ITEMS FOR IMMEDIATE SALE

Please choose the links below for details on the item(s) you are interested in.

For Immediate Sale:
KZ PACKAGING
Olympia WA
Click here to view

#1 ASSEMBLER w/DIE CUTTER


• 1985 MILWAUKEE TOOL assembler for chipboard. Runs 1 or 2 out, height range 4" to 9.5", capable of multi cell. Computer controlled indexing. Feeder designed by KAY PACKAGING, plus take off table
• Electrical requirements: 3 phase standard industrial
• Air requirement: has been run off 10 hp standard compressor
• 30" wide die cutter made by MILWAUKEE TOOL, height range 1 1/8" to 10"
• No tooling required except for dies
• Includes roll stand with automatic web feed and take off table
• $110,000
  
  #2 ASSEMBLER w/DIE CUTTER
  
  
• 1985 MILWAUKEE TOOL 14 assembler, for chipboard partitions. Runs 3 out @40-45,000 per 7.5 hr day, 12 and 24 cell , height range 4" to 7". Computer controlled indexing. Feeder designed and built by KAY PACKAGING(vacuum feed for short cards), offbearing table for 3 out designed and built by KAY PACKAGING
• Electrical requirements: 3 phase standard industrial
• Air requirement: has been run off 10 hp standard compressor
• 30" wide die cutter made by MILWAUKEE TOOL, height range 1 1/8" to 10"
• No tooling required except for dies
• Includes roll stand with automatic web feed and take off table
• $110,000
  
  #3 ASSEMBLER w/DIE CUTTER
  
  
• 1985 MILWAUKEE TOOL designed assembler, modified with computer controlled indexing. Runs 2 out, height 2 7/8" to 8", 6, 8, 10, 12 , 24, and 36 cell, 25,000 per 7.5 hr. day, includes auto strapper/bundler. Production unit runs with (1) person
• Feeder designed and built by KAY PACKAGING, off bearing table works for glued air cell, plus anything else, designed and built by KAY PACKAGING
• Automatic strapper feed available
• Die cutter same as above
• $125,000
  
  #4 ASSEMBLER w/DIE CUTTER
  
  
• 1985 MILWAUKEE TOOL designed assembler, modified with computer controlled indexing. Runs 2 out, height 4 1/2" to 10", 4, 6, 8, 10, 12, and 24 cell, 25,000 per 7.5 hr. day, 4, 6, or 8 cell glued down. Includes auto strapper/bundler. Production unit runs with (1) person
• Feeder designed and built by KAY PACKAGING, off bearing table works for glued air cell, plus anything else, designed and built by KAY PACKAGING
• Automatic strapper feed available
• Die cutter same as above
• $125,000
  
  #5 HYDRAULIC AUTOMATIC PARTITION MAKER w/DIE CUTTER/ASSEMBLER
  
  
• Automatic height range 5" to 13", average run with wine partitions, 18-20,000 per 7.5 hr day, runs with (1) person, designed and built by KAY PACKAGING in 1998 - designed for liquor, wine and production beer, tooling requires dies, includes extra hydraulic servo motors and valves
• $75,000
  
  #6 HUNTINGTON PARTITION ASSEMBLER
  
  
• Runs w/(1)person, designed for multicell, specialty partitions
• $15,000
  
  #7 KAY'S 'H' MACHINE(low voltage, state of the art)
  
  
• KAY PACKAGING custom built, fully automatic partition maker w/automatic shingler take-off table, runs 12 cell to 15 cell. 12 cell: 4" to 8.5" cells, 15 cell: 6" tall. Average speed 2,600 units per hour
• $225,000
  
  SHEET LAMINATOR SYSTEM
  
  
• 52" sheeter w/tandem roll stand, hydraulic takeoff, operator adjusted sheet feeder to gluer, BLACK BROTHERS compression unit, (2) scissor hydraulic lifts, 4'x8' hydraulic press, (4) glue totes
• $20,000
  
  MISCELLANEOUS EQUIPMENT
  
  
• Assortment of compressors including DAYTON, INGERSOLL-RAND, package strappers including SIGNODE, STROPAK; Plus bench grinders, pallet wrapper, KILKOM baler w/air bags, pallet jacks, box stitchers, office furniture & equipment, more
• Call for prices, deal for lot
  
  PREVIEW INFORMATION: For an appointment to preview the equipment, please the James G. Murphy Company, 425-486-1246 or toll free, 1-800-426-3008
  
  SALE TERMS: Cash, cashiers check, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  
  DRIVER DIRECTIONS:
• From north or southbound I-5, take the Port of Olympia/City Center exit(#105, 105B).
• Drive north on Plum Street approximately 6/10 mile to State Avenue.
• Turn left and drive west on State approximately2/10 mile to Jefferson St.
• Turn right and drive north on Jefferson St approximately 1/10 mile to the warehouse, located on the right.
  
  

• For additional information contact Andy Taylor, James G. Murphy Inc, 503-463-4444 or via email: andy@murphyauction
  
  
• Geo Energy Electrostatic Precipitator model # 811.5-24 SS, 5000 CFM capacity, all stainless steel construction with:
• HV Transformer and all controls
• Mist elimination system
• Safety Interlock system
  
  
• Harrington I.D. Fan model # HPR-21, 21 inches, non-corrosive fiberglass fan housing with 30hp motor
  
  
• Smoke Stack, fiberglass construction, approx. 80 ft. tall, 24 inch diameter
  
  
• Ceilcote Wet-Scrubber, Crossflow horizontal style, packed bed, non-corrosive fiberglass construction complete with:
• Tellerette³ packing material
• Worthington 6x4x8 stainless steel pump
• PVC water piping, valves and sprayer bars
• 20" stainless steel smoke inlet piping with multiple spray nozzles
  
  
• This system is complete and includes all components of the emission system for exhausting a: Pulse Jet single pass material dryer (3,500lbs. per hour rating). Operators manuals, construction drawings, electrical schematics and other documentation are on hand and further information can be provided upon request.
  
  

• For additional information regarding equipment for sale, contact Andy Taylor, James G. Murphy Inc, 503-463-4444 or via email: andy@murphyauction

  ITEM #	DESCRIPTION	LOCATION	PRICE	Photo icon
  2	Kockums Model C 4"x24" Optimizer Edger	Anderson, CA	12,500.00
  3	Ukiah 12" Gang Edgers	Anderson, CA	15,000.00
  4	Ukiah 4"x54" Board Edger with 4 Shifting Saws	Anderson, CA	10,000.00
  5	Nicholson Roto Drum Lily Pad Chipper	Anderson, CA	2,500.00
  6A.1	I.E.S. Regenerative Carriage Drive, U.S.125HP, Sumitomo 1150-2000RPM, 500 Volt, Isolation Transformer	Anderson, CA	35,000.00
  7	Planer Mill Line Consisting of Stetson Ross 612C1 Planer/Matcher, 6 Heads, 20 Knife Top & Bottom,16 Knife Sideheads, Planer Feed Table, Slowdown Belt, Breakdown Hoist, Belt Transfer, Grading Table, Irvington-Moore 20’ Trimmer, Board Stamper, Planer Chain, Lumber Roll Outs, Over End Stacker, ACME Signode Banding Station	Burney, CA	125,000.00
  8	Irvington-Moore 20’-11 Pocket Sticker Stacker with Lunden Sticker Feeder, Also Available: P.E.T. Saw, Unscramblers, Transfers, Roll Cases	Burney, CA	25,000.00
  9	Salem 54" Vertical Band Resaw, 75HP Arbor Drive Motor, Mechanical Strain, 64:1 Strain Ratio, 1600# Max. Strain, 619 Max. RPM, Hydraulic Driven Infeed Rolls, S/N 67986-76, Also Available: Lumber Unscramblers and Infeed Transfers	Chinese Camp, CA	15,000.00
  10	Resaw Line Consisting of McDonough 54" Vertical Band Resaw, 50HP Arbor Drive Motor, Mechanical Strain, In & Out Feed Rolls, 20’-3 Arm Tilt Hoist, Infeed Transfer, Outfeed Belt Transfer, 20’-4 Arm Re-entry Tilt Hoist with Sticker Recovery System, Lumber Transfers to Over End Stacker	Sonora, CA	110,000.00
  11	ADCO West Stud Mill Model SM2-3-42x4-Man-Svag, 75FPM, 4 Heads, 50HP Motors, 9 Section MCC Single Strand Feed Thru Chain, S/N 75-175x40-3/4-01050, Infeed Transfer, Spiral Roll & Belt Outfeed, Metal Building	Sonora, CA	25,000.00
  15	Irvington-Moore 26’ Cut, 32" Pass R.H. Trimmer, Line Shaft, 11 Strand Infeed with (8) 15 _’ Even End Rolls	Lincoln, CA	5,000.00
  16	(2) Ukiah 4"x48" and 4"x36" STA Board Edgers, 30HP Arbor Drive Motors, Infeed Rolls, Outfeed Belts, Laser Lights, Guides and Saws	Oroville, CA	25,000.00
  17	Industrial FJS-25 Fingerjointer Line with Short Block Conversion, Infeed Block Bin, L&R Jointer Heads, Glue Application Rolls, Cut-off Saw, 18’ Payout Table, S/N FJS25SP-3-771	Richfield, CA	10,000.00