|
(Equipment no longer required)
10AM - THURSDAY - MAY 31
Preview 8-10, Thursday, May 31
1555 SE Crystal Lake Drive, Corvallis, OR
Past Auction held in 2007
Display Catalog
Downloadable PDF Catalog
Advance Bid Center
|
|
Machine Shop Equipment
|
- MORI-SEIKI MV Junior CNC machining center, YAZNAC MX-2 control, 16-station tool changer, 10,000 rpm 40 taper w/rigid tapping spindle, 14"x22" capacity, coolant filter, spare parts, (11) milling tool holders, 220v, 3 phase
- CLAUSING-COLCHESTER MASCOT 1600 engine lathe,18"x60"capacity, BUCK 12" 3-jaw chuck, D1-8 camlock mount, COLCHESTER high speed screw cutting attachment, CRAWFORD square indexing toolpost, ALORIS CA quick change toolpost, (10) toolholders, 220v, 3 phase
- HARDINGE CHNC 16 chucking & bar machine, 1-5/8" bar, 6" step chuck capacity, 16C 3,000 RPM A2-5 spindle, GENERAL NUMERIC 6T w/RS-232 port, turret top plate, turret tooling, collets, spares, 220v, 3 phase
- HARIG 6x18" hydraulic surface grinder, WHITNON cartridge type 1 hp spindle, 6"x18" WALKER CERAMAX fine pole chuck, hydraulic longitudinal automatic feed or manual feed, flood coolant reservoir, pump, 8" max diameter x 1-1/4" wide by 1-1/4" bore wheel, 220v, 3 phase
- FOSTER turret lathe, ram type, w/front 4-way indexable toolpost on carriage, 16" over ways, 9" over saddle, 2" thru bore, 1-1/2" thru collet draw tube spindle, magnetic starter motor, turret tooling, square indexing tool post, ram turret tool holders, collet closer, master collet, collet pads, 5 hp, 220 v, 3 phase
- KEARNEY & TRECKER MILWAUKEE H #2 plain horizontal mill, horizontal arbor support, vertical head, 12"W x 24" L capacity, milling arbors 50 taper & end mill holder, 220 v, 3-phase
- HEM 750 automatic cutoff saw, 6" diameter mild steel capacity, 3/4 x 11'x 0" blade, coolant, spares, 220v, 3 phase
- HUTSON 2016 burr bench vibratory deburring machine, 20 L x 16 W x 15 D tub, abrasive & polishing media, 120 v, single phase
- CENTRAL MACHINERY bench top sheet metal brake, 18 gage ms x 24" wide
- FOREMOST hydraulic press, modified for broaching, 72" h x 33" w x 36", DAYTON 10 ton x 10" stroke cylinder, QD hose, DAYTON 10 ton pneumatic driven hydraulic pump
- JET 15" drill press w/stand w/casters
- PACIFIC SCIENTIFIC Dual heat treat furnace, OMRON E5AX digital controller, 8 H x 11 W x 18 D capacity, air operated door, regulator-lubricator, 0 to 1850oF, spare set of heating coils, extra door gasket and spare thermocouple, 208-220 volt, 3-phase or 240 volt single phase, 8 kva
- DAYTON 2Z646B belt/disk bench sander, 1"x42" belt/8" diameter disk, w/stand
- BLUE M OV8A oven, 8"x8"x8" capacity, 100 to 500o F (38 to 260o C), 120 v, 525 watts
- MICRO-VUE M-14 optical comparator, 14" screen, profile and surface illumination
- MITUTOYO 940-142 digital hardness tester, ROCKWELL type - scales A, B, C D, E, F, G, H, K, full set of penetrators
- OIL MIST air filter, fits HARDINGE CHNC series lathes, 220v, 3phase, w/starter
- HARDINGE pneumatic retractable bar feed,1-5/8" diameter x 4 feet long, spares
- TC brand HARDINGE 5C collet indexer
- TROYKE U-9 horizontal/vertical 9" rotary table, w/dividing plates, indexer mechanism, shop made adapters for 5C collet, 2" 5C step chuck, HARDINGE chuck taper
- WELL-SETTING HCW-135G servo power feed for BRIDGEPORT style mill
- JET L80 1-ton chain hoist
- DAYTON hydraulic hand pump & cylinder
- HEALTHRIDER Softride R60 treadmill, & other fitness equipment
- ROYAL 3010 copy machine & network printer with stand
|
|
Inspection Equipment, Shop Equipment & Tooling
|
- DELTRONIC & MEYERS gage pins & gage pin sets
- MITUTOYO thread micrometer, 2-3 inch
- ENCO 12" vernier height gage
- MITUTOYO 12" vernier height gage
- 12"x18" granite plate on stand w/casters
- MITUTOYO series 511dial bore gage 6.5" to 10"
- KINEX 12" precision level
- NSK 0 to12" micrometer set
- Milling clamps & clamp sets
- (2) KURT 6" milling vises
- (3) 3" toolmakers vises
- ETTCO 2B tap head #10
- ETTCO 4B tap head
- Air operated drill jig
- Drill chucks
- BRIDGEPORT 6" milling vises
- 5C pneumatic collet closer for HARDINGE DSM59 lathe
- Grinding wheels & wheel adapters
- 4-jaw chuck
- 10" buck 6-jaw adjust-thru chuck, w/OD jaws, 2-piece reversible jaws
- (3) aluminum pie jaws sets, (2) new 10" 6-jaw chuck
- (2) drum heaters, ACRA ELECTRIC TRX-55, 240 v, 3 kw
- DAYTON hydraulic hand pump w/QD connector
- Tool & cutter grinding fixtures
- Steel work benches
- 12' bar stock rack
- Shop carts
- Stock rollers
- File cabinets
- Plywood shipping containers w/casters
- Band saw blades
- Feeler stock
- Grinding wheels
- Toggle clamps
- Jig & fixture components
- Drill bushings
- Sanding disks & rolls
- Spade drills & bits
- Drills, taps, endmills, milling cutters
- Carbide insert turning tools, boring bars & milling cutters
- HOUT drill dispensers
- Morse taper drill bits
- Spade drills
- DE WALT 10" power mitre box
- BESSLER 4x5 photo enlarger w/Universal color head
- BRONICA camera w/80mm, 135mm lenses, accessories
- Photo & darkroom equipment
- Much more! Much more!
|
|
Raw Materials
|
- Aluminum round bar stock: 2011, 2024, 6061, 7075
- Aluminum-nickel bronze round bar stock: alloy 630, alloy 642
- Carbon & alloy steel
- Plastic: ABS, delrin, micarta, PVC, teflon
- Stainless 17-4 condition A from 2" to 6-1/4" diameter
- Stainless: 303, 304, 316
- Cast tooling plate
- 7075
- Aluminum
- Mild steel
- Stainless
- 304 centrifugal cast stainless tube 7" OD x 2-1/2" wall x 34" long
- Chain & sprockets
- Tubing fittings & valves
- Shaft collars
- Ball bearings
- Bronze bushings
- (4) Reels 1/4" POLYFLOW tubing
- (2) Open frame 19" aluminum TELCO style relay racks
- Electronic components
- Conduit & conduit fittings, More
|
|
TERMS & CONDITIONS
|
- 10% BUYERS PREMIUM
- PAYMENT: Full payment must be made by no later than the close of business, auction day.
- Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. All items must be removed 1 hour after the sale or 8am to 4:30pm, Friday & Monday, June 1 & 4.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
- Due to safety & insurance reasons, persons under 12 not admitted.
- Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
- From north or southbound I-5, take the Lebanon/Corvallis/Hwy 34 exit (#228) westbound.
- Drive west on Hwy 34 approximately 9.6 miles to the Hwy 34 Bypass/Corvallis Newport Hwy.
- Drive south on Hwy 34 Bypass approximately 6/10 mile to the Pacific Hwy/OR 99W ramp.
- Continue south on 99W approximately 3/10 mile to SE Crystal Lake Drive.
- Turn left on Crystal Lake Drive and drive approximately 5/10 mile to the auction site.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2007 James G. Murphy Co.
All rights reserved worldwide
|
|
|
