|
10AM - THURSDAY - AUGUST 17
Preview 10am to 4pm, Wednesday, August 16
1102 St Paul Ave, Tacoma, WA
Past Auction held in 2006
Display Catalog
Downloadable PDF Catalog
Advance Bid Center
|
|
MILL EQUIPMENT
|
- 1997 WADKIN XE220/6 moulder, 5"x9" capacity (7) heads, 40mm spindles, 600 rpm, w/added universal section, upgrade hp on motors, hydraulic dual head feeder, infeed rollcase, scissorlift gravity rolls, power infeed transfer, outfeed belt transfer, 15' 6-strand grade chain, outfeed block conveyor, s/n: 96558
- WADKIN FDN-5055 moulder, 5"x9" capacity, (6) heads, w/power feed, rollcases, hydraulic scissorlift, transfer, s/n: 5055
- STETSON ROSS 6-10A-1planer/matcher, 8"x15" capacity, (6) heads, (10) knives, 100 hp top, 50 hp bottom, 30 hp side & profile heads, 16' single pineapple feed table, infeed transfers, outfeed belt, controls, electrics, s/n: 3886
- 1995 BARR MULLEN Wondersaw optimized chop saw line, w/36' outfeed grading station, outfeed block belts, updated software (2004), s/n: 1194T128
- TURNER 42" twin band resaw, 60 hp, w/in & outfeed belts
- TURNER E53 52" vertical band resaw, 60 hp, w/powered pinch rolls, 40 hp, in & outfeed belts
- FORESTOR 900 36" vertical band resaw, 20 hp, power feed roll, 1 hp, w/MURPHY ROGERS 3 hp dust collector, s/n: 2/941
- EKSTROM CARLSON straight line rip saw, 24" throat, 15 hp
- 2-saw hula saw station, 8' w/gravity rolls & slots, 40' 3-section 6-strand outfeed transfer, stacking frame
- TORWEGGE rip saw
- SECO SK18PCS pneumatic chop saw w/infeed rolls, outfeed stops
- Pneumatic chop saw in in & outfeed conveyors
- SIMPLEC 212L chop saw, s/n: 707M34L
- Swing arm chop saw
- JET JTS 10" table saw
- OLIVER Straightoplane 36" planer, w/in & outfeed belts
- GRIZZLY 24" sander
- STETSON ROSS XL 2x4 moulder w/grinder
- INGERSOLL-RAND T-30 15 hp air compressor
- SULLAIR 25 hp rotary screw air compressor
- GREAT LAKES GPS-100 air dryer, 100 SCFM, 100 PSI
- DIEHL computerized measuring stand, s/n: 96M-6148-5564
- WEINIG 931 travel bed knife grinder, s/n: 933-2027
- COVEL-HANCHETT GK36 travel bed knife grinder, s/n: 825
- MICHIGAN MKCG travel bed knife grinder, s/n: 430
- TRI-STATE 411 motorized set up stand
- MILLER Gold Star 300SS welder
- CARTER DAY 232 RF-8 baghouse, NYB 40 hp blower, metering feeder, blowpipe, w/2002 FLAMEX 2-zone spark detection system, s/n: RFC-1382
- Blower, 24", 60 hp, w/SAFTRONICS EZ6 solid state starter
- (2) JET 1200 cfm dust collectors, 2 hp
- KUFO UFO102B 2-bag dust collector
- (2) PEERLESS 60-unit hydraulic chip bins w/cyclone, 15 hp
- DIXON BOILER WORKS 150-225 hp boiler, natural gas/diesel, electrics, w/former hog fuel infeed system, blowpipe to cyclone, hog fuel bin, 3-strand transfer, bypass conveyor, screw auger, drives
- (6) block transfer conveyors, w/drives
- 18' 5-strand transfer w/drive
- 20' 6-strand transfer w/drive
- 4-arm lumber tilt hoist
- P&H 5 ton x 40' span overhead bridge crane
- (2) block construction dry kilns, COE controls, 40 hp line shaft drives, aluminum doors, kiln carts, rail
- Large assortment of equipment & tools including MILWAUKEE, (2) DEWALT 12" compound mitre saws, SKIL 14" chop saw, FOREMOST 12 spd drill press, BLACK & DECKER angle grinder, PORTER CABLE porta-band saw, roll-away tool box, 5 hp portable air compressor, hand tools, (4) self dumping hoppers, lumber carts, shop carts, banding equipment, pallet jack, conveyors, assorted electrics, planer & moulder heads, profile knives, saws, double end grinders, set up stands, oxy acetylene set, remaining lumber inventory, desks, chairs, files, office furniture, computers, printers, copiers, office equipment, more
|
|
ROLLING STOCK
|
- JOHN DEERE 544 rubber tire loader, JOHN DEERE 6 cyl diesel, s/n: 085104W
- TOYOTA 5FD70 14,000 lb HRT forklift, diesel, 200" 2-stage mast, enclosed cab, s/n: 12818
- HYSTER H60XL 6000 lb HRT forklift, propane, 177" 3-stage mast, sideshift, s/n: A177812744F
- HYSTER 8000 lb HRT forklift, propane, 2-stage mast
- KOMATSU 30 forklift, propane, sideshift
- ROSS/CLARK 6657 lumber carrier, 2000 lb capacity, propane, s/n: 717318
- 8'x40' office trailer
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT
: Full payment must be made by no later than 4pm, Friday, August 18.
- A 25% deposit is required by the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
- From North or southbound I-5, take the Portland Avenue exit (#135).
- Drive north on Portland Avenue approximately 8/10 mile to St Paul Avenue.
- Turn left and drive north on St Paul Avenue approximately 6/10 mile to the auction site, located on the left.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2006 James G. Murphy Co.
All rights reserved worldwide
|
|
|
