Click small pics to enlarge
Olympic Wood Products

10AM - TUESDAY - MAY 18
Preview 10am to 4pm, Monday, May 17
30 E Export Road, Shelton, WA

Past Auction - held in 2004

Display Catalog

Downloadable PDF Catalog

Advance Bid Center

LOG MERCHANDISING AREA
  • OLYMPIC pedestal mount hydraulic log loader, swivel grapple, 50 hp
  • 60” swing arm log cutoff circular saw, 50 hp, log cradles, 24”x10’ outfeed hourglass rollcase w/log length pin stops
  • SALEM 21” 5-tool ring debarker, 60 hp AC ring drive, 40 hp DC feed chain drive, pneumatic hold down rolls, controls, hydraulics, FRANK DC electrics

RESAW, EDGERS
  • KIKUKAWA Type KV43 43” LH mechanical strain vertical band resaw, gearhead powered feed rolls, 30 hp bandmill drive, in & outfeed rollcases, s/n: 19711
  • SALEM 6”x24” top splined arbor gang edger, 200 hp, mist system, lasers, in & outrfeed rollcases, s/n: 76-65035
  • CHIP-N-SAW board edger

DRY KILNS
  • 1995 AMERICAN Wood Dryer 38’x46’ aluminum shell bolt together dehumidifying dry kiln, side load, w/NYLE NT108 dehumidifier, controls, CARRIER compressor
  • (2) 1994 AMERICAN Wood Dryer 38’x46’ aluminum shell bolt together dehumidifying dry kilns, side load w/NYLE NT108 dehumidifier, controls, CARRIER & CARLYLE compressors

SAWS, PLANERS, MOULDERS, STRAPPING
  • MEREEN JOHNSON 424-DC/BD 4”x24” multi rip saw, 100 hp top arbor drive, 5 hp vari speed feed roll drive, manifold, electrics, 5268 hrs, s/n: MJ-6343
  • YATES AMERICAN 4”x30” 6-knife top & bottom head planer, 75 hp top head, 40 hp bottom head
  • HEIAN RS12 circular rip saw, slat chain bottom feed, 20 hp
  • (2) SUGIMOTO stake pointer saws
  • 3”x24” multi rip saw
  • CHOP SAW LINE: 9.5’ 4-strand H87 package deck w/13’ 5-arm tilt breakdown hoist, 25’ 4-strand board transfer, (2) PRECISION 14M right hand, PRECISION 28 right hand, PRECISION 28 left hand chop saws w/infeed rollcases, 6”x25’ outfeed belts, 12”x24’ block belt, 6”x40’ waste belt
  • KIKUKAWA FJ-28 finger joint line w/live bottom block hopper, cutter head,assembly, crower tables, cutoff saw, payout table, hydraulics, controls, electrics, s/n: 2263-2
  • MOULDER LINE: WEINIG U22A 5-head moulder, 24”x12’ canted roll feed table, s/n: 222-746, PRECISION double end trimmer on infeed w/rail mounted power travel saw, SONY DRO, MOISTURE LOGIC 340 moisture detector w/sensors, 10’ 4-strand line infeed package deck, 4’x10’ tilt package, AMERICAN 6000 lb hydraulic scissor lift
  • 2000 GAUJING GA622 4”x8” 5-head 4-knife moulder, bottom, outside, top, top, bottom head configuration(never installed)
  • JWM 4”x8” 5-head 4-knife moulder, bottom, outside, inside, top, top head configuration
  • (3) board end trimming, board bundle strapping, board sticker stacker machines
  • (2) NAKANO BUSSAN ALHB, (1) Alpha HP 4 meter end trimming/strapping/stacking machines, w/rail mounted double end board trimmer, feed thru transfer, (3) lumber bundle package strappers, sticker stacker w/lumber dealing arms, (3) adjustable 42” sticker placers, hydraulic stacking scissor lifts, outfeed package decks, trim end waste belt conveyors, controls, electrics

AIR COMPRESSORS
  • SULLAIR LS16-75H/A/HT 75 hp rotary screw air compressor
  • SULLAIR 12B-60M 60 hp rotary screw air compressor, 125 psig
  • SULLAIR LS10 40 hp rotary screw air compressor
  • SULLAIR 24KT LS16 25 hp rotary screw air compressor, 200 psig
  • WORTHINGTON Monorotor air compressor
  • WAYNE 10 hp 2-stage tank mounted air compressor
  • CURTIS/TOLEDO 10 hp tank mounted air compressor
  • ZURN HL60 air dryer
  • (5) FROSTO tanner tanks
  • Assortment air receiver tanks, air lines throughout plant

LOG, LUMBER TRANSFERS, CONVEYORS
  • LOG HAULS: (2) 50’ H110, w/(3) hydraulic log sweeps, hydraulic support
  • LOG DECKS: 20’ 3-strand H82•20’ 3-strand H78•20’ 3-strand H124 jack ladder
  • LUMBER TRANSFERS; 5’ 4-strand H78 rooftop•11’ 3-strand 81X, 10’ 3-strand H78•25’ 4-strand H78•45’ 4-strand C78 4” rolltop
  • CHAIN CONVEYORS: 80’ H110 w/UHMW•(2) 75’ H110•75’ H78 w/flites•40’ H110•25’ H110•12’ H110
  • BELT CONVEYORS: 12”x40’ chevron belt
  • BREAKDOWN HOISTS: 9.5’ 4-strand H78 deck w/13’ 5-arm tilt package breakdown hoist•20’ 4-strand H78 deck w/11’ 3-arm tilt package breakdown hoist

MILL EQUIPMENT
  • 6’x17’x5’ lumber unit dip tank w/package hoist, STARPAK D52 semi automatic package strappers
  • 6’ rotary sort table
  • (6) 4’x4’x4’ fingerjoint block bins

ROLLING STOCK
  • LE TOURNEAU F-804A Series articulated log stacker, 40 ton capacity, DETROIT diesel, s/n: 6963B/MJL8188
  • JOHN DEERE 544E articulated front end loader, 6 cyl diesel, 4 spd, w/GP bucket
  • CAT 930 articulated front end loader, 4 cyl diesel, 3 spd powershift trans, log forks, s/n: 41K11248
  • LE TOURNEAU 2594 log stacker(parts machine)
  • Assortment of engines, tires, equipment, 2500 gal diesel fuel tank w/pump, hose, nozzle

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Wednesday, May 19.
  • A 25% deposit is required by the close of business, auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #48

DRIVER DIRECTIONS
  • From north or southbound Hwy 101, take the Wallace Neeland Blvd exit.
  • Drive east on Wallace Neeland Blvd which turns into Johns Prairie Road, approximately 3.3 miles to East Export Rd.
  • Turn right and drive south on Export Rd to the auction site, located on the right.

WATCH FOR AUCTION SIGNS


LODGING - AIRPORTS
  • Lodging is available close to the auction location. Sanderson Field is located approximately 4 miles west of auction site. Aircraft services are available.


Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide