|
PETERSEN MACHINE WORKS
TUESDAY - JUNE 30 - 10AM
Preview 10 to 4, Monday, June 29
7402 44th NE, Marysville, WA
Past Auction - held in 1997/98
|
|
MACHINE SHOP EQUIPMENT & TOOLS
|
BRIDGEPORT Series 1 CNC vertical machining center w/BRIDGEPORT/TEXTRON CNC
controls, 24 position tool changer, 12"x34" table
BRIDGEPORT Series 1 vertical milling machine w/BRIDGEPORT/TEXTRON digital
readout, 13"x34" table, 2 hp
(2) BRIDGEPORT Series 1 vertical milling machines, (1)w/MITUTOYO, (1)
w/PROTOMAX MX2 digital readouts, 9"x42" table, 2 hp, s/n's: 190561, 233637
JET JVM1248VS vertical milling machine w/ACU-RITE III digital readout,
10"x48" table, 5 hp, 220/440v, s/n: 180026
VAN NORMAN vertical milling machine w/BRIDGEPORT head, ACU-RITE digital
readout, 14"x64" table, s/n: A4425
LAGUN FU3LA horizontal milling machine w/Universal head, #50 taper, (2)
outboard bearings, 13"x63" table, s/n: 37612223
CLAUSING Colchester lathe, 17" swing, 100" bed, 3-jaw chuck, tool post,
s/n: 0017-08049
SHARP 2580 lathe, 25" swing, 80" bed, 3-jaw chuck, tool post, s/n: 35
SUNNEN LBB1699 hone, w/SUNNEN AG 300 precision gage, 1/2 hp, 115/230v,
single phase
JET JSG618 surface grinder w/6"x18" mag chuck, s/n: 73110
VAN NORMAN tool grinder w/3-jaw chuck
JET VBS400 band saw w/16" throat, blade welder, s/n: 41504
JET HBS10M horizontal band saw w/outfeed conveyor
STARTRITE CF350SA chop saw
BLACK & DECKER 14" chop saw
BURR KING 760 1" belt sander, 1/2 hp, 115/230v single phase
B-LINE 12" disc sander, 1/2 hp, 115/230v, single phase
WILTON 12"disc/6" belt sander
UNION MABGO12UFC 8" pedestal grinder, 1 hp, 110v, single phase
JET 8" pedestal grinder, 110/230v, single phase
THOR 5770 8" pedestal grinder, 1/2 hp, single phase
DAREX M2 drill sharpener
PACKARD 120F-IND drill press, 3/4 hp
(3) JET OR1758 pedestal drill presses, 1/2 hp, 115v, single phase
MILWAUKEE mag drill
ECONOLINE RA-42X24 sand blast cabinet, s/n: E89-3490
ZERO DCM 175 sand blast cabinet, s/n: 806
BARTH shear
TENNSMITH 16-6 notcher
(3) Shop built hydraulic presses, 117 ton, 30 ton, 17 ton
INGERSOLL-RAND T30 25 hp air compressor
CURTIS Challenge Air 5 hp air compressor
BIG JOE 1086 lift truck
JET 1-ton chain hoist
ELEPHANT 1/2 ton chain hoist
MILLER Syncrowave 300 300 amp welder
MILLER CP250TS 250 amp welder w/MILLER XR wire feeder
LINDE 160 160 amp welder
MILLER Millermatic 150 150 amp welder
MILLERMATIC 30E wire feeder
MASTER VIEW optical comparator
ROCKWELL Phase II hardness tester
STARRETT 24"x36" granite surface block
STARRETT 24"x48" granite surface block
New MITUTOYO Digimatic 24" height gage
New MITUTOYO Digimatic 40" calipers
Large selection of NEW inspection equipment including MITUTOYO calipers,
STARRETT surface, hole, radius, & thickness gages, STARRETT inspection
blocks & parallels, as well as V-blocks, bore & depth gages, broaches, pin
gage sets, straight edges & more
Assortment of power tools including MILWAUKEE drills, BLACK & DECKER,
MILWAUKEE & MAKITA grinders, hand tools, work benches, welding supplies,
tool holders, (17) 2-door storage cabinets on casters, machine vises,
machine tooling, material racks, inventory of flat, bar, round stock, office furniture including, desks, chairs,
file cabinets, office equipment, and more
|
|
ROLLING STOCK
|
1979 CHEV C70 21' flatbed, V8, auto
1989 CHEV 12' flatbed, V8, 4 spd
1994 FORD Ranger XLT pickup, 6 cyl, 5 spd, w/canopy
|
|
PROPERTY AVAILABLE FOR LEASE
|
Approximately 7400 sq. ft. manufacturing facility w/office area. For
information call Gerald Petersen, 360-659-2619.
|
FORTUNE MANUFACTURING, ARLINGTON, WA
MACHINE SHOP EQUIPMENT & TOOLS
|
NIAGARA HBM 1-3-5-8-10 10' press brake w/AUTOGAUGE CNC 1000 auto
backgauge, 104" between uprights, 460v, 3 phase, s/n: P53264
(2) BRIDGEPORT vertical milling machines, (1) w/ACU-RITE, (1) w/MITUTOYO
digital readouts, 9"x42" tables, 5 hp, 3 phase, s/n's: 153430, 215351
LIH CHANG vertical milling machine w/MITUTOYO digital readout, 9"x42"
power feed table, 2 hp, 220/440v, 3 phase, s/n: 3987
POWERMILL KONDIA vertical milling machine w/BRIDGEPORT head, ACU RITE
digital readout, 9"x42" power feed table, 5 hp 208-220/440v, 3 phase
ENCO 100-1529 vertical milling machine w/ENCO digital readout, 9"x42"
power feed table, 220/440v, 3 phase, s/n: 7735
(3) ACROLOC vertical machining centers w/GENERAL NUMERIC GNC controls, 12
tool stations
TIDA TD6B lathe, 15" swing, 40" center distance, tool post, collet chuck,
3 & 4-jaw chucks
HARDINGE Super Precision chucker w/8-station turret, HARDINGE CT-A head
NIAGARA IN6 6'x12 ga MS shear, w/backgauge
KENTON 6' press brake, 64" between uprights
9F-75 punch press w/AIRFLEX controls
WILLIAMS WHITE 600 ton hydraulic press, 20 hp, 230/460v, 3 phase, s/n: C-1604
HANNIFIN S-100-96-12-4-1-SP 100 ton hydraulic press, 15 hp, s/n: T3828
WEINKER MACHINE hydraulic press, 40 hp
Shop built hydraulic press
HAEGER HP6 stud press, 230v, 3 phase
4A-4 punch
DAKE arbor press
Corner notcher
TENNSMITH R42 22 ga hand rolls, s/n: 14627
RAMCO T-JAW1000 band saw w/39" throat, blade welder, 440v, 3 phase, s/n:
910003
WELLS AC-7 horizontal band saw, 3/4 hp, 115/208v, s/n: 91279
ENCO 135-1545 band saw w/14" throat, blade welder, s/n: CL1304
CENTRAL 10" table saw
RYOBI 10" mitre saw
SKIL worm drive circular saw
MASTER 7-1/4" circular saw
CHEVALIER surface grinder w/6"x18" magnetic chuck
SUNNEN LBN bushing grinder, 1/4 hp, 115v, single phase, s/n: 43604
APEX 16" disc sander, 1-1/2 hp, 208-230/460v, 3 phase
UNION TOOL SB6X12 12" disc/6" belt sander, 2 hp, 115/230v, single phase
ENCO SB150 6" grinder/2" belt sander, 1/3 hp, 110/220v, single phase
FOREMOST MADPO36AMA bench mount drill press
CRAFTSMAN 15" pedestal drill press, 1 hp
(2) BALDOR 6" bench grinders, 1/3 hp
(3) 6" bench grinders, 3/4 hp
SNAP ON YA434C abrasive blast cabinet
HUTSON Burr Bench 2016BB deburring machine, 115v, single phase, s/n: 80-207
BLUE M 9660F-1X Stabil-Glow 2000 degreee F furnace, w/HONEYWELL controls,
20kw, s/n: LV-1711
BAC RT48 rinse tank
BROWN & SHARPE Validator coordinate measuring machine
ROCKWELL hardness tester
WILSON 103R hardness tester
MAGNAFLUX digital conductivity meter
KJ LAW Verimet digital conductivity meter
(3) MITUTOYO 24" height gauges
24"x36", 18"x24", 16"x84" granite surface blocks
Large assortment inspection equipment, machine vises, work benches,
machine tooling, collets, chucks, tool cabinets, material racks, pallet
racks, shipping room supplies, hand & power tools, aluminum sheet in
various gauges, bar, rod & tube stock, much more
|
|
ROLLING STOCK
|
TOYOTA 3000 lb cushion tire forklift, 4 cyl gas
|
|
OFFICE FURNITURE & EQUIPMENT
|
(3) 36"x72" wood desks
(3) 30"x60" wood desks
30"x60" metal desk w/RH return
(3) 6'x8' L-shaped modular work stations w/shelf, 2-drawer pedestal file
4'x10' boat style conference table
(3) 8' folding tables
Leather executive chair w/(4) matching arm chairs
(8) swivel arm chairs
(10) arm chairs
(2) secretarial chairs
(2) 5-drawer letter files
(6) 4-drawer legal files
(11) 4-drawer letter files
PITNEY BOWES 9820 fax machine
Assortment of COMPUTECH, NCC, CVC, MAXTECH & others computers, OKIDATA
Microline 391+ & PANASONIC KX-P 4420 laser printers, CFT SmartCam software
package, office equipment & supplies & much more
|
|
TERMS & CONDITIONS
|
PAYMENT: Full payment at each auction must be made by no later than 4pm
the day following each auction.
A 25% deposit is required by the close of business, each auction day.
Cash, cashiers check, Master & Visa Cards only.
Personal or Company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction. All Purchases must
be removed 1 hour after the sale or between 8 am & 4:30 pm Wednesday &
Thursday, July 1 & 2 at Petersen Machine and Thursday & Friday, July 2 & 3
at Fortune Mfg.
Announcements made by the auctioneer at the time of sale take precedence
over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments in
a separate and/or aggregate basis.
Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
PETERSEN MACHINE WORKS
From north or southbound I-5, take the Marysville exit(#199). Drive east
on 4th Street 3/10 mile to State Avenue. Turn left and drive north on
State Avenue approximately 6/10 mile to Grove Street. Turn right and
drive east on Grove approximately 2/10 m
ile to 44th Avenue NE. Turn left and drive north on 44th to the auction
site, located on the left.
FORTUNE MANUFACTURING
From north or southbound I-5, take the Smokey Point/Arlington Airport
exit(#206). Drive east on 172nd NE to 59th Avenue NE. Turn left and
drive north on 59th to 188th Street NE. Turn left on 188th into the
Arlington Airport then immediately right onto
the perimeter road. Drive north approximately 1/10 mile to the auction
site, located on the left.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
|
Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions
Registration Form | Advanced Bid Overview | Terms & Conditions
 Back to Top
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|
