2005 Past Auction: 2005 Past Auction: Siskiyou Forest Products auction, April 5, 2005

Click small pics to enlarge

10AM - TUESDAY - APRIL 5
Preview 10am to 4pm, Monday, April 4
Anderson, CA

Past Auction held in 2005

Display Catalog
Downloadable PDF Catalog
Advance Bid Center

DEBARKER

SALEM 60" 5-arm ring debarker w/auto-manual self centering ring, 75 hp DC ring drive, 1993 I.E.S./SAFTRONICS, KDC-12-350-4 drive, DC feed drive, FALK 56 rpm reducer, 1990 I.E.S./SAFTRONICS KDC-12-175 Type S regenerative type drive on in and outfeed, air hold down rolls & gates, 40 hp hydraulic unit, 73' twin strand H132, lug infeed loghaul, motor to reducer, 8' hourglass outfeed rollcase

WHOLE LOG CUTOFF SAW

L&M bar type cutoff saw, TOSHIBA 15 hp, accumulator, log kicker, cylinder

HEAD RIG BANDMILL, SLABBER

KLAMATH 7' RH headrig bandmill, single cut, GE 250 hp/575 rpm/440v, 1-1/2" on top wheel, mechanical strain, feed thru slat chain, SKK gearhead, cab, controls, spare saws
CM&E 64RH 6-knife slabber, 200 hp, w/IESCO 200 hp SS RVS, 30" chipping face dia, 6" depth of cut, s/n: S-254

CARRIAGE, DRIVE, SCANNER, LOG TURNER, LS&L

KLAMATH 54RHTD-H 16'x54" 3-knee log carriage, 3" minimum backstand, 56" max opening, air positioned knees, flippers, dogs, tons, (5) trucks, pantograph, rail bumpers, 40 hp hydraulic unit, cab, controls, spare saws
GENCO carriage drive, GENCO/GE 250 hp/710 rpm/150-440v, GENCO/GE 250 hp automatic reduced voltage starter, carriage spool assembly
1994 INOVEC Yieldmaster 386 headrig carriage control system, 40 top scanning eyes, bottom curtain, controls, cab
1992 4-knee hydraulic operated log turner w/HILL TURNER 60 hp hydraulic unit

RESAW

1989 KOCKUMS CANCAR HOF RH 6' horizontal band resaw, 36,000 lb fluid strain, BROCK 200 hp/1170 rpm, IESCO 200 hp reduced voltage starter, 8'-20' cant length x 30" w x 30" tall, 27" throat over saw, 100-300 fpm, 9700 fpm saw speed, 20' powered in & outfeed rollcases, (3) 9"x30" smooth rolls & (3) 9"x30" knurled rolls, knurled feed thru rolls, air hold down rolls, cab, controls, spare saws, s/n: 8933-0176

EDGER

SCHURMAN 85BA54 single bottom splined arbor gang edger, TOSHIBA 350 hp/1175 rpm arbor drive, TOSHIBA 30 hp/1760 rpm, TOSHIBA 30 hp/1175 rpm feed drives, (3) saw shifting setowrks, 20' shifting infeed rollcase, (5) 8"x52" knurled rolls, 10' 8-strand crossover transfer, 4-arm lumber stop, 20' outfeed rollcase, (7) 7"x66" rolls, 12' 8-strand jump transfer, drives, (3) LAHARCO lasers, AB PLC 2/05, SQUARE D 400 hp starter, PFS 80 hp hydraulic unit, spare saws, s/n: 2493

TRIMMER

IRVINGTON MOORE 66 individually motorized trimmer, cut 16', pass 24' x 6" thick, air lift saws, zero saw, 36' 3-section lugged feed thru transfer, (6) 9"x30" infeed even end rolls, (10) 9"x108" outfeed even end rolls, clean out conveyor, drives, AB PLC, controls,electrics, spare saws, s/n: 1856L

KILNS(*kilns sold subject to confirmation)

(4) 1985 COE 34' x 120' x 20' H oversized double track steam fired dry kilns, (3) zones per kiln, line shaft driven, w/front & backside RELIANCE 60 hp/1760 rpm, COE recorders, valves, CUTLER HAMMER EATON electrics, 10'x136' kiln control house, w/associated piping, valves, catwalks, stairs
(2) MOORE 34'x120'x20' H oversized double track steam fired dry kilns, (3) zones per kiln, individually motorized fans, 7.5 hp/1750 rpm, MOORE recorders, valves, controls, 10'x15' control house, associated piping, valves, catwalk. Note: kiln 7 sold minus common wall w/kiln 6

HOG

WILLIAMS 460 Series5 No Nife hammer hog, WESTINGHOUSE 500 hp/855 rpm/460v, flywheel brake, FALK coupler, 96 lb hammers, GENCO 500 hp starter, drop feed chute, s/n: 11522, w/30"x140' infeed belt conveyor, EURODRIVE gearhead, 17' 2-strand box chain cutoff conveyor, SKK gearhead

CHIPPER, CHIP SCREEN, SURGE BIN

WEST SALEM 66" 8-knife chipper, 250 hp/600 rpm, I.E.S. reduced voltage starter, horizontal infeed, bottom discharge
PRECISION PCS6-8 6'x8' 2-deck chip screen
9'x10'x10' high surge bin w/twin bottom augers, drive, RADICON reducer

VIBRATORY CONVEYOR

WEBSTER FSM 24"x33" vibratory conveyor, 5' fiberglass tub, 9/16" stroke, RENS metal detector, s/n: 352/5322/1

COMPRESSORS

QNW 950C 250 hp rotary screw air compressor, 200 psi, 21300 hrs, s/n: 740353
QNW 850A 200 hp rotary screw air compressor, 200 psi, s/n: 980933
KEL AIR D16A compressed air dryer, 100 scfm @ 100 psig, 150 psi max, s/n: 980933

FILING & GRINDING EQUIPMENT

ARMSTRONG 4RH sharpener, s/n: 6302
ARMSTRONG 6RH sharpener, s/n: 4871
CM&E 41 bent knife grinder, s/n: 50
HANCHETT DN40 traveling bed knife grinder, s/n: 93571
IMW type guide milling machine
Stretcher roll
HOE guide grinder
ACME circle saw sharpener
Chain saw sharpener

MILLWORK EQUIPMENT

INDUSTRIAL FJS25 finger jointer w/3550 assembly, feed conveyor, FJS25 RH & LH dual finger jointer shapers, cutoff saw section, glue assembly section 30' payout table, ZIEGELMEYER chain conversion, hydraulics, electrics
INDUSTRIAL FJA 200, cutoff saw section, 20' press assembly
BREWCO BSBHS 36" horizontal single band resaw line, LINCOLN 20 hp, 20' 2-strand feed thru belt, s/n: SBIA4318
MANN RUSSEL 6' continuous glue line w/MANN RUSSEL 700 46 kva generator, s/n: 70562, w/6' applicator assembly, 13.56 khz, s/n: 94496, flying cutoff saw assembly
RAMCO 25-B-2 24" belt sander line, 40 hp, 25 hp top heads, air tracking, 40 hp, 25 hp bottom heads, s/n: 1720, 1721
CHASE INDUSTRIES shrink wrap tunnel w/in & outfeed belts, 220v, single phase, s/n: l0133
INFRA PAK HP Hawk spiral shrink wrap machine, 60" travel, 90" turntable w/chains, flippers, s/n: 904998
TURNER 60" horizontal band resaw
MONTGOMERY mini hog, 30 hp, w/WEBSTER 10"x24' vibratory conveyor
ONSRUD WA-50A shaper, w/ARO B1-25-4 auto drill, 7500-10,000 prm shaper head, 40" T-slot table, s/n: 7912
BLACK BROS 220-500 20" single bottom glue roll, s/n: 181758
WOODS 415M 6"x15" planer w/top & bottom heads
Assortment of mill equipment including: AMERICAN FINISHING SYSTEMS paint line, conveying equipment, paddle wheel, material conveyors, pumps, 25 hp hydraulic log loader w/swivel clamshell, IR T-30 5 hp air compressor, air receivers, chain hoists, motors, reducers, chain electrics, babbit pot, anvils, edger guides, spare saws, and much more

ELECTRICAL

GE AV Line 2000 amp switchboard w/GE 2000 amp adjustable trip breaker
GE 3000 amp main w/GE 2-section MCC, (16) switches
WESTERN POWER main w/3000 amp-600 amp breaker
GE 8000 line 1-section MCC w/(6) switches
GE 6-section MCC w/(22) switches
Assortment of starters, breakers, disconnects

TRANSFERS, CONVEYORS, ROLLCASES

40' 4-strand H132 infeed log deck w/drive
32' 3-strand H82 lumber transfer w/gearhead drive
(2) 17' 4-strand H124 infeed log transfers w/SKK gearhead
45' 4-strand H78 infeed lumber transfer w/SKK gearhead
12' 5-strand H78 infeed lumber transfer w/HITACHI gearhead
10' 5-strand H78 infeed lumber transfer w/SKK gearhead
24' 5-strand H78 infeed lumber transfer wHITACHI gearhead
17' 5-strand H78 infeed lumber transfer w/HITACHI gearhead
18' 7-strand H78 infeed lumber transfer w/gearhead
22' 3-strand H78 infeed lumber transfer w/gearhead
15' 6-strand H78 infeed lumber transfer w/gearhead
19' 2-strand H128 chain conveyor w/3-arm log kicker, gearhead
37' H78 chain conveyor w/flites, gearhead
40' H78 chain conveyor w/flites, gearhead
42' H78 chain conveyor w/flites, gearhead
19' H78 chain conveyor w/flites, gearhead
62' H78 chain conveyor w/flites, gearhead
42' H110 chain conveyor, SKK gearhead
120' long link chain conveyor w/flites, SKK gearhead
60' H110 chain conveyor w/GE gearhead
41' H110 chain conveyor w/flites, GE gearhead
45' H112 chain conveyor w/flites, SKK gearhead
(2) 20' H78 chain conveyor w/flites,SKK gearhead
100' H78 chain conveyor w/flites, SKK gearhead
20"x140' belt conveyor w/sweeper, (2) SKK gearheads
12'x140' belt conveyor w/SKK gearhead
20"x28' belt conveyor w/gearhead
60' powered rollcase w/(5) 9"x48", (8) 9"x60" rolls
60" powered rollcase w/(14) 13"x48" rolls, SKK gearhead

ROLLING STOCK

CAT 966E rubber tire log loader, CAT diesel, BALDERSON log forks, enclosed cab, s/n: 99Y07077, 18771 hrs

TERMS & CONDITIONS

7% BUYERS PREMIUM
PAYMENT: Full payment must be made by no later than 4pm, Wednesday, April 6.
A 25% deposit is required by the close of business, auction day.
Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
Due to safety & insurance reasons, persons under 12 not admitted.
Washington Auctioneers License #48
CA Bond #445652C

DRIVER DIRECTIONS

From north or southbound I-5, take the Riverside Avenue exit(#670).
Drive west on Riverside Ave approximately 4/10 mile to Ox Yoke Road.
Continue west on Ox Yoke Road and drive 3/10 mile to to Hwy 273.
Turn right and drive north on Hwy 273 approximately 7/10 mile to the auction site.

WATCH FOR AUCTION SIGNS

LODGING

HOLIDAY INN		1-800-465-4329
RED LION		1 800-733-5466
LA QUINTA		1 800-531-5900
AMERIHOST INN		1 800-434-5800

AIRPORTS & CAR RENTAL

Redding Airport is served by United Airlines, Horizon Airlines and most rental car agencies

James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554