|
10AM - TUESDAY - JANUARY 15
Preview 10 to 4, Monday, January 14
1218 First St, Marysville, WA
Past Auction held in 2007
Display Catalog | X Lots
Downloadable PDF Catalog
Advance Bid Center
|
|
FENCING MILL
|
- 2007 SOFTAC 5' horizontal lineal positioned back to back horizontal twin resaw, 36" throat, 24" height, designed for cedar, TOSHIBA 125 hp/1785 rpm, monitored hydraulic strain, 27" hydraulic feed through slat bed chain, 27" twin hydraulic driven in & outfeed roll, (2) 2007 ALLEN BRADLEY CENTERLINE 5-section MCC's w/(22), (17) switches, (3) ALLEN BRADLEY SMC flex drives 150-F201NBD 150 hp, 2007 ALLEN BRADLEY LOGIX 5561 PLC, 2007 NORCAN 40 hp twin pump hydraulic unit, 8' powered infeed rollcase w/(4) 8-1/2"x27" rolls, 3' 3-strand transfer, (2) motors to REX reducer drives, 8' powered outfeed rollcase (5) 8-1/2"x27" rolls, 7' 4-strand camel back poly chain transfer, (2) motors to REX reducer drives, infeed belt transfer & chain transfers, merry go round rollcase, transfers, belts, controls, ALLEN BRADLEY VIEWPLUS 700 touch screen 6'x6' control booth, s/n: 4243
- 8' L&M style bar type cut off saw, 25 hp/1770 rpm, log clamp, cylinder, 10 hp hydraulic unit, controls, 33' single strand infeed log haul w/motor to FALK reducer, 56' single strand outfeed log haul, log sweep, motor to REX reducer
- SALEM 5' left hand double cut vertical headrig bandmill, 150 hp/1188 rpm, mechanical strain, 30"x60" feed through belt, hydraulic drive, 8' infeed rolls, gearhead motor, 9' outfeed rolls, SKK gearhead motor, 22' powered outfeed rollcase, (12) 11"x36" rolls, dual 4' 4-strand outfeed transfers, (3) motors to REX reducers
- Hydraulic log kicker, 30 hp hydraulic unit
- 1990 SCHURMAN 6SBA42 6"x42" splined bottom arbor gang edger, (2) TOSHIBA 250 hp/1770 rpm, SKK 30 hp/100 rpm gearhead feed drive, knurled feed rolls, press rolls, 10' powered infeed rollcase w/(4) 11"x56" knurled rolls, 8' 3-strand crossover transfer w/hydraulic & gearhead motors, 11' chromed line bar, pin stops, 13' powered outfeed rollcase, (2) 6-1/2"x60" rolls, SKK 5 hp/45 rpm, (2) ALLEN BRADLEY SMC 150 A360NBD smart motor controllers, SAFTRONICS 1336S B030-AN-EN-3 AC drive, (3) ALLEN BRADLEY SLC 100 PLC's, 6'x6' control booth
- Custom built 2"x15" reman edger, TECO 40 hp/1735 rpm, SKK gearhead feed drive, knurled feed drive rolls, press rolls, ALLEN BRADLEY SMC 150-54ANBD smart motor controller, ALLEN BRADLEY 160S5C variable speed controller
- Custom built 8' left hand trimmer w/(9) 24" air operated line shaft driven saws, 1' spacing, 30 hp, 18' 7-strand lugged feed through transfer, 72" even end rollcase, EURO gearhead motor, COE/NEWNES/MCGEEHEE multi-stage positioning fence, 8' 4-strand lumber unscrambler, 13' 5-6 strand lumber decline, EURO gearhead motor, 24"x31' clean out conveyor, EURO gearhead motor, ALLEN BRADLEY 5/04 CPU, (2) ULTRA 300 CPU's
- Right hand & left hand pneumatic chop saws with gravity rolls & lumber stops
- PRECISION HUSKY 58-10 58" 6-knife chipper, TATUNG 250 hp/1180 rpm, horizontal infeed, top outfeed, ALLEN BRADLEY SMC plus 150-A360NBD smart motor controller
- KOCKUMS KS88 8'x8' 3-deck chip screen, TOSHIBA 5 hp/1145 rpm, s/n: 008-242-1
- PEERLESS approximately 24-unit hydraulic chip bin, 15 hp
- (2) PEERLESS approximately 20-unit hydraulic chip bins
- 2006 SULLAIR V2005-125L/A rotary screw compressor, TOSHIBA 125 hp, oil flooded, air cooled, supervisor controller, 633 scfm @ 100 psig (approx 3800 hrs), s/n: 200609120109
- 2006 SULLAIR SRV700 variable operation refrigerant dryer, 700 scfm @ 100 psig, s/n: 303469001
- 2006 MANCHESTER 302445 5'x15' vertical air receiver, 1550 gallons, 137 psig
- 3-1/2'x13' vertical air receiver
- 2007 MILL POWER BC/24/36X12X 44-1/2' balanced vibratory conveyor w/10' impact liner, Type 1 dynamic counterbalance, 10 hp/180 rpm, s/n: 071326
- 1997 MILL POWER 24"x80" balanced vibratory conveyor w/5' fiberglass tub, 12' fines drop out, 1" stroke, 452 rpm, TOSHIBA 15 hp, w/MDI CR85 metal detector, s/n's: QS1297, 961120
- MILL POWER 24"x66' balanced vibratory conveyor, 1" stroke, 430 rpm, TOSHIBA 5 hp
- MILL POWER 36"x24' balanced vibratory conveyor, 12' fines drop out, TOSHIBA 5 hp
- 2007 SIEMENS 3000 amp 2-section main switchboard w/integrated cubicle bus, (1) 800, (2) 600, (3) 400, (3) 200 amp breakers
- 2007 SIEMENS 3000 amp 2-section main switchboard w/integrated cubicle bus, breakers
- 2007 ALLEN BRADLEY CENTERLINE, bulletin 2100 5-section MCC w/ (22) switches, (3) SMC 150-F201NBD flex drives
- 2007 ALLEN BRADLEY CENTERLINE, bulletin 2100 5-section MCC w/(17) switches
- ALLEN BRADLEY 5-section MCC w/(18) switches, size 4 starter
- ALLEN BRADLEY 3-section MCC w/(11) switches
- 2007 ALLEN BRADLEY LOGIX 5561 smart PLC
- (6) 2007 ALLEN BRADLEY 160SSC AC160BA10NSF1P1 variable speed controllers
- 2007 ALLEN BRADLEY 150SSC variable speed controller
- 2007 ALLEN BRADLEY 154A11NB smart motor controller
- (4) ALLEN BRADLEY SMC 150-A360NBC smart motor controllers
- ALLEN BRADLEY SMC 150-54ANB0 smart motor controller
- SAFTRONICS 1336S B030-AN-ED-3 AC frequency drive
- ALLEN BRADLEY 5/04 CPU w/(2) ULTRA 300 CPU's
- (3) ALLEN BRADLEY SLC 100 PLC's
- 2007 FEDERAL PACIFIC 50 kva transformer, 240x480, 120/240 volts
- GE 50 kva transformer, 120/240 volts, single phase
- (30+) ALLEN BRADLEY size 1 starters
- 48' 5-strand H124 log deck, S-drive, motor to REX reducer
- 51' 4-strand H124 log deck, 15' 5-arm LS&L motor to reducer
- 29' 3-strand H84 log deck, 4' 2-arm LS&L motor to REX reducer
- 96' single strand H132 log haul, S-drive with motor to FALK reducer
- 66' 2-strand H124 log haul w/(2) 4-arm kickers, motor to FALK reducer
- 56' single strand H124 log haul w/log sweep, motor to REX reducer
- 54' single strand long link log haul, S-drive, motor to FALK reducer
- 33' single strand H124 log haul, motor to FALK reducer
- 23' single strand long link log haul, S-drive, motor to FALK reducer
- 24"x112' troughing belt w/SKK gearhead motor
- 24"x58" troughing belt w/SKK gearhead motor
- (10+) transfers to 67'
- (10+) chain conveyors to 80'
- Plus: belt transfers to 68'; (50+) motors to 250 hp, SKK & EURODRIVE gearheads to 30 hp, REX PLANETGEAR & FALK reducers; (30+) lumber carts; (2) MILLER DC welders; lights; heaters; AC units; hose reels; catwalks & stairs; steel substructure; breakers to 1200 amp; wire & conduit; lights, cameras & monitors
|
|
POND BOATS
|
- (2) 15' pond boats, DETROIT diesel
|
|
ROLLING STOCK
|
- 1984 LETOURNEAU 2594SS solid state 4WD log stacker, 350 CUMMINS turbo diesel, D7 generator, GAC starter, TOYO 33.25-35 tires, 23,714 hrs as of 8/7/07, major rebuild in 2007 on car & rail, wheel motors, steering motors & hoist cable, s/n: 1033
- HYSTER GPL40 9000 lb dual pneumatic forklift, propane, 187" 3-stage mast, 48" forks
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT: Full payment must be made by no later than 4pm, Wednesday, December 5 at Marysville, & Friday, December 7 at Shelton.
- A 25% deposit is required by the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #1960
|
|
Hotels
|
- Best Western Tulalip Inn, Marysville WA - (360) 659-4488
- Comfort Inn, Marysville WA - (360) 658-1339
- Village Inn & Suites, Marysville WA - (360) 659-0005
- Tulalip Resort Casino, Tulalip WA - (360) 651-1111
|
|
DRIVER DIRECTIONS
|
- From north or southbound I-5, take the Marysville/4th St exit (#199).
- Drive east on 4th 1 block to Beach Avenue.
- Turn right and drive south on Beach 3 blocks to First St.
- Turn left on First St. The auction site is ahead, on the right.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2007 James G. Murphy Co.
All rights reserved worldwide
|
|
|
