James G. Murphy Co.





Back to Top
Auction Schedule Company Overview Advance Bid
Central Point

9AM - TUESDAY - APRIL 24
Preview 10am to 4pm, Monday, April 23
594 S Front
Central Point, OR

Past Auction - held in 2001

Auction Catalog Lots 1-526

Auction Catalog Lots 527-1210

X Item Catalog

DEBARKER
  • SALEM MKII 35" 5-arm ring debarker, (2) LINCOLN 60 hp/1175 rpm ring drives, GENCO 50 hp/1200 rpm dc feed drive, LINCOLN 60 hp MG set, 30 hp hydraulic unit, in & out hold downs, oiler, cab & controls, spare parts

CUT-OFF SAWS
  • (3) 60" hydraulic operated cut-off saws, 200 hp drives, hydraulic driven hourglass rollcases, kickers & log stops, 50 & 75 hp hydraulic units, MITSUBISHI PLC, cab & controls, spare saws & parts

LOG CARRIAGE/CARRIAGE DRIVE
  • 1989 KLAMATH THD-H-LH 42" 2-knee TEMPOSONIC positioned log carriage, tong & finger clogs, cant flippers, 38-1/2" knee travel, (2) trucks, 62-1/8" track centers, pantograph, rail, APPLIED THEORY carriage maximizer, top & bottom scanner bars w/(32) eyes, computerized controls, cab & controls, spare parts, s/n:572
  • RELIANCE 75 hp MG set, WESTINGHOUSE 50 hp carriage drive, drum & cable

BANDMILL
  • ALBANY DC-LH-BM 7' double cut bandmill, mechanical strain, slat bed chain, 250 hp drive, spare parts

SLABBER
  • CM&E 64 8-knife TEMPOSONIC positioned slabber, TOSHIBA 150 hp/1200 rpm drive, IGGESUND turn knife conversion

QUAD BANDMILL/HORIZONTAL & VERTICAL RESAW
  • TURNER 52" quad bandmill, (4) G.E. 50 hp/1765 rpm drives, both sides set, mechanical strain, hydraulic driven 8' log centering rolls, sharp chain w/(2) 20"x84" outfeed belts, TECO 5 hp/150-1500 rpm dc drive, PFS 25 hp hydraulic unit, cab & controls, s/n: C3883
  • TURNER 52" quad frame & spare parts
  • 1987 CETEC 5' single band horizontal resaw, TECO 150 hp/1750 rpm drive, closed loop servo, hydraulic bandmill strain w/TECO 7.5 hp/1750 rpm motor, SERVO hydraulic setworks, TEMPOSONIC positioning, setworks accuracy +/- 0.002 inch, 12"x30"x13-«' max. cap., 2"x3"x7'6" min cap., 0-300 fpm, auto bandsaw tracking system, infeed tailbar, hydraulic driven in & outfeed rollcases, chromed bed rolls, RUCKER 30 & 40 hp hydraulic units, controls & electrics, spare parts
  • MCDONOUGH 54" vertical resaw w/6' line bar, WAGNER 60 hp drive, powered pinch rolls, RUCKER 15 hp hydraulic unit, controls, spare parts

EDGERS
  • MCGEHEE 6"x72" splined single bottom arbor gang edger, TOSHIBA 300 hp arbor drive, US 150 hp arbor drive, feed thru rolls w/(2) LINCOLN 20 hp drives, PACIFIC hoe guides, sawguide lubrication system, clam shell opening, press rolls, (16) LACEY HARMER mini lasers, controls, spare parts, s/n: 7007
  • SCHURMAN 4DAS48 4"x48" splined single bottom arbor edger, WESTINGHOUSE 125 hp arbor drive, in & outfeed powered rolls, press rolls, PACIFIC hoe guides, controls, spare parts, s/n: 883

STICKER STACKERS/TILT HOIST
  • LSI auto sticker stacker w/(5) sticker pockets, 18' 2 section, 2-strand infeed w/drives, board dealers, 2- arm mechanical lumber hoist, 60' 2-strand outfeed transfe, drive, controls
  • JAYBEE auto sticker stacker w/(2) sticker pockets, 10' 3-strand infeed belt transfer, hydraulic drive, skate rolls, board dealers, hydraulic operated 3-arm lumber hoist, 20' 3-strand outfeed transfer, drive, 70 hp hydraulic unit
  • Shop built sticker stacker, in & outfeed transfers, mechanical 2-arm lumber hoist, controls
  • JAYBEE 8' 2-arm hydraulic operated tilt hoist, controls

BANDING STATION
  • SIGNODE 1544A banding station, top & side squeeze, strap dispenser, air bander, JAYBEE 10' infeed rollcase w/(5) 8"x56" rolls, 12' 3-strand transfer, hydraulic drives, 20' 2-strand outfeed transfer, hydraulic drives

P.E.T. TRIMMER/WAX STAMPING UNIT/HULA SAW
  • SALEM 8' P.E.T. saw w/(2) 20" saws, 27' 2-section, 2-strand lugged feed thru transfer, drives, even end rolls, C.O. belt, drive, 28' 2-strand outfeed transfer, drive, controls, spare parts
  • SALEM wax & stamping unit w/16' 2 & 3-strand infeed transfer, TECO 5 hp/150-1500 rpm dc drives, even end chain & rolls, drives, controls, spare parts
  • Shop built air operated hula saw system, belt transfer, drive, gravity rolls, stops, 16' 2-strand infeed transfer, drive, 16' powered table, controls, spare parts

HAMMER HOG/CHIPPER/HAMMER MILL/METAL DETECTORS
  • JEFFREY 45WB hammer hog, TOSHIBA 300 hp/1185 rpm drive, spare parts, s/n: 11854
  • BC SUMNER 66" 8-knife chipper, horizontal feed, bottom discharge, hood cylinder, TOSHIBA 250 hp/880 rpm, spare parts, s/n: 4126-76
  • JEFFREY 12"x20" hammer mill
  • RENS PL900 portable whole log metal detector
  • (2) RENS metal detectors

CHIP BINS/SURGE BIN/CYCLONE/TRAILER LOADERS
  • (2) PEERLESS 40-unit hydraulic operated chip bins, cross over conveyor w/drive
  • (2) CAROTHERS 32-unit hydraulic operated chip bins, cross over auger w/drive, hydraulic unit
  • WEST COAST 30-unit hydraulic operated chip bin, hydraulic unit
  • PEERLESS 20-unit air operated chip bin
  • WIG WAG chip car loader w/frame
  • MOORE approx. 8,000 lb trailer loader w/electrics
  • RADER 10'x10' surge bin w/auger & drive
  • Low & high pressure blow pipe

BLOWERS/FEEDERS/CHIP SCREEN
  • ARCHER 10"x24" high pressure blower, TECO 60 hp, baffle
  • ARCHER 8"x18" high pressure blower, motor
  • 1998 WESTERN PNEUMATICS 20"x30" feeder, TECO 5 hp
  • RADER 20"x24" feeder, motor
  • Quantity of material blowers to 60", 125 hp

COMPRESSORS/AIR DRYER/TANNER TANKS/AIR RECEIVERS
  • QNW1251-B rotary screw compressor, US 250 hp, 200 psi, s/n: 770300
  • QNW410E rotary screw compressor, LINCOLN 100 hp, 200 psi, s/n: 71224
  • WILKERSON A14-HH-P00 refrigerated dryer
  • (2) FROSTO tanner tanks
  • (3) air receivers
  • Compressors to 15 hp

PLANER/PINEAPPLE FEED/PLANER FEED TABLE/MOISTURE METERS
  • WOODS 415M planer, 6"x15", (4) heads, (12) knives, 60 hp top head, 30 hp bottom head, 20 & 50 hp side heads, (4) hydraulic driven top & bottom infeed rolls, (2) top & bottom hydraulic driven outfeed rolls, PFS 100 hp hydraulic unit, controls, spare heads, WOODS 415M frame, s/n: 25676
  • 10' hydraulic driven single pineapple feed table w/(1) KNURLED rolls & (3) 8-1/2"x30" rolls
  • SALEM 30' hydraulic driven planer bridge w/(14) 10-1/2"x16" rolls
  • 2000 WAGNER 750 in-line moisture meter, auto zero, CALROM installed, power conditioner w/WAGNER 146 end to end sensor & dual marker system, 3.5"x12" max., 3/4"x3-3/4" min. board dimensions
  • (2) WAGNER L612 moisture meters w/WAGNER L712 stack probe moisture meter
  • LIGNOMAT Lignomaster moisture meter
  • WAGNER 778 moisture detector
  • WAGNER 816 kiln controller

KILNS/BOILERS/COOLING SHEDS/CARTS
  • (2) 1995 IRVINGTON MOORE 32'x104' double track steam fired kilns, IRVINGTON MOORE & WELLONS computerized multi-zone controls, 15-7.5 hp fans per kiln, aluminum construction, 8-1/2'x64' control house, piping, spare parts
  • (2) MOORE OREGON 64' double track steam fired kilns, concrete block & aluminum construction, WAGNER 816 kiln controller, WAGNER 778 moisture detector, electrics
  • (2) NUYLE 108' dehumidification kilns, concrete block/aluminum construction, (5) DAYTON 16" spark resistant fans, controls & electrics
  • CLEAVER BROOKS CB428-700 natural gas fired boiler, (rebuilt & installed in 1995), 700 hp, 200 psig, 23,430,000 btu/hr output, auto ignition, non-premix gas burner, rotary air damper, 4 pass construction, s/n:42073, w/INGERSOLL RAND 15 hp compressor, (2) 10 hp condensate pumps & tank, KISCO tanks, LMI Liquitron D500 digital timer, (2) SEAMATIC dual accumulator timers, (4) LMI dosing pumps, controls & electrics
  • SEATTLE BOILER WORKS LPS715 natural gas or diesel fired boiler, 15 psig, industrial combustion burner
  • 80'x130'x22' all steel clear span cooling shed
  • 65'x70' all steel clear span cooling shed
  • 40'x110' wood framed metal roof, clear span cooling shed
  • Large quantity of kiln rail, (200+) assorted size kiln carts, approx. (100,000) 3/4"x1-3/8"x54" kiln sticks w/carts

VIBRATORY & BELT CONVEYORS/CHAINS & BELT TRANSFERS/ROLLCASES/MOTORS/REDUCERS
  • 18"x150' vibratory conveyor w/drive
  • 18"x85' vibratory conveyor w/drive
  • 24"x16' vibratory conveyor w/drive
  • 54"x8' vibratory conveyor w/drive
  • chain & belt transfers to 300' w/drives
  • chain & belt conveyors to 200' w/drives
  • rollcases to 45' w/drives
  • SKK, SM CYCLO, HITACHI, MITSUBISHI, G.E., WESTINGHOUSE, TECO, FALK motors & reducers

FILING & GRINDING ROOM
  • (2) ARMSTRONG #4 RH bandsaw sharpeners
  • ARMSTRONG #4 LH bandsaw sharpener
  • ARMSTRONG #5 stretcher roll
  • ARMSTRONG # 4 stretcher roll
  • ARMSTRONG 3-10 stretcher roll
  • WRIGHT HD350 sharpener
  • IMW 240 guide grinder
  • THOMPSON H2B guide mill
  • Alligator stellite tipper
  • Alligator stellite side grinder
  • BELL IND. stellite grinder
  • HANCHETT DN48 knife grinder
  • CM&E #41 bent knife grinder
  • ARMSTRONG #16 & #25 sharpeners
  • JONES ORTH side head grinder
  • Large quantity of planer heads, round & bandsaws, 500 lb babbit pot, anvils, swages, planer steel, key knife stock, new SYSTIMATIC saws, much, more

ELECTRICS
  • (2) SAFTRONICS EZ6-240 Solid State starters, 150 hp, 230 volt
  • (2) SAFTRONICS CA-260 Solid State starters
  • (4) SAFTRONICS EZ6-80 Solid State starters, 50 hp, 230 volt
  • 1999 SAFTRONICS 250 hp Solid State electronic brake
  • ALLEN BRADLEY Smart motor controller
  • ALLEN BRADLEY SLC501 CPU
  • VICKERS digital process servo controller
  • (2) MITSUBISHI F2-60M PLC's
  • ALLEN BRADLEY 3 section MCC w/(12) switches
  • SQUARE D 7-section MCC w/(34) switches
  • SQUARE D 6-section MCC w/(25) switches
  • SQUARE D 5-section MCC w/(19) switches
  • SQUARE D 2-section MCC w/(9) switches
  • SQUARE D 1-section MCC, 1200 amp
  • SQUARE D 1-section MCC, 1000 amp
  • SQUARE D 600 amp I-line panel board w/(1) 400, (2) 250, (2) 200, (1) 100 amp adjustable trip breakers
  • (4) SQUARE D size 5 reduced voltage starters
  • ALLEN BRADLEY size 5 reduced voltage starter
  • (4) SQUARE D size 4 starters
  • (9) SQUARE D size 3 starters
  • (13) SQUARE D size 2 starters
  • ALLEN BRADLEY, SQUARE D, CUTLER HAMMER, WESTINGHOUSE, ITE disconnects to 800 amp,
  • adjustable trip breakers
  • transformers to 25 kva
  • capacitators to 50 kvar
  • large quantity of fuses, heaters, sensors, TEMPOSONICS, and more

SHOP EQUIPMENT/TOOLS/MILL SUPPLIES/YARD EQUIPMENT
  • WELLSAW 1118 horizontal metal cutting bandsaw, s/n: 2823
  • DELTA 70-200 20" drill press, T-slotted base & table
  • TAFENGLONG 14"x36" engine lathe, 3 jaw chuck
  • ORBIT 16" 16 spd drill press
  • arbor press
  • RIDGID 300 pipe threader
  • MILLER Dimension 452 dc welder w/wire feed
  • MILLERMATIC 185 cv/dc welder
  • (2) LINCOLN wire feed welders
  • LINCOLN gas arc welder
  • (4) bullet welders
  • quantity of welding rod, wire & lead
  • (8) oxy/acetylene sets w/carts
  • PARKER KARRY crimper w/dies
  • LANDA steam cleaner
  • SWEDE 505 scrap chopper
  • (3) SIGNODE air banders
  • (3) SIGNODE hand banders
  • (3) SIGNODE banding carts
  • large quantity of banding tools & banding
  • (5) D.E. pedestal grinders
  • PROTO 1" drive, 1/2"-1" drives; impact & regular sockets to 1"
  • PROTO wrenches to 1-1/2"
  • other wrenches to 2"
  • PROTO torque multiplier
  • PROTO wheel pullers & others
  • porta power
  • MILWAUKEE portable bandsaw
  • STIHL 066 chain saw
  • STIHL 36" chain saw
  • STIHL gas weed eater
  • (2) 1-1/2 ton chain falls
  • (2) 350,000 btu shop heaters
  • testing equipment
  • 13 drawer rollaway w/tools
  • parts washer
  • 14" cut-off saw
  • floor jack
  • JET DC650 dust collector
  • (10) laser lights
  • (4) PANASONIC TRC990 monitors
  • large quantity of in-use cameras & monitors
  • new SYSTIMATIC saws
  • heaters
  • fans
  • lights
  • bottle jacks
  • large quantity of fiberglass & aluminum step & extension ladders
  • barrel pumps
  • grease guns
  • (2) 7,500 gallon fuel tanks
  • BENNET fuel pump
  • lumber pull carts
  • log yard bunks
  • large quantity of bulk oil storage tanks
  • large quantity of bearings
  • taper locks
  • couplers
  • sprockets
  • pulleys
  • shafting
  • mill chain
  • UHMW
  • hydraulic fittings & hose
  • valves
  • belting
  • nuts
  • bolts
  • screws
  • bins
  • rail car ramps
  • and too much more to list!

ROLLING STOCK
  • 1989 LINKBELT LS4300 C Series II hydraulic log loader, 6BG1T diesel, YOUNG swivel heel boom, 28" triple grouser tracks, s/n: D2H9-5H8
  • 1988 KOMATSU PC300LC hydraulic log loader, S6D125 diesel, YOUNG swivel heel boom, 32" triple grouser tracks, s/n: 14410
  • 1986 CAT 988B rubber tire log loader CAT diesel, MEDFORD forks, BRIDGESTONE 35/65R33 tires, s/n: 50W07934
  • 1985 CAT 966D rubber tire log loader, CAT diesel, MEDFORD forks, GENERAL 26.5x25 tires, s/n: 99Y03488
  • 1980 CAT 966C rubber tire log loader, CAT diesel, MEDFORD forks, GENERAL 23.5x25 tires, s/n: 76J15570
  • 1970 CAT 966C rubber tire log loaderCAT diesel, MEDFORD forks, GENERAL 23.5x25 tires, s/n: 76J3241
  • CAT 12F motor grader, CAT diesel, 12' moldboard, UNIROYAL 13.00K24 tires, s/n: 8T10777
  • 1966 CAT D8H crawler tractor, CAT diesel, 10' U-blade, HYSTER D89A winch, s/n: 46A13836
  • JOHN DEERE 300 tractor/loader, JOHN DERE diesel, 6' G.P. bucket, 6' plow, P.T.O., DENMAN 14.9x24 tires, separate backhoe attachment, s/n: 197720-00110
  • 1988 HYSTER H135XL 13,500 lb dual pneumatic forklift, PERKINS diesel engine, 173.5" 2-stage mast, side shift, 9,419 hrs, s/n: F006A02979J
  • 1988 HYSTER H135XL 13,500 lb dual pneumatic forklift, PERKINS diesel engine, 173.5" 2-stage mast, side shift, 1,903 hrs, s/n: F006A02958J
  • 1985 HYSTER H130F 13,000 lb dual pneumatic forklift, PERKINS diesel engine, 182.5" 2-stage mast, side shift, 7,910 hrs, s/n: D006D06509F
  • 1988 HYSTER H80XL 8,000 lb pneumatic forklift, propane, 145" 2-stage mast, side shift, 0462 hrs, s/n: F005A06149J
  • 1983 HYSTER H80C 8,000 lb dual pneumatic forklift, propane, 146" 2-stage mast, side shift, 8,867 hrs, s/n: C005D23130
  • 1988 HYSTER H70XL 7,000 pneumatic forklift, propane, 145.5" 2-stage mast, side shift, 5,275 hrs, s/n: F005A06866J
  • 1988 HYSTER H70XL pneumatic forklift, 145.5" 2-stage mast, side shift, 5,859 hrs, s/n: F005A06892J
  • 1983 HYSTER H80C pneumatic forklift, 146" 2-stage mast, side shift, 5,668 hrs, s/n: C005D16699
  • HYSTER H180H dual pneumatic forklift, PERKINS diesel, 8' forks, 212.5" 2-stage mast, side shift, 1,515 hrs, s/n: C007002584G
  • CLARK dual pneumatic forklift, CAT diesel, 2-stage mast, side shift, 5,196 hrs, s/n: 12V00674
  • CLARK 30,000 lb dual pneumatic forklift, diesel, 2-stage mast, side shift, s/n: Y6851432294
  • WESTERN STAR 8972TA T/A water truck w/sleeper, CUMMINS diesel, Roadranger RTO1253 trans, dual stacks, aluminum fuel tank, approx. 5,000 gallon square tank w/pump
  • 1963 DODGE M37 3/4 ton, 4X4, 6 cyl gas, manual trans, flatbed, split windshield w/LINCOLN SA250 dc welder
  • Quantity of parts including: diesel blocks, transmissions, starters, alternators, generators, hoses, filters, brakes, electrical, radiators, bearings, seats, tires for loaders & forklifts, 10' G.P. bucket, (2) sets of pole forks, much more

TERMS & CONDITIONS
  • 7% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Wednesday, April 25.
  • A 25% deposit is required by the close of business, auction day.
  • Cash, cashiers check, Master & Visa Cards only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. All purchases must be removed 1 hour after the sale or between 8 am & 4:30 pm Wednesday through Friday, April 25, 26, 27 for small items. Large equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #48

DRIVER DIRECTIONS
  • From southbound I-5, take exit 35.
  • Turn right on Hwy 99 and drive approximately 3 miles to the auction site.

  • From northbound I-5, take exit 33.
  • Turn left onto Pine Street and drive approximately 1 mile to the auction site.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions

Registration Form | Advanced Bid Overview | Terms & Conditions


Back to Top

James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide