Click small pics to enlarge

Click HERE for more photos





CUSTOM SANDING & MILLING

10AM - TUESDAY - JULY 18
Preview 10am to 4pm, Monday, July 17
725 Columbia St, Brea, CA

Past Auction held in 2006

Display Catalog

Downloadable PDF Catalog

Advance Bid Center

SELECT RIPSAW
  • 1994 KIMWOOD 2090T82 select ripsaw, 2-1/4"x20" capacity, splined arbor, 20 position Temposonic setworks, (2) 20 hp preslab side heads, RELIANCE 100 hp/3555 rpm main arbor drive, EURODRIVE 10 hp variable speed feedworks drive on feed rolls, 16' powered infeed rollcase, (8) 2"x28" knurled rolls, 14' 3-section 4-strand infeed transfers, (8) LAHARCO lasers, TEMPOSONIC position rack, FAC 15 hp hydraulic unit, ALLEN BRADLEY 3-section 11-switch MCC, SIEMENS TI505 PLC, spare feed rolls, arbor motors, s/n: 6-6-10-94 (installed August 2002, used 20 hrs per month)

SURFACER - MOISTURE METER
  • 1996 YATES B-26 30" double rough surfacer, 5/8"- 4" thickness, 51" min feed, 50-200 fpm feed rate, 75 hp top, 50 hp bottom heads, 6-row spiral cutter heads, auto traversing grinder, thin stock control, heavy duty feed rolls, kickback, powered bottom feed rolls, motorized top head hoist, non marking outfeed rolls, air operated pressure bar release, automated bottom head traverse, digital readouts on 1st and 2nd bed plate, bottom infeed roll and top heads, 40 hp hydraulic drive, 30"x7' infeed belt transfer, standing operators console, starter panel, s/n: B29745 (bought new in 1996; never installed)
  • WAGNER 683 in line moisture detector, s/n: 683-231(new in box)

MOULDERS
  • 1994 WEINIG Unimat H22AL moulder, 4-3/4"x8-5/8" capacity, (6) heads, 10, 15 and 20 hp top and bottom heads, 10 hp side heads, 15 hp feed drive, 20-200 fpm, powered feed rolls, custom built 8" feed table and sound booth, s/n: 222-2073
  • DIEHL Accumold DL 405 moulder, 4-1/2²x8-5/8² capacity, (5) heads, 15 hp top, 10 hp bottom and 7-1/2 hp side heads, 5 hp powered feed rolls, 12² min stock length, 22-135 fpm, 6000 rpm, safety hood, s/n: 91M5550-4966
  • 1986 WEINIG Profimat P22N moulder, 4-11/16²x8-5/8² capacity, (4) heads, 15 hp top and 10 hp bottom and side heads, powered feed rolls, 7¹ infeed table, s/n: 226-310
  • (3) KIMWOOD/TRI-STATE T836 moulders, 3"x8" max capacity, (2) in place, (1) never used, bottom heads converted to 60 hp/3550 rpm belt drive, power top head, (2) 25 hp/3600 rpm arbor motors, in place jointer bars, EMPIRE 700 series lube system, ALLEN BRADLEY starters, SQUARE D 60 hp variable feed drive, (2) 30 hp variable feed drives on (2) installed machines, also available: (3) custom built pinch roll feeders w/2 hp DC motors and digital readout, s/n's: T836-5-12-89-2, -8-17-81-1, 6-30-85-3-42091 (not installed)

FINGERJOINTER
  • 1993 GRECON ERB fingerjointer, 8" thickness, 8" min - 32" max length, traveling feed table, 180 degree gravity roll turntable, single finger jointer head, glue station, outfeed and transfer belts, crowder roll, 10" payout table, swing arm controls, hydraulic unit, pre load rolls, s/n: 0959390193137

RESAW
  • KIMWOOD T-36-4 vertical band resaw, RELIANCE 30 hp/1700 rpm arbor drive, tilting dual 2 hp pinch feed rolls, RELIANCE variable speed drives, ALLEN BRADLEY size 3 starter, s/n: 132

RIPSAWS
  • DIEHL SL55 straight line ripsaw, 5" depth of cut, 36" throat, 15 hp/3600 rpm arbor, 2 hp feed chain, 55-100 fpm feed rate, 14"-16" saw, vertical pressure bar, stock guide, anti kickback pressure rolls, s/n: 86M-5003-4419
  • DIEHL SL52 straight line ripsaw, 5" depth of cut, 48" throat, 30 hp/3600 rpm arbor, 2 hp feed chain, 65-190 fpm, 250 fpm max, 14"-16" saw, feed speed control, vertical saw arbor adjustment, pressure bar, stock guide, anti kickback pressure rolls, s/n: 86M-5004-4420
  • EKSTROM CARLSON E straight line ripsaw, 5" depth of cut, 48" throat, 30 hp/3520 rpm arbor, 3 hp feed chain, 0-250 fpm feed rate pressure bar, vertical saw arbor adjustment, stock guide pressure rolls
  • AUBURN YIELD PRO re-ripsaw, (2) heads, 25 hp top and 10 hp side, 3" max thickness, 6" max width, 8" min length capacities, 50 fpm, 1-13/16" spindle, chip breaker, DRO for thickness, adjustable pressure on feed rolls, feed table w/variable speed and adjustable fence, approx 1000 hrs
  • KIMWOOD TRR-46 re-ripsaw, single bottom head, 2-1/2" max thickness, 8" min length capacities, approx 15 hp arbor drive, 1 hp feed roll drive w/adjustable pressure, feed table, variable speed and adjustable fence, approx 1000 hrs, s/n: TRR-46-10-31-97-77

SANDERS
  • CEMCO Hector TLF 53" 3-top head veneer sander w/cross belt platen, (2) contact rolls, floating finishing head, 6" height adjustment, air tracking, tension and variable speed on all drums, heads, belts, SCOTBRITE brush and belt cleaners, dual pump vacuum bed, s/n: 19064
  • (3) CEMCO 3000 series URRF-3338, 36" 3-top head sanders, (2) in place, (1) new, never used, (2) roughing drums, (1) finishing drum, air tracking and tension, converted to RELIANCE 30 hp/1765 rpm drives, variable speed motors available, variable speed feed thru belt, (3) ALLEN BRADLEY size 4 starters per machine, s/n: WBS-588
  • CEMCO UPR-50-HD 50" 2-top head planer sander w/spiral cut planer head, RELIANCE 60 hp/3535 rpm, finishing head, RELIANCE 60 hp/1765 rpm, (2) top rolls, feed thru conveyor, RELIANCE 5 hp/160 rpm, air tracking and tension, scissor lift outfeed table, s/n: CU-115
  • TANNEWITZ 36" 2-top head sander w/rough and finisher heads, LINCOLN 40 hp/1765 rpm, finishing brush
  • SHEBOYGAN 48" 3-top head drum sander, 15 hp/1750 rpm, variable speed controller, model 50 lubricator, s/n: 55-8-44
  • (2) TANNEWITZ SEZ4 66" 4-top head drum sanders, 10 hp/1750 rpm, s/n's: 1633, 1725
  • CEMCO 56" belt cleaning brush
  • (4) custom built dual side slat vertical belt sanders, 6" contact surface, (2) 3 hp/1725 rpm belt drives, 4' infeed hopper, (2) 1/2 hp power feeds, 1 hp vacuum motor, spare infeed hopper, (2) machines, (3) hoppers never used
  • CURTIN HEBERT 772, size 6, 3-head profile sander, w/profile stand, s/n: 77-1

CHOP SAWS
  • 1994 INDUSTRIAL C500R pneumatic right hand chop saw (never used)
  • 1994 INDUSTRIAL N510L pneumatic left hand chop saw (never used), w/in and outfeed gravity rolls and stops (new, in boxes)
  • 1994 WESTERN MACHINERY CS212LA mechanical left hand 12² chop saw, 7-1/2 hp, (new 1/5/94, never used), s/n: CS12301L, w/in and outfeed gravity rolls and stops (new, in boxes)
  • 1994 WESTERN MACHINERY CS208RA mechanical right hand 8² chop saw, 5 hp, (new 1/5/94, never used), s/n: CS89301R, w/in and outfeed gravity rolls and stops (new, in boxes)
  • (2) INDUSTRIAL C500R pneumatic right hand chop saws, 5 hp, in and outfeed gravity rolls w/stops, rejects belt drive, (2) spare reject belts, drive
  • NORTHFIELD 410 right hand pneumatic 4"x10" chop saw, 10 hp, in and outfeed rolls
  • WHIRLWIND 1000 right hand pneumatic chop saw w/in and outfeed gravity rolls, stops, reject belt, drive, s/n: 1997396R

BAGHOUSE SYSTEM
  • 1990 baghouse system w/PNEUMAFIL reverse air filter 13.5-448-8, 48,000 cfm @ 17.24" static pressure, 8' bags, 4164 sq ft surface area, 15 hp reverse air blower for cleaning, 3'x6' air inlet, 8'6" mechanical walk in section, 8' body section, 10'-3" hopper section, 4' inlet section, counter clockwise air inlet, explosion vents, sprinklers, magnahelic gauge, AE size 5 approx 72" fan, RELIANCE 200 hp/1785 rpm, AE size 14-12 blower, RELIANCE 20hp/1760 rpm, KOGER/air size 24 airlock feeder, approx 10'h x 11' w x 11-1/2', live bottom surge bin w/(3) 12' screws, shaft mounted reducer blowpipe
  • Large quantity of large and small diameter spiral ducting

GRINDING ROOM EQUIPMENT
  • 1993 WEINIG RONDAMAT 936 programmable profile grinder, steep edges to 85 degrees, radius bends to 90 degrees, 275 mm table stroke, 0-142 feed rate, infinitely variable, s/n: 936-272
  • 1994 WEINIG RONDAMAT 912 programmable straight knife grinder, 260 mm grinding length, tool diameter 80-280 mm, shaft angle 15 degrees, 600 rpm grinding spindle speed, 500 mm table stroke, s/n: 912-451
  • 1990 DIEHL DMG12 profile grinder, 1-13/16"x2-1/8" grinding arbors, X & Y tables, 12-1/2" length capacity, tool post, 90 degree rotation on table, s/n: 7/89M-5423-4839
  • WHIRLWIND 920 motorized arbor set up stand, s/n: 216935

MISCELLANEOUS MACHINERY
  • NORTHFIELD No 4 tilting table variety saw, 12² extended table, fences, mitres, 7-1/2 hp/3600 rpm, 48²x48² dove tail table (never used)
  • MARUNAKA ROYAL14FX 14² horizontal veneer slicer, 60 degree adjustable table, spare knives, s/n: 1922
  • FAY & EGAN 505 lightning sliding table, single end tenoner, rebuilt motors
  • QUINCY 350 tank mounted 10 hp compressor
  • DEWALT, COMET 16² swivel radial arm saws
  • DEWALT GR46 16² radial arm saw
  • CRESCENT 4² jointer
  • NEWTON B7 dual spindle borer
  • (3) HOLZHER triple roll power feeders
  • TEGLE & SONNER TSF-8 single end tenoner w/HOLZHER power feeder
  • SHANBACK & EBNER over arm router
  • (2) swing arm chop saws, (1) w/stand
  • IRVINGTON swivel base shop saw
  • (2) DAVIS & WELLS single spindle shapers
  • COMET single spindle horizontal boring machines
  • CENTAURO 24² vertical band resaw
  • (2) CTD 225 abrasive shop saws, 2 hp, in and out tables
  • custom built 3¹x10¹ hydraulic presses
  • 48² sandblast cabinet w/dust collector
  • FRANK 25 hp/30kw x 230 volt gen set
  • self dumping hoppers
  • 25 hp/3525 rpm, (2) 15 hp/3525 rpm BALDOR (new in boxes)
  • large quantity of spare motors
  • (50+) wood sorting carts
  • custom built sawhorses
  • rolling steel tables
  • large quantity of moulder and finger jointer heads (some new in box)
  • large quantity of assorted saws (many new in box)
  • sander belts
  • 20¹ 10-strand slat sorting transfer
  • much, much more!

ROLLING STOCK
  • HYSTER S100XL 10,000 lb HRT forklift, propane, fork positioners, 162-1/2" 3-stage clear view mast (311 hrs original), side shift, 42" forks, s/n: D004W09913S
  • CAT T125D 12,500 lb HRT forklift, propane, 217" 2-stage mast, side shift, 4' forks, s/n: 5MB004-4
  • HYSTER S80XLBCS 8000 lb HRT forklift, propane, 172" 3-stage clear view mast, side shift, 6' forks, 6700 hrs, s/n: D004V03107K
  • CAT T80C 8000 lb HRT forklift, propane, 145" 2-stage mast, 42" forks, 5680 hrs, s/n: Z94M01567
  • HYSTER S50XL 5000 lb HRT forklifty, propane, 189" 3-stage clear view mast, side shift, 42" forks, 5415 hrs, s/n: C187V07235P
  • HYSTER S30XL 3000 lb HRT forklift, propane, 174" 3-stage clear view mast, side shift, 42" forks, 3841 hrs, s/n: B010BD81E5H

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Wednesday, July 19.
  • A 25% deposit is required by the close of business, auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • CA Bond #445652C
  • Washington Auctioneers License #48

DRIVER DIRECTIONS
  • From north or southbound CA Hwy 57, take the Lambert Road exit (#10).
  • Drive west on Lambert approximately 2/10 mile to N State College Blvd.
  • Drive north on State College Blvd approximately 9/10 mile where it becomes W Central Avenue.
  • Continue west on Central approximately 7/10 mile to N Berry St.
  • Turn left and drive south on Berry approximately 1/10 mile to Columbia St.
  • Turn right and drive west on Columbia approximately 1/10 mile to the auction site.

  • Driver directions from Los Angeles International Airport, Orange County Airport, and Ontario Airport are available below

LODGING
    Embassy Suites - Brea 714-990-6000
    Heritage Inn - Fullerton714-447-9200
    Homestead Studio Suites Hotel - Brea714-528-2500
    Hyland Motel - Brea714-990-6867
    Woodfin Suite Hotel - Brea714-579-3200
DIRECTIONS FROM AREA AIRPORTS
  • From Los Angeles International Airport: Start going toward the Airport Exit on World Way S., take ramp onto Sepulveda Blvd S. toward I-105, take ramp onto I-105 East - go 17.1 mi, take the I-605 exit, take the I-5 exit toward Santa Ana, take the Pioneer Blvd exit toward Imperial Hwy, turn left on Imperial Hwy, turn left on Berry St., turn left on Columbia St to 725 Columbia St. Watch for auction signs. (Approximately 33 mi / 39 minutes)

  • From Orange County Airport: Start out going Northeast on Airport Way toward MacArthur Blvd, stay straight to go onto Michelson Dr., turn left onto MacArthur Blvd, ,merge onto I-405 N toward Long Beach, merge onto CA-55 N via exit 9A toward Riverside, merge onto I-5 N via exit 10B toward Los Angeles, merge onto CA-57 N via exit 107A toward Pomona, take the Lambert Rd exit - exit 10, turn left onto E Lambert Rd, turn right onto N State College Blvd, N State College Blvd becomes W Central Ave, turn left onto N Berry St, turn right onto Columbia St to 725 Columbia St. Watch for auction signs. (Approximately 22 mi / 26 minutes)

  • From Ontario International Airport: Start out going Northwest on North Way toward E Airport Dr, stay straight to go onto S Archibald Ave, turn slight left onto ramp, keep left at the fork in the ramp, merge onto I-10 W toward Los Angeles, merge onto CA-57 S toward Santa Ana, take the Lambert Rd exit - exit 10, turn right onto E Lambert Rd, turn right onto N State College Blvd, N State College Blvd becomes W Central Ave, turn left onto N Berry St, turn right onto Columbia St to 725 Columbia St. Watch for auction signs. (Approximately 26 mi / 30 minutes)

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2006 James G. Murphy Co.
All rights reserved worldwide