|
LOT# |
QTY. |
DESCRIPTION |
| 1 | 1 | SIGNODE PNEUMATIC STRAPPING CRIMPER |
| 2 | 1 | SIGNODE PNEUMATIC STRAPPING CRIMPER |
| 3 | 1 | SIGNODE PNEUMATIC STRAPPING CRIMPER |
| 4 | 1 | SIGNODE STRAPPING TIGHTENER & CRIMPER |
| 5 | 1 | STRAPPING TIGHTENER |
| 6 | 1 | STRAPPING TIGHTENER |
| 7 | 1 | STRAPPING CRIMPER |
| 8 | 1 | STRAPPING CRIMPER |
| 9 | 1 | PIPE THREADER RATCHET W/DIES |
| 10 | 1 | PIPE THREADER RATCHET W/DIES |
| 11 | 1 | LOT, ASSORTED RAG BINS |
| 12 | 1 | LOT, PEER ROLLER CHAIN IN THESE (2) BOXES |
| 13 | 1 | LOT, LINK BELT ROLLER CHAIN IN THESE (5) BOXES |
| 14 | 1 | LOT, BEARINGS IN THESE (4) BOXES |
| 15 | 1 | PNEUMATIC GREASE GUN |
| 16 | 1 | LOT, ASSORTED GREASE GUNS |
| 17 | 1 | LOT, METAL SAW HORSES W/WOOD TABLE |
| 18 | 1 | LOT, ASSORTED GREASE BARREL DISPENSERS |
| 19 | 1 | PARTS WASHER |
| 20 | 1 | HOSE CUTTING SAW |
| 21 | 1 | H-PRESS FRAME |
| 22 | 1 | LOT, ASSORTED PARTS ON THIS SHELVING UNIT |
| 23 | 1 | STEEL TABLE ON CASTORS |
| 24 | 1 | STEEL TABLE W/PIPE VISE |
| 25 | 1 | HEALTH ENGINEERING OXY/ACET CUTTING TABLE |
| 26 | 1 | SINGLE PEDESTAL VISE |
| 27 | 1 | SINGLE PEDESTAL VISE |
| 28 | 1 | METAL STAND ON CASTORS |
| 29 | 1 | LOT, ASSORTED STANDS IN TAPED AREA |
| 30 | 1 | LOT, ASSORTED PARTS ON THIS WALL SECTION |
| 31 | 1 | WELDING ROD CABINET |
| 32 | 1 | LOT, ASSORTED STEEL IN TAPED AREA |
| 33 | 1 | LOT, ASSORTED STAND IN TAPED AREA |
| 34 | 1 | LOT, ASSORTED SUPPLIES IN THIS CABINET |
| 35 | 1 | LOT, ASSORTED SUPPLIES IN THIS CABINET |
| 36 | 1 | LOT, ASSORTED SUPPLIES ON THIS CABINET |
| 37 | 1 | LOT, CONTENTS OF THIS OFFICE |
| 38 | 1 | LOT, LOOSE ITEMS IN THIS ROOM |
| 39 | 1 | LOT, SUPPLIES ON THIS SHELVING UNIT |
| 40A | 1 | LOT, SUPPLIES IN THIS 10-DOOR CABINET |
| 40B | 1 | LOT, LOOSE ITEMS IN THIS ROOM |
| 40C | 1 | LOT, WOOD, METAL SHELVING & CABINETS IN THIS ROOM |
| 41 | 1 | 20'- 6 STRAND H124 CHAIN LOG DECK W/H&T SPROCKETS, S-DRIVE, STEEL RACES, MARKED STEEL LEGS |
| 42 | 1 | 30'-6 STRAND H124 CHAIN LOG DECK W/H&T SPROCKETS, S-DRIVE, STEEL RACES, MARKED STEEL LEGS |
| 43 | 1 | LOG STOP & LOADER W/CYLINDER |
| 44 | 1 | NO DATA MOTOR & REDUCER W/ DRIVE CHAIN (LOT 41 DRIVE) |
| 45 | 1 | G.E. 20HP MOTOR W/FALK 15HP/86.5:1 RATIO REDUCER, DRIVE CHAIN (LOT 42 DRIVE) |
| 46 | 1 | 54'-H110 DRAG CHAIN LOG HAUL CONVEYOR W/H&T SPROCKETS, S- DRIVE, STEEL TROUGH, 10HP DRIVE MOTOR |
| 47 | 1 | 48" INSERT TOOTH LOG CUT OFF CIRCULAR CHOP SAW W/75HP DRIVE MOTOR, LOG CRADLE, SCANNER BARS |
| 48 | 1 | 28' TWIN STRAND H124 CHAIN SAW OUTFEED LOG HAUL CONVEYOR W/H& T SPROCKETS, S-DRIVE, LOG LENGTH STOP PINS W/CYLINDERS, (2) 4 ARM LOG KICKERS W/ CYLINDERS, MARKED STEEL LEGS |
| 49 | 1 | TOSHIBA 10HP MOTOR W/DODGE 31.4:1 RATIO REDUCER, DRIVE CHAIN (LOT 48 DRIVE) |
| 50 | 1 | 25'X16" BELT CONVEYOR W/H&T DRUMS, STEEL TROUGH, LOG KICKERS, STEEL LOG SLIDE, MARKED STEEL LEGS |
| 51 | 1 | TOSHIBA 10HP MOTOR W/DODGE 31.4:1 RATIO REDUCER, DRIVE CHAIN (LOT 50 DRIVE) |
| 52 | 1 | 19'-4 STRAND H124 CHAIN CROSS OVER DECK W/H&T SPROCKETS, S- DRIVE, STEEL RACES, MARKED STEEL LEGS |
| 53 | 1 | LOG STOP & LOADER W/CYLINDER |
| 54 | 1 | 10HP MOTOR W/WESTINGHOUSE 70.6:1 RATIO REDUCER, DRIVE CHAIN (LOT 52 DRIVE) |
| 55 | 1 | 23'-H102 DRAG CHAIN LOG HAUL CONVEYOR W/H&T SPROCKETS, HOURGLASS ROLL, STEEL TROUGH, MARKED STEEL LEGS |
| 56 | 1 | WESTINGHOUSE 7-1/2HP MOTOR W/SM CYCLO 35:1 RATIO REDUCER, DRIVE CHAIN (LOT 55 DRIVE) |
| 57 | 1 | 1987 NICHOLSON A5 22"-5 ARM RING DEBARKER W/ SLIDE OUT RING, 100HP AC RING DRIVE, 80HP FEED ROLL DRIVE, LUBE SYSTEM DOWNSTAIRS W/SHACK 5537 |
| 58 | 1 | CUTLER HAMMER 5 SECTION-18 STATION MOTOR CONTROL CENTER (IN CONTROL BOOTH) |
| 59 | 1 | WESTINGHOUSE 600 AMP ADJUSTABLE TRIP CIRCUIT BREAKER (IN BOOTH) |
| 60 | 1 | LOT, (2) MONITORS IN BOOTH W/ CAMERA UNDER DEBARKER |
| 61 | 1 | DEBARKER AREA CONTROL BOOTH W/ PUSH BUTTON CONTROL PANEL, CHAIR, LIGHTING ELECTRICS, AIR CONDITIONER |
| 62 | 1 | LOT, EXPANDED METAL CATWALKS & STAIRWAYS IN (2) DEBARKER AREAS |
| 63 | 1 | LOT, LOGS ON LOG DECKS IN DEBARKER/CUT OFF SAW DECK AREAS |
| 64 | 1 | LOT, YARD LIGHTS W/(2) POLES IN (2) DEBARKER AREAS (NO WIRE) |
| 65 | 1 | 93'-H102 DRAG CHAIN DEBARKER OUTFEED LOG HAUL CONVEYOR W/H& T SPROCKETS, STEEL TROUGH, LOG BUNK AT END OF CONVEYOR, MARKED STEEL LEGS (NO KICKERS) |
| 66 | 1 | 15-1/2' LOG KICKER W/CYLINDER (ON LOT 65) |
| 67 | 1 | 15-1/2' LOG KICKER W/CYLINDER (FAR END OF LOT 65) |
| 68 | 1 | SKK 5HP/25.735:1 RATIO GEARHEAD MOTOR, DRIVE CHAIN (LOT 65 DRIVE) |
| 69 | 1 | 24'-H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS, STEEL TROUGH & SLOPES (DOWNSTAIRS) |
| 70 | 1 | SKK 3HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 69 DRIVE) |
| 71 | 1 | 14'-H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS, STEEL TROUGH & SLOPES |
| 72 | 1 | SKK 3HP/25.735:1 RATIO GEARHEAD MOTOR, DRIVE CHAIN (LOT 71 DRIVE) |
| 73 | 1 | 67'-H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS, STEEL TROUGH |
| 74 | 1 | SKK 7-1/2HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 73 DRIVE) |
| 75 | 1 | SAS HYDRAULIC SUPPORT UNIT FOR DEBARKER/CUT OFF SAW AREA W/ (2) APPROX. 50HP PUMPS |
| 76 | 1 | LOT, ASSORTED DEBARKER PARTS W/SHELVING & CABINETS (REMAINING UNSOLD CONTENTS OF ROOM) |
| 77 | 1 | 20'-5 STRAND H124 CHAIN LOG DECK W/H&T SPROCKETS, S-DRIVE, STEEL RACES, MARKED STEEL LEGS |
| 78 | 1 | 30'-5 STRAND H124 CHAIN LOG DECK W/H&T SPROCKETS, S-DRIVE, STEEL RACES, MARKED STEEL LEGS |
| 79 | 1 | LOG STOP & LOADER W/CYLINDER |
| 80 | 1 | TOSHIBA 10HP MOTOR W/FALK 10HP/30RPM REDUCER, DRIVE CHAIN (LOT 77 DRIVE) |
| 81 | 1 | SIEMENS 10HP MOTOR W/SM CYCLO 15HP/11: 1 RATIO REDUCER, DRIVE CHAIN (LOT 78 DRIVE) |
| 82 | 1 | 50'-H480 DRAG CHAIN DEBARKER INFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, S-DRIVE, STEEL TROUGH, MARKED STEEL LEGS, 20HP DC DRIVE MOTOR |
| 83 | 1 | SODERHAMN 40"-4 ARM RING DEBARKER W/60HP AC RING DRIVE, DC FEED CHAIN DRIVE W/REDUCER, MG SETS IN DOWNSTAIRS ROOM (HYD SUPPORT SOLD AT LOT 96) |
| 84 | 1 | ALLEN BRADLEY 14 STATION MOTOR CONTROL CENTER |
| 85 | 1 | LUBE UNIT |
| 86 | 1 | HOSE REEL |
| 87 | 1 | LOT, (2) MONITORS IN ROOM |
| 88 | 1 | WOOD FRAMED CONTROL BOOTH W/ REMAINING CONTENTS NOT ALREADY SOLD |
| 89 | 1 | 18'-H480 DRAG CHAIN DEBARKER OUTFEED LOG HAUL CONVEYOR W/H& T SPROCKETS, STEEL TROUGH, MARKED STEEL LEGS |
| 90 | 1 | G.E./SAFTRONICS 20HP DC MOTOR W/LINKBELT REDUCER, DRIVE CHAIN (LOT 89 DRIVE) |
| 91 | 1 | 7' BAR CHAIN LOG CUT OFF SAW W/15HP MOTOR, LOG CRADLES |
| 92 | 1 | 21'-H480 DRAG CHAIN SAW OUTFEED LOG HAUL CONVEYOR W/H& T SPROCKETS, S-DRIVE, MARKED LEG SUPPORTS |
| 93 | 1 | LOT, (5) HYDRAULIC OPERATED LOG LENGTH STOP CYLINDERS W/ SUPPORT FRAMEWORK |
| 94 | 1 | SKK 5HP/25.735:1 RATIO GEARHEAD MOTOR W/DRIVE CHAIN (LOT 92 DRIVE) |
| 95A | 1 | MDI #CR85 WRAP AROUND WHOLE LOG METAL DETECTOR W/48"X56" I.D. SEARCH COIL, 15'X34" FEED THRU BELT CONVEYOR, MARKED STEEL LEGS (NO DRIVE) |
| 95B | 1 | SKK GEARHEAD MOTOR, DRIVE CHAIN (LOT 95A DRIVE) |
| 96 | 1 | LOT HYDRAULIC SUPPORT UNIT FOR DEBARKER/C.O. SAW W/15HP DOUBLE PUMP, CONTENTS OF ROOM |
| 97 | 1 | 38'-H480 DRAG CHAIN MDI OUTFEED LOG HAUL CONVEYOR W/H& T SPROCKETS, S-DRIVE, MARKED STEEL LEGS (NO LOG KICKERS) |
| 98 | 1 | 23' CHAIN DRIVEN HOURGLASS ROLLCASE W/5 ARM LOG KICKER, MARKED STEEL LEGS |
| 99 | 1 | 65'-H112 DROP CHAIN WASTE CONVEYOR W/H&T SPROCKETS, STEEL TROUGH |
| 100 | 1 | TOSHIBA 5HP MOTOR W/DODGE 31.4:1 RATIO REDUCER, DRIVE CHAIN (LOT 99 DRIVE) |
| 101 | 1 | LOT, LOG KICKERS W/CYLINDERS ON LOT 97 CONVEYOR W/ DISMANTLED CYLINDERS, VALVES, ACCUMULATOR TANK ON GROUND |
| 102 | 1 | SKK 5HP/45RPM GEARHEAD MOTOR W/ DRIVE CHAIN, CONVEYOR DRUM ROLL |
| 103 | 1 | APPROX. 95' H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS S-DRIVE, STEEL TROUGH |
| 104 | 1 | TOSHIBA 10HP MOTOR W/SM CYCLO NO DATA REDUCER, DRIVE CHAIN (LOT 103 DRIVE) |
| 105 | 1 | APPROX. 75' TWIN STRAND H110 DRAG CHAIN CONVEYOR W/H&T SPROCKETS, S-DRIVE, STEEL TROUGH, CATWALK |
| 106 | 1 | TOSHIBA 10HP/1730RPM MOTOR W/DRIVE CHAIN (LOT 105 DRIVE) |
| 107 | 1 | HYDRAULIC OPERATED CHIP BIN W/15HP HYDRAULIC SUPPORT UNIT (PLEASE PREVIEW!-SOLD FROM LOT 106 AREA) |
| 108 | 1 | APPROX. 75' H110 DRAG CHAIN CONVEYOR W/H&T SPROCKETS, S- DRIVE, STEEL TROUGH |
| 109 | 1 | SKK 3HP/25.735:1 RATIO GEARHEAD MOTOR, DRIVE CHAIN, (LOT 108 DRIVE) |
| 110 | 1 | FULLER SIZE 12"X30" HIGH PRESSURE ROTARY LUBE BLOWER W/125HP DRIVE MOTOR, AIR INTAKE, SILENCER, INJECTION PIPE |
| 111 | 1 | 20"X24" CHIP FEEDER W/MOTOR, REDUCER, INJECTOR PIPE, INFEED CHUTE |
| 112 | 1 | SURGE BIN W/(2) AUGER CLEAN OUT, MOTOR, SM CYCLO REDUCER |
| 113 | 1 | LAMB 36" DROP FEED, BOTTOM DISCHARGE HAMMER HOG W/INFEED CHUTE (SPARE HAMMERS SOLD AT LOT 124) 790414-1 |
| 114 | 1 | TOSHIBA 300HP/1185RPM HOG DRIVE MOTOR W/COUPLER |
| 115 | 1 | STEEL SUPPORT STAND UNDER HOG W/CATWALK, (3) ATTACHED LADDERS |
| 116 | 1 | 2-WAY CHIP DIVERTER |
| 117 | 1 | LOT, BLOWPIPE FROM FEEDER INJECTION PIPE TO DIVERTER, FROM DIVERTER TO CHIP BIN, FROM DIVERTER TO TOP OF FUEL SILO |
| 118 | 1 | "RADAR" CHIP MONITORING PANEL W/ATTACHED PUSH BUTTON PANEL |
| 119 | 1 | ALLEN BRADLEY SIZE 6 REDUCED VOLTAGE STARTER W/PCB FREE CAPACITOR |
| 120 | 1 | ALLEN BRADLEY 3-SECTION, 10 STATION MOTOR CONTROL CENTER |
| 121 | 1 | WELDED STEEL FRAME ELECTRICAL BUILDING |
| 122 | 1 | LOT, SINGLE PHASE BARREL MIXERS W/BARRELS (IN SILO) |
| 123 | 1 | NO DATA HIGH PRESSURE PUMP |
| 124 | 1 | LOT, HOG HAMMERS |
| 125 | 1 | LOT, IRON OUT RUST & STAIN REMOVER |
| 126 | 1 | FALK 40:1 RATIO REDUCER |
| 127 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES-REMAINING LOOSE CONTENTS UNDER SILO NO ALREADY SOLD |
| 128 | 1 | WELLONS CONE BOTTOM FUEL SILO W/ MOTORIZED ROTARY DISCHARGE 9702B-B |
| 129 | 1 | WELLONS CONE BOTTOM FUEL SILO W/ MOTORIZED ROTARY DISCHARGE, 2 AUGER CLEAN OUT W/DRIVES, ATTACHED ELECTRICS 9702B-A |
| 130 | 1 | LOT, (3) MALONEY 500 KVA 12,000 TO 480 VOLT 3 PHASE TRANSFORMERS W/POLES & INSULATORS (NO WIRE) LESS THAN 50 PPM PCB CONTENT (BUYER ASSUMES ALL RESPONSIBILITY ON AWARD OF BID) |
| 131 | 1 | 24'-H110 DRAG CHAIN CONVEYOR FEEDING SILO W/H&T SPROCKETS, STEEL TROUGH, NO DATA OLDER U.S. GEARHEAD MOTOR |
| 132 | 1 | APPROX. 50' H480 DRAG CHAIN CONVEYOR FROM LOT 129 SILO W/ H&T SPROCKETS, UHMW LINED STEEL TROUGH, D.C. DRIVE MOTOR |
| 133 | 1 | LOT, LOOSE CONTENTS OF BOILER BUILDING OFFICE W/AIR CONDITIONER |
| 134 | 1 | LOT, NEBRASKA 50,000 PPH/250 PSI BOILER W/WELLONS STOKER |
| 135 | 1 | LOT, STOKER FEED SYSTEM W/8' AUGER FEEDING STACKER W/AC MOTOR & REDUCER, (2) 6' AUGERS FEEDING 8' AUGER (UPSTAIRS) W/ 3HP DC MOTOR & REDUCER W/FRANK ELECTRIC DC MOTOR CONTROLLER BY SHIPPING DESK DOWNSTAIRS |
| 136 | 1 | LOT, STOKER FEED SYSTEM W/8' AUGER FEEDING STACKER W/AC MOTOR & REDUCER, (2) 6' AUGERS FEEDING 8' AUGER (UPSTAIRS) W/ 3HP DC MOTOR & REDUCER W/FRANK ELECTRIC DC MOTOR CONTROLLER BY SHIPPING DESK DOWNSTAIRS |
| 137 | 1 | LOT, STOKER FEED SYSTEM W/8' AUGER FEEDING STACKER W/AC MOTOR & REDUCER, (2) 6' AUGERS FEEDING 8' AUGER (UPSTAIRS) W/ 3HP DC MOTOR & REDUCER W/FRANK ELECTRIC DC MOTOR CONTROLLER BY SHIPPING DESK DOWNSTAIRS |
| 138 | 1 | H480 DRAG CHAIN CONVEYOR FEEDING STOKER AUGERS W/H&T SPROCKETS, STEEL TROUGH, 7-1/2HP MOTOR, NO DATA FALK REDUCER, (LOCATED UPSTAIRS- SOLD FROM DOWNSTAIRS-PLEASE PREVIEW!) |
| 139 | 1 | TWIN CITY SIZE 182 HEAT EXHAUST BLOWER W/ 7-1/2HP MOTOR (LOCATED UPSTAIRS-SOLD FROM DOWNSTAIRS- PLEASE PREVIEW!) |
| 140 | 1 | STICKLE #51VSH 12'X6' DIA. SPRAY TYPE DEAERATING FEED WATER HEATER (LOCATED UPSTAIRS-SOLD FROM DOWNSTAIRS-PLEASE PREVIEW!) |
| 141 | 1 | 40HP FEED WATER PUMP |
| 142 | 1 | 40HP FEED WATER PUMP |
| 143 | 1 | 7-1/2HP FEED WATER PUMP |
| 144 | 1 | 7-1/2HP FEED WATER PUMP |
| 145 | 1 | LOT, (5) ASSORTED WATER TREATMENT TANKS IN ROW W/ CONNECTED PIPEWORK |
| 146A | 1 | LOT, (4) ASSORTED TANKS IN ROW |
| 146B | 1 | HACH #1220 WATER HARDNESS MONITOR |
| 147 | 1 | WESTINGHOUSE NUMA LOGIC PL900 PROGRAMMABLE CONTROLLER W/TRANSFORMER |
| 148 | 1 | FRANK ELECTRIC 3HP DC MOTOR CONTROLLER |
| 149 | 1 | MGM 25KVA 240X480 TO 120/240V SINGLE PHASE TRANSFORMER W/ BREAKER PANEL |
| 150 | 1 | BOILER BUILDING MCC PANEL W/ WESTINGHOUSE STARTERS & BREAKERS, ADJUSTABLE TRIP, MAIN BREAKER |
| 151 | 1 | G.E. PANATROL BOILER/STOKER MONITOR PANEL |
| 152 | 1 | ALLEN BRADLEY 115 AMP OUTPUT VARI-SPEED MOTOR CONTROLLER W/TRANSFORMER COIL, CABINET |
| 153 | 1 | ALLEN BRADLEY 52 AMP OUTPUT VARI-SPEED MOTOR CONTROLLER |
| 154 | 1 | 6' POLY TANK |
| 155 | 1 | SINGLE PHASE MIXER |
| 156 | 1 | LOT, EMPLOYEE LOCKERS, SHIPPING DESK, MISC. MILL PARTS, "LOOSE CONTENTS OF BOILER BUILDING NOT ALREADY SOLD" |
| 157 | 1 | APPROX. 48'X32'X45' EAVE BOLTED & WELDED STEEL BOILER BUILDING W/2ND & 3RD FLOOR LANDINGS, STAIRWAYS, REMAINING INSTALLED ASSETS NOT ALREADY SOLD, PIPING, VALVES, GRAPHS, ETC. |
| 158 | 1 | FLY ASH COLLECTION SYSTEM W/ COLLECTION HOPPER, (3) ASSORTED BLOWERS, STACK, DUCT WORK TO BOILER |
| 159 | 1 | 25' AUGER CONVEYOR W/MOTOR, SHAFT MOUNT REDUCER |
| 160 | 1 | LOT, ROLLING STOCK FILTERS, OILS, MISC. CONTENTS INSIDE BUILDING |
| 161 | 1 | 21'X21' WOOD FRAMED, GALVANIZED METAL COVERED BUILDING W/LIGHTS, HEATERS, SPRINKLERS, ATTACHED LEAN-TO |
| 162 | 1 | LOT, ASSORTED ROLLCASE ROLLS |
| 163 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES-REMAINING UNSOLD LOOSE CONTENTS UNDER LEAN-TO |
| 166 | 1 | TATUNG 7-1/2HP MOTOR W/SM CYCLO 13:1 RATIO REDUCER, DRIVE CHAIN (LOT 165 DRIVE) |
| 167 | 1 | 11'-H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS, STEEL TROUGH |
| 168 | 1 | SKK 3HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 167 DRIVE) |
| 169 | 1 | SKK 5HP/56RPM GEARHEAD MOTOR W/H110 CONVEYOR SPROCKET |
| 170 | 1 | 8'X42" DIA. AIR RECEIVER TANK |
| 171 | 1 | HANKISON #1309 OIL REMOVAL FILTER |
| 172 | 1 | WELL-RITE PRESSURIZED WATER HOLDING TANK |
| 173 | 1 | APPROX. 138'X18" BELT CONVEYOR LEAVING MILL W/H&T DRUMS, STEEL TROUGH, CONVEYOR COVER, MARKED STEEL LEGS |
| 174 | 1 | ELECTRIC MOTOR W/DODGE TM REDUCER |
| 175 | 1 | ITE 1000 AMP ADJUSTABLE TRIP CIRCUIT BREAKER (INSIDE MILL) |
| 176 | 1 | WESTINGHOUSE 400 AMP ADJUSTABLE TRIP CIRCUIT BREAKER |
| 177 | 1 | CUTLER HAMMER 400 AMP FUSED DISCONNECT SWITCH |
| 178 | 1 | CUTLER HAMMER 400 AMP FUSED DISCONNECT SWITCH |
| 179 | 1 | LOT, ELECTRICAL BUSS GUTTER BOX W/EMPTY DISCONNECT CAN (NO WIRE) |
| 181 | 1 | U.S. 300HP/1765RPM ELECTRIC MOTOR |
| 182 | 1 | 18'-4 STRAND H78 CHAIN TRANSFER W/H-SHAFT, T-SPROCKET STEEL RACES & RETURNS, MARKED STEEL LEGS |
| 183 | 1 | SKK 2HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 182 DRIVE) |
| 184 | 1 | 76' CHAIN DRIVEN ROLLCASE W/ (21) 24"X10-1/2" DIA. ROLLS |
| 185 | 1 | TOSHIBA 5HP MOTOR W/NO DATA SHAFT MOUNT REDUCER (LOT 184 DRIVE) |
| 186 | 1 | CONVEYOR MACHINERY 2-SAW SCRAGG SYSTEM W/(2) 38" DIA. 100HP LINEAR POSITIONING CIRCULAR SAWS, LEFT & RIGHT HAND LINEAR POSITIONING 6- KNIFE PRE SLABBERS, HYD DRIVEN LOG CENTERING ROLL INFEED, 21' OPENING SAW FEED THRU END DOGGER, 2-OUTFEED SLAB BELT CONVEYORS W/DRIVES, OUTFEED CANT TIPPLES W/CYLINDERS, ATTACHED HYDRAULIC SUPPORT UNIT, SAS SETWORK CONTROL PANEL IN CAB |
| 187 | 2 | LASER BLAZER LASER LIGHTS |
| 188 | 1 | 7'X8' AIR CONDITIONED CONTROL BOOTH W/CHAIR, ARM CHAIR CONTROLS (NO SAS PANEL) |
| 189 | 1 | 25'-5 STRAND H78 CHAIN LOG DECK W/H&T SPROCKETS, S-DRIVE, LOG STOP & LOADER DIAMOND PLATE, CATWALK, MARKED STEEL LEGS |
| 190 | 1 | TOSHIBA 10HP MOTOR W/DODGE MAXUM 14:1 RATIO REDUCER, DRIVE CHAIN (LOT 189 DRIVE) |
| 191 | 1 | 22'-H110 DRAG CHAIN LOG HAUL CONVEYOR W/H&T SPROCKETS, STEEL TROUGH, MARKED STEEL LEGS (OUTSIDE - SOLD FROM INSIDE-PLEASE PREVIEW!) |
| 192 | 1 | 16' LOG KICKER W/CYLINDER, VALVES, FRAME WORK |
| 193 | 1 | TOSHIBA 7-1/2HP MOTOR W/REX PLANETGEAR 10HP/43:1 RATIO REDUCER, DRIVE CHAIN (LOT 192 DRIVE) |
| 194 | 1 | LUBE PUMP |
| 195 | 1 | HOSE REEL |
| 196 | 1 | PAYNE ENGINEERING 200HP SOLID STATE REDUCED VOLTAGE-STARTER |
| 197 | 1 | PAYNE ENGINEERING 200HP SOLID STATE REDUCED VOLTAGE-STARTER |
| 198 | 1 | 13'-5 STRAND H78 ROOFTOP CHAIN TRANSFER W/H-SHAFT, T-SPROCKET STEEL RACES & PLATE |
| 199 | 1 | 16'-5 STRAND H78 CHAIN LUMBER SINGULATOR W/H&T SHAFTS, STEEL RACES & PLATE |
| 200 | 1 | TOSHIBA 5HP MOTOR W/DODGE 31.4:1 RATIO REDUCER, DRIVE CHAIN (LOT 199 DRIVE) |
| 201 | 1 | SCHURMAN 6TA24 6"X24" TOP SPLINED ARBOR BOARD EDGER W/15HP FEED ROLL DRIVE |
| 202 | 1 | MARATHON 400HP/1785RPM/460V EDGER ARBOR DRIVE MOTOR (NO DRIVE BELTS) |
| 203 | 1 | 20' EDGER FEED TABLE W/(6) 28" ROLLS, POSITIONING CHAINS, CANT FLIPPERS, SHIFTING FENCE, PUSH BUTTON CONTROL PANEL W/ CHAIR (NO DRIVES) |
| 204 | 1 | SKK 2HP/68RPM GEARHEAD MOTOR (LOT 203 POSITIONING CHAIN DRIVE) |
| 205 | 1 | SKK 5HP/100RPM GEARHEAD MOTOR (LOT 203 ROLLCASE DRIVE) |
| 206 | 5 | LASER LIGHTS W/RACK (1 LIGHT BY OPERATORS CHAIR) |
| 207 | 1 | 24' CHAIN DRIVEN EDGER OUTFEED ROLLCASE W/(9) 29"X10-1/2" DIA. ROLLS |
| 208 | 1 | SKK 5HP/155RPM GEARHEAD MOTOR (LOT 207 DRIVE) |
| 209 | 1 | SCHURMAN 4TA24 4"X24" KEYED TOP ARBOR BOARD EDGER W/NO DATA ARBOR DRIVE MOTOR, 10HP FEED ROLL DRIVE, PNEUMATIC SHIFTING SAWS, OPERATORS' CONTROL PANEL |
| 210 | 1 | 27' EDGER FEED TABLE W/(8) 29" ROLLS, LUMBER POSITIONING CHAINS, FENCE (NO DRIVES) |
| 211 | 1 | U.S. 5HP/230RPM GEARHEAD MOTOR (LOT 210 ROLLCASE DRIVE) |
| 212 | 1 | SKK 3HP/100RPM GEARHEAD MOTOR (LOT 210 ROLLCASE DRIVE) |
| 213 | 1 | SKK 1HP/88RPM GEARHEAD MOTOR (LOT 210 POSITIONING CHAIN DRIVE) |
| 214 | 2 | LASER LIGHTS |
| 215 | 1 | 29' CHAIN DRIVEN EDGER OUTFEED ROLLCASE W/EDGE PICKERS (NO DRIVE) |
| 216 | 1 | SKK 3HP/100RPM GEARHEAD MOTOR (LOT 215 DRIVE) |
| 217 | 1 | HOSE REEL BY LOT 201 EDGER |
| 218 | 1 | LOT, ELECTRIC FANS THIS STYLE IN SAWMILL |
| 219 | 1 | 31'-6 STRAND H78 CHAIN TRANSFER W/7'-3 STRAND H130 ROOFTOP CHAIN TRANSFER W/H- SHAFT, PIN STOPS, STEEL RACES & PLATE (NO TAIL SHAFT OR DRIVE) |
| 220 | 1 | 7'-4 STRAND H78 ROOFTOP CHAIN LUMBER LANDING TABLE W/H-SHAFT T-SPROCKETS, STEEL RACES & PLATE (NO DRIVE) |
| 221 | 1 | 18' CHAIN DRIVEN ROLLCASE W/ (6) 27"X10-1/2" DIA. ROLLS (AGAINST WALL BEHIND END DOGGER OUTFEED) |
| 222 | 1 | SKK 2HP/190RPM GEARHEAD MOTOR, (LOT 221 DRIVE) |
| 223 | 1 | LOT, MILL PARTS & SUPPLIES (CONTENTS OF ROOM) |
| 224 | 1 | 24" SPLINED ARBOR |
| 225 | 1 | LOT, PRE-SLABBER PARTS |
| 226 | 1 | LOT, CARBIDE TIP SPLINED ARBOR SAW BLADES |
| 227 | 1 | LOT, LOOSE CONTENTS OF LUNCH ROOM |
| 228 | 1 | LOT, SAW COLLARS (UPSTAIRS- SOLD FROM DOWNSTAIRS-PLEASE PREVIEW!) |
| 229 | 1 | LOT, MILL PARTS & SUPPLIES W/3 SECTIONS WOOD SHELF |
| 230 | 1 | LOT, BEARINGS & SEALS W/2 SECTIONS WOOD SHELF |
| 231 | 1 | LOT, AIR & HYDRAULIC SYSTEM PARTS W/2 SECTIONS WOOD SHELF, BOXES |
| 232 | 1 | LOT, (12) 42" DIA. INSERT TOOTH, SPLINED ARBOR CIRCULAR SAW BLADES W/SAW BOXES |
| 233 | 1 | SKK 3HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN |
| 234 | 1 | CME #41 BENT KNIFE GRINDER |
| 235 | 1 | 10HP HYDRAULIC SUPPORT UNIT |
| 236 | 1 | CARRIER 50'X18" BOTTOM VIBRATORY CONVEYOR W/FINES DROP OUT, DRIVE MOTOR |
| 237 | 1 | CARRIER 22'X18" BOTTOM VIBRATORY CONVEYOR W/DRIVE MOTOR |
| 238 | 1 | DRIVE MOTOR W/NO DATA SM CYCLO REDUCER, DRIVE CHAIN |
| 239 | 1 | LOT, STEAM HEATING COILS W/(2) SINGLE PHASE CIRCULATION FANS |
| 240 | 1 | APPROX. 50' H110 DRAG CHAIN CONVEYOR FEEDING SURGE BIN W/ H&T SPROCKETS, UHMW LINED STEEL TROUGH, NO DATA DRIVE MOTOR |
| 241 | 1 | KOCKUMS 66"-6 KNIFE HORIZONTAL FEED, TOP DISCHARGE CHIPPER W/DRIVE BELTS, DISCHARGE TO ROUND PIPE |
| 242 | 1 | TOSHIBA 200HP/1175RPM CHIPPER DRIVE MOTOR (NO BELTS) |
| 243 | 1 | KOCKUMS 66"-6 KNIFE HORIZONTAL FEED, TOP DISCHARGE CHIPPER W/DRIVE BELTS, OUTFEED TO ROUND PIPE |
| 244 | 1 | TOSHIBA 200HP/1180RPM CHIPPER DRIVE MOTOR (NO BELTS) |
| 245 | 1 | 95'X18" BOTTOM VIBRATORY CONVEYOR W/STEEL & FIBERGLASS TROUGHS, FINES DROP OUT, DRIVE MOTOR |
| 246 | 1 | MDI METAL DETECTOR SEARCH COIL W/ ELECTRONICS |
| 247 | 1 | 35'X18" BOTTOM VIBRATORY CONVEYOR W/STEEL & FIBERGLASS TROUGHS, SLOPES, DRIVE MOTOR |
| 248 | 1 | MDI METAL DETECTOR SEARCH COIL W/ ELECTRONICS |
| 249 | 1 | ALLEN BRADLEY 10 SECTION/30 STATION MOTOR CONTROL CENTER W/DRY CAPACITORS ONLY |
| 250 | 1 | 38'X12" BELT CONVEYOR W/H&T DRUMS, STEEL TROUGH, DRIVE MOTOR, SHAFT MOUNT REDUCER |
| 251 | 1 | IRREGULAR SHAPED H110 DRAG CHAIN FINES CONVEYOR W/H&T SPROCKETS, STEEL TROUGH |
| 252 | 1 | SKK 5HP/100RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 251 DRIVE) |
| 253 | 1 | APPROX. 128'-H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS STEEL TROUGH, 5HP DRIVE MOTOR W/JACK SHAFT REDUCTION |
| 254 | 1 | HOSE REEL |
| 255 | 1 | LOT, CATWALK & STAIRWAYS IN SAWMILL BUILDING/UP TO TRIMMER SINGULATOR |
| 256 | 1 | LOT, (3) ROUND SAFETY MIRRORS IN SAWMILL BUILDING |
| 257 | 1 | 32'-12 STRAND H78 CHAIN TRASH DECK W/H-SHAFT, T-SPROCKETS, STEEL RACES & PLATE |
| 258 | 1 | TECO 7-1/2HP MOTOR W/SM CYCLO 59:1 RATIO REDUCER, DRIVE CHAIN (LOT 257 DRIVE) |
| 259 | 1 | 35'X12" EDGER OUTFEED BELT CONVEYOR W/H&T DRUMS, STEEL TRAY |
| 260 | 1 | 18' EDGER OUTFEED ROLLCASE W/ (7) 38" CHAIN DRIVEN SPIRAL ROLLS |
| 261 | 1 | SKK 2HP/188RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 260 DRIVE) |
| 262 | 1 | 27'-5 STRAND H78 ROOFTOP LUMBER LANDING TABLE W/H-SHAFT T-SPROCKETS, STEEL RACES & PLATE |
| 263 | 1 | TOSHIBA 10HP MOTOR W/SM CYCLO 35:1 RATIO REDUCER, DRIVE CHAIN (LOT 262 DRIVE) |
| 264 | 1 | 30' CHAIN DRIVEN ROLLCASE W/ (9) 30"X10-1/2" DIA. ROLLS, LUMBER FLIPPER ARMS, LUMBER STOP GATE |
| 265 | 1 | SKK 3HP/155RPM GEARHEAD MOTOR (LOT 264 DRIVE) |
| 266 | 1 | 25'-4 STRAND H78 CHAIN TRANSFER W/H-SHAFT, T-SPROCKET STEEL RACES & RETURNS |
| 267 | 1 | SKK 3HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 266 DRIVE) |
| 268 | 1 | SCHURMAN 4TA42 4"X42" TOP ARBOR BOARD EDGER W/LINEAR POSITIONING SHIFTING SAWS, 125HP ARBOR MOTOR, 15HP FEED ROLL DRIVE |
| 269 | 1 | 15HP EDGER HYDRAULIC SUPPORT UNIT (LOCATED IN ROOM DOWNSTAIRS-SOLD BY PICTURE- PLEASE PREVIEW!) |
| 270 | 1 | 26' EDGER OUTFEED ROLLCASE W/ 43" ROLLS, EDGE PICKERS |
| 271 | 1 | 14'-6 STRAND H78 CHAIN TRANSFER W/H-SHAFT, T-SPROCKET STEEL RACES & PLATE, NO DATA STERLING GEARHEAD MOTOR |
| 272 | 1 | TIERNEY 15 KVA, 480 TO 120/240 VOLT SINGLE PHASE TRANSFORMER W/1 LARGE BREAKER PANEL |
| 273 | 1 | TIERNEY 25 KVA, 480 TO 120/240 VOLT SINGLE PHASE TRANSFORMER W/2 SMALLER BREAKER PANELS |
| 274 | 1 | 8-1/2' HIGH X 20'-10 STRAND 81X CHAIN LUMBER SINGULATOR W/ H&T SHAFTS, STEEL RACES & PLATE, TOSHIBA 10HP MOTOR W/ SM CYCLO 1750RPM REDUCER |
| 275 | 1 | 2000 HI TECH 20' INDIVIDUALLY MOTORIZED RIGHT HAND SAWMILL TRIMMER W/ 10 STRAND 81X CHAIN FEED THRU CHAIN TRANSFER W/H&T SHAFTS, END EVENING ROLLCASE, 3-STAGE LINEAR POSITIONING MINUS FENCE ATTACHED ELECTRICS |
| 276 | 1 | 2000 HI TECH COMACT TECH SCAN II 20' OPTIMIZED TRIMMER LASER SCANNER W/LENGTH, WIDTH & THICKNESS SCANNING BLOWER SYSTEM, 8 FEED THRU LUGGED CHAIN TRANSFER W/END EVENING ROLLCASE, 2 GREEN CABINETS IN OFFICE (NO H&T SHAFTS ON FEED THRU TRANSFER) |
| 277 | 1 | 2000 LUCIDYNE TECHNOLOGIES COLOR SCAN 50 GRADE MARK READER W/BLUE ELECTRICAL CABINET IN OFFICE, MONITOR |
| 278 | 1 | LOT, 20' LUG LOADER W/HEAD, TAIL & MIDDLE SHAFTS, 81X CHAIN TRANSFER INFEED W/END EVENING ROLLCASE, END EVENING CHAIN, HYDRAULIC DRIVE MOTOR |
| 279 | 1 | HYDRAULIC SUPPORT UNIT LOCATED DOWNSTAIRS FOR TRIMMER INFEED W/(1) 50HP, (1) 25HP, (1) 2HP PUMP (SOLD FROM UPSTAIRS- PLEASE PREVIEW!) |
| 280 | 1 | HOSE REEL |
| 281 | 1 | LOT, (3) DESKS, FILE CABINET, CHAIRS, BOOKCASE W/BOOKS IN OFFICE |
| 282 | 1 | LOT, LOOSE CONTENTS OF LUNCH ROOM |
| 283 | 1 | 6'-8 STRAND LUGGED 81X CHAIN TRANSFER ON TRIMMER OUTVEED W/ H&T SHAFTS, STEEL RACES, LUMBER DIVERTER GATE |
| 284 | 1 | LOUIS ALLIS 20HP MOTOR W/SM CYCLO 29:1 RATIO REDUCER (LOT 283 DRIVE- TRIMMER FEED CHAIN DRIVE) |
| 285 | 1 | 90 DEGREE TURN CHAIN TRANSFER W/HEAD SHAFT, STEEL RACES (NO TAIL SHAFT) |
| 286 | 1 | BREAKER PANEL W/FPT 37-1/2 KVA 240X480 TO 120/240V SINGLE PHASE TRANSFORMER (TRANSFORMER DOWNSTAIRS-PLEASE PREVIEW!) |
| 287 | 1 | ALLEN BRADLEY 6 SECTION 28 STATION MOTOR CONTROL CENTER |
| 288 | 1 | ALLEN BRADLEY 1336 PLUS 2 SIZE B060-AA 60HP ADJUSTABLE FREQUENCY MOTOR CONTROLLER (FOR SORTER) |
| 289 | 1 | ALLEN BRADLEY 1336 #KB50 DYNAMIC BREAK |
| 290 | 1 | G.E. 61 KVA 460 TO 460/260 VOLT TRANSFORMER UNDER CATWALK (PLEASE PREVIEW!) |
| 291 | 1 | 16'-7 STRAND LUGGED 81X CHAIN TRANSFER W/H-SHAFT, T-SPROCKET STEEL RACES, END EVENING ROLLCASE |
| 292 | 1 | SKK 3HP/155RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 291 DRIVE) |
| 293 | 1 | LOT, SPRAYERS W/PAINT POTS |
| 294 | 1 | LOT, STEEL SUB-FLOOR W/EXPANDO METAL & DIAMOND PLATE FLOORING BETWEEN TRIMMER SINGULATOR & END OF SAWMILL BUILDING |
| 295 | 1 | WOOD & STEEL FRAMED SAWMILL BUILDING FRAME WORK W/LIGHTS, AIR LINES, FIRE PROTECTION SYSTEM-BUILDING ENDS W/WALL AT START OF STARTER (NO WIRE) |
| 296 | 1 | LSI 28-BIN 20' CAP. J BAR SORTER (CONVERTED TO PUSH BAR) W/8 STRAND 81X INFEED CHAIN TRANSFER W/DIVERTER GATE, 60HP SORTER FEED TRANSFER DRIVE, 15HP HYDRAULIC SUPPORT UNIT, ONLY HI TECH ELECTRICS ATTACHED TO SORTER |
| 297 | 1 | 40'-5 STRAND 81X CHAIN LUMBER TAKE AWAY TRANSFER UNDER SORTER W/H&T SPROCKETS, S- DRIVE, UHMW LINED STEEL RACES |
| 298 | 1 | 10HP MOTOR W/SM CYCLO 43:1 RATIO REDUCER, DRIVE CHAIN (LOT 297 DRIVE) |
| 299 | 1 | 40'-5 STRAND 81X CHAIN LUMBER TAKE AWAY TRANSFER W/H-SHAFT, S-DRIVE, UHMW LINED STEEL RACES (NO TAIL SPROCKETS) |
| 300 | 1 | 10HP MOTOR W/SM CYCLO 43:1 RATIO REDUCER, DRIVE CHAIN (LOT 299 DRIVE) |
| 301 | 1 | 40'-5 STRAND 81X CHAIN LUMBER TAKE AWAY TRANSFER W/H-SHAFT, S-DRIVE, UHMW LINED STEEL RACES (NO TAIL SHAFT) |
| 302 | 1 | 10HP MOTOR W/SM CYCLO 43:1 RATIO REDUCER, DRIVE CHAIN (LOT 301 DRIVE) |
| 303 | 1 | 54'-5 STRAND 81X CHAIN LUMBER TAKE AWAY TRANSFER W/H-SHAFT, S-DRIVE, UHMW LINED STEEL RACES (NO TAIL SHAFT) |
| 304 | 1 | 10HP MOTOR W/SM CYCLO 43:1 RATIO REDUCER, DRIVE CHAIN, (LOT 303 DRIVE) |
| 305 | 1 | APPROX. 200' ALL STEEL LEAN-TO ON SITE OF SORTER BUILDING W/LIGHTS, SPRINKLER SYSTEM |
| 306 | 1 | WOOD & STEEL FRAMED SORTER/ STACKER BUILDING W/LIGHTS & SPRINKLER SYSTEM-NO LEG ON WEST SIDE/NO WALL ATTACHED TO SAWMILL BUILDING, NO WIRE |
| 307 | 1 | 18' POP UP CHAIN DRIVEN ROLLCASE W/(6) 60" ROLLS |
| 308 | 1 | SKK 3HP/68RPM GEARHEAD MOTOR (LOT 307 DRIVE) |
| 309 | 1 | 44' CHAIN DRIVEN ROLLCASE W/ (17) 60" ROLLS |
| 310 | 1 | 16'-5 STRAND 81X CHAIN TRANSFER W/H&T SPROCKETS, S- DRIVE, UHMW LINED STEEL RACES |
| 311 | 1 | SKK 5HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 310 DRIVE) |
| 312 | 1 | 8 STRAND 81X CHAIN LUMBER SINGULATOR W/H-SHAFT, OREGON TAIL BENDS, STEEL RACES & PLATE |
| 313 | 1 | TOSHIBA 15HP MOTOR W/30:1 RATIO REDUCER, DRIVE CHAIN (LOT 312 DRIVE) |
| 314 | 1 | LUNDEN 20' AUTO PLACEMENT STICKER STACKER W/6 STRAND 81X CHAIN INFEED TRANSFER W/LUMBER DEALING ARMS, TRANSFER TAIL SHAFT, W/2 STRAND STICKER PLACEMENT TRANSFER, W/5 ARM PACKAGE HOIST W/HYDRAULIC SUPPORT UNIT, W/LUNDEN MCC CABINET, ALL DRIVE MOTORS, CATWALK (NO CAPACITORS ON MCC CABINET) |
| 315 | 1 | 15'-5 STRAND H78 ROOFTOP CHAIN TRANSFER FEEDING STACKER W/ TAIL SPROCKETS, STEEL RACES, (NO HEAD SHAFT) |
| 316 | 1 | END EVENING CHAIN |
| 317 | 1 | SKK 3HP/100RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 315 DRIVE) |
| 318 | 1 | 40'-4 STRAND STACKER OUTFEED PACKAGE DECK W/H&T SPROCKETS, S-DRIVE, UHMW LINED STEEL RACES (SOLD FROM UPSTAIRS- PLEASE PREVIEW!) |
| 319 | 1 | 15HP MOTOR W/G.E. 45RPM REDUCER, DRIVE CHAIN (LOT 318 DRIVE) |
| 320 | 1 | LOT, TIERNEY 25 KVA, 480 TO 120/240 VOLT SINGLE PHASE TRANSFORMER W/BREAKER PANEL, 4 ASSORTED DISCONNECTS |
| 321 | 1 | LOT, HEATERS & FANS IN STACKER BUILDING |
| 322 | 1 | LOT, (2) SAFETY MIRRORS IN STACKER BUILDING |
| 323 | 1 | LOT, SHELVES & CABINETS ON UPPER FLOOR W/ASSORTED CONTENTS |
| 324 | 1 | LOT, CATWALK TO SORTER/STAIRS TO GROUND |
| 325 | 1 | LOT, LABELS W/APPLICATOR |
| 326 | 1 | FORK MOUNT STICKER RACK |
| 327 | 1 | LUMBER STRAPPING FRAME |
| 328 | 8 | LUMBER STACKING RACKS |
| 329 | 8 | LUMBER STACKING RACKS |
| 330 | 8 | LUMBER STACKING RACKS |
| 331 | 7 | LUMBER STACKING RACKS |
| 332 | 7 | LUMBER STACKING RACKS |
| 333 | 4 | LUMBER STACKING RACKS |
| 334 | 7 | STICKER RACKS |
| 335 | 1 | STRUCTURAL STEEL RACK |
| 336 | 1 | STEEL PLATE RACK |
| 337 | 1 | 1989 NICHOLSON A5 17" RING DEBARKER 5828 |
| 338 | 1 | WESTINGHOUSE 800HP/514RPM SYNCHRONOUS MOTOR W/WESTINGHOUSE DC GENERATOR |
| 339 | 1 | CTR #R.60 60" SWING SAW W/METAL DECK 60.077 |
| 340 | 1 | MILL SERVICE CIRCULAR SAW FRAME W/TOSHIBA 75HP 1760RPM MOTOR |
| 341 | 1 | METAL SWEEP |
| 342 | 1 | LOT, CABLE ON THIS PALLET |
| 343 | 1 | SPOOL OF CABLE |
| 344 | 1 | SPOOL OF CABLE |
| 345 | 1 | SPOOL OF CABLE |
| 346 | 1 | SPOOL OF CABLE |
| 347 | 1 | SPOOL OF CABLE |
| 348 | 1 | WESTINGHOUSE 50HP, 1775RPM MOTOR |
| 349 | 1 | TOSHIBA 25HP, 1165RPM MOTOR |
| 350 | 1 | WEG 15HP, 1765RPM MOTOR |
| 351 | 1 | WEG 10HP, 3500RPM MOTOR |
| 352 | 1 | WEG 10HP, 1765RPM MOTOR |
| 353 | 1 | RELIANCE 10HP, 1735RPM MOTOR |
| 354 | 1 | LOT, ASSORTED MOTORS ON THIS PALLET |
| 355 | 1 | COMPRESSOR HEAD |
| 356 | 1 | NEW YORK BLOWER 24" BLOWER W/LINCOLN 10HP 3535RPM MOTOR |
| 357 | 1 | QUINCY #350 COMPRESSOR HEAD |
| 359 | 1 | RADER PNEUMATICS BLOWER W/TOSHIBA 100HP MOTOR |
| 360 | 1 | LOT, DEBARKER PARTS |
| 361 | 1 | LOT, ASSORTED SPROCKETS ON PALLET |
| 362 | 1 | LOT, ASSORTED RAIL ON PALLET |
| 363 | 1 | LOT, ASSORTED ROLLS ON THIS PALLET |
| 364 | 1 | LOT, ASSORTED ROLLS ON THIS PALLET |
| 365 | 1 | LOT, HARDWARE IN THIS BIN |
| 366 | 1 | LOT, ASSORTED ROLLERS IN THIS BIN |
| 367 | 1 | LOT, BRICK ON THIS PALLET |
| 368 | 1 | LOT, BRICK ON THIS PALLET |
| 369 | 1 | LOT, BRICK ON THIS PALLET |
| 370 | 1 | LOT, BRICK ON THIS PALLET |
| 371 | 1 | LOT, CHAIN ON THIS PALLET |
| 372 | 1 | LOT, CHAIN ON THIS PALLET |
| 373 | 1 | LOT, CHAIN ON THIS PALLET |
| 374 | 1 | LOT, CHAIN ON THIS PALLET |
| 375 | 1 | LOT, CHAIN ON THIS PALLET |
| 376 | 1 | LOT, CHAIN ON THIS PALLET |
| 377 | 1 | LOT, CHAIN ON THIS PALLET |
| 378 | 1 | LOT, CHAIN ON THIS PALLET |
| 379 | 1 | LOT, CHAIN ON THIS PALLET |
| 380 | 1 | LOT, CHAIN ON THIS PALLET |
| 381 | 1 | LOT, ASSORTED PARTS ON THIS PALLET |
| 382 | 1 | LOT, ASSORTED PARTS ON THIS PALLET |
| 383 | 1 | LOT, ASSORTED PARTS ON THIS PALLET |
| 384 | 1 | LOT, ASSORTED CYLINDERS ON THIS PALLET |
| 385 | 1 | LOT, ASSORTED CYLINDERS ON THIS PALLET |
| 386 | 1 | LOT, ASSORTED CYLINDERS ON THIS PALLET |
| 387 | 1 | LOT, ASSORTED CYLINDERS ON THIS PALLET |
| 388 | 1 | LOT, SUPPLIES ON THIS PALLET |
| 389 | 1 | LOT, SUPPLIES ON THIS PALLET |
| 390 | 1 | LOT, SUPPLIES ON THIS PALLET |
| 391 | 1 | LOT, SUPPLIES ON THIS PALLET |
| 392 | 1 | LOT, SUPPLIES ON THIS PALLET |
| 393 | 1 | LOT, ASSORTED BELTS ON THIS PALLET |
| 394 | 1 | LOT, ASSORTED BELTS ON THIS PALLET |
| 395 | 1 | 26' SPREADER BAR |
| 396 | 1 | 10' SPREADER BAR |
| 435 | 1 | 117'-4 STRAND H78 GREEN CHAIN W/H-SHAFT, UHMW LINED STEEL RACES & RETURNS, CATWALK (NO TAIL SHAFT) |
| 436 | 1 | TOSHIBA 7-1/2HP MOTOR W/SM CYCLO 43:1 RATIO REDUCER, DRIVE CHAIN (LOT 435 DRIVE-PLEASE PREVIEW) |
| 437 | 1 | 4-1/2'-6 STRAND H78 ROOFTOP LUMBER LANDING TABLE W/H&T SHAFTS, STEEL RACES & PLATE |
| 438 | 1 | SKK 2HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 437 DRIVE) |
| 439 | 1 | 25'X29" BELT CONVEYOR W/H&T DRUMS, STEEL TROUGH, SLOW DOWN ROLL, ATTACHED ELECTRICS, ATTACHED LUMBER STAND & STAIRWAY |
| 440 | 1 | SKK 3HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 439 DRIVE) |
| 441 | 1 | 6'-5 STRAND H78 ROOFTOP LUMBER LANDING TABLE W/H&T SHAFTS, STEEL RACES & PLATE |
| 442 | 1 | SEW EURODRIVE 3HP/45RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 441 DRIVE) |
| 443 | 1 | G.M. 6 CYL DIESEL ENGINE W/PTA-ISD- 50 POWER TAKE OFF, EXTRA BATTERY |
| 444 | 1 | PEERLESS 1500 GPM, PTO DRIVEN CENTRIFUGAL FIRE PUMP |
| 445 | 1 | PEERLESS 1500 GPM CENTRIFUGAL FIRE PUMP W/125HP ELECTRIC MOTOR |
| 446 | 1 | PEERLESS JOCKEY PUMP W/10HP ELECTRIC MOTOR, (DISCONNECTED) |
| 447 | 1 | LEXINGTON 125HP PUMP CONTROLLER |
| 448 | 1 | FM AUTOMATIC CONTROL PANEL FOR ENGINE DRIVEN FIRE PUMP |
| 449 | 1 | BYCAN 12 VOLT DC STAND BY BATTERY CHARGER |
| 450 | 1 | LOT, (5) ASSORTED ELECTRIC BOXES |
| 451 | 1 | DIESEL FUEL TANK |
| 452 | 1 | LOT, ASSORTED UNSOLD PIPING & VALVES IN PUMP HOUSE BUILDING |
| 453 | 1 | WOOD FRAMED PUMP HOUSE BUILDING W/LIGHTS & HEATERS |
| 454 | 1 | LOT, PERFORATED UHMW SHEETING |
| 456 | 1 | LOT, SPROCKETS, MISC. MILL SUPPLIES IN ROOM |
| 457 | 1 | WOOD FRAMED, GALVANIZED METAL COVERED SPROCKET BUILDING |
| 458 | 1 | LOT, ASSORTED CONVEYOR BELTING |
| 459 | 1 | LOT, DRAG CHAIN SPROCKETS |
| 460 | 1 | G.E. 25HP/1800RPM MOTOR |
| 461 | 1 | WEG 15HP/1180RPM MOTOR |
| 462 | 1 | WEG 15HP/1180RPM MOTOR |
| 463 | 1 | TOSHIBA 20HP/1760RPM MOTOR |
| 464 | 1 | TOSHIBA 10HP/1770RPM MOTOR |
| 465 | 1 | TOSHIBA 7-1/2HP/1165RPM MOTOR |
| 466 | 1 | BALDOR 30HP/1750RPM DC MOTOR |
| 467 | 3 | ASSORTED MOTORS |
| 468 | 4 | ASSORTED MOTORS |
| 469 | 4 | ASSORTED MOTORS |
| 470 | 3 | ASSORTED MOTORS |
| 471 | 5 | ASSORTED MOTORS |
| 472 | 12 | ASSORTED MOTORS |
| 473 | 1 | LOT, ASSORTED MOTORS & REDUCERS |
| 474 | 1 | LOT, MOTORS/MISC. BETWEEN (2) SHELVING UPRIGHTS |
| 475 | 1 | SKK 10HP/45RPM GEARHEAD MOTOR |
| 476 | 1 | SKK 15HP/68RPM GEARHEAD MOTOR |
| 477 | 1 | SKK 15HP/68RPM GEARHEAD MOTOR |
| 478 | 1 | SKK 5HP/230RPM GEARHEAD MOTOR |
| 479 | 1 | SKK 3HP/155RPM GEARHEAD MOTOR |
| 480 | 1 | SKK 3HP/100RPM GEARHEAD MOTOR |
| 481 | 1 | SKK 2HP/68RPM GEARHEAD MOTOR |
| 482 | 1 | SKK 2HP/190RPM GEARHEAD MOTOR |
| 483 | 1 | SKK 3HP/155RPM GEARHEAD MOTOR |
| 484 | 1 | DODGE 5HP/68RPM GEARHEAD MOTOR |
| 485 | 1 | TOSHIBA 10HP/1165RPM MOTOR |
| 486 | 1 | LOT, ARBORS |
| 487 | 1 | LOT, SHEAVES |
| 488 | 1 | LOT, COLLARS |
| 489 | 1 | LOT, PLASTIC SPROCKETS |
| 490 | 1 | LOT, ASSORTED MILL PARTS |
| 491 | 1 | LOT, WOOD SHELVES IN AREA |
| 492 | 1 | LOT, ASSORTED ELECTRICAL CONTENTS OF (2) ADJOINING ROOMS W/SHELVES |
| 493 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES, CONTENTS OF ROOM |
| 494 | 1 | ALLEN BRADLEY 1336 PLUS 2 AC ADJUSTABLE FREQUENCY MOTOR CONTROLLER (UNDER TRIMMER OUTFEED) |
| 495 | 1 | ALLEN BRADLEY 1336 PLUS 2 AC ADJUSTABLE FREQUENCY MOTOR CONTROLLER |
| 496 | 1 | APPROX. 140' H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS STEEL TROUGH |
| 497 | 1 | EURODRIVE 5HP/44RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT 496 DRIVE) |
| 498 | 1 | LOT, (2) STEAM HEATER UNDER TRIMMER AREA |
| 499 | 1 | APPROX. 140' H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS S-DRIVE, STEEL TROUGH |
| 500 | 1 | CHIP DIVERTER PIPE |
| 501 | 1 | RADAR SIZE 25X30 CHIP FEEDER W/ INJECTOR PIPE, MOTOR, SHAFT MOUNT REDUCER |
| 502 | 1 | RADAR SIZE 20X20 CHIP FEEDER W/ INJECTOR PIPE |
| 503 | 1 | SKK 5HP/56RPM GEARHEAD MOTOR (LOT 502 DRIVE) |
| 504 | 1 | LOT, BLOW PIPE FROM LOT 501 & 502 FEEDERS TO 1ST PIPE CONNECTIONS OUTSIDE OF WIGWAY RAIL CAR LOADERS W/UPRIGHTS |
| 505 | 1 | 14' AUGER SCREW CONVEYOR W/MOTOR, SHAFT MOUNT REDUCER |
| 506 | 1 | 8' AUGER SCREW CONVEYOR W/MOTOR, SHAFT MOUNT REDUCER |
| 507 | 1 | RADAR SIZE 12X30, 3100 SERIES HIGH PRESSURE ROTARY LOBE BLOWER W/150HP DRIVE MOTOR, AIR INTAKE |
| 508 | 1 | LOT, (2) STEAM COIL HEATERS W/FANS |
| 509 | 1 | SURGE BIN W/3 AUGER CLEAN OUT, MOTOR & REDUCER, AIR CANON |
| 510 | 1 | SURGE BIN W/4 AUGER CLEAN OUT, MOTOR & REDUCER |
| 511 | 1 | 20X20 CHIP FEEDER W/INJECTOR PIPE |
| 512 | 1 | 7-1/2HP MOTOR W/EURODRIVE 33.47:1 RATIO REDUCER, ATTACHED ELECTRICS (LOT 511 DRIVE) |
| 513 | 1 | SUTORBILT SIZE 12X30 HIGH PRESSURE ROTARY LOBE BLOWER W/AIR INTAKE, SILENCER, DRIVE BELTS |
| 514 | 1 | WESTINGHOUSE 150HP/1180RPM BLOWER DRIVE MOTOR |
| 515 | 1 | LOT, DRIVE BELTS ON WALL |
| 516 | 1 | LOT, CHIPPER PARTS |
| 517 | 1 | RADAR CHIP MONITOR PANEL W/ATTACHED PUSH BUTTON PANEL, BELL |
| 518 | 1 | RADAR CHIP MONITOR PANEL |
| 519 | 1 | LOT, (2) PUSH BUTTON PANELS |
| 520 | 1 | LOT, TIERNEY 15 KVA 480 TO 120/240 VOLT SINGLE PHASE TRANSFORMER W/AB PUSH BUTTON PANEL, HORN |
| 521 | 1 | LOT, 48" INSERT TOOTH CIRCULAR SAWBLADES |
| 522 | 1 | LOT, SPLINED ARBOR CIRCULAR SAW BLADES |
| 523 | 1 | LOT, SPLINED ARBOR CIRCULAR SAW BLADES |
| 524 | 1 | NIELSEN #F500 CIRCULAR SAW GRINDER |
| 525 | 1 | ARMSTRONG #25 CIRCULAR SAW SHARPENER 14432 |
| 526 | 1 | WRIGHT W-350 SUPER HD DUAL SIDE TOOTH CIRCULAR SAW GRINDER F9325 |
| 527 | 1 | SYSTI-MATIC CIRCULAR SAW SIDE TOOTH GRINDER 35382-514 |
| 528 | 1 | WRIGHT W-150-HD-E CIRCULAR SAW GRINDER 19312 |
| 529 | 1 | ARMSTRONG 3-60C CIRCULAR SAW STRETCHER ROLL 10950 |
| 530 | 1 | 28" DIAMETER ANVIL |
| 531 | 1 | 18" DIAMETER ANVIL |
| 532 | 1 | ARMSTRONG #54C CIRCULAR SAW HAND SHARPENER |
| 533 | 1 | JET #16 DRILLING & MILLING MACHINE W/T SLOT TABLE, MAGNETIC CHUCK, SINGLE PHASE |
| 534 | 1 | THOMPSON H2C DUAL SIDE EDGER GUIDE MILLING MACHINE 667 |
| 535 | 1 | LOT, ASSORTED JIGS |
| 536 | 1 | LOT, BABBIT |
| 537 | 1 | LOT, ASSORTED KNIVES |
| 538 | 1 | ENCO BABBIT MILLING MACHINE |
| 539 | 1 | MILLING MACHINE |
| 540 | 1 | BABBIT POT W/LADLES |
| 541 | 1 | LOT, SCHURMAN SAW GUIDES |
| 542 | 1 | BELL CIRCULAR SAW DUAL SIDE TOOTH GRINDER |
| 543 | 1 | LOT, LARGE SPLINED ARBOR CIRCULAR SAW BLADES W/RACK |
| 544 | 1 | LOT, SMALL SPLINED ARBOR CIRCULAR SAW BLADES |
| 545 | 1 | LOT, EDGER PARTS |
| 546 | 1 | LOT, BENT KNIVES |
| 547 | 1 | LOT, SAW COLLARS |
| 548 | 1 | LOT, TREE MARKING PAINT |
| 549 | 1 | LOT, ASSORTED GRINDING WHEELS |
| 550 | 1 | LOT, CHAIN SAW BARS |
| 551 | 1 | LOT, KEYED ARBOR EDGER SAW BLADES |
| 552 | 1 | LOT, SPLINED ARBOR EDGER SAW BLADES |
| 553 | 1 | LOT, CARBIDE TIP TRIM SAW BLADES |
| 554 | 1 | LOT, ASSORTED SAW BLADES |
| 555 | 1 | LOT, SAW BLADE INSERT TEETH |
| 556 | 1 | LOT, 4-1/2"X.160"X1" DIAMOND GRINDING WHEELS |
| 557 | 1 | 6" DIAMOND GRINDING WHEEL |
| 558 | 1 | CIRCULAR SAW SET UP STAND |
| 559 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES (REMAINING CONTENTS OF (2) FILING ROOMS NOT ALREADY SOLD |
| 560 | 1 | 2HP BLOWER W/ATTACHED ELECTRICS, BLOWPIPE (OUTSIDE) |
| 561 | 1 | APPROX. 65'-H110 DRAG CHAIN CONVEYOR W/H&T SPROCKETS, STEEL TROUGH, CATWALK |
| 562 | 1 | RELIANCE 7-1/2HP MOTOR W/DODGE 31.4:1 RATIO REDUCER, DRIVE CHAIN (LOT 561 DRIVE) |
| 563 | 1 | LOT, (4) ASSORTED CYCLONES ABOVE SURGE BINS |
| 564 | 1 | APPROX. 145'-H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS STEEL TROUGH |
| 565 | 1 | 10HP MOTOR W/14:1 RATIO REDUCER, DRIVE CHAIN (LOT 564 DRIVE) |
| 566 | 1 | STEAM COIL HEATER W/ATTACHED FAN |
| 567 | 1 | LOT, 4X4 LUMBER |
| 568 | 1 | SUPER START 300HP SOLID STATE REDUCED VOLTAGE STARTER |
| 569 | 1 | ALLEN BRADLEY 9-SECTION 26 STATION MOTOR CONTROL CENTER |
| 570 | 1 | ITE FC20 1000 AMP SWITCHBOARD W/3 ASSORTED BREAKERS |
| 571 | 1 | ALLEN BRADLEY 3-SECTION 13 STATION MOTOR CONTROL CENTER |
| 572 | 1 | ALLEN BRADLEY 4 SECTION 17 STATION MOTOR CONTROL CENTER |
| 573 | 1 | ALLEN BRADLEY 1-SECTION MCC W/2 SIZE 5 STARTERS |
| 574 | 1 | ABB AGS500 ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER |
| 575 | 1 | TIERNEY 15 KVA 480 TO 120/240 VOLT SINGLE PHASE TRANSFORMER W/ BREAKER PANEL |
| 576 | 1 | SKK NO DATA GEARHEAD MOTOR W/DRIVE CHAIN (OVERHEAD LANDING TABLE DRIVE) |
| 577 | 1 | BUSH CHIPMASTER SIZE 60A8K 60"-8 KNIFE HORIZONTAL FEED, BOTTOM DISCHARGE CHIPPER W/ WESTINGHOUSE 200HP DRIVE MOTOR, ROOF 740802 |
| 578 | 1 | VIBRA-PRO 30'X24" BOTTOM VIBRATORY CONVEYOR W/DRIVE MOTOR |
| 579 | 1 | LOT, STRUCTURAL STEEL UNDER LOTS 577 & 578 |
| 582 | 1 | LOT, POWER INSTALLED CONDUIT & WIRE IN SAWMILL, BOILER AREA ONLY: NO HIGH VOLTAGE OVER- HEAD WIRE-NO INTERNAL WIRE ON ANY MACHINERY OR ELECTRIC BOXES, WIRE DISCONNECTS AT IN & OUTFEED LUGS ON SWITCH GEAR, LUGS STAY WITH SWITCH GEAR, NO COMPUTER ON CONTROL WIRE, IE: WIRE FROM SCANNER TO SCANNER ELECTRICS |
| 583 | 1 | 55'-H102 DRAG CHAIN LOG HAUL CONVEYOR W/HEAD SPROCKETS, S- DRIVE, STEEL TROUGH G.E. PACIFIC GEARHEAD, SUPPORTS TO GROUND (NO TAIL SPROCKET) |
| 584 | 1 | G.E. 10HP/1450RPM MOTOR W/REDUCER |
| 585 | 1 | LOT, STEEL SCRAP |
