, structural steel, wood sticker & bunks, air lines throughout plant, conduit & wire throughout plant, planer & moulder heads, band saw & circular saw blades, long neck cyclones, wood fired boiler system, water treatment system, diesel storage tanks to 20,000 litres, much more
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- Equipment to be sold using U.S. dollar valuations
- PAYMENT: Full payment must be made by no later than 4pm, Thursday, January 22.
- A 25% deposit is required by the close of business, auction day.
- Wire transfers, U.S. dollar drafts, cashiers check in U.S. funds only. Personal or company checks drawn on U.S. banks only, and accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #48
|
|
LODGING
|
| VICTORIA EXPRESS | | 011 52 618 829 1500 |
| EL GOBERNADOR | | 011 52 618 813 1919 |
| HOLIDAY INN EXPRESS | | 011 52 618 829 2000 |
|
|
AIRPORTS & CAR RENTAL
|
- Durango Airport(Aeropuerto Internacional Guadalupe Victoria) is served by Aeromexico, Aerocalifornia, and Aeromar airlines; Signature and Auto Rent Durango car rental agencies.
|
|
DRIVER DIRECTIONS
|
- From the airport take Durango Torreon Hwy aproximately 2.5 miles toward Durango.
- Turn right on San Ignacio Loop and drive approximately 5 miles to Blvd Colosio(Carretera Durango Parral)
- Turn right on Blvd Colosio and drive approximately 2.5 miles to Masisa property entrance on the right.
- Auction site is located through Masisa property gate. (Cemetary is across the street from Masisa entrance.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|