2005 Past Auction: Redi-Fab, Inc. auction, March 3rd, 2005

Click small pics to enlarge

Click here for more photos

10AM - THURSDAY - MARCH 3
Preview 10 am to 4 pm, Wednesday, March 2
11618-B Sumner Street, Portland, OR

Past Auction held in 2005

Display Catalog
Downloadable PDF Catalog
Advance Bid Center

SHOP EQUIPMENT & TOOLS

HYDMECH M20P horizontal metal cutting bandsaw, 20" diameter, 20"x30" rectangular, 75-400 sfm, 10 hp blade drive, 3 hp/6 1/2 gpm pump, hydraulic vise, PLC 100 programmable to 99 jobs, 30O-90O head swing, hydraulic feed control, clean out auger, (3) 41"x10' powered rollcases, 12'x12'x20' steel building with (2) sets of sliding doors, s/n: T010128
HYDMECH S20 Series II horizontal metal cutting bandsaw, 13"x18" rectangular and 12" diameter at 45O capacities, 90-310 fpm, 2 hp motor, 3.5 gpm coolant pump, in and outfeed gravity rolls
PIRANHA SEP120 120 ton single end punch, 1 1/2"-1" mild steel at 60,000 psi tensile strength, 21.5" throat depth, 12 1/4" open height, 10 1/4" closed height, 2" stroke length, 20"x10" platen size, 16 spm at 1" 10 hp, 30 gallon hydraulic unit, 3/16"-1 9/16" dies
PIRANHA P90 90 ton iron worker, 1 1/8" diameter through 1" shear: 1"x12" flatbar, 3/4"x18" flat bar, 6"x6"x5.8" angle, 2" round bar, 1 3/8" square bar, coper notcher, 4"x6"x3/8" dies, infeed rolls, s/n: P901413
PIRANHA P50 50 ton iron worker, punch capacity 30 ton mild steel, 1 1/16"-1/2" diameter and 13/16"-3/4" diameter, shear capacity, 1"x4" flat bar with holddown, 3/4"x10"x15" flat bar, 5"x5"x3/8" angle, 4"x4"x12" with special knife, 1 1/2" round bar, 1" square bar, coper notcher, 2 3/4"x4"x1/4", s/n: D50-7128
SABER hydraulic pipe bender, 2" capacity ENERPAC Titan Genesis series pump, dies, s/n: 10703/RM
(2) NITTO Selferace HS071624 hydraulic operated portable punches,w/HDP-05 double acting hydraulic pumps, 52 ton capacity, 5/8" max thickness, 15/16" punch diameter, 2 3/4" throat depth, 1" ram stroke, 11.8 second punch time
2004 shop built beam camber machine, hydraulic operated
JET HVBS-7MW horizontal metal cutting bandsaw, 7" round, 7"x12" rectangle capacity, 9 3/8"x10" throat depth, 86-260 sfpm, 3/4 hp, single phase, 115/230 V, s/n: 80810077
METAL HAWG 6"x36" aggressive belt sander, 5 hp/3505 rpm, 208-230/460 V
AMERICAN/BELAIRE 132091 15 hp 2 stage compressor, w/horizontal tank, s/n: 70621
DAYTON 5 hp single stage air compressor, 3 phase, w/vertical tank
HANKISON HIT50-115H compressed air dryer, 50 scfm at 125 psig 175 psig max, s/n: NHT50C1150108468
(13) shop built jib cranes w/CM LODESTAR 1 ton electric chain hoist, pendant controls (certified)
VICTOR VCM200 track torch, 100 volts w/6' track, table, 4"-96" circle diameter, 1-60 ipm, 115 V, single phase, s/n: 0012379
THERMAL DYNAMICS 100XL Plus plasma cutting system, SURELOK torch, Smart Logic Smartstart, flow through cooling w/BUG-O Gopher III HS portable torch attachment, track
THERMAL DYNAMICS Cutmaster 100 plasma cutting system, SURELOK torch, tip saver, 1 1/2" severance cut, cart
PROWELD Arc 1850 stud welder, single gun, 12 ga-3/4", w/supplies
LINCOLN Ranger 9 250 amp AC/DC welder, 115/230 V, ONAN Performer 18 gas engine, (201 hrs)
LINCOLN SA200F 200 amp gas DC welder
(11) MILLER 652 650 amp welders, w/MILLER 60 series wire feeder
(2) MILLER 452 450 amp welders, w/MILLER 60 series wire feeder
(2) MILLER 300 CV-DC 300 amp wire feed welders
Assortment of shop equipment & tools including: (3) 8'x8 1/2'x20' CONEX boxes, JANCY USA 5000 mag drill, (2) HOUGEN rota broach mag drills, (2) JANCY slugger mag drills, MAGFORCE mag drill, JET JDP20MF drill press, (2) JET JDPM17F drill presses, JET 8" double end grinder, GRACO 190 paint sprayer, SHERWIN WILLIAMS SW419 paint sprayer, MAKITA chop saw, (2) MAKITA roto hammers, air impacts, angle grinders, air nibblers, 3/4" drive socket set, plate magnets and clamps, oxy/acetylene sets, hose and carts, welding rod ovens, rod and lead, fiberglass step and extension ladders, radios, GREENLEE job box, rigging chains, steel inventory, racks, benches, tables and saw horses, forklift extension, chain saw, (2) propane shop heaters, chain link enclosures, paint and sandblast curtains, eye wash station, hand trucks, carts, pipe rolls, welding screens, hogging bits, stud supplies, MOTOROLA portable radios, 50 ton hydraulic jack, office equipment and furniture, much more

ROLLING STOCK

2000 FORD F650XL Super Duty 24' flatbed, CAT 3126B diesel, ALLISON AT545 trans, KNAPHEIDE deck, w/headache and material racks
1985 CHEVY C30 pickup, V8 gas, 4 speed, PAYDAY PLUS 8' steel bed w/boxes and racks
1978 FORD F350 pickup, V8 gas, 4 speed, 12' steel flatbed w/headache and material racks
1974 CHEVY C60 16' flatbed, V8 gas, manual trans, w/headache and material racks
1994 HYSTER H80XL 8000 lb propane forklift, monotrol, 145" 2 stage mast, solid tires, side shift, 72" forks, s/n: G00D503632R
1994 HYSTER H50XM 5000 lb propane forklift, 188" 2 stage mast, monotrol, solid tires, side shift, 48" forks, s/n: D177B09740R

TERMS & CONDITIONS

10% BUYERS PREMIUM
PAYMENT: Full payment must be made by the close of business auction day.
Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. All items must be removed 1 hour after the sale or 8am to 4:30pm, Friday March 4 and Monday, March 7.
Announcements made by the auctioneer at the time of sale take precedence over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
Due to safety & insurance reasons, persons under 12 not admitted.
Washington Auctioneers License #48

DRIVER DIRECTIONS

From northbound I-205 take the I-84 E/US 30 E exit (#22) toward The Dalles/Mt. Hood/Columbia River Gorge.
Take 122nd Ave. exit (#10). Turn right and drive north on 122nd Ave which becomes 122nd Blvd to NE Marx St.
Turn left onto NE Marx St. then right onto NE 121st Ave. which turns into NE Sumner St and drive to the auction site.
From southbound I-205 take the Airport Way exit (#24).
Turn left onto NE Airport Way and drive east to NE 122nd Blvd.
Turn right onto NE 122nd Blvd. and drive south to NE Marx St.
Turn right onto NE Marx St. then right onto NE 121st Ave. which turns into NE Sumner St and drive to the auction site.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE

James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554