|
10AM - TUESDAY - JULY 15
Preview 8-4, Monday, July 14
3327 Frontage Rd, Three Forks, MT
Display Catalog
Downloadable PDF Catalog
Advance Bid Center
|
|
SAWMILL
|
- FOREST-ALL #MM 38 packaged headrig w/3-knee hydraulic carriage, TEMPOSONIC setworks, (2) end taper blocks, rail, carriage drive, 20" vertical hydraulic edger, TEMPOSONIC set, 50"/36", 50" bottom, 36" top head saw, 36" max log capacity, infeed, (2) outfeed transfer hydraulic units, 2000 JOHN DEERE 200 hp diesel drive, controls, spare JOHN DEERE drive, booth, spare blades & parts, s/n: CL-203
|
|
RESAWS
|
- FORESTER 900 36" vertical resaw w/hydraulic feed, infeed & outfeed rollcase, transfers, controls, electrics, s/n: 662
- MCDONOUGH 46" resaw, air strain, 50 hp hydraulic line bar, hydraulic feed rolls, infeed & outfeed, (2) hydraulic units, skate conveyor & transfers
|
|
MOULDER, PLANERS
|
- 2000 YATES AMERICAN 4-head, 6-knife 12" moulder, 10 hp side head, 15 hp top heads, 33/42-1/2 hp drive slat bed feed, w/4-strand x 24' outfeed transfer, landing table, s/n: 21557
- WOODS 415M2 4-head, 12-knife, 15" planer, 100 top, 75 bottom & side, 25 hp infeed drive mounted on T/A trailer w/15 hp pineapple feed, infeed, belt conveyor, mechanical breakdown hoist, 12"x30' belt conveyor, hydraulic units
- WOODS 407M 6-head, 12-knife, 15" top/bottom profile planer
|
|
TRIMMER
|
- MOORE OREGON 20' pass, 16', individual saw trimmer w/lug transfer, 4-strand rooftop transfer & 3-strand x100' outfeed transfer, 3'x80' belt conveyor, clean out conveyor, electrics
|
|
STICKER STACKER
|
- 20' sticker stacker system w/hydraulic breakdown hoist, 3-strand x30' transfer, singulator, 12'x40" stick restack belt, stick restacker, 12-strand x12' transfer, tipple, (3) lumber stops, foot controls, (2) even end rolls, (2) 12"x24' belt transfer conveyors, 5-arm sticker stacker, 6-arm hoist, 40' outfeed roll conveyors, electrics, laser, hydraulics, catwalks
- Large assortment of 36"-48" kiln sticks
- Hand stack system w/platform, infeed & outfeed transfers
|
|
WRAPPING STATION
|
- Wrapping station w/set up frames, material rolls, manual banders
|
|
CHIPPERS, CHIP BINS
|
- MORBARK 583 54", 3-knife chipper, 150 hp, s/n: W237
- PRECISION 3809 38", 4-knife, chipper, 150 hp, 1,100 rpm, s/n: C1012
- 24"x20' belt conveyor
- (2) PEERLESS 40-unit chip bins w/hydraulic gates, hydraulic unit
- 12"x50' auger feed conveyor
|
|
SAWDUST BAGGER
|
- PREMIER TECH EX-600R sawdust bagger w/PREMIER EM-600R hydraulic unit, EM-600R controls, 12"x30' auger feed, 16" box chain x 30' incline hydraulic feed conveyor unit, surge bin, s/n's: 1EM-9612F, 1EM-9612C
|
|
KILN EQUIPMENT
|
- (4) SURE FLAME S150S 1,500,000 btu natural/propane heaters
- (8) AMERICAN AIR FILTER 20 hp circulating fans
- (3) Kiln recirculating fans
|
|
ELECTRICS
|
- ALLEN BRADLEY centerline 2-section MCC
- ALLEN BRADLEY 400 hp soft start
- Large selection of spare starters & disconnects
|
|
FILING & GRINDING ROOM EQUIPMENT
|
- ARMSTRONG circle saw sharpener
- ARMSTRONG #2 right hand grinder w/clamp
- JOCKEY 97H grinder
- YATES AMERICAN side head grinder, s/n: 29928
- HANCHETT 40" traveling bed knife grinder, s/n: 073
- ARMSTRONG #4 stretcher rolls, s/n: 12426
- ARMSTRONG #4 right hand band sharpener
- Assortment of set up stands, knives, chipper, heads
|
|
SHOP EQUIPMENT, TOOLS, PARTS
|
- QUINCY 5 hp single stage horizontal air compressor
- MAGNUM 5 hp 2-stage vertical air compressor
- INGERSOLL RAND 5 hp vertical air compressor
- RIDGID 300 pipe machine
- HONDA pressure washer
- (2) SANBORN 5 hp vertical air compressors
- Double end pedestal grinder
- ASTRO 16 speed drill press
- CAROLINA 60,000 lb shop press
- 500 lb cap. cherry picker
- MILLER 375 extreme plasma cutter
- CAROLINA horizontal bandsaw
- MILLER 250 twin 200 amp welder
- Oxy/acetylene outfit
- (3) 2008-2007 STRA PAK JK-12 plastic banders
- SWEDE 505 band chopper
- Assortment of shop equipment & tools, hydraulic pumps, electrics, hose, bearings, fasteners, belts, hydraulic ramp, spare parts, cable, nuts, bolts, drives - new & used, starters, disconnects, soft starts, gears, chain, sprockets
|
|
ROLLING STOCK
|
- CAT 966C log loader, s/n: 57H192
- CAT 950 log loader, s/n: 81J8029
- CAT 950 loader w/forklift attachment, s/n: 58H269
- CAT 936F loader w/fork attachment, 22,000 lb cap., s/n: 8AJ00557
- CAT 930 loader w/forklift attachment, s/n's: 41K3680, 41K8571
- CAT 926 loader w/forklift attachment, s/n: 94Z00882
- ALLIS CHALMERS 940 loader w/fork attachments, s/n: 9401468
- ALLIS CHALMERS TL545 loader w/FORD 300 6 cyl propane, gas, s/n: 1551
- PRENTICE F210D trailer mounted log loader w/outrigger, PRENTICE log grapple, 75 hp hydraulic, s/n: 210P50127
- CAT 12 grader, s/n: 8T3161
- 1984 MASTER CRAFT IT-810-0 Type G 8,000 lb pneumatic forklift, gas, 3 stage, s/n: Y1013
- 1997 GMC 4X4 extended cab 1/2-ton pickup
- 1980 DODGE Power Wagon 400 pumper truck, 4X4, gas, duals
- 1978 CHEV Custom Deluxe 20 3/4-ton service truck w/MILLER 200 gas welder
- 1971 FORD F100 service truck w/MILLER AEAD-200 gas welder
- 1969 MACK RL763L T/A approx. 2,500 gallon water truck, DETROIT diesel, 9 spd
- 2002 DRESSEN T/A 6000 lb hydraulic dump trailer
- 40' insulated van box
- 1974 EMBASSY 14'x70' modular office/mobile home
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT: Full payment must be made by no later than the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #1960
|
|
DRIVER DIRECTIONS
|
- From east or westbound I-90, take the Three Forks/Trident/Hwy 10 exit (#278).
- Drive east on Frontage Road approximately 3.2 miles to the auction site, located on the left.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2008 James G. Murphy Co.
All rights reserved worldwide
|
|
|
