Click small pics to enlarge
Wetsel-Oviatt

WEDNESDAY & THURSDAY - JANUARY 28 & 29
10AM Each day
Preview 10am to 4pm, Tuesday, January 27 or by appointment
El Dorado Hills(Sacramento), CA

Past Auction - held in 2004

Display Catalogs: Day 1 | Day 2 | X Lots

Downloadable PDF Catalog

Advance Bid Center

DEBARKERS, SAWS, METAL DETECTORS
  • 1986 SALEM Mk II 21" 5-arm ring debarker, RELIANCE 75 hp DC ring drive, FRANK 30 hp feed drive, air ring, alligator chain in & outfeed, SKK gearhead, 40 & 80 hp hydraulics, ALLEN BRADLEY PLC, FRANK electrics, WESTINGHOUSE 5 Star MCC w/(26) switches, control cab w/air conditioning, controls
  • SALEM Mk II 72" 5-arm ring debarker, 150 hp DC ring drive, alligator chain in & outfeed, 40' infeed hourglass rollcase, auto oiler, 100 hp MG set, ALLEN BRADLEY PLC controls, electrics
  • ALBANY 20" rosserhead debarker, LINCOLN 150 hp arbor drive, trunnion rolls & carriage, infeed hourglass rollcase, 50 hp gen set(disassembled)
  • 84" insert tooth whole log cutoff saw w/cradle, cylinder, 75 hp/890 rpm, arbor drive, w/spare saws
  • (2) 96" chain type whole log cutoff saws w/cradles & cylinders, 30 hp, w/spare bars & chain
  • 144" chain type whole log splitter saw, 30 hp, carriage mounted, gearhead motor, air hold down, w/spare bar & chain
  • 96" chain type lumber package saw, 15 hp/1160 rpm, frame, w/spare bar & chain
  • RENS 54" whole log metal detector, RADAX A60-54 search coil, LS345 control instrument, 30"x24' pass-thru belt, gearhead, s/n: 020300/101399
  • RENS 32" whole log metal detector, HEX 32 search coil, LS345 control instrument, 16"x16' pass-thru belt, SKK gearhead, s/n: 101086

BANDMILLS, CARRIAGES, RESAWS, EDGERS
  • 1986 SALEM RH 5' Temposonic positioned vertical twin sharp chain bandmill, CM&E 85 Temposonic positioned segmented slabbers w/key knife system,, 1999 INOVEC Setmaster scanning, 150 hp arbor drive on slabbers, centering rolls on sharp chain, air strain, INOVEC 60 hp, SALEM 40 & 25 hp hydraulic units, INOVEC controls, ALLEN BRADLEY PLC, operators booth w/controls, spare saws, s/n: LO222586
  • KLAMATH RH 8' high strain twin column headrig bandmill, 1997 INOVEC Yieldmaster carriage optimizer, StereoScan 3D scanner, GE 300 hp DC drive, INDUSTRIAL ELECTRIC 300 hp Eurotherm DC drive, feed-thru slatbed, 54" oufeed rollcase, spare saws, s/n: 5310
  • 1989 SALEM RH 60" Temposonic positioned 3-knee carriage, airdogs & flippers, (5) trucks, pantograph, rails & bumpers, INOVEC 60 hp hydraulic unit, converted 4-knee carriage, spare knee & hydraulic tensioner, s/n: 138716-89
  • INDUSTRIAL ELECTRIC 5CD224RA922B800 300 hp DC carriage drive, regenerative 1000-2400 rpm, 500 V, 300/150 field volts, FALK 8666341 reducer, fan cooled, hydraulic tensioner, hydraulic unit, 1997 INDUSTRIAL ELECTRIC KDC12-1250-4 solid state starter, spare carriage drives, s/n: 6439-07
  • 1989 SALEM RH 5' Temposonic positioned horizontal band resaw, 35,000 lb air strain, 150 hp arbor drive, hydraulic driven feed-thru rolls, air hold downs, Temposonic positioned linebar, in & outfeed rollcases, INOVEC 10 & 20 hp hydraulic units, spare saws, s/n: R138102-89
  • TURNER 52" vertical band resaw, 60 hp arbor drive, hydraulic feed rolls, linebar, powered infeed rollcase & outfeed rolls, 18' 4-strand H82 outfeed transfer, GE gearhead, s/n: 888
  • 1986 SCHURMAN 12DAG36 12'x36" double splined arbor gang edger, Temposonic positioned CM&E slabbers, INOVEC cant scanning system, 300 hp arbor drive edger, 150 hp drive slabbers, linebar, 25 hp hydraulic unit, SCHURMAN infeed module, auto oiler, lasers, in & outfeed rollcases, cab, controls, spare saws, s/n: 2532
  • UKIAH 8"x54" 6-saw shifting single splined bottom arbor edger, TOSHIBA 400 hp arbor drive, hydraulic driven feed rolls, press rolls, clamshell opening, INOVEC optimization, 75 &150 hp hydraulics, mist system, operators booth, s/n: 8120
  • PORTLAND IRON WORKS 87 8"x103" combination splined top arbor edger, 400 hp arbor drive, DC feed drive, 4-saw setworks, press rolls, in & outfeed rollcases, edge picker, lasers, 50 hp MG set, spare saws, s/n:6788
  • SCHURMAN 18 LH Chipmaster 4"x24" 3-head chipping edger, Temposonic positioned top & RH heads, Temposonic positioned linebar, knurled roll infeed rollcase, canted 12"x26' outfeed belt transfer, 25 hp hydraulic unit, lasers, cab, controls

TRIMMERS, SORTERS
  • IRVINGTON MOORE 66 20' cut, pass 26' individually motorized trimmer, O-saw, 22' 2-section/9-strand lugged feed-thru transfer w/(5) 36" even end rolls, 30"x26' cleanout belt conveyor, SKK gearhead, lasers, drives, spare saws
  • IRVINGTON MOORE 43 20' cut, pass 26' lineshaft trimmer, O-saw, 22' 2-section 7 & 10-strand lugged feed thru transfer, (6) 36" even end rolls, 30"x36' cleanout belt conveyor, SKK gearhead, ALLEN BRADLEY PLC, drives, spare saws, s/n: 19308
  • IRVINGTON MOORE 66 20' cut, pass 26' individually motorized trimmer
  • 1989 IRVINGTON MOORE 20' 28-bin drop sorter, 1"-3" thickness, 4"-12" width, 8'-20' length capacities, DC drive, 26' 9-strand lugged infeed transfer, (5) 12' even end rolls, 120' 4-strand takeaway chains, SKK gearhead, 40' bypass rollcase, SKK gearhead, 20' 4-strand outfeed transfer, SKK gearhead, metal cover
  • 1985 LSI 150' 4-tray sorter, 25' 2-section 7 & 9-strand lugged infeed transfer, (7) 12' even end rolls, BURELBACH auto lumber marker, 20' 4-strand lugged tray feed transfer, DC drive, gravity rolls to trays, roller chain, gearhead on trays, 28' 6-strand transfer to hand pull line, 100' 4-strand pull chain, (3) strands 6' rolltop, (1) H78, 51' 4-strand H78 transfer, (2) 125' 4-strand outfeed transfers, motors, controls, electrics
  • 1990 LUNDEN/USNR 20' automatic stacking & stickering system, LUNDEN auto stick placer, 24' 4-strand infeed transfer, SKK double reduction gearhead, LUNDEN 18' 8-strand lumber unscrambler, 16' 6-strand transfer, (6) 36" even end rolls, 12' 6-strand stacker table, stick placing arms, hydraulic 3-arm lumber lowering hoist, 20 hp 25' 4-strand takeaway transfer, SKK double reduction gearhead, 2-section MCC, TOSVERT G3 transistor inverter, ALLEN BRADLEY PLC, w/40'x60'x20' high metal building, s/n's: 971600, 971700
  • MOORE OREGON HPS20 Hydra-Pac stacker, 20' 2-section infeed transfer, 4-arm lumber placer, 20' 5-arm hydraulic lumber stacking hoist, 25 hp, 20' outfeed rollcase, SKK gearhead, INDUSTRIAL ELECTRIC 2-section MCC w/(8) switches, ALLEN BRADLEY PLC, Quick Panel Jr touch screen, s/n: L69099

GENERATOR
  • 2001 CAT 545 KW gen set, 3412 CAT diesel, EMCP II diagnostic system, distribution panel, LA MARCHE charger, 660 gal fuel tank, w/20' shipping container & trailer, 1624 hrs, s/n: 341P5FL00194

CHIP BINS, CHIPPERS, SCREENS, BLOWERS, FEEDERS
  • PEERLESS 24, 48, 62 unit hydraulic chip bins, 15 hp, w/distribution augers
  • 8'x12'x12' high surge bin, single auger, SKK gearhead
  • KOCKUMS III 66" 8-knife chipper, horizontal infeed, bottom outfeed, starter, TOSHIBA 300 hp/1180 rpm, drive, s/n: 66-184-R
  • NICHOLSON 64" chipper
  • PRECISION PCS77 3-deck chip screen, TOSHIBA drive, s/n: S-623
  • RADER 8X24V-300D high pressure blower, 75 hp drive, silencer, controls, s/n: A96229
  • OREGON 20"x24" chip feeder, w/drive to shaft mounted reducer

COMPRESSORS
  • JOY TWISTAIR TA1200EAA4AH 250 hp rotary screw air compressor, 125 psi, MODINE heat exchanger, s/n: 136664
  • JOY TWISTAIR TA0220EA293JJ 50 hp rotary screw air compressor, 110 psi, air receiver, s/n: 27535
  • QUINCY QNW 1QC-30-D 30 hp rotary screw air compressor, 160 psig, s/n: 880143
  • GARDNER DENVER Electra Screw 100 hp rotary screw air compressor
  • AMERICAN 10 hp tank mounted air compressor
  • CURTISS 15, 10, 5 hp tank mounted air compressors

LUMBER DIP TANK
  • 8'x8'x24' lumber dip tank, hydraulic hoist, 24' powered rollcase, 2-arm clamp, 25 hp hydraulic unit, 24' powered outfeed rollcase, 8'x8'x20' secondary tank, w/pumps, motors, piping, 20'x60'x24' high metal building

PLANERS
  • NEWMAN M990 8"x15" 16-knife, 6-head planer/matcher, 150 hp top head, 75 hp bottom head, 30 hp side heads, 40 hp matcher heads, hydraulic feed rolls, NEWMAN 21' hydraulic single pineapple feed table, (5) 10"x30" rolls, 19' 4-strand H78 infeed transfer, 5' planer bridge, 150 hp hydraulic unit, SQUARE D 4-section MCC w/(24) switches, 20"x30' outfeed belt transfer, SKK gearhead, 4'x8' height adjustable planer slowdown belt, variable speed, s/n: 14147
  • WOODS 415M3 8"x15" 12-knife, 6-head planer/matcher, 100 hp top head, 50 hp bottom head, 30 hp side heads, 40 hp matcher heads, 60 hp gen set & feed drive, WOODS 24' dual pineapple feed table w/(6) 10"x30" rolls, 18' 5-strand H78 infeed transfer, 8' planer bridge, powered rolls, 18"x46' outfeed belt transfer, SKK gearhead, 4'x8' height adjustable planer slowdown belt, variable speed, s/n: 33263

BANDING STATION, PACKAGE SQUEEZE, LUMBER ROLLOUTS, HOISTS
  • Lumber banding station w/hydraulic top & side squeeze, bump gate, 40" in & outfeed rollcases w/(12) 8"x60" rolls, SKK gearheads, 15 hp hydraulic unit
  • Shop built manual lumber package squeeze
  • (17) rail mounted kiln cart frame lumber rollouts, 42"x96" centers
  • 16' 4-arm mechanical lumber hoist, drive, brake, reducer, 50' 4-strand infeed transfer w/drive, 12"x30' sticker belt
  • 16' 4-arm mechanical lumber hoist, drive, brake, reducer, 30' 4-strand infeed transfer w/drive, 12"x30' sticker belt
  • 12' 4-arm mechanical lumber hoist, drive, brake, reducer, 25' 4-strand infeed transfer w/drive, 12"x30' sticker belt
  • 8' 2-arm mechanical lumber hoist, gearhead w/brake, 24' 2-strand infeed transfer w/gearhead

FILING & GRINDING ROOM
  • NEWMAN G280 tub grinder, s/n: 280277ARMSTRONG 3-10 stretcher rollARMSTRONG #3 stretcher rollsARMSTRONG #2 RH sharpenerARMSTRONG #4 RH & LH sharpenersARMSTRONG #6 RH sharpenerIMW 360 grinderbent knife grinderACME circle saw sharpenerHANCHETT DN60 travelling bed grinderVOLLMER Finimat I-800 grinderguide milling machine & jigsdouble arbor setup standanvilsswagesshapersdouble end grinders8' & 12' cutoff saw barsbandmill  resaw bladesedger & trimmer sawsmuch more

KILNS
  • (5) MOORE OREGON 33'x90' aluminum double track steam fired dry kilns, lineshaft fans, controls, electrics
  • (2) WELLONS 33'x60' aluminum double track steam fired dry kilns, lineshaft fans, controls, electrics
  • Assortment of kiln carts, covers, 7500' kiln rail

BOILERS, FUEL SILO
  • INDUSTRIAL BOILER CO BIR4WB800 oil or gas fired water tube type boiler, 15 lbs steam, 27600 steam lb/hr, 800 hp, 33.6 mm btu/hr, CBW supercharger, s/n: R80002
  • KEELER Type CP gas fired water tube boiler, 15 lbs, 350 hp, 25.2 mm btu/hr, controls, electrics, 30'x40'x30' high metal building
  • NORTH AMERICAN 4131B gas fired water tube boiler, 15 lbs steam, 20135 steam lbs/hr, 6.3 mm/btu/hr, 1185 sq ft heating surface, s/n: FK4274
  • WELLONS 160 unit fuel silo, twin auger distribution w/drives, 22' single strand H82 w/flites, outfeed chain conveyor

SCALES, TRAILER LOADERS
  • MURPHY balance beam single axle 25-ton truck scale, s/n: 9064
  • (2) 10,000 lb trailer loaders w/drives, brakes, electrics

ELECTRICAL
  • GE 8000 line 5-section MCC w/(24) switches
  • SQUARE D 4-section MCC w/(24) switches
  • CH UNITROL 4-section MCC w/(14) switches
  • WESTINGHOUSE 2100 5-section MCC w/(22) switches
  • INDUSTRIAL ELECTRIC 2-section MCC w/(10) switches
  • (2) WESTINGHOUSE 5 Star 1-section MCC's w/size 5 starter
  • WESTINGHOUSE 9-section MCC w/(25) switches
  • WESTINGHOUSE 5-section MCC w/(10) switches
  • WESTINGHOUSE 4-section MCC w/(9) switches
  • FURNAS 4-section MCC w/(11) switches
  • (8) sections of DELTA mains w/(2) metering sections, (5) switch sections, (2) 1200 amp, (13) 600 amp, 300 amp, (2) 100 amp switches
  • (2) sections WESTINGHOUSE Pow-r-line switchboard, 2500 amp mains, (2) 1200 amp, (5) 600 amp switches
  • INDUSTRIAL ELECTRIC 300 hp Eurotherm DC driveINDUSTRIAL ELECTRIC 12-1250-4 solid state starter(2) I.E. 400 hp reduced voltage startersGE 400 hp/460v starter(2) I.E. 200 hp startersTOSVERT G3 transistor inverterALLEN BRADLEY PLC'sCUTLER HAMMER 400 & 600 amp double throw switchestransformers to 330 kva(20+) sections DELTA MCC's

CONVEYORS, LOG DECKS, LOG HAULS, LUMBER TRANSFERS, ROLLCASES
  • 1996 WSM FSUB-12 36"x12' vibratory conveyor, s/n: 460596
  • 1985 WSM CSCB-17 36"x17' vibratory conveyor, s/n: PS7785
  • 1988 WSM CSCB-42 24"x42' vibratory conveyor, 9' fines dropout, 5' fiberglass tub, MDI metal detector, s/n: 299488
  • 40' 3-strand H132 infeed log deck, 6-arm log stop & loader, S drive, SKK reducer
  • 40' 2-strand H132 infeed log deck, 3-arm log stop & loader, S drive, SKK reducer
  • 40' 3-strand C150 infeed log deck, 3-arm kicker, S drive, SKK reducer
  • 32' 2-strand H132 log transfer, 3-arm log stop & loader, S drive, motor to reducer
  • 28' 4-arm H132 log transfer, 4-arm log stop & loader, 3 pin stops, S drive, SKK reducer
  • 28' 3-strand H116 log transfer, 4-arm log stop & loader, S drive, GE gearhead
  • 22' 3-strand H132 log transfer, S drive, SKK 20 hp gearhead
  • 12' 3-strand H116 log transfer, 3-arm kicker, S drive SKK gearhead
  • (2) 40' 2-strand H132 log hauls, S drive hydraulic motors
  • 40' 2-strand H132 log haul, S drive, motor to reducer
  • 20' 2-strand H116 log haul, S drive, motor to reducer
  • 40' 4-strand H78 lumber transfer w/lugs, SKK gearhead
  • 36' 5-strand H130 chain lumber transfer, SKK gearhead
  • 22' 4-strand H82 chain lumber transfer, 4-arm log stop & loader, motor to reducer
  • 18' 4-strand H82 chain lumber transfer, SKK gearhead
  • 17' 5-strand H82 chain lumber transfer, SKK gearhead
  • 16' 6-strand H78 chain lumber transfer, SKK gearhead
  • 14' 5-strand H78 & H130 chain lumber transfer, SKK gearhead
  • (2) 12' 6-strand H78 rooftop chain lumber transfers, SKK gearhead
  • 12' 6-strand 81X chain lumber transfer, SKK gearhead
  • 12' 6-strand H78 chain lumber transfer, HITACHI gearhead
  • 12' 5-strand H78 chain lumber transfer, SKK gearhead
  • (2) 10' 6-strand H78 chain lumber transfers, SKK gearhead
  • (2) 8' 5-strand H78 chain lumber transfers, motor to reducer
  • 8' 5-strand H82 chain lumber transfer, motor to reducer
  • 6' 4-strand H130 camel chain lumber transfer, SKK
  • 150', 100' single strand H116 chain conveyors, SKK gearhead
  • 100' single strand H114 chain conveyor, motor to reducer
  • (13) 80'-18' single strand H116 & H110 chain conveyors, SKK, MITSUBISHI, HITACHI gearheads
  • (2) 75' 2-strand H110 chain conveyors, motor to reducer
  • 18"x70' belt transfer, SKK gearhead
  • 18"x60' belt transfer, SKK gearhead
  • 30"x48' belt transfer, motor to reducer
  • 16"x24' belt transfer SKK gearhead
  • 24'x20' belt conveyor, SKK gearhead
  • 30"x6' belt transfer, motor to reducer
  • 60' rollcase w/(18) 10"x36" rolls, 4-strand jump transfer, SKK gearhead
  • 60' rollcase w/(15) 10"x40" 6-arm kicker, 5 & 6-strand jump tansfers, motors
  • 30' hourglass rollcase, (8) rolls, kickers, motor

MACHINE SHOP
  • SAMSON YF-TM2 milling machine, 9"x42"power feed table, s/n: 7912523JET JVM-942F milling machine, 9"x42" table, s/n: 684053MONARCH 20"x96" lathe, 3 & 4-jaw chucks, tool post, steady restORBIT 20" drill pressDAKE 1-1/2 & #4 arbor presses48" hydraulic shop pressCAROLINA HD10 band sawIDEALARC DC250 welderVAN NORMAN 12" rotary table

MILL EQUIPMENT
  • (2) GENCO 300 hp/600 rpm carriage drivesmotors to 400 hpreducersWAGNER 682 moisture meterKARCHER 945/760 & 750 pressure washersWACKER compactorCOATS 1010 tire changerBRANNICK tire spreadertireschainsDELTA shaperRENS PL900 portable metal detectorCAROLINA shop presstransmission & floor jacksKLAMATH 8'x10"x5' log turner12"x8' radial stacker16" log kickerFROSTO tanner tankair receiver tanks1000 & 500 gal oil tanksgravity pumpsyard lightscamerasmonitorsclean up toolshoistshardware itemsbearingshoseconduitfittingssticker & lumber cartsbanding toolscablestartersgeneratorsfilterstruck partsengine blocksbarrel racks & dolliessteel stocklumber bunksAssortment of wood & steel mill buildingsTOO MUCH MORE TO LIST!

ROLLING STOCK
  • 1997 CAT 527 Hi-drive track skidder, 10' 6-way blade, D5H winch, ESCO swing grapple, 6736 hrs, s/n: 4NS00124
  • 2000 CAT 525 skidder, CAT 3304 diesel, 9' 6-way blade, winch, ESCO swing grapple, 3200 hrs, s/n: 1DN02172
  • 1997 CAT 525 skidder, 6100 hrs, s/n: 1DN01016
  • 1997 TIMBCO T445 track mounted hydro buncher, CUMMINS diesel, auto leveler, ULTIMATE 5600 processing head w/touch screen, 7465 hrs, s/n: FT4C-1030-012497
  • PRENTICE 620 track mounted harvester, CUMMINS diesel, auto leveler, QUADCO OFH saw
  • 1995 BLOUNT/HYDRO-AXE 621E, CUMMINS 6BTA 5.9 diesel, rotary axle attachment, 413 hrs, s/n: 5494
  • (3) CAT 980B rubber tire log loaders, 3306 CAT diesel, w/forks & bucket, enclosed cab, s/n's: 89P5006, 89P5041, 89P5211
  • CAT 966C rubber tire log loader, CAT diesel, enclosed cab
  • PIERCE carriage mounted hydraulic log loader, swivel grapple, 50 hp
  • MORBARK 30/36 EZ chipper-recycler, JOHN DEERE diesel, MORLIFT 150 swing grapple, chip harvester, pto, cab w/air conditioning, 1695 hrs, s/n: 874599
  • CHIPMORE TM-160-04 portable chipper, V8 gas, S/A trailer, s/n: 16476-16-221
  • CAT 814B chip dozer, CAT diesel, rollover bucket, straight blade, enclosed cab, s/n: 16Z00116
  • WAGNER CHD17S chip dozer, CUMMINS NTA-855-330 engine, rollover bucket, enclosed cab w/air conditioning
  • RAYGO WAGNER CHD17 chip dozer, DETROIT diesel, 5631-6 trans, rollover bucket, enclosed cab w/air conditioning, s/n: 177303
  • 1985 CAT 225LC excavator, 3208 CAT diesel, long carriage, plumbed for thumb, s/n: 51U06250
  • INTERNATIONAL TD25C crawler tractor, INTERNATIONAL diesel, 12' 6-way U blade, enclosed cab, s/n: 4360064U006939
  • CAT D7 crawler tractor, 12' straight blade, D7D winch, canopy
  • (2) HYSTER H180 18,000 lb dual pneumatic forklifts, PERKINS diesel, Monotrol, 2-stage mast, sideshift
  • TAYLORTE-155 15,500 lb dual pneumatic forklift, CUMMINS diesel, 189" 2-stage mast, sideshift, s/n: S-35-21624
  • TOYOTA 02-6FOU45, 52-6FGU45 10,000 lb dual pneumatic forklifts, gas, 179" 2-stage mast, s/n's: 60331, 60231
  • HYSTER S70XL 7000 lb HRT forklift, propane, 145" 2-stage mast, sideshift, s/n: D004V0348L
  • HYSTER S60XM 6000 lb HRT forklift, propane, 181" 2-stage mast, sideshift, s/n: D87V063380
  • (2) HYSTER 60XL 6000 lb HRT forklifts, propane, 2-stage mast, s/n: A187V020098
  • HYSTER H50XM 5000 lb HRT forklift, propane, 189" 2-stage mast, sideshift, s/n: D177802888P
  • CLARK C600Y 4500 lb HRT forklift, gas, 152" 2-stage mast, sideshift, s/n: Y355-131-2588
  • 1997 INTERNATIONAL 9100 Eagle C/O T/A tractor, CUMMINS M-11 diesel, Super 10 trans
  • (2) 1996 FREIGHTLINER FLD120 T/A tractors, CUMMINS N-14 diesel, 10 spd trans
  • (4) 1995 PETERBILT 378 T/A tractors, CUMMINS N-14 diesel, 10 spd trans
  • 1994 PETERBILT 379 T/A tractor, CAT 3406 diesel, Super 10 trans
  • (2) 1992 PETERBILT 378 T/A tractors, DETROIT Series 60 diesel, 13 spd trans
  • 1989 PETERBILT 378 T/A tractor, CAT 3406 diesel, 13 spd trans
  • 1989 FREIGHTLINER C/O T/A tractor, CUMMINS 400 diesel, 9 spd trans
  • (2) 1987 PETERBILT 359 T/A tractors, CAT 3406 diesel, 13 spd trans
  • 1986 PETERBILT 379 T/A tractor, CAT 3406 diesel, 6/4 trans
  • 1985, 1984, 1983 KENWORTH W900B T/A tractors, CUMMINS 400 diesel, 13 spd trans
  • 1984 PETERBILT 379 T/A tractor, CAT 3406 diesel, 13 spd trans
  • 1981 PETERBILT 379 T/A tractor, CAT 3406 diesel, 12613 trans
  • 1977 KENWORTH W900 T/A tractor, CUMMINS Big Cam diesel, 6/4 trans
  • 1974 PETERBILT 379 T/A tractor, CUMMINS NTA 370 diesel, 6/4 trans
  • 1964 PETERBILT T/A water truck, CUMMINS NTC350 diesel, 5/4 trans, 3000 gal tank, front & rear spray bars
  • 1959 PETERBILT T/A water truck, DETROIT diesel, 5/4 trans, 2000 gal tank, front & rear spray bars
  • AUTOCAR T/A dump truck, CUMMINS NH250 diesel, 5/4 trans
  • PETERBILT T/A dump truck, DETROIT diesel, 5/4 trans
  • 1949 CHEV dump truck, gas, 4 spd
  • 1994 FORD F-150XL pickup, V8, auto
  • 1990 CHEV 4x4 pickup, V8, auto
  • 1989 NISSAN pickup, 4 cyl, 4 spd
  • 1989 FORD Taurus, station wagon, V8, auto
  • (2) CHEV flatbed shop trucks, gas, w/LINCOLN SA 200 & MULTIQUIP 220 welders
  • (2) 1996 RELIANCE 24' S/A trailers
  • (2) 1996 RELIANCE 24' truck flatbeds
  • 1996 RELIANCE 24' short log trailer w/bunks
  • 5th wheel dolly
  • BEALL 40' T/A drop deck trailer, 40 ton capacity
  • FRUEHAUF 40' T/A van/jobsite trailer
  • FRUEHAUF 40' T/A chip trailer
  • EIGHT POINT TRAILER EPFT18 single axle fuel trailer w/3000 gal aluminum tank

TERMS & CONDITIONS
  • 8% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Friday, January 30.
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #48
  • CA Bond #445652C

DRIVER DIRECTIONS
    From I-5 in Sacramento, Drive east on Hwy 50 approximately 30 miles to Latrobe Road(exit #30A). Drive south on Latrobe Road approximately 3.1 miles to Wetsell-Oviatt Road. Turn right on Wetsell-Oviatt Road and drive approximately 1 mile to the auction site.


WATCH FOR AUCTION SIGNS
LODGING
    HAMPTON INN, Rancho Cordova  916-638-4800
    BEST WESTERN, Rancho Cordova  916-635-4040
    INNS OF AMERICA, Rancho Cordova  916-351-1213
    HOLIDAY INN, Rancho Cordova  916-638-1111

AIRPORTS & CAR RENTAL
  • Sacramento Airport is served by most major airlines and car rental agencies.

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide