James G. Murphy Co.











Auction Schedule Company Overview Advance Bid
STONE FOREST INDUSTRIES

October 15
10AM
Highway 96, Happy Camp, CA
Preview 10-4, Wednesday October 14

Past Auction - held in 1997/98

DEBARKER
  • SALEM 60" 5-arm ring debarker w/NICHOLSON frame, 100 hp DC ring drive, 50 hp DC feed drive, 125 hp gen set, 50 hp gen set, 25 hp hydraulic unit

BANDMILLS
  • KLAMATH 7' RH bandmill, mechanical strain, booth & controls
  • KLAMATH 6' LH bandmill, mechanical strain, booth & controls
  • KLAMATH 7' bandmill

RESAW
  • KLAMATH 5' resaw, Temposonic positioned linebar, powered feed rolls, in/out rolls, booth & controls
  • AMERICAN 111 54" resaw

CARRIAGES
  • FILER & STOWELL 42" 4-knee Temposonic positioned log carriage, OPCON 2000 scanner w/(32) eyes, OPCON controls, air dogs, (4) trucks, pantograph, rails, bumpers, booth & controls
  • FILER & STOWELL 52" 3-knee Temposonic positioned log carriage, air dogs, (5) trucks, pantograph, rails, bumpers, booth & controls

CARRIAGE DRIVES
  • RELIANCE 600 hp SCR controlled carriage drive, INDUSTRIAL electric controls, (2) 400 kva transformers
  • INDUSTRIAL ELECTRIC 450 hp DC carriage drive

EDGERS
  • SCHURMAN 10"x84" combination edger, keyed arbor, (5)shifting saws, 500 hp arbor drive, oil mist system, hydraulic unit, lasers, split feed rolls, outfeed w/edge picker, controls
  • SCHURMAN 6"x72" splined arbor edger, (4) shifting saws, 500 hp arbor drive,
  • UKIAH saw glide system, hydraulic unit, lasers, in & outfeed rollcases, controls

TRIMMERS
  • IRVINGTON trimmer, trim 32', pass 36', line shaft driven, 2-secton pass thru transfer w/INDUSTRIAL electric controls
  • PRESCOTT trimmer, trim 24', pass 34', line shaft driven, 2-section pass thru transfer, GOULD Micro 84, controls

CHIPPERS & CHIP SCREENS
  • SUMNER 72" chipper, horizontal infeed, bottom discharge, 200 hp drive
  • CM&E 48" chipper, drop feed, bottom discharge, 250 hp drive
  • BC/SUMNER 6'x12' 3-deck chip screen
  • SODERHAMN 6'x6' 3-deck chip screen
  • WSM 80HD 8'x10' 3-deck chip screen, s/n: 1431287

HOGS
  • JEFFREY 45WB hog, 200 hp drive
  • WEST SALEM 4032B hog, 250 hp drive, s/n: 2628

BLOWERS, FEEDERS
  • SUTORBILT 1024-5111 high pressure blower, 10"x24" capacity, 100 hp drive, silencer
  • RADER 20"x25" feeder w/drive

CUTOFF SAWS
  • 7' chain cutoff saw, 15 hp drive, cradle
  • 7' portable chain cutoff saw, 15 hp drive

COMPRESSORS, DRYERS, RECEIVERS
  • 1983, '84 QUINCY 1251B rotary screw compressors, 250 hp, 22,000 & 65,000 hrs, s/n's: 830464, 840634
  • 1984 QUINCY 240B1 rotary screw compressor, 50 hp, s/n: 8450587
  • SULLAIR 25-300L rotary screw compressor, 300 hp, s/n: 86415
  • JOY Twistair 1240 rotary screw compressor, 250 hp, 110 psig, s/n: 23766-88
  • New AMP 10 hp tank mounted compressor, 36 cfm @ 100 psi
  • DRI-AIRE DA600 air dryer, s/n: 2043-121487
  • Assortment of air receivers

CHIP BINS, CYCLONE, BLOWPIPE
  • (3) 30-unit chip bins
  • 20-unit chip bin
  • (3) 14-unit chip bins
  • 10' dia long neck cyclone
  • 8' dia long neck cyclone
  • Assortment high & low pressure blowpipe

PLANER
  • STETSON ROSS 6-12MA1 8"x24" planer w/profiles, (12) knives, (4) heads, (2) profiles, 80 hp top head, 40 hp bottom head, 20 & 25 hp side heads, 40 hp top profile, 20 hp bottom profile, 75 hp DC generator set, 50 hp DC feed drive, 10 hp hydraulic unit, planer bridge, pineapple feed table, new bed plate, spare heads, parts

STICKER STACKER
  • 25' 11-pocket sticker stacker, 5-arm lowering hoist, 24" 6-strand H78 infeed transfer, 30' 4-strand outfeed transfer w/even ending rolls 60'x60"x9" infeed rollcase 4-arm mechanical breakdown hoist 10' 5-strand H78 transfer 12' 4-strand lumber unscrambler, controls & electrics

BANDING STATION
  • Banding station w/top, side, & end squeeze, 32'x60"x9" infeed & outfeed rollcases, controls & electrics

KILNS
  • (3) 32'x102' double track steam fired cinderblock kilns, aluminum tops & doors, fans, electrics, controls
  • (2) 16'x102' single track steam fired cinderblock kilns, aluminum tops & doors, fans, electrics, controls
  • 5000'+/- kiln rail
  • (200+/-) kiln carts

BOILER PACKAGE, SILOS
  • KEWANEE Type C wood fuel/steam fired boiler, 20,000 PPH, 15 lb pressure, 2500 s.f. heating surface, s/n: 9637
  • WELLONS fuel box, blowers, infeed fuel conveyors, C&H 3-section MCC, controls, electrics, piping
  • (2) metal fuel silos

FIRE SYSTEM
  • CUMMINS diesel powered fire system w/pumps, piping, electrics, controls

FILING ROOM
  • ARMSTRONG #6 band saw sharpener w/stands
  • (2)ARMSTRONG #4 band saw sharpeners w/stands
  • WRIGHT W350 auto dual side grinder
  • WRIGHT W150HD carbide grinder
  • NIELSEN F500 carbide grinder
  • ARMSTRONG #16 circular saw sharpener
  • ARMSTRONG 3-10C circular saw stretcher
  • IMW edger guide mill
  • hoe guide block mill
  • NIELSEN chain sharpener
  • BARNHARDT grinder
  • anvils
  • welder
  • babbit pot
  • band saw blades
  • edger blades
  • trimmer blades
  • cutoff bars & chains

PLANER GRINDING ROOM
  • NEWMAN G280 tub grinder, s/n: 280-341
  • STETSON ROSS 382 grinder
  • CHROMALOX babbit pot
  • grinder
  • knife steel

MILL ELECTRICS
  • GE 3000 amp main mill disconnect
  • GE 2000 amp main mill disconnect
  • GE 8000 line 6-section MCC w/(30)switches
  • GE 8000 line 3-section MCC w/(11)switches
  • GE 8000 line 2-section MCC w/(10)switches
  • GE 8000 line 2-section MCC w/(6) switches
  • (2) GE 8000 line 1-section MCC w/(4) switches
  • ALLEN BRADLEY 4-section MCC w/size 5 starter, (15) switches
  • ALLEN BRADLEY 2-section MCC w/(6) switches
  • WESTINGHOUSE 2-section MCC w/size 6 starter, (4) switches
  • WESTINGHOUSE 2-section MCC w/(12) switches
  • ALLEN BRADLEY size 5 reduced voltage starter
  • TOSHIBA 200 hp reduced voltage starter
  • assorted disconnects to 1200 amp
  • WAGNER 682 moisture meter
  • (2) SAFTRONICS 13.7 kva adjustable frequency drives
  • SAFTRONICS 10.3 kva adjustable frequency drive
  • ALLEN BRADLEY SLC 150, 1989 SAFTRONICS 13.7 kva, controls

HOISTS
  • (2) 4-arm mechanical breakdown hoists, drive
  • MOORE 4-arm lowering hoist/stacker, drive

TRANSFERS
  • 30' 5-strand H124 infeed log transfer, S-drive, pin stops, drive
  • 30' 5-strand H124 log transfer, 5-arm log stop & loader, drive
  • 7' 6-strand H124 log transfer, pin stops, drive
  • 10' 6-strand H124 log transfer, lugs, log drop out gate, drive
  • 40' 6-strand H124 log transfer, 6-arm log stop & loader, drive
  • 10' 7-strand H78 transfer, pin stops, drive
  • 36' 6-strand H138 transfer, drive
  • 50' 8-strand H138 transfer, drive
  • 20' 5-strand H78 transfer, drive
  • 4' 5-strand H78 trasnfer, drive
  • 40' 5-strand H78 transfer, drive
  • 16' 6-strand H78 transfer, drive
  • 65' 5-strand H124 transfer, drive
  • 24' 5-strand H124 transfer, drive
  • 18' 8-strand H78 floor transfer, drive
  • 10' 7-strand H78 decline transfer, drive
  • 10' 6-strand H138 transfer, drive
  • 4' 6-strand H78 transfer, drive
  • 5' 10-strand H78 transfer lumber unscrambler
  • 12' 11-strand H138 transfer, drive
  • 40' 9-strand H78 transfer, drive
  • 10' 5-strand H78 transfer, drive
  • (2) 90' 5-strand 4" rolltop green chain transfers, drive
  • 15' 5-strand 4" rolltop green chain transfer
  • 45' 5-strand 4" rolltop green chain transfer, drive
  • 40' 7-strand H78 transfer, drive
  • 8' 6-strand H78 transfer, drive
  • 10' 5-strand H78 transfer, drive
  • 16' 4-strand H78 transfer, drive
  • 42' 6-strand H78 transfer, drive
  • 42' 6-strand H138 transfer, drive
  • 10' 7-strand H138 lumber landing table, drive
  • 100' 5-strand green chain transfer, drive
  • 42' 5-strand H78 transfer, drive
  • (2) 24' 3-strand H78 transfers, drives
  • 16' 3-strand H78 transfer, drive
  • 10' 7-strand H78 transfer, drive
  • 32' 8-strand H78 transfer, drive
  • 12' 8-strand H138 transfer, drive
  • 14' 4-strand H78 transfer
  • 20' 6-strand H138 transfer, drive
  • 10' 5-strand H138 transfer, drive
  • 10' 6-strand H138 transfer, drive

CHAIN, BELT, VIBRATORY CONVEYORS
  • 50' H112 conveyor, log stops, drive
  • 50' H112 conveyor, 5-arm log kicker, drive
  • 40' H112 conveyor, log kicker, drive
  • 45' H112 conveyor, 5-arm log kicker, pin stops, drive
  • 45' H112 conveyor, drive
  • 78' H132 conveyor, cradles, 6-arm log kicker, drive
  • 150 H112 conveyor, drive
  • (2) 40' H110 conveyors, drives
  • 96' H78 conveyor, drive
  • 45' H110 conveyor, drive
  • 35' H110 conveyor, drive
  • 145' H110 conveyor, drive
  • 145' H110 conveyor, drive
  • 50' 2-strand H110 conveyor, drive
  • 90' H112 conveyor, drive
  • 135' long link conveyor, drive
  • 80' H110 conveyor, drive
  • 60' H112 conveyor, drive
  • 24"x100' belt conveyor, drive
  • (2) 24"x66' belt conveyors, drives, (2) 24"x40' belt conveyors, drives
  • 24"x36' belt conveyor, drive
  • 24"x14' belt conveyor, drive
  • 24"x12' belt conveyor, drive
  • 24"x3' slow down belt conveyor, Vari-speed drive
  • 30"x40' belt conveyor, drive
  • (2) 30"x36' belt conveyors, drives
  • 30"x22' belt conveyor, drive
  • 8"x42' belt conveyor, drive
  • 72"x22' belt conveyor, drive
  • 30"x30' vibratory conveyor, drive
  • (2) RENS metal detectors

ROLLCASES
  • 36"x115"rollcase, drive
  • 50"x75' rollcase, drive30"x60' rollcase, drive
  • 36"x54' rollcase, drive
  • 60"x39' rollcase, drive
  • (2) 60"x32' rollcases, drives
  • 30"x30' rollcase, drive
  • 72"x18' rollcase, drive

SHOP EQUIPMENT & MISCELLANEOUS
  • CADILLAC 12"x96", LODGE & SHIPLEY 12"x48" engine lathes, 3-jaw chuck, tool post, tail stock
  • BROWN & SHARPE #3 vertical milling machine, 18"x60" table
  • (2) JOHNSON horizontal band saws
  • WALKER TURNER 20" drill press
  • RIDGID 535 threader
  • DEWALT 14" radial arm saw
  • ACCO 8-ton shop press
  • MILLER Mk8 1600 amp welder
  • Idealarc R312-400 DC welder
  • (2) MILLER SRH 333 DC welders
  • AIRCO 300 amp DC welder
  • HOBART welder/generator
  • steam cleaner
  • double end grinders
  • hoists to 1 ton
  • tooling
  • SWEED scrap chopper
  • 60" blower, 100 hp drive
  • WFP 40 hp hydraulic unit
  • (2) hydraulic operated timber toters
  • FAIRBANKS MORSE 10'x70' balance beam type truck scales, 130,000 lb capacity
  • 20,000 gal, (2) 1000 gal fuel tanks
  • mill wiring
  • conduit, fittings
  • GRACO pump station
  • sticker bunks
  • mill intercom sytem
  • cylinders
  • chain, sprockets
  • shafting
  • pipe fittings
  • nuts, bolts
  • motors
  • reducers
  • air & hydraulic hose
  • welding rod
  • (3)SIGNODE pneumatic banders
  • SIGNODE bander
  • trailer loader w/COFFING 5 ton hoist, GE electrics
  • MANLEY 50 ton arbor press
  • (2) 30 hp hydraulic units
  • yard lights
  • hoppers
  • much more

BUILDINGS
  • (2) 80'x120' all steel clear span buildings
  • 100'x200' wood framed metal clad clear span building
  • 17'x200' all steel clear span building

OFFICE EQUIPMENT
  • Large selection of office furniture & equipment including (10) desks, (30) chairs, 3'x9' redwood conference table, (20) lateral & vertical file cabinets, (2) computers, MITA DC4055, XEROX 7024 copiers, office supplies & more

ROLLING STOCK
  • CAT 988B log loader, new lifetime CAT 3408, less than 1000 hrs, rebuilt torque converter, log forks, s/n: 50W2032
  • CAT 980B log loader, CAT 3306, log forks, s/n: 89P4827
  • 1989 LIEBHERR R952-HD track log loader, new CUMMINS diesel, YOUNG boom & grapple, high walker, triple bar pad, 36" tracks, s/n: 214-222
  • CAT D7E crawler tractor, power shift trans, D7H winch, straight blade, tilt, direct electric start, s/n: 48A10886
  • HYSTER H200H 20,000 lb pneumatic forklift, PERKINS diesel, s/n: C007DO2530G
  • HYSTER H200HS 20,000 lb pneumatic forklift, PERKINS diesel, s/n: C007D1789A
  • (2) HYSTER H180 18,000 lb pneumatic forklifts, PERKINS diesel (1 parts)
  • HYSTER H150 15,000 lb pneumatic forklift, gas
  • HYSTER H80C 8000 lb pneumatic forklift, propane
  • HYSTER 300H straddle buggy, PERKINS diesel, s/n: D12P1986A, 3670 hrs
  • MASSEY FERGUSON 300 loader backhoe, diesel, s/n: 1196004039
  • PETERBILT 359A dump truck, CUMMINS 335 diesl, 5/4 trans
  • PETERBILT water truck, CUMMINS 335 diesel, 5/4 trans
  • KENWORTH 923 tractor, CUMMINS 335 diesel
  • DODGE M500 utility truck, V8, 4 spd, w/utility bucket

TERMS & CONDITIONS
  • Full payment must be made by no later than 4 pm, Friday, October 16. A 25% deposit is required by the close of business, auction day. Cash, cashiers check, Master & Visa Cards only. Personal or Company checks accepted ONLY with bank letter of guarantee. Absentee bids accepted with 25% deposit
  • No purchase may be removed during the auction. All purchases must be removed 1 hour after the sale or between 8 am & 4:30 pm Friday & Monday, October 16 & 19 for small items. Large equipment removal schedule announced on auction day.

  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.

  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.

  • Washington Auctioneers License #48

AIRLINES & RENTAL CARS
    Jackson County Airport, located in Medford, OR is approximately 102 miles from the auction site and is served by Horizon Airlines, United Express, and most major rental car agencies.

LODGING

    (Limited room availability in Happy Camp. Please call office for room reservations)

    • MEDFORD HAPPY CAMP
    • Best Western 541-773-8266
    • Anglers Motel 530-493-2735
    • Knights Inn 800-626-1900
    • Forest Lodge 530-493-5424
    • Hojo Inn 541-772-6133
    • Klamath Inn 530-493-2860
    • Bear Cove 530-493-2677

DRIVER DIRECTIONS
    From north or southbound I-5, take the Hwy 96 exit. Drive westbound on Hwy 96 approximately 63 miles to Happy Camp.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions

Registration Form | Advanced Bid Overview | Terms & Conditions


Back to Top

James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide