Click small pics to enlarge

Click here for more photos

Eel River Sawmills
EEL RIVER SAWMILLS

THURSDAY & FRIDAY - APRIL 15 & 16
9am Each Day
Preview 9am to 4pm, Wednesday, april 14 or by Appointment
26011 Avenue of the Giants, Redcrest, CA

Past Auction - held in 2004

Display Catalogs: Day 1 | Day 2

Downloadable PDF Catalog

Advance Bid Center

DEBARKER, DAY 1
  • NICHOLSON A1 43" 5-arm ring debarker, cedar/redwood type, NEWMAN 75 hp/1200 rpm ring drive, AB 1395 digital DC drive, BALDOR 40 hp/1750-2100 rpm DC feed drive, FALK 50.5 reducer, alligator feed chain, tandem hold down rolls, B&T 40 hp hydraulic unit, cab, controls, 52' 2-strand infeed log haul, TOSHIBA 20 hp/1760 rpm, FALK 30 rpm reducer

WHOLE LOG CUTOFF SAW, DAY 1
  • 72" insert tooth whole log cutoff saw w/cradle & cylinders, MITSUBISHI 100 hp/880 rpm drive, 26' C150 in &outfeed log haul, BALDOR 50 hp/1750-2100 rpm, FALK 30 rpm reducer, AB 1395 drives, 10' box chain clean out conveyor, CYCLO, 5hp/50 rpm

HEADRIG BANDMILL, SLABBER, DAY 1
  • ALBANY 7' RH double cut headrig bandmill, 1 1/2" top wheel, GE 300 hp/1000-2000 rpm, 500volt DC drive, SAFTRONICS KDC12-1250-4 DC drive, isolation transformer, 1997 DIXSON saw deviation system, PLC 24' infeed rollcase, (7) 8"x40" cone side rolls, 6' 5-strand crossover transfer, SKK 7 1/2 & 10 hp/155 rpm, 24' outfeed rollcase, (7) 8"x40" rolls, 5' 6-strand jump transfer, TOSHIBA 5 hp/1755 rpm, MITSUBISHI 100 rpm reducer, SM CYCLO, cab, controls, spare saw, (2) spare wheels, parts
  • CM&E 64 Temposonic positioned slabber, key knife conversion, TOSHIBA 200 hp/1150 rpm, CUTLER HAMMER size 5 auto reduced voltage starter

CARRIAGE, SCANNER, DAY 1
  • 1990 SALEM 20' 60" 3-knee Temposonic positioned carriage, air dogs, tongs, flippers, (6) trucks, pantograph, rail, bumpers, spare parts, s/n: 14509390
  • 1990/1995 INOVEC Yieldmaster log scanning system, (43) cells, updated 1995, INOVEC/FAC 60 hp hydraulic unit, 1760 psi, 60 gpm, cab, controls
  • ELLISON hydraulic log turner

RESAWS
  • SALEM 6' vertical resaw, 13' Temposonic positioned line bar, INOVEC 5PC positioning, BROOKS 100 hp/1160 rpm, (2) powered pinch feed rolls, feed thru rolls, 20' split infeed rollcase, (6) 6"x29" rolls, drives, 20' outfeed rollcase, (12) 6"x29" rolls, SM CYCLO 5 hp/50 rpm, INDUSTRIAL ELECTRIC Size 5 reduced voltage starter, FAC 5 hp hydraulic unit, spare saws, parts, DAY 1
  • SALEM 5' vertical resaw, 13' line bar, setworks, (2) powered pinch rolls, 10' infeed rollcase, (6) 6"x24" rolls, GE 15 hp DC & 15 hp MG sets, 20' outfeed rollcase, (11) 6"x24" rolls, GE gearhead, SAFTRONICS drive, spare saws, parts, DAY 2
  • TURNER 42" vertical resaw, 40 hp, tilting table, 8' single pineapple feed table, (6) 6"x24" spiral rolls,3' 3-strand infeed transfer, DAY 2
  • TURNER 42" twin vertical resaw, 25 hp, powered pinch feed rolls, in & outfeed gravity rollcases, s/n: W700, DAY 2

EDGERS, DAY 1
  • SALEM 10"x66" splined bottom arbor gang edger, 350 hp/1760 rpm arbor motor, BROOKS 350 hp/1760 rpm, 50 hp DC feed drive motor, 20 hp MG set 24' split infeed rollcase, jump transfers, 4-arm flipper, 24' outfeed rollcase, (7) 8 1/2"x66" rolls, 8' 6-strand crossover transfer, (12) lasers, rack, PACIFIC HOE oil mist system, (2) size 6 starters, spare saws, parts
  • SALEM 8"x48" splined bottom arbor board edger, 5-saw shifting setworks, CENTURY 200 hp/1500 rpm, MOTOTRONICS 200 hp motor brake, 20 hp MG set on feed drive, 24' infeed rollcase, INOVEC PC 5 positioning, (7) 8 1/2"x56" rolls, 4 1/2' 4-strand jump transfer, 24' outfeed rollcase, (10) 8 1/2"x60" rolls, edge picker, (7) lasers, rack, MOTOTRONICS 200 hp motor brake, FAC 7 1/2, 15 hp hydraulic units, spare saws, parts

TRIMMERS, HULA SAWS
  • IRVINGTON MOORE 26' cut, 26' pass line shaft trimmer, 50 hp, 17' 10-strand lugged transfer, 15 hp DC, MG set, (8) 10"x42" even end rolls, zero fence, SAS positioning, zero saw, 30' outfeed rollcase, (11) 10"x40" rolls, TOSHIBA 5 hp, EURODRIVE reducer, TOSVERT 130GI transistor inverter, IES/MODICON PLC, SAS 10 hp hydraulic unit, ALEMITE oil mist system, spare saws, parts, DAY 1.
  • LSI 26' cut, 28' pass line shaft trimmer, zero fence & saw, 100 hp drive, 26' 2-section 10 & 11- strand lugged infeed transfer, (8) 10"x42" even end rolls, 30' outfeed rollcase, (15) 10"x36" rolls, drives, controls, spare saws, parts, DAY 1
  • LSI 24' cut, 30' pass individually motorized trimmer, zero fence & saw, 11' 9-strand lugged infeed transfer, (6) 10"x42" even end rolls, AB 5/20 PLC, spare saws, parts, s/n: 130119, DAY 1
  • (2) hula saw stations, (2) 22" saws, 10 hp/3450 rpm, outfeed gravity rolls, (2) 15"x23" belt transfers, (2) lasers, lumber swede, 10' 7-strand lumber landing table, EURODRIVE 3 hp/40 rpm, 10' 6-strand incline transfer, EURODRIVE 3 hp/40 rpm, DAY 2
  • Hula saw station, (2) 22" hula saws, 10 hp/3450 rpm, 22' 8-strand H78 infeed transfer, DAY 1

LUMBER STACKING SYSTEM, LUMBER HOISTS
  • IRVINGTON MOORE 20' lumber stacker, 30' 5-strand H78 infeed transfer, TOSHIBA 5 hp/1750 rpm, FALK 45 rpm reducer, 20' 5-arm tilt hoist , TOSHIBA 10 hp/1735 rpm, WESTERN gear reducer, 15"x26' sticker belt, SM CYCLO 5 hp/50 rpm, 8' 5-strand H78 transfer, EURODRIVE 5 hp/40 rp, 16' 7-strand H78 transfer, EURODRIVE 3 hp/40 rpm, 4' even ender, 20' 5-arm lowering hoist, 16' 5-strand H78 transfer, EURODRIVE 3 hp/40 hp, 26' 2-strand recovery chain, 20' 5-strand H78 outfeed transfer, GE 7 1/2 hp/30 rpm, 20 hp hydraulic unit, DAY 2
  • 12' 3-arm lumber hoist, 50" arms, GE PACIFIC w/brake, DAY 1
  • 16' 5-arm lumber hoist, 57" arms, TULSA winch, DAY 1
  • 15' 4-arm lumber hoist, 54" arms, TOSHIBA w/brake, DAY 2
  • 15' 4-arm lumber hoist, 54" arms, BALDOR motor, WESTERN reducer, DAY 2

CHIP BINS, DUST COLLECTION CYCLONES, BLOWERS, DAY 1 & 2
  • 80 unit, (3) 40 unit, 20 unit hydraulic chip bins
  • Multi cone dust collection system, (6) 5' dia long neck cyclones, rotary air locks, 30' twin screw distribution auger, EURODRIVE gearhead, (2) 12' single screw augers, (5) 36" dia, blowers, 50 hp, SUTORBILT 10"x30" high pressure blower, AC 40 hp, RADER 24"x24" chip feeder, EURODRIVE 5 hp/50 rpm
  • 12', 6' dia cyclones
  • 10',7', 4' dia long neck cyclones
  • SUTORBILT 10"x30" 3000 Series blower, TOSHIBA 75 hp/1765 rpm, w/silencer
  • (2) SUTORBILT 10"x20" blowers
  • RADER 10"x18" 400 Series blower, AC 50 hp/1770 rpm, silencer
  • Large quantity of blowers to 72" dia, 16"-24" spiral blowpipe, 6" welded blowpipe

HOG, HAMMERMILL, CHIPPER, CHIP FEEDERS, CHIP SCREEN, DAY 1 & 2
  • LAMB 36"x42" Maxi Hog hammer hog, TOSHIBA 200 hp/1775 rpm, horizontal infeed, bottom discharge, top & bottom feed rolls, LINKBELT 1 1/2 hp, SKK 56 rpm reducers, s/n: 780711 DAY 1
  • JEFFREY 30AB hammer mill, GE 50 hp/1760 rpm, horizontal infeed, bottom discharge, s/n: 11631 DAY 1
  • SODERHAMN 58 8-knife chipper, AC 250 hp/1180 rpm, horizontal infeed, bottom discharge, 300 hp auto reduced voltage starter, key knife conversion
  • 30"x30" chip feeder, SM CYCLO 7 1/2 hp/30 rpm
  • RADER 24"x24" chip feeder, EURODRIVE 5 hp/50 rpm
  • 20"x20" chip feeder, HITACHI 5 hp/40 rpm
  • COE 6'x12' 3-deck chip screen, BALDOR 5 hp/1750 rpm

VIBRATORY CONVEYORS, DAY 1 & 2
  • 1997 MILLPOWER 36/43 36"x88' vibratory conveyor
  • MILLPOWER 36"x45' vibratory conveyor, 6' fiberglass tub, RENS L240 metal detector, fines dropout
  • GENERAL KINEMATICS 24"x140' vibratory conveyor
  • GENERAL KINEMATICS SC36/42-12x40 36"x40' vibratory conveyor, 6' fiberglass tub, RENS L240 metal detector
  • WEBSTER 24"x20' vibratory conveyor

COMPRESSORS, DAY 1 & 2
  • 2000 KAESER DS141 100 hp rotary screw air compressor, SIGMA on demand system, 110 psig, 520 scfm, s/n: 1019
  • QUINCY QNW 950D rotary screw air compressor, 41,110 hrs, s/n: 760133
  • QUINCY QNW 740B rotary screw air compressor, 35386 hrs, s/n: 750477
  • ZURN R140A compressed air dryer, 200 psig, 700 scfm @ 100 psig, s/n: R156681

PLANERS
  • STETSON ROSS 6-10-A1 planer/matcher, 8"x25", (6) heads, 12 knife top & bottom, 14 knife side heads, 60 hp top, 30 hp bottom head, 15 hp top & bottom profile heads & side heads, GE 30 hp DC feed drive, 26' dual pineapple feed table/bridge, (8) 8"x36", (3) 8"x18" rolls, TECO 15 hp, GE 30 hp MG set, 60", 80" planer slowdown belt, (30+) spare heads, profile yokes, jointer bars, spares, s/n: 3806, DAY 2
  • YATES AMERICAN A21 planer/matcher, 6"x15", (6) heads, 10 knife top & bottom, 12 knife side heads, 50 hp top head, 25 hp bottom head, 50 hp top profile head, 15 hp bottom profile & side heads, GE 50 hp DC feed drive, GE 75 hp MG set, 24' triple pineapple feed table/bridge, 50 hp DC, GE/LINCOLN 50 hp MG set, 30"x48", 24"x48" planer slowdown belts, spare heads, parts, s/n: 12276, DAY 1
  • YATES AMERICAN A20 planer, 6"x15" (4) heads, 8 knife, INDUSTRIAL ELECTRIC 75 hp/1200 rpm belt drive, BALDOR 50 hp/1765 rpm feed drive, BALDOR 1D154450-EO adjustable speed drive, spare heads, parts, DAY 2
  • 1997 WAGNER 683i-CE moisture meter, w/220 18" sideways sensors, 3" max thickness, 3/4" min thickness, unlimited board width, 4" min board width, monitor, printer, s/n: 3CE-130, DAY 2

BANDING STATION, PACKAGE BUMPER, LUMBER ROLLOUTS
  • SIGNODE banding station w/M22 power strapper, top & side squeeze, MAC FAB bumper gates, 30' infeed rollcase, (10) 8"x54" rolls, 8' 5-strand H78 infeed transfer, AC 3 hp/1735 rpmm FALK 45 rpm reducer, TOSHIBA 5 hp/1735 rpm, FALK 45 rpm reducer, 46' outfeed rollcase, (16) 8"x54", (16) 4"x50" helper rolls, AC 3 hp/1735 rpm, FALK 45 rpm reducer, (3) 24' 4-strand in & outfeed transfers, TOSHIBA 5 hp/1735 rpm, FALK 45 rpm reducers, B&T 40 hp & 10 hp hydraulic units, spares, corners, DAY2
  • 28' lumber even end station w/(11) 8"x54" rolls, TOSHIBA 20 hp/1175 rpm, DAY 2
  • (50+) 4'x20' lumber rollouts

FILING & GRINDING EQUIPMENT, DAY 1 & 2
  • NIELSEN 800 travel bed grinder
  • UTC 250 travel bed grinder, s/n: 753
  • HANCHETT Size 60 CK travel bed grinder, s/n: 1283
  • NEWMAN #71 travel bed grinder
  • ISELLI EBN dual grinder, s/n: 1318910
  • PRECISION tub grinder
  • ARMSTRONG #6 RH sharpener w/adjustable speed drive
  • ARMSTRONG RH & LH sharpeners, s/n: 15108
  • ARMSTRONG #2LH sharpener, s/n: 5886
  • ARMSTRONG 3-60 stretcher roll, s/n: 11282
  • ARMSTRONG 3-100 stretcher roll, s/n: 11388
  • (2) ARMSTRONG #4 stretcher rolls w/anvils & stands
  • hoe guide grinders
  • BREWCO FL136 portable grinder
  • BREWCO portable band welder
  • (3) variable speed dual guide grinders
  • BARNHARDT bandmill wheel grinders
  • keyknife knife clamps & supplies
  • ARMSTRONG swages & shapers
  • 19" & 30" round saw anvils
  • New SIMONDS, PACIFIC HOE headrig & resaw blades
  • 100's of new & used bandmill, resaw, round saw blades

KILNS, CARTS, RAILS, STICKERS, YARD LUMBER, DAY 1 & 2
  • (6) 1987 WELLONS 33'x80' steam fired computerized multi zone aluminum dry kilns, indvidually motorized kiln fans, TOSHIBA 20 hp/1175 rpm, BALDOR 1D15H450-EO adjustable speed drives, EMERSON panels, WELLONS moisture meter capacitance panels, WAGNER 683 Info-Pak, NELES pneumatic positioners, FISHER actuators, computer monitors, printers, 10'x190' kiln control house
  • (382) SHELBY tube type kiln carts, 60"x108", 42"x72" center distance on wheels
  • 360' new kiln rail
  • 1440' kiln rail
  • (48,000+) 3/4"x1 1/2"x52" kiln stickers, w/metal racks
  • Large quantity packaged fingerjointed redwood lumber, day 2 (call for list)

BOILER, FUEL SILOS, DAY 1
  • 1987 FEDERAL BOILER CO FLR 6071 wood fired water tube type boiler, 15 lb steam, 19917 MBH gross, 15463 MBH net, 64432 sq ft steam, 3307 sq ft heating surface, s/n: 68-0063
  • WELLONS cell type furnace, 15 hp forced draft air fan, 30 hp induced draft air fan, (2) WELLONS post flow fuel storage bins w/outfeed auger, chain conveyor to boiler, dual auger feed screw to single auger drop feed screw, boiler water chemical makeup tanks, pumps, boiler ash hopper, INGERSOLL-RAND T-50 compressor
  • (2) sections WELLONS boiler controls, CHESSEL Chart-O-Graph, digital readout, CLEVELAND controls, DRO, GE 8000 line 6-section MCC, (23) switches, GE main disconnect, 1200 amp adjustable breaker

ULTIMIZER/WOODEYE CUT STOCK LINE, DAY 2
  • (2) ULTIMIZER 14B cutoff saws w/INDRAMAT DDS 2.1 & MDD Digital intelligent AC servo drives, analog interface, 22' main infeed rolls, (2) 17' infeed rollcases, 16"x10' clean out conveyor, WOOD EYE scanner, (4) cameras & lasers, 16,000 counts/100", .300 photoeye to top scanner, .250 min mark spacing, 1.500 max grade change spacing, 5.000 max waste length, .100 end of board adder, 19' 4-strand H82 infeed transfer, GE 7 1/2 hp/30 rpm, 14' 4-arm tilt hoist, GE 7 1/2 hp/30 rpm w/brake, BALDOR adjustable frequency drive, 16"x22' sticker conveyor, WESTINGHOUSE 3 hp/55 rpm, 42' 3-section 8, 7, 5-strand poly top chain transfer, US gearheads, hydraulic driven feed rolls, 7 1/2 hp hydraulic unit, 18"x54" belt transfer, 18"x40" belt transfer, 120' sort system,w/ULTIMIZER III linear sorter controls, (2) 10"x120' main sort belts, (2) 24"x16', (4) 36"x12' sort belts, 3'x8' air receiver, ALLEN BRADLEY centerline 6-secton MCC, (31) switches, PC monitor, printer, GE 50 KVA transformer

DIMTER OPTICUT CUT STOCK LINE, CTD CHOP SAW LINE, DAY 2
  • (2) 1994 DIMTER Opticut 304 cutoff saws w/INDRAMAT Turbo C MAC 112 servo drives, TDM, KDS AC servo drives, AUTOMATA data terminals, (2) DIMTER mesuring stations, luminescence sensors, suspension encoder drives
  • 1995 MACHINE SYSTEMS 20' 7-strand lugged infeed transfer, 3' 9-strand crossover transfer, hydraulic feed rolls, 22' main infeed rollcase, (2) 3 1/2' 7-strand crossover transfers, hydraulic driven feed rolls, (2) 10"x60' feed thru transfers to sorter, 36"x60', 60"x14', 48"x40', 36"x22', (2) 36"x10', 10"x22', (2) 10"x40', 18"x60', 18"x44' belt transfers, w/drives 8' 7-strand, 30' 3-strand outfeed transfers, w/drives, WEBSTER 24"x40' vibratory conveyor
  • (5) CTD F205 manual chop saws, 2 1/2 hp, lasers, light stations, in & outfeed gravity rolls, 19' 4-strand H78 infeed transfer, 3 hp/30 rpm, 14' 4-arm tilt hoist, (2) 5 hp w/brake, FALK 45 rpm reducer, 1995 MACHINE SYSTEMS 40' sort system, 9' 7-strand infeed to 4' 7-strand incline transfer, 20' 9-strand lugged transfer, (5) drop chutes
  • 5'x6' dog ear line, 14"x32' infeed transfer belt, TOSHIBA 5 hp/1735 rpm, SKK 350 reducer, 5' 3-strand H78B lumber landing table, EURODRIVE 3 hp/40 rpm, 5' & 6' dog ear machine w/ 22" 5' & 6' saws, 22" RH & LH dog ear saws, 2-strand lugged/ladder feed thru chain, EURODRIVE 3 hp/40 rpm, MAGNETEK GPD 503 digital drive, (2) 6"x18" even end rolls, (2)9' single strand H78 clean out conveyors w/flites, HITACHI, TOSHIBA 3 hp/40 rpm, GE 8000 4-section MCC w/(22) switches

RECOVERY SYSTEM, DAY 1
  • MID OREGON 2-arm tilt hoist, 10' 6-saw line shaft trimmer w/24" saws, laser, 10' 3-strand lumber landing table
  • 1987 COSMEC SM320 straight line multi rip saw, 8" capacity, 50 hp, s/n: 1810, 30"x54" slowdown belt, 8' 3-strand lumber landing table, SIGNODE 700 bander, INDUSTRIAL CR500 pneumatic RH chop saw, 85' single strand H78, flites, clean out conveyor
  • MID OREGON 2-arm tilt hoist, MID OREGON 5'x16' transfer belt, 36"x40' transfer/sorter belt, custom built 10 hp straight line rip saw, INDUSTRIAL CR500 LH chop saw, (2) 3'x11' infeed transfer belts, 6"x40' sort line belt, 3'x4' scissor lift, 36' & 42' box chain clean out conveyors

REMAN & CUT STOCK EQUIPMENT, DAY 1 & 2
  • (5) 1996 MID OREGON SR4-5-HP25-440CP horizontal re rip saws, 3/4" min x 8" max cut, US 25 hp/1745 rpm, hydraulic driven infeed, outfeed and feed thru rolls, sticker belt in & outfeeds
  • 1995 ROTOLES 400D lathe, 400 mm max width, 150 mm max height, 50 mm min length, 8 mm max cut, 84/sec cutting speed, 6-30 mm infeed speed, (32) knives, 20 kw, 15" feed thru belt, 12"x6' infeed belt, s/n: 2805
  • 2000 MID OREGON LCF 16' hydraulic moulder feed table, 4' bridge, dual feed rolls,, s/n: 991129123
  • TIMESAVER 1140 Speedbelt sander, single top head, 75 hp, s/n: 4194
  • (2) TIMESAVER 32" top & bottom head sanders
  • AEM Sandingmaster 2 top head sanders, s/n: MO1155
  • CHALLONER 720 double end tenoner, 8' capacity, (8) heads, (2) 10 hp, (4) 5 hp, (2) 7 1/2 hp, s/n: 8288
  • ROCKWELL 20" vertical band saw w/pneumatic positioned fence AB-Comm controls, POWERMATIC power feed, s/n: 1542603
  • (2) INDUSTRIAL CR500 RH pneumatic chop saws
  • 1995 MID OREGON 2-arm box dump, 7 1/2 hp, brake, BALDOR adjustable speed drive, 48"x11' block transfer belt, BALDOR adjustable speed drive
  • (4) GLOBE AA436 36"x48" 4000 lb scissor lifts
  • (2) 3'x6' 6000 lb scissor lifts
  • SIGNODE 700 plastic bander w/dispenser
  • PENNSYLVANIA 700 low profile platform scale
  • DYNATECH N05-P12-24-DF-GA glue applicator w/1000 lb hot melt wax

BUILDINGS
  • 175'x440'x30' all steel bolt together building w/steel pole supports, (3) forklift doors, insulated, sprinklers, lights, approximately 89,150 sq. ft
  • 76'x214'x20' all steel bolt together clear span building, (3) forklift doors, sprinklers, lights, approximately 16,264 sq. ft
  • 75'x190'x20' all all steel bolt together clear span building, (2) forklift doors, lights, approximately 14,700 sq ft
  • All steel bolt together sawmill building, approximately 30,265 sq. ft, lights, sprinklers, partial insulation
  • 85'x210'x22' all steel kiln drying shed, insulated, approximately 17,850 sq. ft
  • All steel bolt together reman building, approximately 12,440 sq. ft, sprinklers, lights
  • 35'x35'x35' all steel bolt together boiler building, sprinkers, lights, approximately 1225 sq. ft

ELECTRICAL, DAY 1 & 2
  • GE 1500 kva pad mount transformer, 12000 to 480y/277volts
  • SQUARE D 1500 kva pad mounted transformer, 12470 to 480y/277 volts
  • GE 1000 kva pad mounted transformer, 12470 to 480y/277 volts
  • (2) MGM 1000 kva pad mounted transformers, 12470 to 480y/277 volts
  • 1994 ABB 1000 kva pad mounted transformer, 12,000/20780 grdy/12,000 to 480y/277 volts
  • GE AV line switchboard, 1-section 1200 amps w/800 amp adjustable trip breaker
  • GE AV line switchboard, 1-section, 2000 amp power breaker
  • GOULD 1200 amp 1-section main breaker
  • ITE 1200 amp, 600 volt vacuum breaker
  • GE 8000 + 8-section MCC w/(4) switches
  • GE 8000 7-section MCC w/(30) switches
  • (5) GE 8000 6-section MCC's w/(29), (24), (23) switches
  • GE 8000 5-section MCC w/(22) switches
  • (2) GE 8000 4-secton MCC's w/(16), (9) switches
  • GE 8000 3-section MCC w/(16) switches
  • GE 8000 2-section MCC w/(4) switches
  • 6-section MCC w/(30) switches
  • GE 7700 3-section MCC w/(11) switches
  • (2) AB SLC 5/03 CPU w/EATON 10T panel mate
  • AB SLC 5/03 CPU
  • Large quantity of transformers to 300 kva
  • starters to size 6
  • breakers to 1200 amp
  • (2) SAFTRONICS C1MR-HY7 drives
  • MAGNETEK GPD503 digital drive
  • Plus: mill lighting, fuses, foot pedals, mill intercoms, INTERMEC 4300 & 9560 bar code printers, ribbons

LOG DECKS, LOG HAULS, TRANSFERS, CONVEYORS, DAY 1 & 2
  • Decks & Hauls: (2) 34' 3-strand H150 log decks, S drive, 25 hp, FALK reducer
  • 26' single strand C150 log haul, 30' log sweep, S drive, 5 hp, reducer
  • 44' single strand H150 log haul, 6-arm log stop & loader, S drive MITSUBISHI 5 hp, WESTERN reducer
  • Lumber Transfers: 110' 2-section 5-strand 4" rolltop green chain, EURODRIVE 7 1/2 hp
  • 94' 2-section 6-strand 4"rolltop green chain, (2)drives
  • 63' 5-strand 4" rolltop green chain, EURODRIVE 5 hp
  • 135' 3-section 6 & 7-strand H78, (3) EURODRIVE 5 hp
  • 56' 12-strand H78
  • 38' 8-strand H78, FALK reducer
  • 36' 6-strand H78B, SM CYCLO
  • 32' 6-strand H78, SM CYCLO 5 hp
  • 20' 6-strand H78, SM CYCLO 5 hp
  • 18' 7-strand H78B, SM CYCLO 5 hp
  • 18' 6-strand, EURODRIVE 7 1/2 hp
  • 18' 5-strand H78, GE 5 hp
  • (2) 17' 7-strand H78B, EURODRIVE 3hp
  • 16' 7-strand H78, reducer
  • 16' 5-strand H78, RELIANCE 5 hp, FALK reducer
  • (2) 16' 5-strand H78B, SM CYCLO 5 hp
  • 16' 5-strand H78, TOSHIBA 10 hp, FALK reducer
  • Chain Conveyors: (7)32'- 200', 8" long link conveyors,5-25 hp, (4) w/FALK reducers
  • (9)22'-60'box chain conveyors, 22'-60' 3 & 5 hp(3) w/reducers
  • 20' 3-strand H78 conveyor, 3 hp, reducer
  • 19' single strand H78 conveyor, TOSHIBA 5 hp, FALK reducer
  • Belt Transfers: 24"x51', BAUER motor
  • 30"x30', SKK 7 1/2 hp
  • 18"x30', TOSHIBA 5 hp, reducer
  • 6"x25'
  • (2) 18"x21', TOSHIBA 5 hp, FALK reducer
  • 15"x25', SKK 3 hp
  • 24"x14'
  • 5-strand 6"x10', EURODRIVE 5 hp

FIRE SYSTEMS, TANKS, DAY 1 & 2
  • CUMMINS Triple Nickel diesel engine, AMARILLO right angle gear drive, METRON FD2-BCP fire pump controller, diesel tank, 50 hp
  • 5000 gal diesel fuel tank
  • 1000 gal gas fuel tank
  • 1000 gal used oil tank
  • (2) 10,000 gal, (4) 5000 gal, 3000 gal water tanks
  • (2) CON AIR controlled air water tanks

SHOP EQUIPMENT & TOOLS, DAY 1 & 2
  • 22"x50" lathe
  • JOHNSON J band saw
  • 20 ton hydraulic press
  • JET, CENTRAL 17", 18" drill presses
  • JET, MILWAUKEE double end grinders
  • pipe threaders
  • (7) MILLER Gold Star 400SS welders
  • TANAKA KT160 portable torch
  • welding leads
  • anvil
  • DRESSER load lifter 5 ton underslung electric pendant hoist
  • LANDA trailer mounted steam cleaner
  • 10 hp compressor
  • CRAFTSMAN radial arm saw
  • pallet jack
  • COFFING, YALE, BUDGIT chain hoists
  • shop heaters
  • air hoses
  • RIDGID 700 threader(2) CLIMAX key mills
  • OTC porta power
  • MILWAUKEE porta band saw
  • air tools
  • sand blast pots
  • SIGNODE banders
  • SWEDE scrap chopper
  • air receiver tanks
  • portable pump
  • motors to 350 hp
  • reducers
  • hydraulic units
  • diamond plate walkways
  • catwalk & stairs
  • steel tables
  • lumber crayons
  • hydraulic & air hoses & fittings
  • sprockets
  • machinery parts & equipment
  • wire fencing
  • PVC & metal pipe
  • hardware
  • chain
  • pineapple rolls
  • belts
  • bearings
  • forklift parts & equipment
  • too much more to list!!

TERMS & CONDITIONS
  • 7% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Monday, April 19.
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.

  • Due to safety & insurance reasons, persons under 12 not admitted.
  • Washington Auctioneers License #48
  • CA Bond #445652C

LODGING(Fortuna, CA - 20 miles north of auction site)
    SUPER 8707-725-2888
    BEST WESTERN707-725-6822
    COMFORT INNS707-725-7025
    HOLIDAY INN EXPRESS707-725-5500

AIRPORTS & CAR RENTAL
  • San Francisco International Airport is served by all major airlines and rental car agencies
  • Eureka/Arcata Airport is served by Alaska Airlines and United Airlines. Rental cars are available.

ORDER OF SALE
  • DAY 1
  • LARGE LOG MILL
  • PLANER
  • REMAN & CUT STOCK EQUIPMENT
  • KILNS
  • BOILER
  • SHOP EQUIPMENT
  • STORES
  • BUILDINGS

  • DAY 2
  • REMAN & CUT STOCK EQUIPMENT
  • PLANERS
  • SHOP EQUIPMENT
  • STORES
  • BUILDINGS

DRIVER DIRECTIONS
  • From Eureka/Arcata airport, McKinleyville, CA, drive south on Hwy 101 approximately 55 miles to 2nd Redcrest exit.
  • From San Francisco International airport, drive north on Hwy 101approximately 220 miles to Redcrest/Holmes exit.
  • Mill site is approximately 1/2 mile from either exit

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide