|
10AM - THURSDAY - AUGUST 15
Preview 10am to 4pm, Wednesday, August 14
13480 Old Redwood Hwy, Healdsburg, CA
Advance Bid Auction Catalog
Past Auction - held in 2002
|
|
REMAN EQUIPMENT
|
- STETSON ROSS 6-10A1 planer/matcher, 8"x15", (10) knives, (6) heads, hydraulic feed rolls,, 18' STETSON ROSS 511E pineapple feed table w/(8) 6"x30" spiral rolls, 50 hp hydraulic unit, controls, electrics, (20+) spare Hydrolock heads, jointer bars, yokes, s/n: 3733
- IIDA KOYGO Woodsman MH301C moulder, 12"x12", (7) heads, (8) knives, hydraulic top & bottom feed rolls, pineapple infeed table w/(3) 4"x12" rolls, (15) 4"x24" rolls, computer controls, spare heads, jointer bars, pattern knives
- MATTISON 226 moulder, 4"x12", (5) heads, (8) knives, (3) 20 hp, (2) 7.5 hp, 12"x8' infeed belt, 10 hp variable speed, controls, electrics, spare heads, jointer bars, profile knives, s/n: 21736
- TURNER 48" air strain vertical band saw, linebar, 40 hp/1800 rpm, (4) hydraulic feed rolls, in & outfeed rollcases, 20 hp hydraulics, controls, electrics
- IRVINGTON 6620 individually motorized trimmer, 20' capacity, 12', 11-strand pass thru transfer w/even ending rollcase, carry over wheels, IRVINGTON 3480 16' infeed transfer, controls, electrics
- IRVINGTON 66 line shaft trimmer, 20' capacity, 10', 10-strand pass thru transfer w/even ending rollcase, 40 hp, computer controls, electrics
- (2) 18" hula saws, 7.5 hp, 18"x24' gravity rolls, 15"x30' outfeed belt conveyor, 3 hp
- STETSON ROSS XL ripper, 28 hp, s/n: 7939
- INDUSTRIAL N510L 18" chop saw, 7.5 hp, infeed gravity rolls, gauges, stops
- MID OREGON 18" chop saw, 7.5 hp, 6"x20' outfeed belt
- WHIRLWIND 14" chop saw, 7.5 hp, infeed gravity rolls, gauges, stops
- 12' rotary sort table, 1.5 hp
- 4-arm 16' tilt hoist, 6' lift, 15 hp/30 rpm, w/brake
- (2) 4-arm 16' tilt hoists, 54" lift, 15 hp/30 rpm
- MONTGOMERY Blow Hog 26HD40BH hog, drop infeed, 100 hp/1800 rpm, w/18"x18' chevron infeed belt, 6' fiberglass trough, MDI metal detector, controls, electrics, s/n: 1858
- 1997 WESTERN PNEUMATICS 542 baghouse, TWIN CITY 490 blower, 200 hp/1800 rpm, 54" blower, 50 hp/1800 rpm, 54" blower, 20 hp/1800 rpm, WESTERN PNEUMATICS 42L 42" explosion vent & abort gate, PYRO GUARD 4-sensor spark detection & suppression system, s/n: FLT1629716280
- LSI 30-unit hydraulic chip bin, 7.5 hp
- 6' dia long neck cyclone
- (2) WELLONS 20'x52' steam operated computer zone controlled dry kilns, (4) zones per kiln, 120,000 bf, aluminum construction, kiln rail, s/n: 6826DK2
- CLEAVER BROOKS CB750-150 gas fired package boiler, 150 hp, 15 lb operating pressure, w/CLEAVER BROOKS DSI feed system, AC CSAB-90-1 water softener unit, (2) chemical feed systems, controls, electrics, 20'x30'x12' high all steel clear span building, s/n: L-38078
- NEWMAN G200 tub grinder, s/n: 200-386
- STETSON ROSS 372 pattern grinder
- NIELSEN motorized set up stand
|
|
TRANSFERS, CONVEYORS, ROLLCASES, MILL EQUIPMENT
|
- Transfers: 65', 5-strand H78, 7.5 hp/45 rpm
- 26', 5-strand WR78, 5 hp/45 rpm
- 20', 5-strand H78, 3 hp/45 rpm
- 18', 10-strand H78, 15 hp/68 rpm
- 18', 5-strand H78, 5 hp/45 rpm
- 17', 5-strand H138W, 3 hp/45 rpm
- (2) 16', 5-strand H78, 3 hp/45 rpm
- 8', 5-strand H138, 5 hp/45 rpm
- 7', 6-strand W78, 3 hp/56 rpm
- 7', 5-strand H78, 3 hp/45 rpm
- 6', 6-strand H78, 2 hp/56 rpm
- 6', 5-strand H78, 2 hp/45 rpm
- 2', 5-strand H130, 3 hp/45 rpm
- Conveyors: 18"x76", 5 hp/45 rpm
- 18"x50', 7.5 hp/155 rpm
- 18"x36', 2 hp/120 rpm
- (5) 4"x60", 3 hp
- 24"x29', 3 hp/68 rpm
- (2) 18"x26', 3 hp/45 rpm
- 12"x21", 3 hp/68 rpm
- 4"x21', 1/2 hp
- 10"x19', 1.5 hp
- (2) 18"x17', 3 hp/68 rpm
- (4) 3"x12.5', 2 hp
- 60"x11', 2 hp
- Rollcases: 60"x47', (2) 5 hp/37 rpm
- 18"x20', 1 hp
- 12"x18', 1.5 vari speed
- Mill Equipment: SWEED lumber pull
- 4'x10', 4'x8' scissor lifts
- GLOBE 3'x6' scissorlift
- SIGNODE plastic strapping machine
- QUINCY QEH 7-1/2 compressor
- WAGNER L612 w/stack probes
- (100,000+) 3/4"x1-3/4"x48" stickers
- lumber air drying bunks
- self dumping hoppers
- steel rack w/stock
- spare cylinders
- motors
- reducers
- chain
- hydraulic fittings
- sprockets
- chain
- bearings
- fasteners
- hardware
- much more
|
|
ROLLING STOCK
|
- 1951 DODGE Coronet 4-door sedan, flathead 6 cyl, auto trans
- 1983 GMC Sierra 3500 10' dually flatbed, V8, 4 spd w/headache rack
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT
: Full payment must be made by no later than 4pm, Friday, August 16.
- A 25% deposit is required by the close of business auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
- From north or southbound Hwy 101, take the Old Redwood Hwy exit south of Healdsburg.
- Drive south on Old Redwood Hwy approximately 9/10 mile to the auction site.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions
Registration Form | Advanced Bid Overview | Terms & Conditions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|
