Click small pics to enlarge

Click HERE for more photos





NORTHWEST HARDWOODS

9AM - TUESDAY - FEBRUARY 28
Preview 10 to 4, Monday, February 27
2005 E 17th St, Little Rock, AR

Past Auction held in 2006

Display Catalog

Downloadable PDF Catalog

Advance Bid Center

Planers
  • NEWMAN S-382HD double roughing planer, 6"x30" capacity, (2) heads, Quiet Cut helical carbide cutter heads, 75 hp/3520 rpm top head, 40 hp/3520 rpm bottom head, (3) sets hydraulic driven feed rolls, 1"-3" settings, forward & reverse drive, top head chip breaker, pressure bar, 25 hp hydraulic unit, 30"x12' infeed belt transfer w/motor to reducer, 30"x24' outfeed belt transfer, 5 hp hydraulic unit, controls, electrics, spider, spares, s/n: 14661
  • NEWMAN S-382HD double roughing planer, 6"x30" capacity, (2) heads, (6) knives, 60 hp/3520 rpm top head, 30 hp/3520 rpm bottom head, (3) sets hydraulic feed rolls, 1"-3" settings, forward and reverse drive, top head chip breaker, pressure bar, 25 hp hydraulic unit, spares, s/n: 13310
  • YATES A20 planer/matcher, 8"x15" capacity, (5) heads, (8) knives, 50 hp top, 25 hp bottom, 20 hp side and 25 hp matcher heads, chip breaker, 14' powered infeed rollcase, (6) 4"x14" rolls, gearhead motor, 20"x28' outfeed belt transfer w/motor to reducer, controls, electrics, spider

Trimmers
  • LSI 16' individually motorized trimmer w/(8) 24" air lift saws, 10 hp/1745 rpm, zero saw, 8' 5-strand infeed transfer, lumber stops, 15' 9-strand lugged outfeed decline transfer, 24"x36' clean out belt w/motor to reducer, accumulator tank, ALLEN BRADLEY 2100 5-section motor control center, (21) switches, controls, electrics, drives
  • Custom built 16' individually motorized jump saw trimmer w/(9) 20" saws, zero, 1' saws, 11' 8-strand lugged feed thru transfer, (6) 6"x28" even end rolls, 6' 5-strand outfeed decline transfer, controls, electrics, drives
  • (2) 8' precision end trim saws w/(2) 18" air operated chop saws, 7 1/2 hp/3520 rpm, feed thru gravity rolls, controls, electrics

Tilt Hoists
  • 16' 5-arm hydraulic operated tilt hoist w/58" arms, 78" travel, COE 40 hp hydraulic unit
  • 16' 4-arm hydraulic operated tilt hoist w/58" arms, 78" travel, 30 hp hydraulic unit
  • 16' 4-arm mechanical operated tilt hoist w/74" arms, 63" travel, motor, brake to reducer

Lumber Stacker
  • 1995 LUNDEN 16' auto placing sticker stacker w/16' 8-strand lumber unscrambler, hydraulic drive, 24' 2-section 6-strand lugged chains accumulator table, (2) 9"x42" even end rollcases, 8' 7-strand feed transfer, (16) sticker feeding arms, 30' 2-strand sticker transfer, 12' 2-strand sticker unscrambler, 16' 7-arm lumber elevator, 87" arms, hydraulic drive, 55 hp hydraulic unit, 78' powered outfeed rollcase, (31) 9"x81" rolls, ALLEN BRADLEY 7-section motor control center w/(21) switches, ALLEN BRADLEY SLC5/03 cpu, drives, controls, electrics, s/n: 43400

Package Saw
  • 1992 L&M VPC-24-HD package saw, 7' chain saw bar, approximately 20 hp, 24' hydraulic operated carriage, 10 hp hydraulic unit, 30'x13" clean out belt, SKK 5 hp/108 rpm gearhead motor, 30'x23" clean out belt, motor to reducer, s/n: 10292

Kilns - Drying Sheds - Kiln Carts - Rail
  • 2002 WINDSOR CTS-6-T-T steam fired high or low temperature split kiln, 18"w x 50'l aluminum/stainless steel construction, 3.44 bar or 50 psi operating pressure, SII MYSTIFIER cool water humidification system, motor cooling system, dry spec 2 WINDSOR kiln control system, dryline 8 point moisture measuring system, 195¯F, 230¯F maximum kiln design temperatures, 1380 fpm fillet velocity, hydraulic assisted interior, exterior doors, (6) SMITH CO 72" 6-blade fans w/(2) ALLEN BRADLEY 1336 PLUS II sensorless vector drives, (2) ALLEN BRADLEY 1336 variable speed drives, 15 hp/1730 rpm, WINDSOR motor control center, PLC cabinets, DELL, COMPAQ desktop computers w/monitors, HP LASERJET 4si printer, 8'x50' control & valve house, (2) 24'w x 80'l x 23'-28'h open faced drying sheds, rail, (5) 60"x192" kiln carts
  • (10) concrete block box kilns, aluminum doors, door hangers, kiln fan pipe, (4) w/(10) ALLEN BRADLEY 1336 PLUS II sensorless vector drives on kiln fan motors, PARTLOW temperature controllers, 480 volt electrics, (4) w/ALLEN BRADLEY 1336 VT drives, PARTLOW MRC 7000 series temperature controllers, 480 volt electrics (2) older style drives ,controllers, steam pipe, valves

Boiler
  • 1995 A.E.S./PLEXUS 600 hp two stage negative draft gasifier/burner hybrid boiler, 20,700 lb/hr operating pressure, ALLEN BRADLEY PLC (panelview), YOKOGAWA system controllers, inspected by FM GLOBAL, refractory replaced by plastic-firebox liner (approx. 1 yr), 25,316 cubic feet concrete silo w/FLYING DUTCHMAN unloader, screw auger to fuel metering bin, RV air lock to feed screw, 40 hp accelerator fan, 60 hp induction fan, 10 hp undergrate fan, fuel efficiency/B.E.T. auto tub cleaner system, industrial steam 50 psig boiler water feed tank w/pumps, FLOTRONICS OCHC2 175 gallon condensate tank w/pumps, ZURN fly ash recovery system, (2) drop bins, air locks, ash conveyor, chemical feed tanks, pumps, ALLEN BRADLEY/ROCKWELL 5-section motor control center w/(15) switches, ALLEN BRADLEY touch panels, 36'w x 51'l x 40'h all steel clear span building, 12'x30' roll up door

Baghouse & Fuel Handling Equipment
  • 1995 MAC 144-255 welded filter baghouse, (255) 12-bag capacity, rotary dispersal system, cone bottom, rotary air lock, NYB size 334 blower, RELIANCE XE50/1725 rpm motor, MAC/SUTORBILT 3 hp pump package, piping, stand, controls, electrics, spare cones & bags, s/n: 95-FNFC-09-10
  • 2002 ALANCO 7'w x 12'l x 16'l surge bin, (6) auger bottom, motor to REX PLANET gear reducer
  • 2001 SUTORBILT 8"x24" high pressure blower, TOSHIBA 100 hp/1770 rpm, STODDARD L61H silencer
  • 2001 CLARKES ER2020, 20"x20" chip feeder w/motor to shaft mounted reducer, s/n: 20200-H82 (rebuilt), 32"x120" silencer
  • 1997 GRECON BS-7 type CC702+2 spark extinguishing system, (4) zones, 2500 event memory storage, auto system testing and diagnostics, operating temperatures to 1830¯F, s/n: 1791
  • High and low pressure blowpipe, hardbacks, supports

Hogs
  • SALEM 24"x36" hammer hog, TOSHIBA 250 hp/1180 rpm, drop chute, spare hammers
  • JACOBSEN 24"x28" hammer hog, SIEMENS 125 hp/1725 rpm motor, horizontal feed, spare hammers

Ripsaws
  • MEREEN JOHNSON 424DC gang ripsaw, approximately 50 hp, 26" feed thru slat chain, oil mist system, 2'x2' infeed belt, ALLEN BRADLEY size 4 starter, s/n: MJ3519
  • DIEHL SL-52 ripsaw, 15 hp/3520 rpm, feed thru dip chain, 5" cut, fence, 65-195 fpm, starter, disconnect, s/n: 68M6252-1517

Grinding Room Equipment
  • HANCHETT DN38 travel bed knife grinder
  • JONES & ORTH travel bed knife grinder

Fuel Tanks
  • 1999 CON VAULT RN2000-35F double wall diesel tank, 2000 gal capacity, 213,500 cfh/cms venting, SIMPLEX fuel port, PNEUMERCATOR LC1001 liquid leveling control system, TOKHEIM 7553 AHC diesel pump, s/n: M851254

Transfers - Conveyors & Rollcases
  • (2) 80' 4-strand 2 1/2" pitch chain transfer w/motor to FALK reducer
  • 70' 5-strand 2 1/2" pitch chain transfer w/motor to FALK reducer
  • 68' 5-strand H78 chain transfer w/SM CYCLO gearhead motor
  • 67' 5-strand 4" roll top chain transfer w/motor to reducer
  • 40' 4-strand H130 chain transfer w/motor to FALK reducer
  • 36' 5-strand 2 1/2" pitch chain transfer w/motor to reducer
  • 35' 5-strand rooftop chain transfer w/motor to reducer
  • 34' 4-strand rooftop chain transfer w/motor to reducer
  • 30' 4-strand rooftop chain transfer w/motor to reducer
  • 20' 5-strand H84 chain transfer w/motor to SM CYCLO reducer
  • 18' 6-strand 2 1/2" pitch chain transfer w/SM CYCLO gearhead motor
  • 16' 5-strand H78B chain transfer w/EURO 5 hp/44 rpm gearhead motor
  • 15' 6-strand 2 1/2" pitch chain transfer wmotor to reducer
  • 13' 6-strand 2 1/2" pitch chain transfer w/SM CYCLO gearhead motor
  • 13' 5-strand H130 chain transfer w/motor to reducer
  • 10' 5-strand H78 unscrambler w/SM CYCLO gearhead motor
  • 20"x60' belt transfer w/motor to reducer
  • 20"x40' belt transfer w/motor to reducer
  • 20"x36' belt transfer w/SKK 5 hp/56 rpm gearhead motor
  • 20"x32' belt transfer w/motor to reducer
  • 20"x28' belt transfer w/motor to reducer
  • 20"x24' belt transfer w/motor to reducer
  • 20"x22' belt transfer w/gearhead motor
  • 16"x37' belt transfer w/motor to SM CYCLO
  • 66' 8"x14" box chain w/flites conveyor, motor to reducer
  • 30"x47' cleated belt conveyor w/5' fiberglass tub, MDI CR-85 metal detector, SM CYCLO gearhead motor
  • and much, much more

Shop & Miscellaneous Equipment
  • QUINCY 25 hp tank mounted compressor
  • AIRTEK TW-200 twin regenerative air dryer, s/n: 894-500
  • INGERSOLL RAND T-30 twin cylinder tank mounted compressor
  • QUINCY 25 hp twin cylinder compressor
  • WHIRLWIND 14" right hand chop saw
  • AMERICAN 1223-4BA 4'x10' scissor lift
  • (3) AIR FLOW systems dust collectors, 115 volt/single phase
  • CINCINNATI 1 hp/single phase dust collector
  • STRAP SAVER series 500B scrap chopper
  • (2) 16" swede lumber rolls
  • approximately 100 hp/60" planer blower
  • approximately 50 hp/36" blower; (20) 33"x108" lumber pull carts
  • large quantity of air & manual banders
  • banding tools, banding
  • self dumping hoppers
  • cameras
  • monitors
  • LINCOLN SA-250-03-152 portable welder/generator
  • HOTSY steam cleaner
  • 10 ton air, manual floor jack
  • motors to 150 hp
  • DAYTON 10" contractors saw
  • MILWAUKEE chop saw
  • WILTON metal cutting bandsaw
  • box mag drill
  • anvil
  • JOHANNSON 32" reversing power feed drill press
  • CAROLINA 30 ton shop press
  • GREENLEE 1800 pipe bender
  • OREGON 511A chain sharpener
  • PORTER CABLE porta-band w/stand
  • PEXTO 1011 8'x14 ga brake
  • MAYLINE 5-drawer print file; DART XL80 blueprint copier
  • (10) red oak 3'x8' lunch tables
  • (10) red oak 3'x3' tables
  • (60+) red oak slat chairs; (10+) space heaters
  • floor fans
  • double end grinders
  • vises
  • TEEL 3" portable pump
  • steel tables
  • pipe stand
  • portable oil filter pump
  • pallet racking
  • sprockets
  • bearings
  • hose
  • hand trucks
  • welding supplies
  • eye wash stations
  • air hose reels
  • balancers
  • clean up tools
  • shop vacs
  • sticker racks
  • assorted steel pipe and stock
  • UV tarps
  • much, much more!

Truck Scales
  • METTLER TOLEDO digital Truckmate 160,000 lb x 20 lb load cell truck scales, 11'x70'x4 section low profile steel deck, TOLEDO 8530 digital read out, s/n: 5013145-5RZ, w/METTLER TOLEDO printer

Office Trailer
  • 10'x45' office trailer, w/bathroom, BARD electric furnace, (2) man doors with steel steps

Rolling Stock
  • (3) TAYLOR T330M 33,000 lb dual pneumatic forklifts, CUMMINS diesel, 2-speed automatic, 180" 2-stage mast, stainless steel 6' forks, s/n: S-BF-32457 (50.3 original hours), 43,050 lbs, s/n: S-BF-31933 (1191.5 original hours), 42,700 lbs, s/n: S-BF-31551 (196.67 original hours), 42,700 lbs
  • (2) TAYLOR TE-330M 33,000 lb dual pneumatic forklifts, CUMMINS diesel, 2-speed automatic, 2-stage mast, stainless steel 7' forks, s/n: S-L1-23697 (7644.8 original hours), 40,950 lbs
  • TAYLOR THD330M 33,000 lb dual pneumatic forklift, CUMMINS diesel, 2-speed automatic , 2-stage mast, 6' forks, s/n: S-T5-28175 (78.2 not original hours), 42,100 lbs
  • (3) HYSTER H110XM 11,000 lb dual pneumatic forklifts, propane, monotrol, 196" 3-stage mast, stainless steel 4' forks, s/n: K005V037381Z (2064 hrs) , s/n: K005D04238X (1794 hrs), s/n: K005D04284X (1804 hrs)
  • 2005 HYSTER H90XMS 4000 lb pneumatic forklift, propane, monotrol, 189" 3-stage mast, 6' forks, s/n: E001H03236C (20 hrs)
  • 1992 FORD F250XL extended cab 4x4 pickup, V8, auto, cruise, A/C, PW/PDL, 10' steel flatbed w/rack, LINCOLN COMMANDER 300 DC welder/generator, wire, stick, tig, CC/CV, 375 amp, 10,000 watt, 120/240 volt, 12 1/2 hp compressor, air reel, AG spray unit, hose reel,
  • OTTAWA YT-THIRTY yard truck, CUMMINS diesel, 4-speed auto, hydraulic 5th wheel, 977 hrs

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #48

LODGING LITTLE ROCK, AR
    Days Inn, Little Rock, AR501-490-2010
    Embassy Suites, Hot Springs, AR501-624-9200
    Holiday Inn-Airport, Little Rock, AR501-490-1000
    Holiday Inn Express-Airport, Little Rock, AR501-490-4000
    Travelodge-Airport, Little Rock, AR501-490-2200

DRIVER DIRECTIONS NORTHWEST HARDWOODS, LITTLE ROCK, AR
  • From east or westbound I-440, take the Confederate Blvd/Springer Blvd exit.
  • Drive north on Confederate Blvd to East Roosevelt Rd. Turn right and drive east on Roosevelt to Bolton St.
  • Turn left on Bolton and drive north approximately 2/10 mile where Bolton turns into E 22nd St.
  • Drive west on 22nd approximately 2/10 mile to Boyce St.
  • Turn right on Boyce and drive north approximately 3/10 mile to E 17thSt.
  • Turn right and drive east approximately 2/10 mile to the auction site.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2006 James G. Murphy Co.
All rights reserved worldwide