2005 Past Auction: California Cedar Products auction, Apr. 6-7, 2005

Click small pics to enlarge

Click here for more photos

CALIFORNIA CEDAR PRODUCTS

9 am, Wednesday & Thursday April 6 & 7
Preview 10 am to 4 pm, Tuesday April 5
(Or By Appointment)
909 Old Mill Road, McCloud , CA

Past Auction held in 2005

Display Catalogs: Day 1 | Day 2 | X Lots
Downloadable PDF Catalog
Advance Bid Center

DEBARKER (DAY 1)

1981 NICHOLSON 35A2 6-arm ring debarker, TECO 75 hp/1765 rpm ring drive, 25 hp/1750 rpm to reducer, in & outfeed alligator chains, pneumatic hold downs, 20 & 30 hp hydraulic units, 5' air receiver, oiler system, CH EATON 6-section MCC w/(23) switches, building, controls, s/n: 220-30063

WHOLE LOG CUTOFF SAW, WHOLE LOG METAL DETECTOR (DAY 1)

STROM LO-72 insert tooth swing type whole log cutoff saw, LINCOLN 150 hp/1750 rpm, STROM scissor log clamps, 25 & 50 hp hydraulic units, cab, controls, spares
TELEVA MD500 hexagonal whole log metal detector, 60" coil, 24"x23' feed thru belt conveyor, controls, electrics, s/n: 998332

BANDMILLS, RESAWS, SMALL LOG PROCESSOR (DAYS 1 & 2)

1974 LETSON & BURPEE 6' Temposonic positioned vertical twin air strain sharp chain bandmill, LETSON & BURPEE Temposonic positioned segmented slabbers, 1995 INOVEC 20 Logmaster end dogging carriage optimizer w/(60) eyes, computers, controls, GE 150 hp/1180 rpm on bandmills, GE 150 hp/1150 rpm on slabbers, WESTINGHOUSE 160 hp/1050 rpm DC carriage drive to HAMILTON 60 rpm reducer, 10, 25, 40 hp hydraulic units, outfeed rollcase, (2) CH UNITROL 6-section MCC's, spares, s/n's: 20060, 20061
LETSON & BURPEE 5' Temposonic positioned twin vertical band resaw, air strain, 150 hp/1180 rpm drive, 12' linebar, (2) hydraulic feedrolls, in & outfeed slatbed chains, (2) 50 hp hydraulic units, cab, controls, electrics, spares, s/n: 2628
McDONOUGH 54" twin vertical band resaw, TECO 75 hp/1765 rpm, hydraulic strain, feed & press rolls, 7.5 & 15 hp hydraulic units, 4"x7' powered infeed belt, RENS metal detector, 9' powered outfeed rollcase w/(4) 6-1/2"x 24" rolls, spares, s/n: R541397
(2) 1981 McDONOUGH 54" vertical band resaws, 50 hp/1765 rpm, hydraulic strain, feed & press rolls, (2) 15' hydraulic infeed rollcases, (7) 8"x15" rolls, 18"x25' hydraulic outfeed belt, 16' hydraulic outfeed rollcase, (8) 8"x18" roll, (2) 7.5, 25 hp hydraulic units, 7' 7-strand H78B rooftop lumber landing table, swing arm controls, spares, s/n's: 54-1397-LT, 54-1398-RT
CONVEY KEYSTONE heavy duty porcupine log machine, 100 hp/1800 rpm bottom head, (2) 100 hp/1800 rpm side heads, 100 hp/1800 rpm top head, 50 hp/1800 rpm bottom head, 75 hp/1800 rpm horizontal saw, (3 sets) of (4) powered outfeed rolls, clean out conveyor, cab, controls, s/n: 533
Custom built canted 20" quad bandmill, (4) presizing heads, canted 3"x10' infeed belt, 10' feed section, (32) feed & press rolls, ALLEN BRADLEY Centerline 3-section MCC, (11) switches, starter cabinet, AB1305 frequency drive, WOODS E-Trac AC inverter

TRIMMERS, END STAMP MACHINE (DAYS 1 & 2)

IRVINGTON MOORE 43A LH 22' cut, 26' pass line shaft trimmer, zero fence, 60 hp/1770 rpm arbor drive, 18' 10-strand lugged feed thru transfer, (5) 8"x48" even end rolls, RELIANCE VS drive, HONEYWELL PLC, CH UNITROL, 3-section MCC, (14) switches, HONEYWELL status display, controls, electrics, spares, s/n: 16832-L
IRVINGTON MOORE 66 22' cut, 26' pass individually motorized trimmer, air lift saws, 48' section, 7, 8, 10, 11-strand lugged feed thru transfers, (6) 120" even end rolls, 25 hp hydraulic unit, CARRIER 30"x30' vibrating conveyor, 29/32 stroke, HONEYWELL IPC 620-15 processor, 623-30 status display unit, controls, electrics, spares
IRVINGTON MOORE 66 3'-20' cut, 24' pass individually motorized trimmer, 1' saw & fence, 26' 3-section 7, 9, 10-strand lugged feed thru transfers, (7) 8"x38" infeed even end rolls, (7) 8"x96" outfeed even end rolls, 36"x30' cleanout conveyor, 25 hp hydraulic unit, HONEYWELL IPC 620-15 processor, 623-30 status display unit, blower for 1' saw, controls, electrics, spares
New, never installed IRVINGTON MOORE end stamp machine, dual top & bottom rolls, single spindle stamp, (2) CLAWSEN wheel counters, adjustable fence, s/n: 21614R

TRAY SORTER, STACKERS (DAY 1)

IRVINGTON MOORE 16 tray x 225' gravity roll tray sorter, 10'-16' length, 4"-12" width capacities, 12' 8-strand infeed board waterfall, 27' 2-section, 5 & 6-strand lugged infeed transfer, (2) even end rollcases, 4-strand ladder infeed transfer to gravity rolls, tipple, 50' 4-strand lugged outfeed transfer w/tipple, HONEYWELL electrics
CONVEY KEYSTONE 20' auto stacker, 15' 8-strand infeed board waterfall, gravity roll lumber dropout gate, over & under 13' 5-strand 81X lumber transfers, 13' 5-strand H78B lumber landing table, (2) 5-arm lumber stops, 11' 6-strand H78B infeed lumber transfer, (6) lumber dealing arms, 6-arm lumber stop, even end chain, (11) pocket sticker placers, sticker transfers, 6-arm hydraulic lumber package hoist, 24' 4-strand H82 chain outfeed transfer, 20 & 25 hp CONVEY KEYSTONE hydraulic units, (5) SKK gearhead motors, EURODRIVE gearhead, FALK reducer, (3) hydraulic crives, CUTLER HAMMER Freedom 2100 4-section MCC, (17) switches, AB PLC-5/11 & HONEYWELL 620-15 processor, electrical blueprint updates, 7/95, 42'x42'x18' eaves x 35' peak all steel clear span bolt together building, lights, sprinklers
IRVINGTON MOORE 20' lumber stacker, 23' 2-section 4 & 5-strand lugged infeed transfers, (5) lumber deal arms, (2) 5-arm lumber stops, (11) pocket sticker placers, mechanical lumber lowering rollcase, (11) 10"x105" rolls, 54' outfeed rollcase w/(26) 10"x60" rolls, 5 hp hydraulic unit, controls, electrics

EDGERS, OPTIMIZER (DAY 1)

PORTLAND IRON WORKS 89 4"x36" STA optimized edger, TECO 300 hp/1750 rpm, 4-saw shifting setworks, feed drive, (2) 20 hp, 50 hp hydraulic units, 1994 INOVEC Wanemaster optimizer 20R/scanner, (10) DYNAVISION M6-17-12 lasers, 20' powered infeed chain w/positioning, hold downs, ALLEN BRADLEY 1336 frequency drive, 24' 2-section outfeed rollcase, CH EATON 5-section MCC, (175) switches, spares, s/n: 4099
PORTLAND IRON WORKS 95 slat bed 6"x326" splined top arbor edger, GE 350 hp/1175 rpm, 10 hp/1800 rpm feed drive, 4-saw shifting setworks, oiler, (4) lasers, 26' infeed , 24' oufeed rollcases, cab, controls, spares, s/n: 4088
PORTLAND IRON WORKS 89 SLA 4"x30" splined top arbor edger, TOSHIBA 125 hp/1780 rpm, 5 hp/1200 rpm feed drive, 30 hp hydraulic unit, (4) lasers, 20' infeed, 32' outfeed rollcases, edge picker, cab, controls, spares, s/n: 4099

HOG, CHIPPER (DAYS 1 & 2)

JEFFREY 56WB hammer hog, TECO 400 hp/1115 rpm/2300/4160v, drop feed, bottom discharge, SQUARE D class 8198 AC 400 hp controller, ATHENA digital display bearings monitor, 1.75"x 7.88" x 12.5" hammers, spares, s/n: 11241
MARCO 72" chipper, (6) knives, 250 hp/760 rpm, horizontal infeed, bottom discharge, controls,electrics, spares, s/n: F1739
PK PK60DB 60" 5-knife chipper, 150 hp, horizontal infeed, bottom discharge, spares, s/n: 6564B

CHIP BINS CYCLONES, BAGHOUSE, SCREEN BLOWERS, FEEDERS, SURGE BINS (DAYS 1 & 2)

PEERLESS 126 unit hydraulic chip bin, 15 hp, cross top bin auger, drive to shaft mounted reducer, electrics
PEERLESS 60 unit hydraulic chip bin, 15 hp, cross top bin auger, drive to shaft mounted reducer, electrics
(2) PEERLESS 24 unit hydraulic chip bins, 15 hp, cross top bin auger, drive to shaft mounted reducer, electrics
WESTERN PNEUMATICS 156' diameter long neck cyclone
MURPHY 10C10-D baghouse w/(4) 10' bags, s/n: 1295
KOCKUMS KS77 2-deck shaker screen, 7'x7', TOSHIBA 5 hp/1150 rpm, s/n: 018004
SUTORBILT 12"x20" blower, AC 50 hp, silencer
DRESSER 12"x25" blower, LINCOLN 75 hp, silencer
(2) CAROTHERS 24"x24" chip feeders
8'x16'x24' surge bin w/ 2-strand box chain outfeed, drive
Large quantity high & low pressure blowpipe

COMPRESSORS (DAYS 1 & 2)

1998 QUINCY QNW 1271-D/S 250 hp rotary screw air compressor, 100 psi, 1269 scfm, air cooled, constant speed control package, oversized air cooler aftercooler, 17596 hrs, s/n: 980492C
1983 QUINCY QNW 240-B2 50 hp rotary screw air compressor, 125 psi, 211 scfm, s/n: 830391
SULLAIR 25-150L 150 hp rotary screw air compressor, 110 psig, s/n: 14423AG
GENERAL 12220 air dryer, 200 psi, 1100 scfm
(10) air receiver tanks

PLANER, MOISTURE METER (DAY 2)

STETSON ROSS 6-12-A1 planer/profiler, 8"x15", (6) heads, 12-knife, 100 hp top head, 50 hp bottom head, 40 hp side heads, 50 hp top profile head, 40 hp bottom profile head, hydraulic planer feed rolls & head travel, STESON ROSS 505BE 20' hydraulic triple pineapple feed table w/(3) 8"x30" sprial rolls, (3) 8"x30" smooth rolls, STETSON ROSS 20' hydraulic planer bridge, (2) underbrush rolls, (5) 10-1/2"x16" spiral rolls, RENS metal detector, 18"x60" variable speed outfeed belt, SAFTRONICS G3+, 100 hp & 150 hp adjustable frequency drives, (2) planer doctor jointers, (15) profile yokes, log profile head, controls, electrics, (60+) spare heads, planer steel, spares, s/n: 2830
2001 WAGNER 750M218 sideways moisture detector, (3) 18" sideways sensors, WAGNER Info Pak Plus, remote keypad, terminal, s/n: 750-173

LUMBER HOISTS (DAYS 1 & 2)

72" 5-arm tilt hoist
48" 5-arm lumber package hoist, 20 hp hydraulic unit
(4) 48" 5-arm lumber package hoists

KILNS, BOILERS, CARTS, RAILS, COOLING SHED (DAY 2)

(5) IRVINGTON MOORE CRT 36'x104' steam fired double track kilns, zone controlled, w/(3) zones per kiln, line shaft driven, (13) fans, GE 75 hp/1170 rpm, (2) additional steam vents, IRVINGTON MOORE cycle & kiln controls, COE, OMEGA recorders, FOXBORO valves, CUTLER HAMMER electrics, HAS condensate pump system, SAFTRONICS pump controls, (2) G3+ adjustable frequency drives, 10'x180' kiln control house, piping, valves
1972 CLEAVER BROOKS D52 package water tube steam boiler, 30,000 lb/hr, 10-12 psig low & 120 psig high operating pressures, 35994 pph, 260 psig max, 2428 sq ft heating surface, 440' water walls, HURST Oxy-Miser deaerator, high-low pressure mods in 1996, s/n: WL-1823
1968 CONTINENTAL E152A600C auto boiler, oil or gas, 150 lbs working pressure, 2501cfw gas, 180 gph oil, 200085 mbtu/hr, s/n: K319630
110'x150' all steel supported cooling shed
(200+) 4'x8' tube type kiln carts w/2'x5' centers
3600'+ kiln rail

FILING & GRINDING ROOMS (DAYS 1 & 2)

(3) ARMSTRONG #4 RH band saw sharpeners w/AGET Dustkops, s/n's: 10446, 10035, 6705
(4) ARMSTRONG #4LH band saw sharpeners w/AGET Dustkops, s/n's: 10454, 10455, 15930, 6637
ARMSTRONG #5 stretcher roll w/anvil & bench, s/n: 13200
(3) ARMSTRONG #4 stretcher rolls, w/blade welders, anvil, bench, s/n's: 14771, 10544
(2) ARMSTRONG #2LH band saw sharpeners, s/n's: 15993, 12782
ARMSTRONG #25 circle saw sharpener, s/n: 10080
ARMSTRONG #54 circle saw sharpener
(2) ARMSTRONG 3-10C stretcher rolls, s/n's: 12814, 11310
ALLIGATOR RECSTAR dual side grinder w/SYSMAC S6 PLC, s/n: 7043
ISELLI Type SAA stellite tipper w/SELECTRON PLC controls, ISELLI SEM-TA side grinders, s/n's: 808588, 403228
McDONOUGH guide grinder, s/n: BDM431
IMW 240 edger guide grinder w/MINARIK 2000 motor controller
IMW edger guide grinder w/BOEHM motor controller(UKIAH specs)
REFORM AR21 travelling head knife grinder w/mag chuck, s/n: 445790
WRIGHT W150HDE auto facer, s/n: 599
VOLLMER DORNHAM Finimat 1-800 auto top & facer, s/n: 3428
VOLLMER DORNHAM Finimat 4-800 auto top & facer, s/n: s/n: 3417
VOLLMER DORNHAM Finiduo B1000TS auto grinder, s/n: DBGM6908836
VOLLMER DORNHAM Finiduo 2-800 auto side grinder, s/n: 4214
HANCHETT 38LG travel bed knife grinder, s/n: 84
STETSON ROSS 372 profile grinder
Assortment of filing & grinding room equipment including: ARMSTRONG, ACME hand gummers
NIELSEN K200 saw sharpener
EVANS Peelcoat saw dip tank w/arbor
BARNHARDT grinder
saw dip tank
(12) anvils to 30"
saw frequency analyzer
tension gauge grinder
PACIFIC PSK1120 saw stand
spare 72" insert tooth saws
hundreds of headrig, resaw, trimmer, edger, chop saw blades
chipper & slabber knives
hog hammers
ARMSTRONG 5242/18 swage
(2) #1 swages
(3) 5500 shaders
WHIRLWIND/SIMPLEX dual arbor set up stand
D.E profile grinder
WAAGE MP40-A-62 babbit pot

TRUCK SCALES (DAY 1)

MURPHY 200,000 lb x 1 lb load cell type scales,11'x70' steel deck, (2) RICE LAKE INDUSTRY IQ Plus digital weight indicators, (2) RICE LAKE INDUSTRY SP2000 ticket printers, digital readerboard

LOG YARD PUMP SYSTEM (DAY 1), POND PUMP SYSTEM (DAY 2)

(5) CORNELL 5RB196 pumps, 8" in/6" out, TECO 75 hp/1775 rpm, (2) SAFTRONICS CIMR-P5U4045 solid state motor controller, digital operator interface(880 & 7725), s/n: 131195
(2) SAFTRONICS EZ6 solid state starters, 7106 & 168 hrs, 10 hp prime pump, INGERSOLL RAND T-30 compressor, 20'x40'x10' high building
CORNELL 6RBF18 pump, 10" in/6" out, TECO 125 hp/1775 rpm, DANFOSS VLT 5000 aqua adjustable frequency drive, PLC, electrics, (2) 10 hp, secondary pumps, INGERSOLL RAND T-30 compressor, 14'x18'x11' high building

ELECTRICAL (DAYS 1 & 2)

Auctioneers note: The GENERAC 1020 kw generator previously listed has been removed from the auction.
(3) CUTLER HAMMER 2000 amp single section switchboards
CUTLER HAMMER EATON 11-section MCC w/(44) switches
CUTLER HAMMER EATON 8-section MCC w/(26) switches
CUTLER HAMMER EATON 7-section MCC w/(25) switches
CUTLER HAMMER EATON 7-section MCC w/(23) switches
CUTLER HAMMER EATON 6-section MCC w/(15) switches
CUTLER HAMMER EATON 6-section MCC w/(10) switches
CUTLER HAMMER EATON 5-section MCC w/(21) switches
CUTLER HAMMER EATON 5-section MCC w/(20) switches
CUTLER HAMMER EATON 5-section MCC w/(15) switches
CUTLER HAMMER EATON 5-section MCC w/(12) switches
CUTLER HAMMER EATON 5-section MCC w/(10) switches
CUTLER HAMMER EATON 4-section MCC w/(24) switches
GE 4-section MCC w/(21) switches
CUTLER HAMMER EATON 3-section MCC w/(14) switches
CUTLER HAMMER EATON 3-section MCC w/(10) switches
CUTLER HAMMER EATON 3-section MCC w/(9) switches
(2) CUTLER HAMMER EATON 2-section MCC w/(12) switches
CUTLER HAMMER EATON 2-section MCC w/(11) switches
GE 2-section MCC w/(9) switches
(3) GE 1000 kva pad mounted transformers, 2400v primary, 480/277v secondary
GE 500 kva pad mounted transformers, 2400v primary, 480/277v secondary
(5) GE 167 kva pad mounted transformers, 2400/4160v primary, 240/480v secondary
Assortment of starters to size 5, breakers to 1200 amp, disconnects, switches, relays, foot pedals, conduit, conduit fittings, wire, test meters, PLC components, lights, ballast, bulbs, transformers, mill wire, much more

CONVEYORS, LOG DECKS, LOG HAULS, TRANSFERS, ROLLCASES

REX CARRIER 24"x83', 24"x72', 24"x69', 24"x50', 24"x34', 24"x25' vibratory conveyors
large quantity of chain in use throughout mill @ 70% life remaining
(10+) log decks & hauls to 40'
(50+) chain & belt transfers to 215'
(50+) chain & belt conveyors to 245'
(20+) rollcases to 200'

MILL EQUIPMENT, SHOP EQUIPMENT & TOOLS

JET 12"x36" engine lathe, s/n: L81-10-200
GIDDINGS & LEWIS 16"x72" engine lathe
CARTER & SNYDER 24" drill press
WILTON 15" drill press
CRAFTSMAN 17" drill press CM 14" drill press
ROCKWELL 17", 14" drill presses
ATLAS 15" drill press
KRW 37F 75 ton shop press
double end grinders
MERCURY 16" chop saw
WILTON 7000 20" horizontal band saw
JOHNSON J horizontal band saw
CM, JET 1 ton hoists
COINMASTER 6000D metal detector
RIDGID 535, 400 pipe threaders
KOIKE track burner
oxy acetylene sets
welding lead
(2) DAYTON 8" bench grinders
JET #3 arbor press
oil tanks
pumps
reels
10 & 5 hp air compressors
floor jacks
COATS RC10A rim clamp
tires
chains
LINCOLN tire jack
gantry crane w/CM 2 ton chain hoist, (2) MILLER MPE 45 welders w/wire feed
MILLER SRH 333 welder
(3) MILLER Dialarc 250 welders
(4) LINCOLN Idealarc 250 welders
LINCOLN Idealarc 225 welder
LINCOLN SAE 400 welder
Coil- O-Crimp hose crimper
CAT type fitting crimper
vises
GRIZZLY G4000 9"x20" bench lathe, s/n: 321373
GRIZZLY 1" belt/6" disc sander
CRAFTSMAN 10" radial arm saw
DELTA, CRAFTSMAN 10" radial arm saws
DELTA 10" mitre saw
CRAFTSMAN 10" tilting table saw
HARRON, RICKARDO & McCONE 14"x60" lathe
AIRCO Dual 600 welder
fuel tanks
industrial intercoms
oil transfer pumps
flammables cabinets
brass stock & steel inventory
(70+) boxes new chain
shop heaters
hydraulic units
clean up tools
lasers
YALE 1 ton x 35' underslung bridge crane
antique pull carts
60" planer blower
trimmer blower
gravity & skate rolls
INDUSTRIAL chop saw
self dumping hoppers
pallet jacks
strappers & strapping
portable pumps
HOTSY steam cleaner
ROBBINS & MEYER trailer loader hoist
(500+) reducers & motors to 200 hp
ladders
lumber
(2) CAT 3408 diesel engines
CUMMINS 6 cyl diesel engine
DETROIT 6 cyl diesel engine
diesel engine parts
forklift & truck tires
log forks
buckets
desks
chairs
files
copiers
computers
office equipment
too much more to list!

SAWMILL, REMAN & CUT STOCK EQUIPMENT, NOT INSTALLED (DAY 2)

McDONOUGH 54" vertical band resaw, 8600 lb hydraulic strain, s/n: 54-139C
Custom built 26" quad vertical bandmill, 20 hp/1765 rpm, mechanical strain, power feed & press rolls
(2) LETSON & BURPEE 6' vertical bandmill wheels, columns, bases, rails, feed thru conveyor
JENKINS 15' 8-head double end tenoner, power traverse
SULLAIR 25-150L 150 hp rotary screw air compressor, 110 psig, s/n: 14432AG
RAMEY 24' hydraulic pedestal mount log loader, swivel clamshell, 15, 75 hp hydraulic units
7'x7' 2-deck chip screen
(4) custom built pencil stock machines
RAYBOND F820KW laminator, s/n: 10-250
GREENLEE 545 tenoner, s/n: 62104
HOMAG SE5000 Type KL 34/A/D edgebander
EXTREMA XP216 18" planer, s/n: 1D1562
KUHLMEYER Type FSA53 3-head sander
EFS 3600 single knife clipper, s/n: 9950 -1988
(2) DIEHL D1-405 moulders, s/n's: 10-92M15721-5136, 2-93M-5720-5136
DIEHL D58 moulder, s/n: 73M-3266-2534
VONNEGUT 12" 4-head moulder w/HF unit, s/n: 86
MARUNAKA SL150 slicer, s/n: 1041
MARUNAKA KUPER SL1 slicer, s/n: 1060
MARUNAKA GL-40M grinder, s/n: 1011
VOLLMER 5175 grinder, s/n: 15-807
DIEHL 99 gang rip saw, w/top & bottom live feed rolls, 75 hp, s/n: 54146
DIEHL SL50 straight line rip saw, 15 hp, s/n: 63-58
NEWMAN K318 gang rip saw, s/n: 12501
HERMANCE 300G 12" gang rip saw, 30 hp, s/n: 6942
(2) TRIAD AA30 window framers, s/n's: 307, 391
TRIAD T2 window framer, s/n: 381
DCE VOLKS sawdust baghouse, s/n: 136-346
Bagging, wrapping, strapping equipment & supplies

MILL BUILDINGS

Approximately 52,000 sq. ft. mill, stacker, & sorter buildings, wood frame, metal clad, w/2nd & 3rd floors, supports, catwalk, stairs, conduit, wire, air & water lines, lighting, and more
Assortment of storage, pump house and guard buildings

ROLLING STOCK

1999 CAT 980G rubber tire log loader, 350 hp 3406 diesel, 8 spd power shift trans, EROPS, s/n: 2KR01836
1993 CAT 966F Series II Logger rubber tire log loader, CAT 3306 diesel, MEDFORD forks, 22546 hrs, s/n: 15L0094
1981 CAT 966D rubber tire log loader, CAT 3306 diesel, MEDFORD bucket, 17409 hrs, s/n: 99Y01286
1986 CAT 235B track mounted heel boom log loader, 3306 CAT diesel, PIERCE boom, 24381 hrs, s/n: 8Z32140
CAT V225B 22,500 lb forklift, CAT 3208 diesel, 218" 2-stage clearview mast, side shift, 42" lumber forks, enclosed cab, s/n: 1DK0038
(2) 1991 CAT V180B 18,000 lb dual pneumatic forklifts, 3208 CAT diesel, 218" 2-stage clear view mast, side shift, 42" lumber forks, enclosed cab, s/n's: 68Y01491, 68Y01436
CAT V180B 18,000 lb dual pneumatic forklift, 3208 CAT diesel, 218" 2-stage clear view mast, side shift, 8' forks, enclosed cab, PACIFIC SCALES LNW4 Lift-N-Weigh scales
HYSTER Challenger H180H 18,000 lb dual pneumatic forklift, diesel, 212" 2-stage mast, 48" forks, MARTIN DECKER 20,000 lb x 1/2 lb scales, s/n: C0070-2411Y
CLARK C500Y1600 15,000 lb dual pneumatic forklift, diesel, 210" 2-stage mast, MARTIN DECKER 20,000 lb x 1/2 lb scales, 48" forks, s/n: Y1625-17-2850
1994 CAT DPL40 9000 lb cushion tire forklift, propane, 171" 2-stage mast, side shift, s/n: 4CN-00011
TOYOTA 02-FG32/35 8000 lb HRT forklift, propane, 144" 2-stage mast, side shift, 48" forks, s/n: 02-FG32-10100
DATSUN FG107 6000 lb pneumatic forklift, propane, 159" 2-stage mast, side shift, 54" forks, s/n: FG107-00195
1994 CAT GP25 5000 lb cushion tire forklift, propane, 188" 3-stage clear view mast, side shift, s/n: 5AM000279
1997 HYSTER H50XM 5000 lb cushion tire forklift, propane, 189" 3-stage clearview mast, side shift, s/n: D177B3B172U
TOYOTA 5000 lb cushion tire forklift, gas, 3-stage mast, side shift
ALLIS CHALMERS F50-24PS 5000 lb HRT forklift, propane, 156" 2-stage mast, s/n: 56470000
(2) ALLIS CHALMERS F40-24PS 4000 lb HRT forklifts, propane, 130" 2-stage mast, s/n's: 17711000, 17700000
DATSUN 4000 lb HRT forklift, propane
Trailer mounted diesel pump unit w/CORNELL 6RB65B4 pump, CAT 3306 diesel, 10" inlet/6" outlet
DAVEY 18M250 trailer mounted compressor w/WHITE 6 cyl diesel, s/n: 15P155-28138
MILLER Big Blue 400D T/A trailer mounted 400 amp welder/generator, diesel, s/n: KH499616
(2) HOBART GR303 300 amp trailer mounted welder/generators, FORD 200 gas engine, 637, 1484 hrs
1962 FORD F800 truck, V8, auto, w/BUCYRUS ERIE H3 Series 2 hydrocrane, 10,000 lb @ 10', 1800 lbs @ 35', 6 cyl gas, outriggers
AUTOCAR T/A water truck, CUMMINS 350 diesel, manual trans, 3000 gal tank, front, back, side spray bars, hose reel
1975 INTERNATIONAL Loadstar 1700 T/A dump truck, diesel, manual trans
PEERLESS 4186 45' 15-unit live bottom T/A trailer, canvas top
(11) yard pickups & trucks

TERMS & CONDITIONS

7% BUYERS PREMIUM
PAYMENT: Full payment must be made by no later than 4pm, Friday, April 8.
A 25% deposit is required by the close of business, each auction day.
Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
Due to safety & insurance reasons, persons under 12 not admitted.
Washington Auctioneers License #48
CA Bond #445652C

DRIVER DIRECTIONS

From north or southbound I-5, take the McCloud/Lassen Park exit(#737).
Drive east approximately 9.6 miles to Broadway. Turn left and drive 1 block to Minnesota. Turn right and drive 3/10 mile to Shasta.
Turn left and drive 7/10 mile to the auction site.
WATCH FOR AUCTION SIGNS

LODGING(McCloud & Mt Shasta, 12 miles North)

BEST WESTERN TREEHOUSE INN(MT SHASTA)		800-545-7164
MT SHASTA INN & SUITES		530-918-9292
ECONOLODGE(MT SHASTA)		530-926-3145
McCLOUD HOTEL		800-964-2823
McCLOUD GUEST HOUSE		530-964-3160

AIRPORTS & CAR RENTAL

Redding, CA & Medford, OR Airports are approximately 70 miles from the auction site and are served by Horizon and United Air/Skywest Airlines.
Rental car services are available.
Weed Airport is approximately 20 miles from the auction site. Tiedowns and aircraft services are available
FOOD SERVICE AVAILABLE AT THE AUCTION SITE.

James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554