Click small pics to enlarge

Click HERE for more photos



PRISTINA PINE

9AM - TUESDAY & WEDNESDAY - APRIL 29th & 30th
Preview 10am - 4pm, Monday, April 28th
3014 N Flora Road, Spokane, WA

Display Catalogs: Day 1 | Day 2 | Day 2 X Lots

Downloadable PDF Catalog

Advance Bid Center

Fingerjointers
  • (2) 2006 WESTERN INDUSTRIAL SYSTEM fingerjointer lines, 5/8"-2" thickness, 1-1/2"-8" width capacities, short block, profile section w/(2) trim saws, (2) score heads, 7.5 hp, (2) cutter heads, 20 hp, crossover belt, even end, lug loader, 84"x16' walking floor bin, dump bin feed, 24" infeed belt, APQUIP glue system, auto corner feeder w/feed thru belt, assembly section, flying cut off saw, 20', 16' payout table w/(4 & 5) reject saws, CUTLER HAMMER PANELMATE touch screen controls, hydraulic units, spare fingerjointer heads, s/n: FJ-20602 & FJ-20601
  • 2005 WESTERN INDUSTRIAL SYSTEM fingerjointer line, 5/8"-2" thickness, 1-1/2"-8" width capacities, short block, profile section w/(2) trim saws, (2) score heads, 7.5 hp, (2) cutter heads, 20 hp, crossover belt, even end, lug loader, dump bin w/48" infeed belt, 36"x9' infeed belt conveyor, APQUIP glue system, 32"x5' feed thru conveyor, assembly section, flying cut off saw, 20' payout table w/(4) reject saws, CUTLER HAMMER PANELMATE touch screen controls, hydraulic unit, spare fingerjointer heads, s/n: FJ-20411
  • 1994 WESTERN INDUSTRIAL SYSTEM FJ1430-2SD fingerjointer line, 5/8"-2" thickness, 1-1/2"-8" width capacities, short block, profile section w/(2) trim saws, (2) score heads, 7.5 hp, (2) cutter heads, 20 hp, crossover belt, even end, 06M02-06-3 lug loader, s/n: LL-20601, 80"x20' walking floor, 1995 KAMAN dump bin feed w/24" belt, APQUIP glue system, 32"x5' conveyor, assembly section, flying cut off saw, 20' payout table w/(4) reject saws, CUTLER HAMMER PANELMATE touch screen controls, hydraulic unit, spare fingerjointer heads, s/n: FJ-19457
  • INDUSTRIAL fingerjointer line, approx 5/8"-2" thickness, 1-1/2"-8" width capacities, profile section w/(4) saws, (2) cutter heads, s/n: 1WS10L-10-2589, (2) 80"x20' walking bins, 24"x5' & 45' long infeed conveyors, 1987 ISCO DH-F1 lug loader, s/n: 13881, APQUIP glue system, SANDARO 201 automatic spraying system, 18"x30" belt, 3550 assembly section, s/n: 3550 HAL-1-28920, flying cut off saw, 18' payout table w/(4) reject saws, hydraulic unit, controls, electrics, spare fingerjointer heads
  • INDUSTRIAL fingerjointer line, approx 5/8"-2" thickness, 1-1/2"-8" width capacities, profile section w/(4) saws, (2) cutter heads, s/n: 1WS10L-10-785, dump bin feed, 24"x5' infeed belt, 1987 ISCO DH-1F lug loader, s/n: 13882, APQUIP glue system, 16"x4' belt, 3550 assembly section, s/n: 3550HAL-1-24086, flying cut off saw, 18' payout table w/(4) reject saws, hydraulic unit, controls, electrics, spare fingerjointer heads
  • Fingerjointer line w/WADKINS 6' double end tenoner, (6) heads, power travel, clean out belt conveyor, MID OREGON 5-strand infeed transfer & roll case, INDUSTRIAL 3550 assembly section, s/n: 3550HAL-9-26688, flying cut off saw, 20' payout table w/(4) reject saws, 8"x15" belt conveyor

Moulders
  • WEINIG H22B Hydromat 7-head moulder, 4-3/4"x8-5/8", w/spare heads, s/n: 220-1358
  • (5) WEINIG H22AL Hydromat 5-head moulders, 4-3/4"x8-5/8", w/spare heads, s/n's: 2108, 2083, 2073, 1909
  • (4) WEINIG U22AL Unimat 5-head moulders, 4-3/4"x8-5/8", w/spare heads, s/n's: 1749, 1686, 769, 745
  • WEINIG U17A Unimat 6-head moulder, w/spare heads, feed table, s/n: 143-5779
  • WEINIG U17A Unimat 5-head moulder, w/spare heads, s/n: 143-873
  • WEINIG 1612 4-head moulder, w/spare heads, s/n: 1624-338
  • (11) MATTISON 276 4-head moulders, 4"x6", w/spare heads, s/n's: 23533, 22114, 19486, 19259, 16110, 14572, 11843, 11773, 11327
  • WOODS 137MT 4-head moulder, s/n: B33572

Edgers
  • (2) MEREEN JOHNSON 300 edgers w/feed thru chain, s/n's: 2070, N/A

Optimized Chop Saw Line - Cut Stock Lines
  • 1999 PAUL optimized chop saw line w/WOOD EYE cross cut scanner, (3) PAUL optimized chop saws, 12' 4-arm mechanical tilt hoist, 8' 4-arm infeed transfer, (2) infeed transfers to WOOD EYE cross cut scanner, separation table to saws, (6) outfeed belts, kicker sections, drop bins w/chain transfer to rollcase
  • Cut stock line w/(8) PRECISION 14M, (4) CROSS CUT SOLUTIONS, (3) PRECISION parts connection 14" saws w/infeed gravity rolls & lumber gauges, infeed transfer, outfeed belts, (5) sorting bins, substructure
  • Cut stock line w/(14) PRECISION 14M chop saws, infeed gravity rolls, lumber gauges, infeed transfer, outfeed belts, (5) sorting bins, substructure
  • Cut stock line w/(7) INDUSTRIAL 14" chop saws, infeed gravity rolls, lumber gauges, infeed transfer, outfeed belts
  • (2) 1997 MID OREGON WM-11-16 waste master trim saws w/MID OREGON power infeed belt
  • 2002 CROSS CUT SOLUTIONS CS14M-LH chop saw, s/n: 0412-02
  • (2) INDUSTRIAL C500 chop saws, s/n's: C500R-34618, N/A
  • (5) PRECISION 14M chop saws, s/n's: 14986, 14924, 14909, 750, 752

Rip - Re-Rip - Resaws - Sash Gangs - Panel Saw
  • 1999 MEREEN JOHNSON 424-DC gang rip saw, 24" dip chain, 3-1/8" diameter arbor, laser, joystick edge control, KAMAN in & outfeed transfers, conveyors, s/n: MJ-5869
  • 1998 MEREEN JOHNSON 424-DC gang rip saw, 24" dip chain, 3-1/8" diameter arbor, laser, 4'x8' hydraulic tilt hoist, joystick edge control, KAMAN in & outfeed transfers, conveyors, s/n: MJ-5632
  • 1990 KAMAN 12" straight line gang rip saw w/2" arbor, hydraulic tilt hoist, in & outfeed transfers, s/n: 6257E
  • STETSON ROSS 258 12" rip saw
  • SMITHWAY XL108, s/n: 873
  • PORTLAND IRON WORKS shadow line 24" rip saw, AIRMATICS setworks, breakdown hoist, in & out transfers, conveyors
  • 1998 HBR-6 horizontal re-rip w/(6) pockets, 20 hp arbor drive, short block, feed thru belts
  • 1996, 1995 FORTIS DRPA 48" vertical band resaws, s/n's: 1296-044, 0795-044, 40 hp, feed rolls
  • FORESTOR 900 36" vertical band resaw, s/n: 2965
  • STENNER 36 36" vertical band resaw
  • 2004 NEVA type TR88 ECO sash gang saw, 7-1/2"x13-1/2" powered feed rolls, hold downs, auto lube
  • 1998 NEVA type TR97 220/250 sash gang saw, s/n: 905038
  • 1982 PAUL type K4G/800 30" horizontal panel saw, s/n: 8293141

Tenoners
  • MEREEN JOHNSON 300 double end tenoner, 7' capacity, (8) heads, s/n: 6290
  • GREENLEE 545 double end tenoner, 8' capacity, (8) heads, s/n: 50905
  • JENKINS 123 double end tenoner, 6' capacity, (8) heads, s/n: 902
  • GRITZ 600 double end tenoner, 8' capacity, (4) heads, s/n: 23053
  • WADKINS double end tenoner, 5' capacity, (8) heads

Hogs - Metal Detectors
  • 1998 ADVANCED RECYCLING EQUIPMENT Challenger type CG400-4055ST waste reduction grinder, 52"x56" opening, 75 hp, s/n: 0398G0128A
  • SCHUTTE 60 hammer hog, LINCOLN 75 hp/3565 rpm, infeed belt, ALLEN BRADLEY SMC 150 starter
  • (3) 2006 MDI CR85-3000 metal detectors w/XR-7F technology, digital search coil, belt splice bypass, s/n: EV10006

RF Gluers - Glue Rolls - Mix Systems
  • 1998 L&L GA84, 30 kw, 48"x84", in & outfeed, hydraulic unit, s/n: 98-1131
  • 1997 L&L GLU-ALL, 50 kw, 84"x100", in & outfeed, hydraulic unit, s/n: 97-1104
  • 1993 L&L GA84, 30 kw, 48"x84", in & outfeed, hydraulic unit, s/n: 93-1033
  • 1992 L&L GLU-ALL, 30 kw, 60"x120", in & outfeed, hydraulic unit, s/n: 92-988
  • 1990 L&L GLU-ALL, 30 kw, 48"x84", in & outfeed, hydraulic unit, s/n: 90-965
  • 1988 L&L GLU-ALL, 30 kw, 48"x84", in & outfeed, hydraulic unit, s/n: 88-876
  • 1983 L&L GA100, 30 kw, 52"x100", in & outfeed, hydraulic unit, s/n: 83-643
  • L&L GA84, 30 kw, 48"x84", in & outfeed, hydraulic unit, s/n: 0322
  • ROSENQUIST EB900, 30 kw, 48"x84", in & outfeed, hydraulic unit, s/n: 899117531HD
  • ROSENQUIST, 20 kw, 48"x66", in & outfeed, hydraulic unit, s/n: 77146
  • 1995 RADIO FREQUENCY SURFACES 50B16A0300PO, 50 kw, in & outfeed, hydraulic unit, flying cut off saw, s/n: 95-409
  • 2006 JAMES TAYLOR 30J-MZ 13" glue roll, s/n: GA1384
  • 1999 JAMES TAYLOR 300196/300198 13" glue roll, s/n: GA1228
  • 1997 JAMES TAYLOR 300194/300198 13" glue roll, s/n: GA1145
  • (3) BLACK BROS assorted glue rolls
  • PRO MIX, APQUIP, NORDSON glue mix systems

Belt Sander
  • 1992 BOERE BKS1300, 52" 2-bottom head belt sander, 15 kw, s/n: 92014602

Edge Bander - Trimmer & Sander
  • 1993 BARBERAN PL-32 edge bander w/20' infeed rollcase, 20' banding, gluing & press roll section w/NORDSON 5506 bulk meter applicator, LATTNER 24 kw electric boiler, 2.4 hp @ 100 lbs steam, 32' trimmer section w/flying cut off saw & fixed saw, s/n: 8292-06-93, BARBERAN MSR-6/2LP-4C 6-head sanding section, 1993 BARBERAN 8' outfeed transfer rollcase

Presto Log Machines
  • (3) FRED HAUSMAN type FH75/200 presto log/briquettor machines, (2) w/GLOMERA type 75/200 controls, 3" diameter, mechanical piston compression, auger feeder, 75 hp, controls, s/n: 21377

Palletizer - Box Former - Shrink Wrapper - Stretch Wrap - Plastic Banders
  • COLUMBIA 38098TTC160 automatic pallet transfer/stacker, powered infeed belt/rollcase, powered outfeed rollcase, s/n: 0206850200ELRRDV56
  • SOFTEC INDUSTRIES Mark Ark I box former, s/n: 5001 w/NORDSON 2302 hot melt glue applicator, s/n: AA94C61638
  • WELDOTRON 1209 shrink wrapper, s/n: XF825210 w/WELDOTRON 7603 heat tunnel, s/n: XF87376, in & outfeed gravity rolls
  • LANTECH LANRAPR SVS80LC automatic stretch pallet wrapper, 48"x48" turntable, s/n: 9281-11671
  • SIGNODE spiral grip 60" automatic stretch pallet wrapper, 48"x48" turntable
  • SIGNODE Spirit plastic strapping machine, s/n: A2279
  • SIGNODE MCD-710, MCD 700 plastic strapping machines, s/n: 14092

Balers - Compactors - Scissorlifts
  • VALU-LINE KV-60 hydraulic vertical baler, s/n: 680141
  • Custom built hydraulic vertical baler
  • Custom built hydraulic compactor
  • (2) Custom built hydraulic lumber bumps
  • Scissorlifts & breakdown hoists; rotary turntable
  • (2) 48"x96" scissorlifts
  • 48"x60" scissorlift w/gravity rolls
  • (3) 30"x48" scissorlifts
  • 30"x36" scissorlift
  • 4'x12' hydraulic operated scissorlift tilt hoist
  • PORTLAND & COMMAND breakdown hoists
  • 6'x8' diameter turntable w/drive

Baghouses - Chip Bins - Spark Detection System - Walking Floor Bins
  • PNEUMAFIL 65000 scfm baghouse w/300 hp blower, 448 12' bags, rotary air
  • PNEUMAFIL 52000 scfm baghouse w/200 hp blower, 448 12' bags, SUTORBILT 7'x18" high pressure blower, silencer, rotary air lock, piping, stand, electrics
  • CAROTHERS & SON 50000 scfm baghouse w/200 hp blower, 224 12' bags, SUTORBILT 8"x18" high pressure blower, silencer, 20"x20" feeder, piping, stand, electrics
  • TORIT & DAY 40000 scfm baghouse w/200 hp blower, 484 12' bags, WESTERN PNEUMATICS 20"x25" feeder, piping, stand, electrics
  • (2) PEERLESS 30-unit chip bins, air operated, x-over auger, 4' cyclones, WESTERN PNEUMATICS feeder
  • PEERLESS 20-unit chip bin, air operated
  • (2) CAROTHERS 14-unit chip bins, air operated
  • CLARKES C-1 spark detection & suppression system
  • (2) CLARKES Pyroguard spark detection & suppression systems
  • High & low pressure blow pipe, diverters
  • (3) 80"x20', (2) 84"x16' hydraulic walking floor bins

Compressors - Dryer - Receivers
  • 2002 QNW 601-D rotary screw compressor, 125 hp, 30,716 hrs, s/n: 020221
  • 2002 QNW 601-D rotary screw compressor, 125 hp (new, never installed), s/n: 020222
  • SULLAIR 25-150L rotary screw compressor, 150 hp, s/n: 40794EGH
  • SULLAIR 24KT rotary screw compressor, 40 hp, s/n: N/A
  • SULLAIR 10B-25 rotary screw compressor, 25 hp, s/n: 003-56499
  • SULLAIR SRD-1000AC refrigerated air dryer, s/n: 005-D15668
  • (3) 3'x9' air receivers
  • (3) 3'x6' air receivers
  • 30"x48" air receiver

Grinding Room
  • 1997 WEINIG RONDAMAT 934 profile grinder, s/n: 934-861
  • 1992 WEINIG RONDAMAT 912 profile grinder, s/n: 912-931
  • 1991 WEINIG RONDAMAT 936 profile grinder, s/n: 936-142
  • ARMSTRONG 2RH sharpener, s/n: 17636
  • (100+) spare band & round saws
  • (50+) fingerjointer & moulder heads

Boiler
  • AJAX WG-135 gas fired package boiler, 1,375,000 btu/hr input, 132 sq ft heating surface, s/n: 7931644

Electrical
  • Large assortment of spare starters; breakers; disconnects; contactors; fuses; timers; relays; lighting; push buttons; conduit & fittings; wire; motors to 300 hp; gearheads; reducers

Machine Shop
  • CADILLAC 17"x72" engine lathe, 32-1800 rpm spindle speeds; WELLS index vertical mill, 9"x46-1/2" T-slot table; STAR 7"x12" horizontal metal cutting bandsaw; OTC 50 ton shop press; AEROQUIP hose crimper; JET JDF-17MF drill press; MILLER BOBCAT 225 225 amp/8000 watt gas AC/DC welder generator; MILLER SRH 404 DC welder; MILLERMATIC 200, 200 amp wire feed welder

Rolling Stock
  • 1992 CAT 916 rubber tire front end loader, diesel, enclosed cab, 92" wide bucket, s/n: 2XB02044
  • 2005 HYSTER H90XMS 9,000 lb HRT forklift, propane, 169" lift, 3-stage mast, sideshift, overhead guard, s/n: L005V05625C
  • 1993 HYSTER H80XL 8,000 lb dual HRT forklift, propane, 169" lift, 2-stage mast, sideshift, s/n: G005D01847P
  • 1990 CLARK C500-YS80 8,000 lb pneumatic forklift, propane, 188" lift, 3-stage mast, sideshift, overhead guard, s/n: Y685-0825-7575KOF
  • 1981 CLARK C500-Y90 8,000 lb pneumatic forklift, propane, 147" lift, 2-stage mast, overhead guard, s/n: Y685-102-4845
  • 1989 HYSTER S50XL 5,000 lb HRT forklift, propane, 187" lift, 3-stage mast, fork rotator, overhead guard, s/n: A187V13425K
  • (2) 2002 HYSTER H35XM 3,500 lb HRT forklifts, propane, 189" lift, 3-stage mast, sideshift, overhead guard, s/n's: E001H02240Z, E001H02241Z
  • 1997 HYSTER H35X 3,500 lb HRT forklift, propane, 189" lift, 3-stage mast, sideshift, overhead guard, s/n: D001H03725U
  • 2005, (3) 2004 HYSTER H35XM 3,500 lb HRT forklifts, propane, 3-stage mast, sideshift, overhead guard, s/n's: E001H03242C, E001H02946B, E001H02781B, E001H02709B
  • 1995 HYSTER H30XM 3,000 lb forklift, propane, s/n: D001H02389S
  • 1993, 1992 HYSTER H30XL 3,000 lb HRT forklifts, propane, 174" lift, 3-stage mast, side shift, overhead guard, s/n's: C001B13611P, C001B13115N
  • 1989 HYSTER S30XL 3,000 lb HRT forklift, propane, 3-stage mast, sideshift, overhead guard, s/n: B010B6351K
  • 1987 HYSTER H25XL 2,500 lb HRT forklift, propane, 130" lift, 2-stage mast, sideshift, overhead guard, s/n: C001B5876H
  • 1990 TOYOTA pickup, 4WD, 4 cyl gas, manual trans

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Thursday, May 1.
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #1960

DRIVER DIRECTIONS
  • From east or westbound I-90, take the Sullivan Road exit (#291B).
  • Drive north on Sullivan Road approximately 1.3 miles to East Euclid Avenue.
  • Turn right and drive east on Euclid approximately 1.1 miles to N Flora Road.
  • Turn left on Flora. The auction site is ahead, on the right.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2008 James G. Murphy Co.
All rights reserved worldwide