Day 1 Advance Bid Auction Catalog

Day 2 Advance Bid Auction Catalog

X Lot Advance Bid Auction Catalog

Complete PDF Catalog (includes ALL lots)

Please Note: there will be a limited number of catalogs available at the auction site. Feel free to print the PDF catalog to ensure you have one for the auction.

• CAMBIO 40", 5-arm ring debarker, 75 hp ring drive, air bag conversion, in & outfeed log centering spiked feed rolls, controls, electrics, booth
• 84" swing arm hydraulic insert tooth log cutoff circular saw, 75 hp, w/log clamps

• COE 277 8' veneer lathe, s/n: 60294, w/retractable chucks to 2-5/8", COE 3-1/2" dia dual backup roll, 2-3/4" nose bar, RELIANCE 300 hp/1150-2000 rpm/500v DC drive, COE x-y pendulum charger, LDS5560 laser scanning, hydraulic support, controls, electrics
• Lathe infeed: 40', 2-strand H132 transfer, 4-step feeder
• Lathe outfeed: 90', 3-deck veneer tray system, RELIANCE 50 hp DC drives, electrics
• 1987 DURAND RAUTE rotary veneer clipper, 10' knife, hydraulic feed rolls, strip belt w/DC drive, electrics, VENTEK clip setting scanner
• 1987 DURAND RAUTE 5-bin green veneer stacker w/tipple strip belt infeed, vacuum blower, (5) bins, (3) w/53" wide scissor lifts, (2) 27" wide scissorlifts, scissorlift outfeed gravity rollcases, 40', 3-strand 81X outfeed transfer, DURAND RAUTE RMS 6808 moisture processor, DURAND RAUTE KOC 6808 stacker control
• 90', 3-deck tray w/4" belts
• 120' hand pull transfer w/4" belts
• 90' & 150' trash decks
• more

• RAUTE 4' veneer lathe, retractable spindles to 2-1/2", RELIANCE DC drive, hydraulic support unit, charger, lathe infeed w/8'x12' & 4'x12' step feeders, lathe outfeed w/70', 2-deck veneer tray system, DC drives, 30' trash deck
• DURAND RAUTE 5-bin green veneer vacuum stacker w/(2) 50" wide scissorlifts, (3) 30" wide scissorlifts, (5) stacker outfeed gravity rollcases, 2-strand outfeed transfer, hydraulic support unit, electrics

• WILLIAMS & WHITE 40-opening steam heated plywood hot press, 572 ton, 54"x106", w/AMERICAN 40-opening charger, unloader, hydraulics, controls, electrics, s/n: C4424
• FJELLAN 836 30-opening steam heated plywood hot press, 54"x106", w/AMERICAN 30-opening charger, unloader, hydraulics, controls, electrics
• (3) GLOBE 20E 52" glue spreaders
• Glue loft w/5' dia x 8' mixer, 125 hp
• 3-1/2' dia x 4' twin drive mixer
• 7500 to 10,000 gal caustic & resin tanks w/diaphragm pumps
• scissorlifts
• 81X chain transfers on press lines
• more

• MOORE 23-section(20 dry/3 cooling), MOORE 16-section(14 dry/2 cooling) steam heated 6-tray veneer dryers w/(4) 100 hp circulation, (1) 60 hp exhaust fans, hydraulic tray drives, hydraulic support units, SWEED Accu-Matic vacuum veneer feeders, 6-tray dryer loaders, 16', 3-strand elevating infeed systems, 2000 RAUTE WOOD 6-tray dryer unloader, strip belt veneer land tables
• ELLIOT BAY, WARD MOISTURE LOGIC 220 moisture detection systems
• 1999 MECANO VDA dual cam veneer scanning grade reader, s/n: 018/995, w/RAUTE WOOD controller, s/n: 5187, feed thru suction strip belt transfer, NYB suction blower
• 1988 DURAND RAUTE 10-bin side in/end out dry veneer stacker, w/infeed overhead strip belt transfer, (5) vacuum blowers, (10) hydraulic scissorlifts, (10) 59"x11' stacker outfeed gravity rollcases, 75', 3-strand 81X system outfeed transfer, hydraulic support unit, DURAND RAUTE KOC6808 stacker controller, ALLEN BRADLEY PLC
• 1993 GEOENERGY 36000 ACFM wet type, E-tube electrostatic precipitator, full wave rectifier, KRAFT TR controls, electrics

• 12', 3-strand 81X infeed w/3-arm tilt package breakdown hoist
• 1995 DURAND RAUTE veneer composer w/107-1/2" in & outfeed veneer cutting knives, (6) string applicators, DYNATEC adhesive system, 1998 OGDEN controller, DURAND RAUTE VCP6808 composer controller, ALLEN BRADLEY PLC 5/20 programmer, ALLEN BRADLEY panel view
• 1995 DURAND RATUE vacuum type stacker, 8'x9' hydraulic lifting veneer stacking rollcase, outfeed gravity rollcase
• 35' veneer trash deck
• 25 hp composer line hydraulic support unit

• 8' power infeed rollcase w/DURAND RAUTE 4'x8' vacuum feeder, scissorlift, 13' canted roll sander infeed rollcase, hydraulic drive, COE 4-head top & bottom sander, 125, 75 hp top, 125, 75 hp bottom drives, 50" belts, TRIENCO 506 quality scanner, GRE CON 2-sensor/2-sprayer spark extinguishing system , 6', 2-strand 4" belt & 5' rollcase outfeeds w/paddle wheel turner, BUREBACH 4-bin, 4'x8' side in/end out panel stacker w/20' outfeed rollcases, 30' H78 outfeed, ALLEN BRADLEY Mini PLC 2/17
• 12', 3-strand 81X infeed w/scissorlift, 4'x8' vacuum panel feeder, TIMESAVER TCP52VH belt sander, 50" belt, 100 hp drive, 15 hp feed roll drive, s/n: 30-60, 10', 2-strand 4" belt sander outfeed, KIMWOOD 2-bin 4'x8' end in/side out panel stacker, CUTLER HAMMER D100 PLC

• SKOOG 1201 veneer patcher w/tape applicator, DYNAPLY 21 adhesive applicator, strip feeder, work table scissorlifts, s/n: 54179
• (3) RAIMANN ASA1650 veneer patchers w/tape applicator, DYNAPLY 21 adhesive applicator, strip feeder, work table scissorlifts
• (2) hand patch lines w/12', 3-strand 81X infeed, scissorlift, mechanical & vacuum panel feeders, 60', 2-strand 4" belt hand patch lines, 4'x8' panel stacker w/scissorlift, 12', 3-strand 81X outfeed, CUTLER HAMMER D100A PLC's

• 15' rollcase infeed w/scissorlift, DURAND RAUTE 4'x8' vacuum feeder, s/n: 88-5127, 8' canted roll saw infeed, JENKINS 192 panel side trim skinner saw, (2) 20 hp/3460 rpm arbor motors, hydraulic feed thru chain drive, 15', 2-strand 4" belt outfeed w/TRIENCO 506 quality scanner, JENKINS 192 panel end trim skinner saw w/(2) 20 hp/2460 rpm arbor motors, hydraulic feed thru chain drive, 15', 2-strand 4" belt outfeed, paddle wheel panel turner, grade imprinter, SWEED 5-bin, 4'x8' side in/end out panel stacker w/(5) scissorlifts, gravity roll outfeeds, 40', 2-strand 81X outfeed transfer, hydraulic support unit, ALLEN BRADLEY Mini PLC 2/17
• 4'x8' vacuum panel feeder w/scissorlift, infeed gravity roll, 20' infeed rollcase, adjustable fence, GLOBE tongue & groove saw w/left & right hand 15 hp arbor motors, 4'x8' panel stacker w/scissorlift, gravity roll outfeed, CUTLER HAMMER D100A PLC
• 4'x8' mechanical panel feeder w/scissorlift, infeed gravity rolls, 4' wide panel coater w/(8)spray heads, 4'x8' mechanical panel stacker w/scissorlift, chain outfeed transfer, ALLEN BRADLEY SLC 5/03 CPU
• SWEED CCS150-88 veneer core saw, 50 hp, 84" insert tooth circular core saw, 14', 3-strand H78 feed thru transfer, end evening fence, s/n: 6112
• (2) 4' pneumatic load turners

• 12', 2-strand 81X infeed, SIGNODE M22LP-44 compression strapping machine w/1/2" auto strapping head, edge protector applicators, hydraulic support unit, 12', 2-strand 81X outfeed, 14', 2-strand outfeed gravity rolls, TRADEMARK paint station, s/n: 1049

• MONTGOMERY 36" drop feed, bottom discharge hammer hog, 150 hp
• (2) SUMNER 76", 4-knife horizontal feed, bottom discharge chippers, ACROWOOD feed rolls, 125 hp
• BLACK CLAWSON 54" 6-knife drop feed, bottom discharge chipper, TOSHIBA 200 hp
• NICHOLSON 30"x36" tilt roto drum horizontal feed, bottom discharge lily pad chipper w/drive
• PENINSULA 30" horizontal feed, bottom discharge V-knife veneer hog, w/feed roll, 50 hp
• PENINSULA 18" horizontal feed, bottom discharge V-knife veneer hog, w/feed roll, 30 hp
• CLARK 40-20 dust collection baghouse w/60", 60 hp & 20" 10 hp blowers
• CLARK 20-62 dust collection baghouse w/60", 200 hp blower
• (4) surge bins w/auger cleanout
• 14 unit hydraulic chip bin
• 8'x10' 3-deck chip shaker screen
• RADER 20x20, PRECISION 25x30, ARCHER 22x26, 18x18 chip & dust feeders
• (2) ARCHER 10x30, 100 hp, 15x30, 7x18 high pressure rotary lobe blowers
• (3) dust collection cyclones, 60" blowers
• Large quantity assorted high & low pressure blowpipe, steam pipe

• SIDNEY 27"x13' CC QCGH engine lathe w/taper attachment, s/n: 7496
• LODGE & SHIPLEY BUTLER 460 15"x8' CC CQGH engine lathe w/taper attachment, s/n: 27247-365
• CLAUSING COLCHESTER 17"x7' CC QCGH engine lathe w/taper attachment, s/n: 7/0017/07843
• HERCULES AJAX 24"x6-1/2' CC QCGH gap bed lathe w/taper attachment, s/n: 9496
• COLCHESTER Mark II 12"x20" CC QCGH engine lathe, s/n: F2/67144
• LAGUN vertical milling machine w/universal head, power feed table
• FOSDICK radial arm drill, 15" column, 5-1/2' arm
• MITTS & MERRILL 3HYD.KS keyseater, s/n: KM742
• GRAY planer, 8' table, tilt head, 2 hp
• DO ALL Metal Master band saw w/15" throat, blade welder
• GOULD & EBERHARDT 32" universal shaper
• DAKE 75 ton air/hydraulic shop press
• ENERPAC 50 ton hydraulic shop press
• CALDWELL horizontal wheel press
• KALAMAZOO horizontal band saw
• OMW SC42 pattern cutter
• NIAGARA 5F 5'x16 ga stomp shear
• 5'x16 ga initial plate rolls
• 51" pyramid plate rolls
• 5'x16 ga bending brake
• BELMONT steam forging press
• FIE #4 hardness tester
• OSTER Rapiduction 2" threader
• Abrasive cutoff saw
• G&P RG490-15 4" belt sander
• L&W indexing head
• LINCOLN WP250G9P gas welder/generator
• (2) LINCOLN ShieldArc SA 200 gas welders
• (2) MILLER CP300 welding power supplies w/wire feeders
• HOBART RCC-610 600 amp welding power supply w/wire feeder
• LINCOLN Idealarc CP300 welding power supply w/wire feeder
• LINCOLN R3R 300 welding power supply
• Assortment of welding positioners, welding rod & wire, torpedo welders, oxy acetylene carts, double end grinders, vises, steel tables, drill bits, reamers, milling cutters, lathe tooling, C-clamps, chain hoists, jib booms, monorail system, anvil; PLUS: structural steel, plate, shafting, rail, much more

• (2) QUINCY QNW 1000E 250 hp rotary screw air compressors, s/n's: 940593, 90082
• ALLEN BRADLEY 11-section/41 station MCC
• (2) ALLEN BRADLEY 4-section/14-station MCC's
• WESTINGHOUSE 2100 series 4-section/16-station, 3-section/18-station, 3-section/15-station, 2-section/13 station MCC's
• ALLEN BRADLEY 1336
• (5) ALLEN BRADLEY 20 hp, (3) WESTINGHOUSE 3 hp adjustable frequency AC motor controllers
• (4) ALLEN BRADLEY SMC Plus 100 hp, (2) 60 hp starters
• Assortment of stand alone electrical boxes, electrical parts room with supplies
• more
• REFORM AR31 Type 6 travelling head straight knife grinder, 10' magnetic chuck, s/n: 246682
• 1998 OLYMPIAN D30PI 37-1/2 kva/30 kw/208/120v 3 phase diesel generator, 22 hrs
• 3-station rail car chip loading facility w/winches, controls
• GREENLEE 4" hydraulic bender w/table, GREENLEE cable puller
• WEATHERHEAD T40L crimping machine
• TUXCO hydraulic cylinder servicer
• RIDGID 535, 200 pipe threaders
• Assortment of log decks, log hauls, chain & belt conveyors, transfer systems, scissorlifts, (200+) spare motors & gearheads, DEWALT 12" radial arm saw, BLACK & DECKER panel saw, POWERMATIC table saw, tank mounted compressors, air receiver tank; PLUS: bearings, taper locks, mill chain, valve grinding equipment, pipe & hydraulic fittings, hydraulic & diaphragm pumps, babbit pot, parts washers, shelving, veneer carts, fire extinguishers, much more

• CAT D-8L high track crawler tractor, chip U-blade, enclosed cab, MEDFORD ROPS, s/n: 53Y02067
• CAT D-8H crawler tractor, U-blade, enclosed cab, ROPS, s/n: 46A26861
• CAT 235 hydraulic excavator, 30" bucket, thumb, expandable tracks, w/spare boom, log grapple, s/n: 32K1138
• WAGNER L-90 log stacker w/log forks, s/n: 039227
• JOHN DEERE 544B articulated front end loader w/GP bucket
• CAT 950B articulated front end loader w/log forks, s/n: 81J14335
• INT'L 270A loader backhoe, diesel, EROPS, s/n: 37681
• CAT 14A grader, 14' hydraulic mold board, 10' hydraulic push blade, ripper, s/n: 2K1197
• HYSTER S80XLBCS 8000 lb HRT forklift, propane, 145", 2-stage mast, sideshift, monotrol, s/n: D004VO3324K
• (6) HYSTER H70XL 7000 lb forklifts, (5) w/cushion, (1) w/hard rubber tires, propane, 145", 2-stage mast, monotrol, s/n's: F005DO5728N, F005DO3758L, F005DO3618H, F005AO3619H, F005AO3617H, F005AO1072G
• HYSTER S70EBCS 7000 lb HRT forklift, propane, 145", 2-stage mast, sideshift, monotrol, s/n: C004DO8927G
• CAT T70D 7000 lb HRT forklift, propane, sideshift, monotrol, s/n: 450866
• HYSTER H50XL 5000 lb cushion tire forklift, propane, 187", 3-stage mast, sideshift, monotrol, s/n: C177BO2160L
• CAT V50G 5000 lb pneumatic forklift, propane, sideshift, monotrol, s/n: 428673
• (2) BOBCAT M610 skid steer loaders, GP bucket, gas
• 1980 KENWORTH T/A dump truck
• 1979 FORD single axle dump truck, 370 gas, 5/2
• FORD F750 16' van truck, w/tank, pumps, compressor
• FORD 700 16' flatbed, 370 gas, 5/2
• 1983 FORD Bronco 4x4
• 1990 FORD Taurus
• (8) FORD mill site pickups
• Huge assortment of rolling stock repair parts and equipment, CLAYTON dynamometer, 750 gal fuel tank, AUTOQUIP VR-FT-200C 20,000 lb free standing floor jack, much more

• UNITEC 10'x85' above ground load cell truck scale, 120,000 lb capacity

• New 1995 complete 80,000 lb/hr wood fueled boiler plant:
• ZURN 80,000 lb/hr wood fueled boiler, 350 psi operating pressure, travel grates, steam & electric turbine feed water pumps, PPC 3-cell electrostatic precipitator w/continuous opacity monitoring, water treatment system, tanks, pumps, controls, electrics, bolt together building
• NEBRASKA 75,000 lb/hr natural gas or oil fired package boiler, 250 psi operating pressure
• For additional information contact: Andy Taylor, James G. Murphy Company, 503-463-4444, or Rich Thompson, Stimson Lumber, 406-293-0603

• 7% BUYERS PREMIUM
• PAYMENT: Full payment must be made by no later than 4pm, Friday, June 13.
• A 25% deposit is required by the close of business, auction day.
• Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
• Absentee bids accepted with 25% deposit
• REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
• Announcements made by the auctioneer at the time of sale take precedence over printed matter.
• Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  
  
• Due to safety & insurance reasons, persons under 12 not admitted.
• Washington Auctioneers License #48

• The auction site is located on Hwy 2, just on the eastern outskirts of Libby
  
  WATCH FOR AUCTION SIGNS

VENTURE MOTOR INN		406-293-7711
SUPER 8		406-293-2771
SANDMAN MOTEL		406-293-8831
MOUNTAIN MAGIC MOTEL		406-293-7795



FOOD SERVICE AVAILABLE AT THE AUCTION SITE.