|
10AM - TUESDAY - MARCH 26
Preview 10am to 4pm, Monday, March 25
780 W Hwy 108, Shelton, WA
NOTE: Auction starts 10am sharp with major equipment
Advance Bid Auction Catalog
Past Auction - held in 2002
|
|
SAWMILL EQUIPMENT
|
- MORBARK 640 log debarker, 100 hp, 12" debarking head, 20" hydraulic spiked log turning rolls, MORBARK 35' track chain log haul infeed, 40' H110 log haul outfeed, control booth, hydraulic drives, hydraulic support units, s/n: 247
- KLAMATH IRON WORKS 5' vertical twin sharp chain bandmill headrig, 100 hp, air strain linear positioning Digitron setworks, feed thru sharp chain, (2) 24"x28' slab take away belts, 8'x10' control booth, hydraulic support unit
- 1998 MCDONOUGH 54" linear positioning air strain vertical band resaw w/hydraulic press feed rolls, s/n: 54MA1493
- (2) LETSON BURPEE 5' linear positioning, air strain horizontal band resaws, 125 hp, slat chain feed thru transfer, pneumatic actuated, hydraulic driven press/feed rolls, 30"x20' infeed rollcases, 30"x10' outfeed rollcases, hydraulic support unit
- (3) 1995/1994 STENNER MHS9 36" horizontal band resaws(on fence line), 20 hp, mechanical setworks, gearhead driven press/feed rolls, feed thru 7" slat chain transfer, 12" height & width cap, s/n's: 10095, 9895, 9865
- PRODUCTO SAW SYSTEMS 91RRR circular saw splitter/resaw, 8" cap, 100 hp arbor, hydraulic feed rolls, in & outfeed belt conveyors, s/n: 5010393
- LETSON BURPEE 5' vertical resaw(dismantled)
- 1999 optimized board edger line w/1999 PRO MAC GME 2-3/8"x32" splined arbor edger, (4) linear positioning saws, 75 hp, saw guide & arbor lube systems, 20' edger centerline infeed chain transfer system, hold downs, (6) linear positioning board alignment arms, 15' 3-section chain infeed table, DYNAMIC CONTROL SYSTEMS M24-14-24, DANAVISION II laser scanning system, 20' capacity, shifting belt edger outfeed, manual & remote control stations, ALLEN BRADLEY PLC controlled, ALLEN BRADLEY 3-section MCC w/adjustable frequency, electrics, hydraulic support units
- SCHURMAN(modified) 8"x48" splined bottom arbor gang edger, 300 hp, 30 hp feed roll drive, clamshell & swing away openings, slat chain feed table
- SCHURMAN(modified) 2"x48" splined bottom arbor pocket board edger, 50 hp, split roll infeed, plastic slat chain outfeed, lasers, (13) saws, (7) pockets
- 1994 WAITE 2"x48" keyed top arbor edger, 25 hp
- CON-VEY Keystone 12' air lift, line shaft trimmer, 25 hp, 0 saw, feed thru 81X lugged chain transfer
- VALLEY STYLE double end trimmer line w/lug loader, (2) end evening rollcases, (2) 15 hp end defect circular saws, 30', 12-strand lugged 81X feed thru transfer, hydraulic drive, hydraulic support unit
- HEMCO 16' capacity, 16-bay bolt together sling type lumber sorter w/unscrambler infeed(dismantled)
- LSI 16' hand placement sticker stacker system(dismantled)
|
|
MILL SUPPORT EQUIPMENT
|
- (21) 20' capacity lumber stacking rollcases
- (2) ARMSTRONG #4RH bandsaw sharpeners w/clamps, s/n's: 14157, 12577
- 1992 BEACON Twinner II bandsaw tipper
- Assortment of hydraulic support units, stand alone electrics
|
|
LOG DECKS, TRANSFERS, CONVEYORS, LANDING TABLES, ROLLCASES
|
- LOG DECKS: 28' 5-strand H82 S drive log deck w/16' log stop & loader, FALK
- 20' 5-strand H78 deck, SKK
- 11' 6-strand H78 deck w/log stop & loader, SKK
- CHAIN TRANSFERS: 14' 4-strand H78 w/SKK 2/20
- 12' 10-strand H78 w/SKK 5/45
- 16' 12-strand H78 w/SKK 7.5/45
- 28' 7-strand H78 w/SKK 7.5/45
- 50' 8-strand H78 w/SKK 7.5/30
- 60' 7-strand H78 w/DAVID BROWN 20:1
- 14' 8-strand H78 w/diverter gate, SKK 2/56
- 14' 6-strand H78
- 25' 8-strand H78
- 14' 5-strand H78 w/SKK
- 45' 5-strand H78 rooftop
- 11' 7-strand H78 w/DAVID BROWN GH
- 16' 7-strand H78 w/SKK
- 22' 1-strand H78 w/SKK
- 16' 10-strand H78 w/SKK 5/56
- 30' 8-strand H78 rooftop
- BELT CONVEYORS: 24"x60' log haul belt w/kickers, SKK
- 24"x32'
- 12"x28'
- 12"x80' w/SKK
- (2) 24"x60' w/SKK
- 28"x60' w/SKK 5/84
- (2) 24"x18' hydraulic
- (2) 24"x22' cleated w/SKK 5/45
- 36"x32' w/SKK
- 14"x35'
- 12"x12' w/SKK 2/56
- 30"x50' w/DAVID BROWN GH
- 24"x20'
- 24"x26'
- 24"x11'
- LANDING TABLES: (2) 5' 7-strand H78 rooftop
- 10' 5-strand H78 rooftop
- 9' 8-strand H78 rooftop
- 4' 5-strand H78 rooftop
- 16' 5-strand H78 rooftop
- 6' 5-strand H78 rooftop
- 22' 6-strand plastic H78 rooftop
- 22' 5-strand H138 camelback
- 16' 9-strand plastic H78 rooftop
- ROLLCASES: 30' w/(19) 8-1/2"x48" rolls
- 20' w/(12) 8-1/2"x60" rolls
- 30' w/(15) 8/1/2"x30" rolls
- UNSCRAMBLER: 7'x20' 14-strand H78 w/hydraulic drive
- VIBRATORY CONVEYOR: 16"x35' w/fine dropout, drive
|
|
ROLLING STOCK
|
- JOHN DEERE 450C crawler dozer, 65 hp JD diesel, 4 spd, HiLo trans, 52' gauge, 5-roller track frame, ROPS, s/n: 278385T
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT: Full payment must be made by no later than 4pm, Wednesday, March 27.
- A 25% deposit is required by the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on aucction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
- From north or southbound I-5, take the Hwy 101 exit(#104).
- Drive north on Hwy 101 approximately 14 miles to the Hwy 108/McCleary exit.
- Drive west on Hwy 108 approximately 7/10 mile to the auction site, located on the right.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
|
LODGING
|
| SUPER 8 MOTEL, SHELTON(6 mi N of auction site) | | 1 800-800-8000 |
| BEST WESTERN INN, OLYMPIA | | 360-956-1235 |
| COMFORT INN, OLYMPIA | | 360-352-0202 |
| RAMADA INN, OLYMPIA | | 360-352-7700 |
|
Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions
Registration Form | Advanced Bid Overview | Terms & Conditions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|
