Click small pics to enlarge

Click HERE for more photos



WASHINGTON PACIFIC INDUSTRIES

9AM - THURSDAY - MAY 17
Preview 10am to 4pm, Wednesday, May 16
14421 Shamel St, Entiat, WA

Display Catalog | X Lots

Downloadable PDF Catalog | X Lots

Advance Bid Center

Past Auction held in 2007

Debarker & Infeed Decks
  • MORBARK C12 4"-24" diameter capacity rosserhead debarker, 8" bottom knife head, (4) knives, canted spiked top & back head, NEWMAN 75 hp/1770 rpm, (2) 20 hp hydraulic units, 21' infeed hourglass rollcase, (8) 55" rolls, stop gate, 3-arm kicker, 12' outfeed hourglass rollcase, (7) 55" rolls, 4-arm kickers, 20' 3-strand C188 infeed transfer, 3-arm LS&L, 20' 2-strand C188 re-entry transfer, auger clean out conveyor, hydraulic drives, cab, controls, s/n: 84679

Cut Off Saw & Sort Line
  • 42" insert tooth cut off saw w/top and bottom clamps, TOSHIBA 40 hp/1450 rpm, 10 hp hydraulic unit, 50' infeed chain log haul w/flites, log stops, gearhead motor, approximately 90' outfeed hourglass rollcase, (30) 24" rolls, log stops, sort line kickers, gearhead motor, 20' 3-strand H78 infeed log transfer, 7-1/2 hp gearhead motor, 24"x50' clean out belt, motor to reducer, controls, electrics

Scragg Saw
  • 48" 4-saw 20' circular saw end dogging scragg, (2) GE 150 hp/1180 rpm, (5) pop up log positioning chains, laser, (4) 4' 6-strand feed through transfers, spiked hold down rolls, PFS 50 hp hydraulic unit, outfeed rolls, controls

Resaw
  • Custom built 54" vertical band resaw, 50 hp/1800 rpm, dual powered feed rolls

Edger
  • SCHURMAN 6TBL42, 8"x42" keyed bottom arbor edger, US 150 hp/1775 rpm, knurled feed rolls, press rolls, lasers, 17' powered infeed rollcase, 14' linebar, (5) 8-1/2"x42" rolls, 6' 3-strand jump transfer, drives, controls

Chip Pac
  • MORBARK 6-58 CHIP PAC w/MORBARK 3-knife chipper, approximately 150 hp, 6'x6' 2-deck chip screen, chip thrower, s/n: W236

Vibratory Conveyor - Metal Detector
  • MILL POWER 60' 3-triple trough vibratory conveyor w/22", (2) 9" vibratory pans, 5' fiberglass trough, motor, s/n: 82062
  • MDI CR85 metal detector, s/n: 52187

Blower - Feeder
  • RADER 716V-4500 high pressure blower, 7"x16", TOSHIBA 40 hp/1760 rpm, w/STODDARD L61H8 silencer, s/n: 135321
  • RADER 20-25 ESV chip feeder w/motor to reducer, STODDARD D35T8 silencer, s/n: 3806

Blower - Cyclone - Wig Wag
  • Approximately 48" low pressure blower, 75 hp/1775 rpm
  • Approximately 8' diameter cyclone
  • Single station wig wag railroad car loading station w/PORTLAND IRON WORKS rail car moving winch, controls
  • Approximately 800' of 6"-24" low pressure blowpipe

Compressors - Air Dryer - Air Receivers
  • 1993 QNW 370D rotary screw compressor, 75 hp, 16,316 hrs, s/n: 93022
  • 1985 QUINCY 740B rotary screw compressor, 150 hp, 31,037 hrs, s/n: 85041
  • HANKISON DH370 twin tower compressed air dryer, 370 cfm @ 100 psi, s/n: 33366-9304-2
  • HANKISON DH750 twin tower compressed air dryer, 750 cfm @ 100 psi, s/n: 3339-6-9204-1
  • 4'x10', (2) 4'x8', 3'x6' air receivers

Fuel Tank
  • 1996 ACE Fireguard light weight 1000 gallon double wall split fuel tank, approximately 49-1/2"x69"x129", (2) TUTHILL series 700B fuel pumps

Dehumidifying Kilns
  • (2) 1993 LEBAC NF4 dehumidifying kilns w/(2) dehumidifying units, (16) 24" fans per kiln, (2) fan motor controllers, (6) humidity sensors, (24) 42"x102" tube constructed kiln carts, 7' rail spacing, SIEMENS ITE 400 amp 1-section main w/400 , (2) 200 amp switches, 480/277 volts, wood framed 24'x72' kiln drying area

Moulder Line
  • WEINIG 23, 7-head moulder, bottom head 17-1/2 kw, (2) right heads, (2) left heads 11 kw, top 18-1/2 kw, bottom 15 kw head, (5) sets feed & press rolls, adjustable speed controls, 16' single feed roll moulder table, (6) hydraulic driven canted rolls, 8"x20' slow down belt, adjustable speed motor, 15 hp hydraulic unit, 31' 4-strand H78 infeed transfer, 4'x10' hydraulic operated scissor lift tilt hoist, 14' 4-strand H78 infeed transfer, 5' 4-strand H78 transfer, 4-strand tipple, 7' 5-strand jack ladder outfeed transfer, hydraulic drives, controls, electrics, (50+) hydro-lock 4-knife moulder heads, knives, spares, s/n: 023-819

Double End Trimmer Line
  • Custom built adjustable length double end trimmer, 6" diameter to 12' length capacity, (2) 14" pneumatic jump chop saws w/adjustable saw, LS&L, 18"x18", 6"x12' clean out belts, 4'x5' scissor lift, 19' 2-strand poly chain infeed transfer, drives, controls

Cut Off Saws - Canter
  • Custom built log profile left hand pneumatic jump cut off saw, 3-1/2"x12' in & outfeed belts, auto stop gauges to 10', 18' 5-strand outfeed transfer
  • Custom built left hand pneumatic jump chop saw w/2-station adjustable drill, gravity in & out rolls, clean out belt
  • IRVINGTON right hand pneumatic jump chop saw w/7"x10' in and outfeed belts
  • 6"x8' 2-sided log canter w/(2) 15 hp traveling saws

Routers
  • Custom built dual board double end router, 6"-83" adjustable, (4) router heads, 360¯ board turners, pneumatic board clamps, ALLEN BRADLEY Panel View 550 controls, electrics
  • Custom built dual board single end router, 6"-83" adjustable, (2) router heads, 360¯ board turners, pneumatic board clamps
  • ONSRUD R0117H over arm pin router, s/n: 8515

Drills
  • CROWN MACHINE classic end dogging side drill, 6"x12' capacity, (2) banks of 10 spindles, (2) 20 hp/1160 rpm spindle drives, hold downs, LS&L, 5 hp hydraulic unit
  • AST center log bore drill, (3) traveling drill heads, BALDOR 20 hp/1760 rpm, 6"x13' capacity, pneumatic log raising clamps, vacuum blower, 3'x6' scissor lift
  • Custom built 2-tier horizontal multi spindle drill, 3-1/2" thickness x 66" length capacity, 5 hp on common vertical shift to multi positioned belt driven drill spindles, (4) aluminum drill patterns w/13, 11, 8, & 6 drill spindles
  • AMERICAN MACHINE 60" horizontal drill station w/(3) FOREST CITY TOOL multi spindle horizontal drill heads, 8, 4, & 4 spindles
  • Custom built 9' PRECISION table w/ELLIS 8500 20" drill press
  • (2) hand drill stations w/patterns

Profiler
  • ONSRUD W684H hydraulic contour profiler, 0"-6" depth cut, 84" length, 1-1/2" pattern thickness capacity, 0-80 fpm table speeds, 20 hp/7200 rpm cutter head, MG set, 5 hp hydraulic unit, pneumatic clamps, s/n: 9227

Grinding Room
  • 1993 WEINIG RONDAMAT 925 profile grinder, s/n: 925408
  • NEWMAN G200 rotary tub grinder, s/n: 200136
  • WADKINS NH1212 profile grinder, s/n: 87531
  • ARMSTRONG No. 54 circle saw sharpener, s/n: 14140
  • JA RICHARDSON profile grinder
  • (50+) hydro lock moulder heads, 4-knife, 2-1/2"-9"
  • Spare band & round saws; babbit pot; pouring tools; carbide bits; knives

Machine Shop
  • 1998 KINGSLAND 50XA, 45 ton hydraulic iron worker, 1-13/16"x5/8" punch, 3" section cutting, 12"x1/2" flatbar shearing, 2"x1/4" angle cutting, s/n: 958898
  • 1990 FREJOTH universal mill, 80-5440 rpm, 3 hp head, 9"x42" power T-slot table, 6" radial table, machinist vise, s/n: 2404
  • LOGAN 6520 engine lathe, 20"x65", 350-2000 rpm, 3 & 4-jaw chucks, tool post, tail stock, s/n: 85571
  • ELLIS 12000 16" swing drill press w/power feed, 125-2500 rpm, 14"x17" T-slot table
  • WELLS 8H horizontal metal cutting bandsaw
  • DAYTON 25 ton shop press

Electrics
  • SIEMENS ITE 400 amp main w,400, (2) 200 amp switches, 480-277 switches
  • SAFTRONICS 100 hp soft start
  • Starters & disconnects to 150 hp
  • Motors to 150 hp; lasers; much more

Transfers - Conveyors - Rollcases
  • 24' 4-strand H78 transfer w/motor to reducer
  • 21' 4-strand H78B transfer w/motor to reducer
  • 16' 5-strand H124 jack ladder transfer w/motor to reducer
  • 16' 4-strand transfer w/4-arm tipple, motor to reducer
  • 13' 4-strand H84 w/lugs, transfer, 2' 4-arm tipple, motor to reducer
  • 10' 5-strand H78 w/flites, jack ladder transfer, motor to reducer
  • 7' 3-strand H138 transfer w/motor to reducer
  • 65' H78 w/flites, clean out conveyor, motor to reducer
  • 50' 6"x11" box chain clean out conveyor w/HITACHI 15 hp/60 rpm gearhead motor
  • 45' 6"x11" box chain clean out conveyor
  • 60' rollcase w/(20) 8-1/2"x60" rolls, 6' 3-strand jump transfer
  • 54' rollcase w/(18) 6"x42" rolls

Miscellaneous Tools, Supplies, Assorted Machinery
  • Custom built double end log chamfer w/cone type routers, 6"-12' capacity, 3-1/2"x25' belt conveyor
  • Custom built single end log chamfer
  • Custom built 4-sided log profile flap sanding station w/adjustable speed drives, powered top feed rolls, 5"x18' in & outfeed belts
  • Custom built end reduction machine, (2) stackable heads, 3"x48"
  • Custom built log sort station w/16' 2-strand H78 transfer, 4'x5', (2) 3'x6' scissor lifts, (2) 3-1/2"x25' sorting transfer belts
  • Dual drill bridge log machine 3-5/8"x48" capacity
  • Approximately 30" diameter long neck cyclone w/4-bag dust collector
  • 3'x4' scissor lift - GRIZZLY dual bag dust collector - (2) GRIZZLY G8027 single bag dust collectors - MAGNA single spindle shaper - WHITNEY no. 77 table saw, s/n: 13782 - 14" vertical wood bandsaw - JET 6"x89", ELEPHANT 6" belt sanders - RANGER 9 250 amp/9000 watt welder/generator - oxy-acetylene set - HEATH ULTRAGRAPH UG56 RC series single head pattern burner - LINCOLN LN25 wire feeder - PARKER hose crimper - 2" vertical belt sander - double end grinders - vises - anvils - SPEEDAIRE paint pot - GRAYMILLS parts washer - LINCOLN grease pump - floor jack - (2) JET PT2748, 5500 lb pallet jacks - ECHO CS4600, HOMELITE 3300 24" chain saws - JET 1 ton electric chain hoist - CH 33 gpm 1/2 hp paint pump - DELTA 15" drill press - welding wire & rod - TWECO mig gun - SOLAR FLEET charger booster - come-alongs - pipe clamps - hand tools - shop heaters - parts drawers - nuts & bolts bins - tool boxes - rolling steel tables - benches - lockers - assorted steel - material racks - quantity 1"x1-1/2"x50" stickers - pallets - crates - yard bunks - lathe stickers, 1/4"x1-1/2"x assorted - log cones & ends - lumber covers - storage tanks - ECO blocks - pressure treated lumber bin walls - WESCO 600 lb drum stands - quantity of banding carts & banding tools - catwalk - stairs - mirrors - (3) 4'x12', (2) 4'x8' crazy wheel lumber carts - office furniture & equipment - PORTER CABLE, BLACK & DECKER 14" chop saws - BANNER B65115 10 ton porta power body repair kit - too much more to list

Rolling Stock
  • 1986 CAT IT12 integrated tool carrier, CAT 3204 diesel engine, 8' bucket, enclosed cab, 15.5-25 tires, grapple forks available, 7087 hrs, s/n: 4NC00465
  • NISSAN 90 BGF-03A40V 8000 lb dual pneumatic forklift, 188" 3-stage mast, 48" forks, s/n: BCF03-920187
  • DATSUN 8000 UF03 8000 lb propane forklift, solid front lines, pneumatic rear tires, 130" 3-stage mast, 6' forks, s/n: UF037000376
  • CLARK C500-50 4000 lb HRT propane forklift, 188" 3-stage mast, s/n: 355-252-4381 w/BRANDT BD65 bin dumper, 1500 lb capacity, s/n: 52173

To be Sold Subject to First Right of Refusal
  • Custom built EAGLE end dogging side drill, 6"x12' capacity, (2) banks of 12 spindles at 1' spacing, 180¯ positioning rolls, hold downs, ejectors, LS&L, 4'x8' scissor lift (to be sold subject to $5000 reserve bid, due to first right of refusal)

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Friday, May 18.
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #48

DRIVER DIRECTIONS
  • From north or southbound Alt Hwy 97 in Entiat, turn east on Risk St and drive 1 block to the auction site.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2006 James G. Murphy Co.
All rights reserved worldwide