|
PLUM CREEK NW LUMBER
9AM - TUESDAY - MAY 12
Preview 8-4, Monday, May 11
Fortine, MT
Display Catalog | X Lots
Downloadable PDF Catalog
Advance Bid Center
|
|
Pedestal Mount Log Loader
|
- PRENTICE 610 hydraulic pedestal mount log loader, 34' boom w/swivel grapple, 150 hp, enclosed cab
|
|
Whole Log Cut Off Saws
|
- KOCKUMS 66" high speed insert tooth whole log cut off saw, TOSHIBA 60 hp/1180 rpm, 20' infeed, 40' outfeed box chain, log hauls w/10 hp, REX VENUS 126 rpm reducer
- Shop built 66" whole log insert tooth cut off saw, feed thru hourglass rolls, ALLEN BRADLEY size 4 starter
- (2) shop built 48" whole log insert tooth cut off saws, 75 hp, clamp, feed thru hourglass rolls, TOSHIBA 7.5 hp, REX VENUS reducer, hydraulic top feed roll, 6' hydraulic rotary kicker, (2) ALLEN BRADLEY size 4 starters
|
|
Log Decks-Hauls-Transfer-Belt-Rotary Kickers
|
- 50' 8-strand W132 chain log deck, S-drive, 32' dump pan, 10 hp motor, REX EARTH reducer
- 40' 6-strand W132 chain log deck, S-drive, 32' warm LS&L, RELIANCE 10 hp, REX EARTH reducer
- 40' 4-strand W124 chain log deck, H-shaft, 10 hp, FALK reducer
- 27' 6-strand W124 chain log deck, S-drive, 20' 6-arm LS&L, 10 hp, REX EARTH reducer
- 50' 8"x15" box chain log haul w/hydraulic drive
- 40' 8"x15" box chain log haul, 10 hp, REX reducer
- 40' & 20' box chain log hauls, 10 hp, REX VENUS 126 rpm reducer
- 35' 2-strand H84 chain log transfer, 7.5 hp, REX VENUS 48 rpm reducer
- 16' 6-arm hydraulic driven rotary log kicker
- (2) 6' 2-arm hydraulic driven rotary log kickers
|
|
Step Feeders
|
- (2) Shop built hydraulic 10' 6-step log step feeders w/12' 4-strand 81X infeed, TOSHIBA 7.5 hp, REX VENUS 32 rpm reducer, 50' 3-strand 81X infeed, TOSHIBA 10 hp, REX EARTH 16 rpm reducer
|
|
Head Rig
|
- 1988 SALEM 6' high strain, double column right hand bandmill headrig w/direct air strain @ 35000 lb max, approx 200 hp/885 rpm drive, feed thru slat bed, 5 hp saw strain, 3 hp saw guide motors, ABB 400 hp starter
|
|
Log Turner
|
- Shop built hydraulic chain style log turner w/12' 3-strand log unscrambler
|
|
Carriage & Carriage Drive
|
- 1988 SALEM 30"x9' Temposonic positioned 2-knee right hand log carriage, 5' between knees, 2 trucks, tong dogs, flippers, pantograph, 90 lb rail, hydraulic cable take ups, KAMAN 20 hp, INOVEC 15 hp hydraulic units
- TYRONE BERRY SMA230, 100 hp hydraulic, carriage drive, s/n: 5002/4017
|
|
Resaws
|
- LETSON BURPEE 5' Temposonic positioned twin vertical sharp chain resaw, 3"x6' min to 15"x9' max capacities, full air strain, RELIANCE 125 hp/1155 rpm, 12' infeed log centering rolls, COMMAND 32' hydraulic driven sharp chain, hold down roll twin 18"x7' slab belts, 5 hp, REX MERCURY reducers, ALLEN BRADLEY 1336 frequency drives, (2) ALLEN BRADLEY size 5 reduced voltage starters, ALLEN BRADLEY size 4 RVS, ALLEN BRADLEY remote 1/0 adaptor, s/n: 2477
- MCDONOUGH 60" twin vertical sharp chain resaw, TECO 100 hp/1180 rpm, SIEMENS 100 hp/1175 rpm, log centering rolls, 36' hydraulic driven sharp chain hold down rolls, twin 18"x7' slab belts, 3 hp, SEW 22.29 ratio reducer, 5 hp, 15 hp, & 50 hp SAS hydraulic units, electrics (not installed)
|
|
Edgers-Reducer-Optimizer
|
- 1998 MCGEHEE 4"x30" splined top arbor lineal robo guide edger, TOSHIBA 250 hp/3600 rpm arbor drive, 3-saw setworks, Temposonic positioning, climb cut, clam shell opening, 20" saws, CAE 60 hp, KAMAN 30 hp hydraulic units, feed thru chains & rolls, TOSHIBA & RELIANCE 7.5 hp, REX 6.12:1 reducers, press rolls, 32"x13' outfeed belt w/Temposonic positioned shifting finger trailer, BALDOR 7.5 hp, SM CYLO 6:1 reducer, SKK 7.5 hp/45 rpm gearhead motor, ALLEN BRADLEY size 6 starter, PLC
- 1998 CAE reman reducing head, TOSHIBA 200 hp, key knife segmented knives chipping head, feed rolls, TOSHIBA 7.5 hp, REX MERCURY 6.12:1 reducer, nominal 1" down position, 12' powered infeed rollcase, (4) 9"x27" rolls, 4' 3-strand jump transfer w/drives, ABB size 6 starter, ALLEN BRADLEY PLC-40
- 1998 CAE/NEWNES OPT-LEH-01 lineal cant optimizer w/(3)HYDRA sensor laser/cameras, (3) spare re-buildable laser/cameras, 24"x45' feed thru belt, BALDOR 10 hp, SM CYCLO 6:1 reducer, s/n: 98-809-DO
- UKIAH 6"x30" splined bottom arbor gang edger, TECO 250 hp, (8) knurled feed thru rolls, RELIANCE 25 hp, HYPOWER 7.95:1 reducer, (4) press rolls, climb cut, clam shell opening, 22" saws, UKIAH saw glide system, 8' hydraulic infeed rollcase w/8' 3-strand infeed transfer, outfeed slat bed to 8' 3-strand outfeed transfer, SKK gearhead motor, mini laser rack, 15 hp hydraulic unit
|
|
Trimmers
|
- 10' precision end trimmer w/(2) approx 22" saws, 10 hp/3500 rpm, 13' 4-strand lugged feed thru transfer, NEWNES lug loader, 8' 3-strand infeed transfer, even end rollcase, drives
- Precision end trimmer, 8'-9' capacity w/(2) approx 22" saws, 3500 rpm, 12' 4-strand lugged feed thru transfer, even end rollcase, 13' 3-strand, 14' 3-strand infeed transfers, drives
|
|
Hog Fuel Bin-Metering Bins-Wrapper Removal Station-Tarping Station
|
- Approx 40-unit hydraulic hog fuel bin w/15 hp hydraulic unit
- Approx 30-unit hydraulic hog fuel bin
- (2) Approx 20-unit hydraulic bins (not installed)
- 9'W x 20'L x 12'H live bottom metering bin w/dual screw augers, SKK 7.5 hp/45 rpm gearhead motor
- 8-arm wrapper removal station w/hydraulic unit
- Dual tower adjustable height tarping station w/catwalk
|
|
Blowers & Feeders
|
- 10"x30" blower, RELIANCE 100 hp, silencer
- ARCHER 10"x30" blower , TOSHIBA 100 hp, silencer
- 30"x30" feeder, TOSHIBA motor, DODGE shaft mounted reducer
- ARCHER 24"x30" feeder, 5 hp motor, FALK 37 rpm shaft mounted reducer
|
|
Sorter
|
- NEWNES 10' 27-bin J-bar sorter, 1"x3"x5' min x 3-1/2"x8"x10' max capacities, NEWNES sorter controls, AB 5/40 PLC, computer, monitor, LINCOLN 30 hp, REX VENUS 126 rpm reducer sorter drive, (4) 33' 3-strand infeed transfers, even end rollcase, 45'-41' & 20' 4-strand take away transfers, drives
|
|
Stackers
|
- NEWNES 9' hydraulic over end sticker stacker w/LINDEN auto sticker placer, 4-arm lumber lowering hoist, 52" arms, (3) lumber placing arms, 14' 3-strand feed thru transfer, 11' 6-strand unscrambler, 25' 4-strand infeed transfer, all drives, 45 hp hydraulic unit
- NEWNES 8' over end stacker w/3-arm lumber lowering hoist, 52" arms x 44" travel, (4) lumber placing arms, 9' 3-strand feed thru transfer, even end rollcase, 9' 3-strand infeed transfer, drives
|
|
Planer-Pineapple Feed Table-Outfeed & Slow Down Belts
|
- WOODS 415M2 planer, 8"x15", (16) knives, (4) heads, approx 100 hp top, 50 hp bottom & 35 hp side heads, (4) hydraulic infeed, (2) hydraulic driven outfeed rolls, PFS 75 hp hydraulic unit, spare heads, parts, jointer bars, s/n: 31562
- 13' hydraulic dual pineapple feed table w/(3) 9"x30" spiral, (2) 9"x30" smooth rolls
- 24"x7' hydraulic outfeed belt
- 30"x8' slow down belt w/SKK 4 hp/190 rpm gearhead motor, AB 1305 frequency drive
|
|
Tilt Hoist-Sticker Recovery-Rotary Table-Planer Blower
|
- 10' hydraulic tilt hoist w/(2) 60" arms x 108" travel, 30 hp hydraulic unit, 14' 3-strand 81XHD infeed transfer, SKK 5 hp/45 rpm gearhead motor, 40' 2-strand H84 outfeed, motor, REX VENUS 48 rpm reducer
- 30' 2-strand sticker recovery transfer w/RELIANCE 1 hp motor, REX reducer, 11"x30' sticker recovery belt, SKK 2 hp/155 rpm gearhead motor, sticker racks
- 20' diameter rotary table, RELIANCE 3 hp, DODGE reducer
- WESTERN PNEUMATICS approx 40" blower, SIEMENS 40 hp
|
|
Bander
|
- SIGNODE dual tower plastic bander w/power strap feeder, top & side squeeze, 6' hydraulic drive, (4) 9-1/2"x54" rolls, 35 hp hydraulic unit
|
|
Boiler-Fuel Silo
|
- NEBRASKA type A series WTS-2-36 wood fired boiler, 250 psi, 3290 sq ft heating surface, 859 ft3 boiler volume, 432 ft3 combined chamber volume, 5' 6" cell assembly, 42" ID drum, 24" OD drum, 40 hp ID fan, 15 hp OD fan, condensate tank w/pumps, chemical & water make up tanks, multi-cone recovery, fuel feed auger & conveyor
- WELLONS A-30 fuel silo w/agitator, ratchet drive, approx 30' high x 33' across, s/n: 9729B
|
|
Kilns-Drying Shed-Rail
|
- (2) WELLONS 33'x108' double track multi-zone steam fired kilns, all aluminum, 16' doors, 3-1/2" coil, (10) 72" aluminum kiln fans, TOSHIBA 15 hp/885 rpm, FISHER valves, condensate tank & pump, WELLONS controls, computer, 10'x66' control house
- 28'H x 73'W x 120'L all steel clear span lumber drying shed
- 3040' kiln rail
|
|
Filing Room
|
- ARMSTRONG #4 LH bandsaw sharpener w/#54 clamp, s/n: 2203
- ARMSTRONG #4-22 bandsaw sharpener w/#54 clamp, s/n: 6601
- VOLLMER PMH10U swager, s/n: 1294
- HANCHETT 20-834 bandsaw shear
|
|
Electrics
|
- ALLEN BRADLEY 2100 series 10-section MCC w/(40) switches
- ALLEN BRADLEY 2100 series 8-section MCC w/(32) switches
- ALLEN BRADLEY 2100 series 6-section MCC w/(26) switches
- (2) ALLEN BRADLEY 2100 series 4-section MCC w/(18) switches
- ALLEN BRADLEY 2100 series 3-section MCC w/(11) switches
- ITE 4-section 3000 amp main w/(2) 800 amp, (5) 600 amp disconnects, metering sections
- (2) ABB RVS 12 power factor controllers, ABB 400 hp starter
- ABB size 6 starter
- ALLEN BRADLEY size 6 starter
- (3) ALLEN BRADLEY size 5 starters
- (4) ALLEN BRADLEY size 4 starters
- ALLEN BRADLEY PowerFlex 4 drive
- ALLEN BRADLEY SMP Plus drive
- (2) ALLEN BRADLEY 1305 drives
- ALLEN BRADLEY 1336 Plus II drive
- ALLEN BRADLEY 1336 Plus
- (4) ALLEN BRADLEY 1336 drives
- (4) ALLEN BRADLEY 1336 dynamic brakes
- (3) ALLEN BRADLEY 5/40 PLC's
- ALLEN BRADLEY 5/30 PLC
- (3) ALLEN BRADLEY remote 1/0 adaptors
- Installed motors to 250 hp, electrical stores, wire, conduit
|
|
Conveyors-Transfers-Rollcases
|
- MILL POWER 24"x101' vibratory conveyor w/TOSHIBA 15 hp motor, s/n: 86128
- VIBRA PRO HSR-241200FS, 24"x67' vibratory conveyor, TOSHIBA 7.5 hp, s/n: 1781
- VIBRA PRO HSR-241200FS, 24"x47' vibratory conveyor, RELIANCE 7.5 hp, s/n: 1779
- VIBRA PRO HRS-241200FS, 24"x33' vibratory conveyor, TOSHIBA 3 hp, s/n: 2116
- VIBRA PRO HSR-721200F, 71"x28' vibratory conveyor, TOSHIBA 10 hp, s/n: 2103
- VIBRA PRO HSR-181500FS 18"x26' vibratory conveyor, RELIANCE 3 hp, s/n: 1437
- VIBRA PRO BLS-240900FS-3, 18"x66' vibratory conveyor, TOSHIBA 5 hp, s/n: 1915
- VIBRA PRO 18"x59' vibratory conveyor, RELIANCE 5 hp
- VIBRA PRO 24"x25' vibratory conveyor, TOSHIBA 5 hp
- VIBRA PRO 45"x28' vibratory conveyor, TOSHIBA 5 hp
- VIBRA PRO 18"x19' vibratory conveyor
- 18"x52' vibratory conveyor, paddle type
- 12"x20' vibratory conveyor, paddle type
- (16) belt conveyors to 60'
- (4) chain conveyors to 80'
- (86) lumber transfers to 51'
- (19) rollcase to 33'
|
|
Buildings
|
- 1996 PBS 31' 4"H x 36'W x 203'L, 26 ga all steel clear span sorter building, 2/12 pitch, live load 38 PSF, wind load 80 mph, seismic zone 3#, mechanical load 3# PSF, dead load 2# PSF
- 28'H x 73'W x 120'L all steel clear span lumber drying shed
- 16'-19'H x 100'W x 170'L all steel sawmill building
- 25'-29'H x 60'W x 100'L all steel planer building
- 15'-16'H x 37'W x 52'L all steel reducer building
- 24'-26'H x 26'W x 52'L all steel chipper building
- 30'-34'H x 32'W x 32'L all steel boiler building
|
|
Rolling Stock
|
- WAGNER L100 rubber tire log stacker, 33.5-33 tires, s/n: 093193
- (4) WAGNER L90 rubber tire log stackers, 33.5-33 tires, s/n's: 907006, 90912, 039266, 039232
- LINKBELT LS-3400CII track mounted log loader w/boom, 28" triple grouser tracks, s/n: 1272-0509
- LINKBELT LS-3400CII track mounted log loader, 28" triple grouser tracks, s/n: 34OU2-5870 (parts machine)
- CAT 950 wheel loader, CAT diesel, 9' bucket, s/n: 81J11577
- HYSTER H225D 22,500 lb dual pneumatic forklift, diesel, 218" 2-stage mast, sideshift, 54" forks, 50677 hrs, s/n: 70Y01157
- HYSTER H200HS 20,000 lb dual pneumatic forklift, diesel, 212" 2-stage mast, sideshift, 54" forks, 8858 hrs, s/n: C007P02215Y
- HYSTER H190HD 19,000 lb dual pneumatic forklift, diesel, 183" mast, sideshift, 54" forks, 81568 hrs, s/n: G007E02154C
- HYSTER H165E 16,500 lb dual pneumatic forklift, diesel, 2-stage mast, 48" forks, 4388 hrs, s/n: B7P3147K
- HYSTER H80XL 8000 lb HRT forklift, propane, 145" 2-stage mast, sideshift, 4' forks, 2641 hrs, s/n: GOO5D11606V
- HYSTER H60 6000 lb dual pneumatic forklift, diesel, 122" 2-stage mast, sideshift, 46" forks, s/n: C005D17649X
- HYSTER pneumatic forklift, gas, 165' 2-stage mast, sideshift, 42" forks, 01782 hrs, s/n: F3D2908F
- WESTERN WHITE STAR 4964-2 boom truck, NTC-350 diesel, 1252-A transmission, PITTMAN hydraulic lift, 54' 9" boom, 16000 max capacity, outriggers, 5th wheel
- 1996 CHEV 1500, 4x4 pickup, gas, auto
- 1996 CHEV 1/2 ton extended cab pickup, gas, auto
- (2) 1995 FORD 1/2 ton extended cab pickups, gas, auto
- 1995 CHEV 1500 4x4 pickup, gas, auto
- 1992 FORD RANGER DELUXE pickup, gas, auto
- 1992 FORD 1 ton crew cab pickup, gas, auto
- (4) 1992 FORD 1/2 ton extended cab pickups, gas, auto
- 1990 CHEV CHEYENNE pickup, gas, manual
- 1989 FORD F250 pickup, gas, manual
- 1986 CHEV CUSTOM DELUXE pickup, gas, manual
- 1982 FORD F150 pickup, gas, manual
- 1980 CHEV CUSTOM DELUXE 4x4 pickup, gas, manual
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT: Full payment must be made by no later than 4pm, Wednesday, May 13.
- A 25% deposit is required by the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #1960
|
|
Lodging:
|
| Best Western Rocky Mountain Lodge - Whitefish, MT | 406-862-2569 |
| Ksanka Motor Inn - Eureka, MT | 406-297-3127 |
| Silverado Motel - Eureka, MT | 406-297-7777 |
| Super 8 - Whitefish, MT | 406-862-8255 |
|
|
Glacier Park International Airport - Kalispell Montana
|
| Delta Airlines/Skywest | 800-221-1212 |
| Horizon Air | 800-547-9308 |
| Northwest Airlines | 800-225-2525 |
| United Airlines/Skywest | 800-864-8331 |
|
|
DRIVER DIRECTIONS
|
- From Whitefish, MT drive north toward Eureka on US-93 for approximately 39 miles. Mill is visible from the highway on the right.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2009 James G. Murphy Co.
All rights reserved worldwide
|
|
|
