James G. Murphy Co.





Back to Top
Auction Schedule Company Overview Advance Bid
Sedro-Woolley Forest Products

9AM - FRIDAY - NOVEMBER 12
Preview 10-4, Thursday, November 11 or by appointment
109 Jameson, Sedro-Woolley, WA

Auction Catalogue (477 kb)

Auction Catalog X Items


Past Auction - held in 1999

SEDRO-WOOLLEY LUMBER - SAWMILL
  • SALEM 27" 5-arm ring debarker, 75 hp ring drive, 30 hp/45 rpm feed drives, hydraulic hold downs, hydraulic unit, s/n: 780250
  • SALEM 50" 5-arm ring debarker, 75 hp ring drive, powered in & outfeed rolls, hold downs,
  • SAFTRONICS 30 hp DC drive, controls, electrics
  • BARKO 160BSE pedestal mount hydraulic log loader, 360o grapple, hydraulic unit, controls, electrics, s/n: 18952
  • 48" circular log cutoff saw, log cradles, 50 hp drive, controls, electrics
  • 72" bar type log cutoff saw, 25 hp
  • KOCKUMS 60" twin band vertical resaw, Temposonics on both sides, air strain, 11' fixed infeed linebar w/hydraulic powered rolls, 3' fixed outfeed linebar w/hydraulic powered rolls, (2) 125 hp drives, hydraulic unit, (2) GE 150 hp starters, safe stop brake
  • KOCKUMS 60" horizontal resaw, Temposonics, air strain, hydraulic powered in & outfeed rollcases. 200 hp drive, SAS positioning, controls
  • CANCAR Chip-N-Saw, top & bottom heads, 75 hp drive, hold downs, alligator chain infeed, 75 hp gearhead motor, outfeed rolls w/75 hp gearhead motor, hydraulic unit, SAS positioning, controls, s/n: 16968
  • SALEM 8' RH slanted bandmill, air strain, feed thru slat chain, 250 hp drive, SAFTRONICS solid state starter, controls, electrics
  • FILER & STOWELL 48" 8-knife slabber, INOVEC positioning, 250 hp driv
  • SALEM 42" slanted carriage, 4-knee w/INOVEC positioning, air dogs, pantograph, rail, bumpers, 30 hp hydraulic unit, INOVEC Easalign scanner w/(40) eyes
  • TYRONE BERRY SMA 385C hydraulic carriage drive unit, 300 hp, s/n: A2703
  • UKIAH SDAG 12"x66" edger, (4) 200 hp arbor drive motors, saw mist system, hydraulic hold downs, clamshell opening, swing away openings, lasers, 12"x25' infeed rollcase w/knurled rolls, (12) jump chains, (10) pin stops, drive motors, 72"x40' outfeed rollcase w/drive, HEMCO PLC controls,
  • ALLEN BRADLEY Bulletin 1336 constant torque 3 phase AC drive, ALLEN BRADLEY 1336 dynamic brake, SAS 30 hp hydraulic unit, 8'x12' air conditioned/soundproof booth, s/n: 8239
  • SCHURMAN 8TA48 splined arbor edger, 4-saw setworks, 250 hp arbor drive, 50 hp DC feed drive, lasers, powered in & outfeed rollcases, SAS electrics, controls, s/n: 1069
  • SCHURMAN 4CES33-24DAG edger w/chipping heads removed, swing away opening, LOG BOSS setworks, oil mist system, lasers, powered in & outfeed rollcases, SAS electrics, controls, s/n: 2097
  • Shop built 12"x60" SBA edger, 400 hp arbor drive, hold downs, swing away opening, powered in & outfeed rollcases

PLANER MILL
  • WOODS 415 6"x16" 12-knife, 4-head planer, WOODS J4B 22' pineapple feed table, (2) pineapples, 65 hp DC feed drive, 100 hp DC gen set, 8' outfeed rollcase, drive, s/n: 36983
  • SALEM cut 24', pass 26' line shaft trimmer, zero fence, 50 hp arbor drive, 18' 3-section 12-strand feed thru transfer, even end rolls, drives, TOSHIBA PLC controls, electrics, s/n: 7243710
  • IRVINGTON MOORE 43A cut 22', pass 24' RH line shaft trimmer, 50 hp arbor drive, 6' 13-strand infeed & transfer, (6) even ending rolls, 12' 8-strand outfeed transfer, (8) even ending rolls, 5 wheel printer, ALLEN BRADLEY DTAM Plus PLC controls, s/n: 11172R
  • LUNDEN auto sticker placing stacker, board dealers, sticker pockets, 15' 7-strand infeed transfer, (6) even ending rolls, even ending chain, lowering hoist, outfeed transfer, 2-strand sticker transfer, LUNDEN controls, electrics, drives, s/n: 51500
  • LSI auto sticker placing stacker, board dealers, sticker pockets, 12' 5-strand infeed transfer, 5-arm lowering elevator, 30 hp, hydraulic unit, 60"x50' outfeed rollcase, 24' 5-strand outfeed transfer, 2-strand sticker transfer, drives, controls, electrics
  • IRVINGTON MOORE 9-tray sorter, 24'x90' (5) strands of skate rolls, 20' 5-arm belt, drives, electrics, 20' 4-strand infeed transfer, 90' 4-strand green chain
  • Shop built package squeeze assembly, 4'x4'x20' capacity, side squeeze, 25 hp hydraulic unit, 40' 2-secton feed thru transfer, controls, electrics, assortment steel banding, lumber wrap
  • 5-arm breakdown package hoist, 4' arms, hydraulic unit, 20' 5-strand infeed transfer, motor to reducer
  • 5-arm breakdown hoist, 4' arms, gearhead drive, brake, 28' 5-strand infeed transfer
  • 4-arm breakdown hoist, 4' arms, motor to reducer, 30' 3-strand infeed transfer, gearhead drive

CHIP & BARK PROCESSING
  • PEERLESS 24-unit chip bin, hydraulic unit, distribution conveyor, drive
  • (2) ROYAL 20-unit chip bins, hydraulic units, distribution conveyor, drives
  • (3) PEERLESS 20-unit chip bins, hydraulic units, distribution conveyor, drives
  • (2) PEERLESS 14-unit chip bins, hydraulic units, distribution conveyor, drives
  • LAMB 48"x48" hammer hog, SIEMENS 400 hp/585 rpm drive
  • MONTGOMERY ERCSKC Blo-Hog
  • SODERHAMN 58" horizontal feed, top discharge chipper, 150 hp drive
  • 48" 6-knife, horizontal feed, top discharge chipper, SIEMENS 100 hp drive
  • SUTORBILT 12"x30" high pressure blower w/motor, silencer
  • PHELPS flower-feeder, 50 hp drive
  • RADER 20"x25" feeder, MITSUBISHI 7.5 hp/45 rpm gearhead motor
  • 48" 50 hp blower
  • PRECISION PCS-5 5'x5' 3-deck chip screen
  • 4'x12' 3-deck chip screen
  • 6'x8'x10' surge bin
  • 16' dia cyclone
  • 8' dia long neck cyclone
  • 5' dia long neck cyclone
  • Assortment low & high pressure blow pipe

AIR COMPRESSORS
  • QUINCY QNW 1250C rotary screw air compressor, s/n: 71192
  • QUINCY QNW 740B 150 hp rotary screw air compressor, s/n: 770965
  • INGERSOLL-RAND 75H-SP 75 hp rotary screw air compressor
  • SAYLOR BEALL 3 hp vertical tank air compressor

SAW FILING & KNIFE SHARPENING
  • (2) ARMSTRONG #4RH band saw sharpeners, #58 clamps, s/n: 12197, 6297
  • ARMSTRONG #4LH band saw sharpener, #58 clamp
  • (2) ARMSTRONG #5 stretcher rolls, anvils, welding clamps, s/n: 6331
  • ARMSTRONG 3-60C stretcher roll, s/n: 9153
  • (2) ARMSTRONG #25 circular saw sharpeners, s/n's: 15645, 15345
  • ARMSTRONG #16 circular saw sharpener, s/n: 4778
  • IMW 240 babbit guide milling machine
  • SALEM guide grinder, s/n: 86-119075
  • THOMPSON B milling machine
  • HANCHETT DN54 travelling head knife grinder, s/n: 9254P
  • HANCHETT DN40 travelling head knife grinder
  • SA WOODS side head knife grinder
  • NEWMAN G16 knife grinder
  • ACME circular saw sharpener
  • NIELSEN H chain sharpener, s/n: 369
  • ARMSTRONG #60 set up stand
  • Assortment of set up stands, grinders babbit pot, boring machine, guide grinder, band saws, circular saws & more

ELECTRICAL
  • COOPER 1500 kva transformer, 12470 volts to 480Y/277 volt
  • ALLIS CHALMERS 750 kva transformer, 12470 volts to 480Y/277 volt
  • ACME DTSB-63-45 60 kva drive isolation transformer, 460 volt to 460Y/266 volt
  • WESTINGHOUSE 25 kva transformer, primary voltage 240x480 volts, secondary voltage 120/240 volts, single phase
  • SIEMENS Type FCII main mill disconnect, (2) sections x 2000 amp, 480 volt to 480Y/277 volt
  • (2) ALLEN BRADLEY centerline 2-secton MCC's, (2) SMART motor controllers
  • ALLEN BRADLEY centerline 5-section MCC w/(23) switches, size 4 starter
  • (2) ALLEN BRADLEY centerline MCC's w/(9, 6) switches
  • GE 4-section MCC w/(12) switches, (2) WOODS soft motor controllers
  • CUTLER HAMMER Unitrol 4-section MCC w/(16) switches
  • ALLEN BRADLEY Bulletin 1336 constant torque AC drive, 3 phase
  • ALLEN BRADLEY 1336 dynamic brake
  • SAFTRONICS EZ6 500, 400, 240, 200 hp solid state starters
  • SAFTRONICS ER6 150 hp solid state starter
  • SAFTRONICS DC12-17S-2 50 hp solid state starter
  • SAFTRONICS 30 hp solid state starter
  • POWER PLUS AC drive
  • SIEMENS, ALLIS CHALMERS 400 hp starters
  • (2) WOODS SFT starters
  • ALLEN BRADLEY SLC5/03 PLC
  • SQUARE D 800, 225 amp panels
  • Assortment small starters, disconnects, lighting panels

TRANSFERS, CONVEYORS, ROLLCASES
  • Large assortment of tranfers including: 18' 6-strand infeed log transfer, log stop & loader, S-drive w/gearhead motor
  • 26' 4-strand crossover log transfer w/log stop & loader, gearhead motor
  • 60' 3-section 5-strand transfer w/drives
  • 16' 5-strand transfer w/HITACHI 7.5 hp/45 rpm gearhead
  • 6' 5-strand transfer w/US gearhead
  • 28' 6-strand transfer w/RELIANCE 10 hp motor to Falk reducer
  • 30' 5-strand transfer w/US 5 hp gearhead
  • 40' 5-strand infeed log transfer, log stop & loader, S-drive w/motor to reducer
  • 26' 4-strand log transfer, S-drive w/motor to reducer
  • 20' 6-strand log transfer, log stop & loader, MITSUBISHI 5 hp gearhead motor
  • 7' 6-strand transfer w/hyd drive motor
  • 5' 10-strand unscrambler w/hyd drive motor
  • 10' 6-strand transfer w/HITACHI 5 hp gearhead
  • 8' 6-strand lumber landing table w/gearhead
  • 8' 5-strand transfer w/gearhead
  • 32' 5-strand transfer w/motor to reducer
  • 12' 6-strand lumber landing table, 7.5 hp SKK gearhead
  • 8' 6-strand unscrambler, SKK 5 hp double reduction gearhead
  • 8' 7-strand transfer w/SKK 5 hp gearhead
  • 22' 6-strand transfer w/MITSUBISHI 5 hp gearhead
  • 18' 5-strand transfer, SKK 5 hp double reduction
  • 180' 3-section 3 & 4-strand transfer w/gearhead
  • 14' 5-strand transfer w/SKK 5 hp gearhead
  • 22'7-strand lumber landing table, TOSHIBA 5 hp to US reducer
  • 35' 6-strand transfer w/HITACHI 10 hp/45 rpm gearhead
  • 12' 6-strand transfer w/motor to reducer
  • 6' 6-strand transfer, 5 hp gearhead
  • 4'-10' unscrambler, MITSUBISHI 7.5 hp/45 rpm reducer
  • 14' 7-strand transfer, TOSHIBA 5 hp to US reducer
  • 32' 5-strand transfer, SKK gearhead
  • 8' 7-strand transfer, MITSUBISHI 5 hp/45 rpm gearhead
  • 18' 6 strand transfer, SKK gearhead
  • 28' 5-strand transfer w/gearhead
  • 16' 5-strand transfer, SKK gearhead
  • 8' 5-strand transfer, SKK gearhead, 20' 7-strand transfer, MITSUBISHI gearhead
  • 30' 3-strand transfer, gearhead
  • 12' 5-strand transfer, MITUSBISHI gearhead
  • 25' 5-strand transfer, gearhead
  • 20' 5-strand transfer, SKK gearhead
  • 8' 6-strand transfer, (5)even ending rolls, gearhead
  • (3) 25' 6-strand transfers, SKK gearheads
  • 10' 8-strand unscrambler, SKK gearhead
  • 15' 7-strand transfer, (6) even ending rolls, gearhead Conveyors including: 40' infeed log haul, S-drive, gearhead
  • 24' hourglass rolls, gearhead
  • 22' 2-strand outfeed log haul, log stops, S-drive, SKK gearhead
  • 44' log haul, S-drive, SKK gearhead
  • 18"x30' belt conveyor, US 5 hp gearhead
  • 30' 2-strand conveyor w/motor to reducer
  • 32' infeed log haul, log stops, gearhead
  • 24' 2-strand log haul conveyor, log stops, CUTLER HAMMER motor
  • 40' crossover conveyor, SKK 7.5 hp/68 rpm
  • 24"x80' belt conveyor, motor to reducer
  • 18"x40' belt conveyor, TOSHIBA 10 hp to US HERCULES 84 rpm square box reducer
  • 22"x24' belt conveyor, SKK 3 hp gearhead
  • 12"x42' belt conveyor, MITSUBISHI 3 hp/45 rpm gearhead, 80' 2-strand conveyor, hyd drive
  • 32' crossover conveyor, MITSUBISHI gearhead
  • 22' crossover conveyor, SKK gearhead
  • 40' crossover conveyor, SKK gearhead
  • 40' crossover conveyor
  • 16' 2-strand conveyor, MITSUBISHI gearhead
  • 12"x50' belt conveyor
  • 16"x18' belt conveyor, MITSUBISHI 5 hp/45 rpm gearhead
  • 18"x18' belt conveyor, MITSUBISHI 5 hp/45 rpm gearhead
  • MILLPOWER 24"x100' vibratory conveyor, 1" stroke, 425 rpm, TOSHIBA drive
  • WEBSTER 18'x80' vibratory conveyor, fines dropout, drive
  • 24"x18' vibratory conveyor, drive Rollcases including: 24"x30', SKK 5 hp/68 rpm gearhead
  • 36"x40', SKK 5 hp gearhead
  • 36"x45', gearhead drive
  • 24"x24', hydraulic drive
  • 30"x60', SKK 5 hp/230 rpm gearhead
  • 78"x30' w/gearhead
  • 60"x20' spiral, gearhead
  • 36"x36' w/(5) jump chains, TECC 5 hp/45 rpm gearhead, 24"x20', skate rolls, gearhead
  • 36"x8' w/drive
  • 60"x40', SKK gearhead

DRY KILNS, CARTS, STICKERS
  • IRVINGTON MOORE CRT 30'x85' double track direct fire dry kilns, (4) natural gas furnaces, MOORE kiln controls, HONEYWELL burner controls, FOXBORO Record-A-Chart, MOORE kiln scanners, (2) kiln control houses
  • (100+) kiln carts, 36"x60" C.C. on wheels
  • (16+) sticker carts, 36"x60" C.C. on wheels
  • (15,000+) stickers

BUILDINGS
  • 50'x70'x30' eave steel building, clear span, sprinklers, lights
  • 50'x100' steel cooling shed, clear span
  • Assortment wood & metal mill buildings

MISCELLANEOUS EQUIPMENT
  • TURNADO 17" engine lathe, 3-jaw chuck, tool post, tail stock
  • CINCINNATI horizontal milling machine
  • CAROLINA horizontal band saw
  • KALAMAZOO band saw
  • CINCINNATI drill press
  • 50 ton hydraulic shop press
  • LINDE 85 46" pantograph table, RIDGID pipe threader
  • DELTA drill press
  • BLACK & DECKER cutoff saw
  • MILLER 450 amp welder w/wire feed
  • MILLERMATIC S32S welder
  • LINCOLN R3R 300 amp welder
  • oxy acetylene sets
  • ALKOTA, KARCHER pressure washers
  • pedestal grinders
  • chain hoists
  • engine stands
  • hand & power tools
  • shop equipment
  • nuts, bolts, hardware
  • work benches & vises
  • ladders
  • fuel tanks
  • conduit
  • wire
  • electrical supplies
  • chain saws
  • machine tooling
  • MDI, RENS metal detectors, (6) hydraulic units up to 40 hp
  • mill equipment & parts, too much more to list!

OFFICE EQUIPMENT & FURNISHINGS
  • Computers
  • printers
  • fax machines
  • copiers
  • typewriters
  • base radio
  • hand held radios
  • 8' conference table
  • VCR/TV
  • phone system
  • wood & metal desks
  • credenzas
  • office chairs
  • file cabinets
  • bookcases
  • office equipment & supplies, more

ROLLING STOCK
  • BARKO 450 track mounted log loader, PIERCE undercarriage, grapple, s/n: 11464
  • CAT 988B articulated log loader, CAT diesel, MEDFORD log forks, s/n: 50N2069Z
  • CAT 910 articulated bucket loader, CAT diesel, s/n: 80V6398
  • DART KW80 log loader, CUMMINS diesel, s/n: 820018
  • CAT V225B 22,500 lb dual pneumatic forklift, 3208 CAT diesel, enclosed cab, s/n: 70Y00756
  • CAT V225 22,500 lb dual pneumatic forklift, 3208 CAT diesel, s/n: 70Y00729
  • (6) HYSTER H180H 18,000 lb pneumatic forklifts, diesel
  • CAT V50B 5000 lb pneumatic forklift, s/n: 81M1965
  • HYSTER H40H pneumatic forklift, s/n: D13P1638N
  • (3) HYSTER M300H lumber carriers, diesel engines, s/n's: D13P1830V, -1819M, -1638N
  • FORD T/A 10 yd dump truck, V8
  • FORD F1000 T/A water truck, V8 w/pump, spray bar
  • INTERNATIONAL CO4070 truck, diesel
  • 1986 CHEV custom 20 pickup, V8, auto

TERMS & CONDITIONS
  • Auction subject to Bankrupcty Court hearing on October 22. Call for more information
  • 7% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, the day following each auction(4 pm Monday following the Friday auction).
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: Schedule for equipment removal will be announced prior to each auction.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Washington Auctioneers License #48

DRIVER DIRECTIONS
  • DAY 3 TreeSource Industries - Sedro-Woolley Lumber
  • From north or southbound I-5, take the Cook Road/Sedro-Woolley exit(#232).
  • Drive east on Cook Road approximately 4.1 miles to Hwy 20/North Cascades Hwy.
  • Turn right on Hwy 20 and drive 1 block to Hwy 9.
  • Turn left and drive south on Hwy 9 approximately 2/10 mile to Nelson Street.
  • Turn left on Nelson and drive east 2/10 mile to Batey Street.
  • Turn right on Batey and drive south 1/10 mile to Jameson Street.
  • Turn left and drive east on Jameson approximately 1/10 mile to the auction site, located on the right.

LODGING
  • Sedro-Woolley (Best Westerns located in Mt. Vernon, WA, approx 10 min drive)
  • THREE RIVERS INN 800-221-5122
  • BEST WESTERN COTTON TREE INN 800-662-6886
  • BEST WESTERN COLLEGE WAY INN 800-793-4024

WATCH FOR AUCTION SIGNS!

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions

Registration Form | Advanced Bid Overview | Terms & Conditions


Back to Top

James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide