Click small pics to enlarge

Click HERE for more photos


WELCO/SKOOKUM LUMBER CO

10AM - WEDNESDAY - JANUARY 16
Preview 10 to 4, Tuesday, January 15
780 W Hwy 108, Shelton, WA

Past Auction held in 2007

Display Catalog

Downloadable PDF Catalog

Advance Bid Center

PLANERMILL
  • 1996 YATES AMERICAN A-95 planer, 6"x13" capacity, 20-knife, (6) heads, 125 hp top, 75 hp bottom & sides, 50 hp top & bottom profiles, (10) hydraulic feed rolls, guide & pressure bars w/hydraulic unit, chip breakers, top, bottom & side head brakes, YATES AMERICAN F-31 22' hydraulic dual pineapple feed table, (6) 14"x28-1/2" smooth rolls, speed up rolls, 8' 8-strand poly infeed chain transfer, SIEMENS 3 hp gearhead motor, 12' hydraulic driven planer bridge, (6) 14"x15-1/2" smooth canted rolls, 18"x16' planer outfeed belt, SIEMENS 10 hp gearhead motor, 375 hp hydraulic unit, ALLEN BRADLEY PLC 5/20 w/remote adaptor control panels, (70+) spare top, bottom, side & splitter heads, profile stands, jointer bars, straight edge, spare bed plates, rolls, knives, gibbs, s/n: B29779
  • 2004 PRO EDGE TEC 16FAB04 automatic cutter head grinder, cutter heads up to 16" cc, auto down feed, traversing, auto indexing
  • YATES 95 side head grinder with 16-bit indexing plate, 2 1/8" arbor, s/n: B29785
  • (2) 1996 MCDONOUGH SD54A horizontal back to back twin band resaws, US 100 hp/1775 rpm, air strain, 4" thick x 18" wide x 5'-20' long capacities, hydraulic 18" feed through slat bed chain & feed rolls, 21' pop up infeed rollcase, (2) 4000 lb advanced materials scissor lifts w/pumps, 19' hydraulic outfeed rollcase, 24"x78' clean out belt conveyor, SIEMENS 15 hp gearhead motor, ALLEN BRADLEY PLC 5, remote adaptor, PANEL VIEW 900 touch screen, ALLEN BRADLEY ROCKWELL 8-section MCC w/(2) ALLEN BRADLEY SMC 125 hp smart motor controllers, s/n's: H54-1489-SDL, H54-1490-SDL
  • TURNER 52" vertical single band resaw, 75 hp arbor drive, mechanical strain, MCDONOUGH 4-roll hydraulic feed works, 24"x17' infeed, 24"x15' outfeed belts, ALLEN BRADLEY flex 40 drive, 15 hp hydraulic unit, s/n: C451
  • TURNER 52" vertical single band resaw (dismantled)
  • (2) 1998, (2) 1993 AMERICAN WOOD DRYERS all aluminum clad steam fired package loaded dry kilns, 24' high x 46' wide x 30' deep, 62,000 bf capacity each, 20' high motorized doors, hydraulic door carriers, (4) 42", 7.5 hp fans, (18) vents, (2) exhaust fans, HONEYWELL TRUE LINE kiln controls, condensate return pumps, 3" steam pipes, BARBER COLEMAN heat valves & actuators, FISHER valves
  • 1990 KEWANEE Type C 7L90 series 4X wood fired steam package boiler, 397 hp, 15 lbs steam, 13,697 lbs steam per hour, 13,290 mbh, 14,991 sq ft steam total combustion volume 750 cu ft, MW 24 fuel injector blower, TWIN CITY size 182 over fire blower, boiler, water feed system with pumps, energy resource systems controls, WESTINGHOUSE flue gas analyzer, ALLEN BRADLEY 1336 AC adjustable frequency drive, DAYTON 10 hp compressor, 20'x30'x 4-section hydraulic fuel infeed walking floor, 25 hp hydraulic unit, 6' diameter cyclone, piping, 12"x25' fuel discharge auger, 12"x28' fuel transfer auger, 12"x12' fuel infeed auger, (2) ash discharge augers, 28'-32' high x 22' wide x 42' long 3-sided all steel boiler building w/cover over walking floor & tanks
  • 1993 BACT ENGINEERING V-ME 109 multi element scrubber w/variable inlet throat, BACT ENGINEERING 025 primary classifier, 2500 gallon dry flight type, IAP 13,500 cfm induced draft fan, TOSHIBA 100 hp/1800 rpm, BARRON INDUSTRIES multi tube collector, 8x8 hd sq rotary air lock feeder, piping, s/n: L104
  • BLUE BABE 48"x48" fully guided vertical package cut off saw, variable cut travel & bar cutting force, backing bar, 22' hydraulic driven in & outfeed rollcases, 4-1/2"x52" rolls
  • PRECISION 18A right hand pneumatic chop saw w/20' infeed gravity rolls, outfeed lumber stops w/gravity rolls, s/n: 18363
  • 4'-20' valley style trimmer w/(2) 18" saws, 10 hp/3500 rpm, 40' 2-section, 13-strand lugged feed through transfer, hydraulic drives, 92"x20' even end rollcase, SKK 2 hp/100 rpm, (2) 16"x7-1/2' trim end belts, SIEMENS 10 hp, 35', 14' 5-strand poly chain infeed transfers, SIEMENS 3 hp , 26' 6-strand, 8-1/2' 7-strand poly chain outfeed transfers, SIEMENS 3 hp, controls, electrics
  • QUINALT PACIFIC MKZ single saw dog ear machine, ACC 2 hp/3400 rpm, air cylinder actuated, s/n: 072903
  • 2005 STRAPACK RQ-8Y semi automatic poly strapping machine, 15"x25" opening, 110 volt, single phase, s/n: 29432115 (new, never installed)
  • STRAPACK RQ-8Y semi automatic poly strapping machine, 15"x25" opening, 110 volt, single phase, powered infeed roll, (2) 21' powered outfeed rollcases, 4-1/2' 8-arm belt crossover transfer, SIEMENS gearhead motor, s/n: B0027
  • STRAPACK RQ-8Y semi automatic poly strapping machine, 15"x25" opening, 110 volt, single phase, s/n: B0028 (not installed)
  • MONTGOMERY 4540S315F18HDRCL 18"x36" blo-hog, BALDOR 75 hp/1765 rpm, 14"x42' infeed chevron belt, SKK 2 hp/56 rpm gearhead motor
  • PEERLESS 20-unit hydraulic chip bin, 10 hp
  • 8', 6', 4' cyclones w/piping
  • TWIN CITY size 937 type RBR-SW blower, TOSHIBA 200 hp/1770 rpm
  • WSM 24-6-20 blower, 25 hp
  • (2) VIBRA PRO vibratory conveyors, 16"x60" & 16"x38', TOSHIBA 5 hp
  • CONVEY KEYSTONE 14' 5-arm hydraulic breakdown hoist w/54"x84" travel arms, 12,800 lb capacity, 40ß tilt, 120 hp hydraulic unit
  • AMERICAN 4'x20' package scissorlift w/4' 7-strand H78 poly chain transfer, 20 hp hydraulic unit
  • (4) AMERICAN 4000 lb scissorlifts w/pumps
  • (6) AMERICAN 2000 lb scissorlifts w/pumps
  • GLOBE 1000 lb scissorlift w/pump
  • QUINCY 350 tank mounted compressor, 15 hp
  • QUINCY 325 tank mounted compressor, 5 hp
  • 30"x72" air receiver
  • ALLEN BRADLEY Centerline 8-section MCC w/(2) ALLEN BRADLEY 125 hp SMC controllers
  • CUTLER HAMMER EATON 4-section MCC w/(23) switches
  • ALLEN BRADLEY bulletin 1336 B010-EJD-FJ3-L3-S1 AC adjustable frequency drive
  • (4) ALLEN BRADLEY bulletin 1336 B005-EDD-FA2-L2 AC adjustable frequency drives
  • ALLEN BRADLEY flex 40 AC adjustable frequency drive
  • ALLEN BRADLEY 1336 AC adjustable frequency drive
  • ALLEN BRADLEY 1305 AC adjustable frequency drive
  • ALLEN BRADLEY SLC 5/04 CPU w/(2) scanners, (1) output/input, (6) input, (6) output modules
  • (2) ALLEN BRADLEY PLC 5/20
  • (3) ALLEN BRADLEY 1791-10BW 64 point, 24 vdc distributed I/O modules
  • CUTLER HAMMER 50 kva transformer, 120/240 volt, single phase
  • (2) SQUARE D 20 kva transformers, 460 to 460Y/266 volt, 3-phase
  • CUTLER HAMMER 225 amp breaker panel, 120/240 volt, single phase
  • SQUARE D 125 amp breaker panel, 480Y/277 volt, 3-phase
  • SQUARE D 600 amp/600 volt disconnect
  • (3) SQUARE D 200 amp/600 volt disconnect
  • CUTLER HAMMER 200 amp/600 volt disconnect
  • (10) CUTLER HAMMER 30 amp/600 volt disconnects
  • 62' 6-strand rooftop poly chain transfer w/SKK gearhead motor
  • 35' 6-strand camel back poly chain transfer w/SKK gearhead motor
  • 26' 7-strand camel back poly chain transfer w/SKK gearhead motor
  • 23' 6-strand H78 infeed lumber transfer w/hydraulic motor
  • 22' 6-strand camel back poly chain transfer w/SIEMENS gearhead motor
  • 22' 5-strand H78 chain lumber transfer w/SKK gearhead motor
  • 18' 7-strand H78 chain lumber transfer w/SIEMENS gearhead motor
  • 16-1/2' 5-strand H78 poly chain lumber transfer w/SKK gearhead motor
  • 16' 6-strand H78 poly chain lumber transfer w/SIEMENS gearhead motor
  • 16' 5-strand H78 chain w/lugs transfer, SIEMENS gearhead motor
  • (2) 16' 2-strand H78 sticker recovery transfers w/SIEMENS gearhead motors
  • 15' 7-strand camel back poly chain transfer w/SKK gearhead motor
  • (2) 15' 2-strand H78 sticker recovery transfers (no drives)
  • 14' 8-strand H78 lumber transfer w/sensors, pin stops, (3) 14" powered rolls, SKK gearhead motors
  • 6' 8-strand H78 poly chain transfer w/SIEMENS gearhead motor
  • 4' 5-strand H78 poly chain transfer w/SKK gearhead motor
  • 24"x36' clean out belt transfer w/SIEMENS gearhead motor
  • 8"x35' clean out belt transfer w/SKK gearhead motor
  • 30"x32' clean out belt transfer w/SKK gearhead motor
  • 12"x26' clean out belt transfer w/SKK gearhead motor
  • 54"x23-1/2' clean out belt transfer w/SKK gearhead motor
  • 14"x21' clean out belt transfer w/SIEMENS gearhead motor
  • 12"x21' clean out belt transfer w/SIEMENS gearhead motor
  • 25' powered rollcase with (21) 3"x43-1/2" rolls, SKK gearhead motor, 11' 6-strand H78 poly chain transfer (no drive)
  • 52" lumber swede, SKK 2 hp/155 rpm
  • Assortment of mill equipment including: (40) 4-1/2'x22-1/2' lumber rollouts w/rollout lumber stops; lumber pull carts; (155,000) kiln stickers, 3/4"x1-1/2"x48", (177) units; WAGNER L712 wood friendly stack probe moisture meter; WAGNER L612 wood friendly digital moisture meter; WAGNER L600 moisture meter; LIGNO SCANNERS digital moisture meter; OMEGA HH21 moisture meter; DICKSON TH550 moisture meter; LIGNOMAT & DELMHORST probe type moisture meter; GRIEVE L0-201C lab oven, 800ß, 120 volts, single phase; (2) OHAUS balance beam type scales; cameras & monitors; halide & fluorescent lights; much more

BUILDING
  • CBC engineered clear span all steel building w/ 8-1/2' eaves, 16' peak x 70' wide x 150' long, insulated, sprinklers, halide lights

ROLLING STOCK
  • CAT 950 log loader, CAT diesel, top log clamp w/(4) bottom forks, 3rd valve, 20.5-25 tires, s/n: P7060427
  • PRENTICE D600B-C tri axle swivel grapple log loader, ALLIS CHALMERS 3500, DETROIT L53N diesels, ALLISON trans, PRENTICE swivel grapple boom, enclosed cab, outrigers, 15-25-5 tires, s/n: 600P13336-7
  • CAT V50B 5000 lb HRT forklift, 4 cyl gas, 2-stage mast, sideshift
  • MOBIL 2TE3 sweeper, FORD 300 6 cyl gas, FORD sweeper motor, s/n: 321175

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Wednesday, December 5 at Marysville, & Friday, December 7 at Shelton.
  • A 25% deposit is required by the close of business, auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #1960

Hotels
  • Super 8, Shelton WA - (360) 426-1654
  • Little Creek Casino, Shelton WA - (360) 427-7711

DRIVER DIRECTIONS
  • From north or southbound I-5 take the Hwy 101 exit (#104).
  • Drive north on Hwy 101 approximately 13.8 miles to the Hwy 108/SE Old Olympic Hwy exit.
  • Drive southwest on Hwy 108 approximately 9/10 mile to the auction site.
  • Follow signs through log yard and past operating mill. Watch for trucks.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2007 James G. Murphy Co.
All rights reserved worldwide