|
10AM - THURSDAY - AUGUST 5
Preview 10-4, Wednesday, August 4
Annapolis, CA
Past Auction - held in 2004
Display Catalog
Downloadable PDF Catalog
Advance Bid Center
|
|
DEBARKER
|
- ALBANY 660X24 rosserhead debarker, 24' capacity, TOSHIBA 100 hp/1765 rpm drive, FRANK ELECTRIC 10 hp/900 rpm carriage drive, 36" trunnion rolls, pantograph arm, FRANK ELECTRIC/ALLIS CHALMERS MG set, control booth, electrics, spares
|
|
CUTOFF SAW
|
- L&M type 9' bar cutoff saw, GE 20 hp/1760 rpm, FILER & STOWELL clamp, 3 hp hydraulic unit, spares
|
|
HEADRIG BANDMILL
|
- 7' RH headrig bandmill, GE 150 hp/700 rpm drive, 1" top wheel, feed thru rolls, mechanical strain, controls, spares
|
|
SLABBER, LOG KICKER
|
- TIMBERLINE 6-knife 24" RH Temposonic positioned slabber, 200 hp, SAFTRONICS soft start, spare knives, parts
- TIMBERLINE bent knife grinder
- Hydraulic operated log kicker, spare cylinders
|
|
CARRIAGE, SCANNER, CARRIAGE DRIVE
|
- 1990 SALEM 60"x24' 3-knee Temposonic positioned carriage, airdogs, tongs, flippers, (5) trucks, pantograph, rail bumpers, INOVEC 30 hp hydraulic unit, s/n: 144786
- INOVEC 5PC positioning log scanner w/EASALIGN controller, 24' 40-eye scanner bars, control booth
- INDUSTRIAL ELECTRIC carriage drive, 150 hp/1150-2000 rpm, 500V, FALK/INDUSTRIAL ELECTRIC reducer, INDUSTRIAL ELECTRIC 150 hp solid state drive, MATRA 225 kva transformer, 480-480Y/277V, spares, s/n: 8666-363
|
|
EDGERS
|
- UKIAH 6"x66" TAE edger, splined top arbor, 4-saw setworks, TOSHIBA 300 hp/1765 rpm arbor drive, 20 hp DC feed drive, press rolls, 21' infeed rollcase, (6) 6"x66" rolls, 30' outfeed rollcase, (8) 8"x68" rolls, drives, spares
- KOCKUMS CANCAR vertical splined arbor edger, 27" saws, feed thru chains, hold downs, oil mist system, LINCOLN 200 hp/1780 rpm arbor drive, ALLEN BRADLEY size 5 starter, (2) ALLEN BRADLEY size 4 starters, 3', 6' outfeed transfers, edger system mounted in FRUEHAUF 40' T/A van trailer, spares, s/n: 3061-15-72
- Custom built 2-saw edger, powered feed rolls, feed thru chains, 6' 4-strand, 6' 2-strand infeed transfers, drives, mounted on 40' T/A trailer, spares
|
|
RESAW
|
- MCDONOUGH 52" linebar resaw, SCHURMAN 11' setworks positioned linebar, GE 75 hp/1770 rpm drive, mechanical strain, powered infeed rollcase, belt transfer outfeed, PLC, controls electrics, spare saws
|
|
TRIMMERS
|
- ALBANY 24' line shaft trtimmer, (12) 24" saws, offset zero saw, 8' 9-strand lugged feed thru transfer, (5) even end rolls, 26' outfeed rollcase, (8) 8"x28" rolls, outfeed belt, drives, PLC, controls, electrics, spares
- ALBANY cut 22' pass 28' line shaft trimmer, (11) saws, GE 40 hp/1175 rpm, 9' 20-strand H78 lugged feed thru transfer
- Custom built 24' 9-saw individually motorized trimmer, 7' 9-strand lugged feed thru transfer, 6"x40' infeed belt transfer, 12"x28' cutoff belt, drives, electrics, trimmer system, mounted in 40' T/A trailer
- 12' precision end trim saw, (2) 24" saws, drives, 10' 3-strand lugged feed thru transfer, 8' 3-strand infeed transfer 12"x16' cutoff conveyor, 15 hp hydraulic unit, drives, controls
|
|
PLANERS
|
- YATES A62 planer/matcher, 6"x20", (6) heads, (8) knives, GE 150 hp/1765 rpm top & bottom heads, 25 hp side, top & bottom profile heads, 30 hp hydraulic drive feed rolls, 56" planer bridge, 20' single pineapple feed table, 6' 6-strand infeed transfer, drives, spider, controls, electrics, (20+) spare heads, profile setup stand, jointer bars, bearings, spares
- High speed stud planer, 6"x10", (5) heads, (12) knives, 25 hp top slabber head, 20 hp top head, 10 hp bottom head, 7.5 hp side heads, infeed belt, WSM 36HB chipper, infeed belt, blower, electrics, mounted in 40' T/A trailer, spares, s/n: 36577
|
|
HOG, CHIPPER, SCREENS CHIP BINS, CYCLONES, BLOWERS
|
- SCHUTTE 250 hammer hog, (2) 100 hp drives
- CM&E NORMAN 48 chipper, (8) knives, drop infeed, bottom outfeed, ELLIOTT 200 hp/705 rpm drive, spare knives, MDI metal detector
- CM& E Roto Kleen 5'x12' 3-deck chip screen
- 30-unit hydraulic chip bin w/8' dia long neck cyclone, 15 hp hydraulic unit
- (2) PEERLESS 24 unit hydraulic chip bins w/distribution auger
- PEERLESS 14 unit hydraulic chip bin w/distribution auger
- (2) 36" blowers, 50 hp
|
|
COMPRESSORS
|
- 20 hp tank mounted air compressor
- SULLIVAN 4 cyl compressor
- INGERSOLL-RAND 14-1/2 - 9x7 compressor, 125 hp/585 rpm, 100 psi
- 4'x15' air receiver
- 3'x10' air receiver
|
|
LUMBER STACKER/SORTER SYSTEM
|
- LUNDEN 24' lumber stacker, 5-arm lumber lowering hoist, (9) stacker arms, 8' 2-section 5-strand infeed transfer, even end rolls, 30' reversing rollcase, 4-strand jump transfer, 12' outfeed rollcase, 5' 4-strand outfeed transfer, (3) 5-strand merry-go-round transfers, 14' 8-strand unscrambler, 24' powered rollcase, 5' 6-strand lumber landing table, 30' 7-strand transfer, EUROTHERM 584 S drive, MOTOTRONICS K Plus brake, drives, controls, electrics
|
|
BANDING STATION
|
- SIGNODE 3, Type 12 vertical power strap feeder, top & side squeeze, end squeeze cylinder, bumpgate, 20' powered in & outfeed rollcases, 40 hp hydraulic unit
|
|
TILT HOIST
|
- 16' 4-arm mechanical tilt hoist, motor to reducer, 60" arms, 18' 4-strand infeed transfer, (5) 10"x66" even end rolls, drives
|
|
FILING & GRINDING ROOM
|
- TIMBERLINE Type MG bent knife grinder, s/n: 123
- ARMSTRONG #6RH sharpener, s/n: 1956
- ARMSTRONG #2LH sharpener, s/n: 1176
- WRIGHT W150 side grinder, s/n: 149
- (2) ARMSTRONG #16 sharpeners, s/n's: 13275, 12210
- ARMSTRONG 3-10 stretcher roll, s/n: 11967
- HANCHETT stretcher roll
- ARMSTRONG #6 stretcher roll
- THOMPSON H2C dual head guide mill
- THOMPSON B guide mill
- horizontal & vertical guide mills
- guide presses & jigs
- ARMSTRONG 5242 swage
- ARMSTRONG 5700, 5500 shapers
- JONES ORTH travel bed grinder
- spare band & round saws
- babbit pots
- grinding wheels
- more
|
|
BUILDING
|
- Approximately 60'x160' irregular shaped mill building, metal clad, wood framed, w/green chain roof, stacker roof, wood floor, lighting, electrics
|
|
TRANSFERS, CONVEYORS, ROLLCASES
|
- 90' 6-strand 4" rolltop green chain, GE 10 hp, FALK
- 52' 2-section 5 & 7-strand transfer, EURODRIVE 5 hp/54 rpm
- 32' 4-strand H78 transfer
- 30' 3-strand H150 infeed log deck, TOSHIBA 20 hp/1750 rpm, WESTERN 39.38 reducer
- 30' 3-strand H150 infeed log deck, BALDOR 7.5 hp/1760 rpm, reducer
- 27' 5-strand H78 transfer, BAUER gearhead
- 24' 6-strand H78 transfer, BAUER gearhead
- 23' 7-strand H78 transfer
- 20' 6-strand H138, GE 3 hp/45 rpm
- 20' 5-strand H84 transfer
- 20' 3-strand H150 infeed log transfer
- 20' 3-strand infeed log deck, GE 5 hp/30 rpm
- 20' 2-strand H150 infeed log deck, US 7.5 hp/1155 rpm, FALK 18.4:1 reducer
- (10+) transfers
- conveyors to 200'
- rollcases to 30'
- more
|
|
MISCELLANEOUS MILL EQUIPMENT
|
- (2) cable log winches
- 4'x12' fuel tank
- hourglass rolls
- chain
- shaft
- sprockets
- sheaves
- belts
- bearings
- electrical
- drums
- WESTINGHOUSE 200 hp/125kw/1180 rpm carriage drive
- motors to 175 hp
- diesel engines
- transmission
- truck parts
- COMET 12" radial arm saw
- PACKARD 12" drill press
- VULCAN parts washer
- oxy acetylene set
- MILLER Deltaweld 450 welder
- MILLER DW1 wire feed
- (2) LINCOLN SAE 300 welders
- LAHARCO laser
- more
|
|
ROLLING STOCK
|
- CAT 966C articulated log loader, CAT 3306 turbo diesel, log forks, canopy, s/n: 76J8084
- TAYLOR 200S 20,000 lb dual pneumatic forklift, diesel, 216² 2-stage
- mast, LOAD KING 2400 scales, sideshift, enclosed canopy, 4350 hrs, s/n:
- S-H2-22283
- TAYLOR TE180S 18,000 lb dual pneumatic forklift, diesel, 216" 2-stage
- mast, scales, sideshift, 1611 hrs, s/n: S-HE-19945
- CAT D7-17A cable blade crawler tractor, CAT diesel, 12' U-blade, HYSTER D7N winch, canopy
- PETTIBONE M12FNL articulated log skidder, DETROIT diesel, front log forks, GEARMATIC 19 arch winch, canopy, s/n: GR833
- 1998 CHEV K1500 extended cab 4x4 pickup, V8, 4 spd, a/c, toolbox
- UTILITY 24' single axle flatbed trailer
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT
: Full payment must be made by no later than 4pm, Friday, August 6.
- A 25% deposit is required by the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #48
- CA Bond #445652C
|
|
LODGING
|
| BREAKERS INN | | 707-884-3200 |
| GUALALA COUNTRY INN | | 707-884-4343 |
| MAR VISTA COTTAGES | | 707-884-3522 |
| SEA CLIFF ON THE BLUFF | | 707-884-1213 |
|
|
DRIVER DIRECTIONS
|
- From Gualala, CA drive south on Hwy 1 approximately 8 miles to Annapolis Road.
- Turn left and drive approximately 8 miles to Soda Springs Road.
- At the Annapolis Winery turn left and drive approximately 2 miles(stay on paved road) to the auction site.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|
