Click small pics to enlarge

Click HERE for more photos


9AM - TUES & WED - APRIL 21 & 22
Preview 8-4 Monday, April 20
Priest River, ID

Display Catalogs: Day 1 | Day 2 | X Lots

Downloadable PDF Catalog

Advance Bid Center

Debarkers
  • 2001 VALON KONE BRUNETTE KODIAK 636FS2R 36" 6-arm dual ring debarker, 5" min-36" max diameter, 8' min-21' max length, 220 fpm max capacity, 145 rpm ring, 125 hp rotor drives, air seals, (12) feed rolls w/ (3) 30 hp/1200 rpm drives, 40 hp variable frequency drives, auto soft opening tool arms, rotor pull outs, TRABON lube, 30 hp hydraulic unit, AB 500 SLC PLC, 27' H132 infeed log haul, approx 60' H132 outfeed log haul, cab, marked controls, s/n: 01-3600, (3) cedar scribe arms, spare arms, parts, new rotor bearings, seals on the #2 rotor in 2008
  • 1993 NICHOLSON A5 LH 35" 6-arm debarker, 4" min, 35" max diameter, 8' min log length, 220 fpm max capacity, 125 hp ring motor w/200 hp AB SMC drive, 75 hp DC feedworks w/drive, spare feedroll, (3) spare intermediate gears, (3) spare banana plates, spare tool arm cylinder, spare feedroll cylinder, tool arm template repair station, spare pivot pot, crate of misc parts, ring bearing has less than 8000 hrs runtime (located at Laclede, sold by photo; preview & removal by appointment only)

Merchandiser Saws
  • 40' 5-saw x 84" insert tooth whole log merchandiser w/0, 16', 20', 32' & 40' saws, 75 hp/885 rpm, approx 40' H132 infeed log haul, drive, SQUARE D ALTIVAR 58-30 hp variable frequency drive, 8'x8' cab, controls, 40, 50 hp hydraulic units
  • QM INDUSTRIES QM72CS72 72" insert tooth whole log cut off saw, 75 hp/885 rpm

Whole Log Metal Detector
  • MDI CR85 44"x52" whole log metal detector w/43"x50" fiberglass trough, 30"x35' feed thru belt , 3-arm kicker, SKK gearhead motor, SQUARE D ALTIVAR 30 hp variable frequency drive, s/n: 41990

Double Length Infeed
  • Rebuilt 2003, OPTIMIL double length infeed, new log turner, hold down rolls, spike rolls, slides, bases, shift & lift assemblies, chain bed, rebuilt hydraulic cylinders, re-plumbed & valved, new REX PLANETGEAR POLARIS reducer, 30 hp TOSHIBA, direct driven universal drive line, drive support frame, all new photo eyes, CONCEPT SYSTEMS VFD build ups w/brake resistors for log turner, infeed chain & spike rolls, PLC ( located at Chilco, sold by photo; preview & removal by appointment only)

Head Rigs
  • (2) KOCKUMS/L&B right hand & left hand 5' canted 17O air strain headrig bandmills, TOSHIBA 200 hp/1770 rpm drives, SQUARE D 250 hp solid state soft start, outfeed rollcase w/drive, cab, controls, parts new/used bottom wheel on the #1 head rig (east side) in 2008

Carriages-Setworks-Drives
  • 1994 SALEM 42"x12' right hand canted 17O 3-knee Temposonic positioned carriage w/tong & hammer dogs, (4) 4' jump chains, (3) trucks, pantograph, rail, bumpers, hydraulic take ups, 1997 PAW TAW JOHN 1029197 3-axis carriage setworks, 8'x8' cab, controls, INOVEC 30 hp hydraulic unit, s/n: 164144-94
  • SALEM 30"x13' left hand canted 3-knee Temposonic positioned carriage, hydraulic take ups, 1996 PAW TAW JOHN 120696 3-axis carriage setworks, 8'x8' cab, controls
  • INDUSTRIAL ELECTRIC 250 hp/1150-1800 rpm/300 volt DC carriage drive w/FALK 2130YS2-S reducer, 11.86:1 ratio, IES 250 hp solid state drive, EUROTHERM 590 digital series drive, isolation transformer, controls, electrics (drive for 30"x12' carriage)
  • INDUSTRIAL ELECTRIC 250 hp/850-900 rpm/300 volt DC carriage drive w/WESTERN style 80R25466 reducer, 9.39 ratio, 2002 IES 250 hp solid state drive, EUROTHERM 590+ series drive, isolation transformer, controls, electrics (drive for 42"12' carriage)

Horizontal Resaws-Setworks
  • KOCKUMS/L&B 6' Temposonic positioned right hand stacked twin band horizontal resaw, 200 hp/1188 rpm, full air strain, hold down & feed thru knurled rolls, in & outfeed rollcases, SQUARE D 200 hp ALTISTART 46-ATS46C25N solid state soft start, GE series I PLC, PAW TAW JOHN 040799 setworks
  • KOCKUMS/L&B HSA-1 6' horizontal band resaw, 200 hp/1180 rpm, full air strain, hold downs & feed thru knurled rolls, in & outfeed rollcases, SQUARE D 200 hp ALTISTART 46-ATS46C25N solid state soft start, (2) SQUARE D ALTIVAR 58 10 hp drives, 1999 PAW TAW JOHN 112596 setworks
  • KOCKUMS/L&B HSA-1 6' horizontal band resaw, 200 hp/1180 rpm, full air strain, hold downs & feed thru knurled rolls, in & outfeed rollcases, SQUARE D 200 hp ALTISTART 48-ATS48C32YN solid state soft start, (2) SQUARE D ALTIVAR 58 15 hp & 10 hp drives, AB SLC 500 PLC, controls, PAW TAW JOHN 112596 setworks
  • KOCKUMS/L&B HSA-1 5' horizontal band resaw, 200 hp/1180 rpm, full air strain, hold downs & feed thru knurled rolls, in & outfeed rollcases w/PDL ultra drive ELITE VE-205D54 AC motor controller, AB SLC 500 PLC, controls, new/used wheels in 2008

Edgers-Optimizers
  • (2) SCHURMAN 4"x56" splined top arbor edgers, GE 100 hp/1790 rpm drives, clam shell openings, press & knurled feed thru rolls w/SQUARE D ALTIVAR 58TRX-ATV58HC13N4X drives, converted from ALLEN BRADLEY 705 size 5 RVS, controls, electrics
  • (2) 2002 DIGITRON 20' edger optimizers, (1) w/(11) DYNAVISION B8A-17-14 scan heads, (1) w/no scan heads, both have no AB CONTROL LOGIX PLC's, Temposonic positioning, (5) board hooks, infeed rolls, clamps, 20' 6-strand scanner transfer, drives, s/n: 1422-205-1, computers, controls
  • SALEM 6"x60" splined top arbor gang edger, 300 hp, 19' split roll infeed rollcase, SQUARE D ALTISTART 3-400 hp solid state soft start, 600 volt disconnect
  • SCHURMAN 4TA42 splined top arbor gang edger, no drives, press roll, knurled rolls, oilers (not installed)

Trimmers-Optimizer-Grade Mark Reader
  • 1990 IRVINGTON MOORE 6672LH individually motorized trimmer, trims 30', passes 36', currently trims 20', 28" air lift saws, 7.5 hp, cuts 6" max, 1/2"-24" Temposonic positioned 3-stage fence, 30' 3-section lugged feed thru transfer w/66" even end rollcase, controls, PFS 30 hp, 60 gpm, 1500 psi hydraulic unit
  • 2004 COE/NEWNES McGEHEE 24' scanner optimizer OPT-TTL320-01 (installed 1/05), (11) DYNAVISION 80APVT2A scanner heads, 7' 9-strand 3800 lug loader, 13' 7-strand scanner transfer w/30" even end rollcase, AB SLC 500 PLC, computers, controls, s/n: 04-0983-DO
  • Custom built individually motorized LH trimmer, cuts 18', passes 22', (9) 20" air lift saws, 7.5 hp, cuts 6" max, 22' 2-section 7 & 10-strand lugged feed thru transfer w/even end rollcase, NEWNES 5' 7-strand lug feeder, AB SLC 500 PLC, controls
  • Custom built 20' individually motorized trimmer w/(9) air lift saws, zero & 1' saw, saws from 8'-20', 25' 2-section 7 & 9-strand lugged feed thru transfer w/lug feeder, controls, electrics
  • Custom built 9' line shaft driven trimmer w/air lift saws, 17' 2-section 5-strand lugged feed thru transfer, even end transfer, mini lasers, controls, electrics
  • 8' 2-saw hula trim saw system w/(2) 20" saws
  • LUCIDYNE 200 color scan grade mark reader, project 2663

Sorters-Stackers
  • NEWNES 20' 39-bin J-bar lumber sorter, 2"T x 4"W x 4'L minimum to 4"T x 6"W x 20'L max capacity, BALDOR 40 hp DC drive w/EUROTHERM 550 drive, (3) AB SLC 500 PLC's, AB 509, 6-section MCC w/(37) switches, 20' 6-strand incline transfer, (3) 43' 5-strand take away transfers w/SKK gearhead motors, 30 hp hydraulic unit, air receiver
  • IRVINGTON MOORE 20' 13-tray skate roll lumber sorter, 2"T x 4"W x 4'L minimum to 4"T x 6"W x 20'L max capacity, 40 hp DC drive, 18' 4-strand lugged infeed transfer, 46' 4-strand decline transfer to skate roll bins, 24' 4-strand x 6" decline tipple, approx (30) SKK gearhead motors, air receiver, steel structure, roof
  • NEWNES 16' 12-tray x 165' long tray sorter w/2-section 5-strand lugged incline infeed, 38' 5-belt tipple, catwalks, stairs (not installed)
  • 2002 MOCO 20' lumber stacker w/auto stick placer, unscrambler, 2-strand sticker transfers, hydraulic operated 5-arm lumber lowering hoist w/68-1'2" arms x 70" travel, (11) lumber placing arms, (2) 13' 6-strand stacker transfers, feed chains, 22' 4-strand take away transfer, AB 3-section MCC w/(12) switches, AB SLC 500 PLC, SQUARE D ALTIVAR 58TRX 5 hp drive, 50 hp hydraulic unit, SKK gearhead motors
  • NEWNES 20' over end lumber stacker, (5) sticker magazines, hydraulic 2-arm lumber lowering hoist w/60" arms x 50" travel, 14' 2-strand stacker transfers w/even end rollcase, 8' 10-strand unscrambler, 26' 2-section 4 & 5-strand take away transfers, (2) stamping stations, AB SLC 500 PLC, approx 20 hp hydraulic unit
  • IRVINGTON MOORE 16' over end stacker w/6-arm fork carriage, (3) sticker pockets, 6-arm lumber hoist (not installed)

Planers-Pineapple Feed Tables-Bridges-Moisture Detector
  • 1985 COASTAL 16-knife, 6-head, 6"x15" planer/profiler w/150 hp top, 75 hp bottom, approx 30 hp side heads, 40 hp top & 75 hp bottom profiles, (4) sets hydraulic infeed & outfeed rolls, s/n: 413801B053885 (not installed)
  • COASTAL 25' hydraulic double pineapple feed table w/(7) 12"x30" spiral rolls, (3) 12"x14" smooth rolls w/single smooth powered rolls, hold over shoe, steel supports w/5' 6-strand infeed transfer, gearhead drive, s/n: HDFT03885 (not installed)
  • 195 hp hydraulic unit
  • 30"x68" slow down belt w/US gearhead motor
  • STETSON ROSS 6-12-A1 planer, 16-knife, 4-heads, 8"x24", 80 hp top, 40 hp bottom, 25 & 40 hp side heads, profile stands w/outfeed rolls, FRANK ELECTRIC 50 hp/650-800 rpm DC planer feed roll drive, 17' dual pineapple feed table w/(6) 12"x28" spiral & smooth rolls, 6' 5-strand infeed transfer w/SKK gearhead, FRANK ELECTRIC 25 hp/500-1200 rpm DC pineapple feed drive, 13' live bridge w/(6) 12"x28" rolls, 18"x16' outfeed belt w/stain tunnel, SKK gearhead, 5'x20' slow down belt, spare heads, profile set up stands
  • 2003 NMI non contact pass thru moisture sensor system

Breakdown & Tilt Hoists-Banders-Package Saw-Round Table-Blower
  • 16' 4-arm mechanical breakdown hoist w/55" arms x 65" travel, motor to reducer, 17' 4-strand infeed transfers w/motor to reducer, sticker recovery system
  • 5-arm tilt hoist (not installed)
  • LINDEN 16 5-arm continuous tilt hoist (not installed)
  • SIGNODE PSF-2 steel automatic bander, top & side squeeze, bump gate, 60"x50' infeed, 60"x12' outfeed rollcases, AB SLC 500 PLC, 50 hp hydraulic unit, s/n: 04160
  • SIGNODE PSF-2 steel power strap feeder, w/top & side squeeze, DF-23 strap dispenser, s/n: 30700
  • SIGNODE steel automatic bander, top & side squeeze, 56"x50' infeed, 56"x22' outfeed rollcases, controls, shared hydraulic unit (located at Laclede, sold by photo; preview & removal by appointment only)
  • SIGNODE M22LR-44 bander, top & side squeeze, corner protector placers, 10 hp hydraulic unit, 4000-8000 lb capacity, s/n: T038 (located at Reload, Priest River, sold by photo; preview & removal by appointment only)
  • 2005 HOLTEC transcut 6' car type package saw, 15 hp self contained hydraulic unit, s/n: 05272 (installed in 2008)
  • 21' diameter table w/drive
  • JH BURNS approx 72" blower, TECO 150 hp/1175 rpm

Hogs
  • JEFFREY 55WB hammer hog, 300 hp/1180 rpm, 2300 volt 50 tph capacity, (2) GE CR305 starters, s/n: 12393 (new arbor bearings inside)
  • WILLIAMS series S type K hammer mill, TOSHIBA 75 hp/1800 rpm, 24" feed, 30" discharge, 3-6 tph capacity

Chippers-Screen-Chip Bins-Surge Bin-Cyclone
  • PRECISION TRUE SIZE 66-18, 8-knife chipper, 300 hp/593 rpm/460 volt, horizontal infeed, top outfeed, approx 24 cords per hour, AB SMC PLUS 300 hp soft start, s/n: 2095 (new wheel & spout in 2008)
  • PRECISION 66" 8-knife chipper, 300 hp, horizontal infeed, top outfeed (not installed; located at Chilco, sold by photo; preview & removal by appointment only)
  • CME 81, 8'x16' 3-deck chip screen w/drive
  • (2) approx 40-unit chip bins, approx 15 hp hydraulic unit
  • Approx 24-unit hog bin, approx 10 hp hydraulic unit
  • Approx 10' wide x 18' long x 15' high double auger live bottom surge bin
  • Approx 8' diameter cyclone, large quantity of blowpipe (not installed)

Compressors-Dryers
  • 2003 QNW MG25-BSE-125 single stage, air cooled, oil flooded rotary screw compressor, 25 hp, 96 acfm @ 125 psig, 135 psig max, 10,162 hrs, s/n: 040437
  • 1990 QNW 500-D1 rotary screw compressor, 100 hp water cooled, 37,600 hrs, AB size 4 starter, s/n: 900549
  • SULLAIR 25-200L rotary screw compressor, 200 hp, water cooled, CH size 6 starter, s/n: 8906 KLK
  • 1996 PNEUMA PE-1500 regenerative air/gas dryer, 1500 scfm @ 100 psig, 105 scfm purge flow, s/n: 80148
  • 1999 PNEUMA PE-1000 regenerative air/gas dryer, 1000 scfm @ 100 psig, 150 psig max, 70 psig surge flow, s/n: 9908-S132050-012793
  • 1993 PNEUMA PE-750 regenerative air/gas dryer, 750 scfm @ 100 psig, 150 psig max, s/n: 9308-S114698-56256

Boiler-Kilns
  • Installed 2002, CLEAVER BROOKS DL-68-400-CN-4 package water hog fuel fired boiler, 250 lbs pressure, 350 lbs design pressure, 50,000 lbs per hour, 3902 sq ft heating surface, 673 sq ft water wall, CB SPRAYMASTER SM-70 deaerator, 70000 per hr, s/n: 31260, Permut 6'x24' water make up tank w/GRUNDFOS 25 hp/150 gpm pumps, (2) CULLIGAN chemical make up tanks, (2) GRUNDFOS pumps, (3) LMI pumps, 2005NYB 10000 cfm blower, SIEMENS 150 hp, back blower, motor, controls, electrics, infeed fuel system w/(2) 16' 4-strand box chain infeed hoppers, (3) approx 60' double box chain fuel conveyors, approx 18"x40' auger infeed belt, (2) 10' single auger infeeds, 12"x80' overs/return belt, (3) ash augers, 2500 kva transformer, main switchgear, MCC's, spares, 60'W x 65'L x 55'-60'H all steel clear span building
  • Installed 2002, (4) 35'x120' AMERICAN steel span S35-21 double track multi-zone steam fired kilns, 15' high at doors, 4" kiln fan pipe, (14) 30 hp x 72" fans per kiln, (8) ULTRA DRIVE ELITE 30 hp drives, (8) heat exchangers, (8) SQUARE D ALTIVAR 58 & 58TRX drives, (8) AB SLC 500 PLC's, USNR kiln boss process system, (5) 8'x40' cargo containers used as control house, shared controls, electrics in boiler
  • 5030' of kiln rail
  • (500+) kiln carts, 4" square tube, 30"x72" center to center, 46"x108" overall
  • (100,000+) kiln stickers, 3/4"x1-1/2"x52", (80) in racks + (12) bundles
  • (1000+) 3-1/2" diameter single kiln coils

Filing & Grinding Room Equipment
  • 2004 VOLLMER CHD251R2 CNC controlled carbide face & top grinder w/ND230 robot operated stacker, (4) loading carriages, 130-600 mm saw diameter, 16-115 mm saw bore diameter, 300 mm stack max, saw inspection system, s/n: 710, 376
  • 2005 VOLLMER CBF310 bandsaw sharpener, s/n: 124
  • (2) 1999 VOLLMER CHF210 round saw sharpeners, s/n's: 305, 304
  • ARMSTRONG bandsaw leveler, s/n: 20547
  • ARMSTONG circle saw leveler, s/n: 20481
  • (2) 1998 ISELLI BS4 wet type band saw sharpener w/CNC controls, 5-35 mm tooth height, 5-120 mm tooth spacing, 80-400 mm blade height, 6000-14000 blade length, s/n's: 826249, 825999
  • (3) ISELLI type SAA stellite tippers, s/n's: 707018, 706588, 217474
  • (2) WRIGHT W-1701 profile grinders, s/n's: L9512, E963S
  • ARMSTRONG #4 stretcher roll w/anvils, bench, s/n: 10071
  • (4) ARMSTRONG #4 bandsaw sharpener, (3) left hand, (1) right hand
  • (2) ARMSTRONG #90 equalizers, s/n's: 17499, 17156
  • NEWMAN G280 tub grinder, s/n: 280-199
  • 1997 WESTERN NIELSEN 800 travel bed profile grinder, s/n: 97-128-800-3 (not installed)
  • IIDA PDG-231 MILLENIAL travel bed profile grinder
  • Shop built guide resurfacer
  • (2) ACME circle saw sharpeners
  • FOLEY 357 circle saw sharpener s/n: 1776
  • STIHL USG chain sharpener
  • (2) HOE guide grinders
  • (2) Babbit pots, 18"D x 20"H & 14"Dx16"H
  • (5) Round saw anvils, 16"-20"
  • (2) Circle saw stands
  • (2) 84" insert tooth saws
  • (20) New boxes, 10 ea .040-.055 ga, 20" & 22" saws
  • Hundreds of spare 16"-22" used saws
  • (30+) spare 5' & 6' bandmill blades, (10) new in crate

Mill Electrics
  • 2002 SUNBELT 2500 kva pad mounted transformer, 20800/12009 volts primary to 480Y/277 secondary, s/n: PHG-0680
  • 2005 SQUARE D 3000 amp main switchboard, 480Y/277 volts, (5) 600, (4) 400 amp breakers, s/n: 2013901-001
  • CUTLER HAMMER 4000 main switchboard, 480Y/277 volts, (2) 600, (2) 400 amp breakers, 4000 amp metering section
  • GE SCP PLUS 6-section main mill switchboard w/(3) 3000 amp, 2000 amp power breakers, (2) POWER LOGIC meters
  • ALLEN BRADLEY 505 & 509 series, 16-section MCC w/(70) switches
  • ALLEN BRADLEY 505 & 509 series, 15-section MCC w/(65) switches
  • ALLEN BRADLEY 509 series, 7-section MCC w/(21) switches
  • ALLEN BRADLEY 509 series, 6-section MCC w/(37) switches
  • ALLEN BRADLEY 509 series, 5-section MCC w/(31) switches
  • ALLEN BRADLEY 509 series, 5-section MCC w/(27) switches
  • ALLEN BRADLEY 509 series, 5-section MCC w/(23) switches
  • ALLEN BRADLEY 509 series, 5-section MCC w/(19) switches
  • ALLEN BRADLEY 509 series, 4-section MCC w/(20) switches
  • ALLEN BRADLEY 505 series, 4-section MCC w/(19) switches
  • (2) ALLEN BRADLEY 509 series, 3-section MCC's w/(15) switches
  • ALLEN BRADLEY 509 series, 3-section MCC w/(12) switches
  • ALLEN BRADLEY 509 series, 3-section MCC w/(11) switches
  • ALLEN BRADLEY 509 series, 2-section MCC w/(14) switches
  • CUTLER HAMMER 2-section MCC w/(11) switches
  • (2) INDUSTRIAL ELECTRIC 250 hp solid state carriage drives
  • ALLEN BRADLEY SMC PLUS 300 hp drive
  • (26) SQUARE D ALTIVAR & ALTISTART drives & soft starts to 400 hp
  • (9) PDL ultra drives to 200 hp
  • (4) EUROTHERM digital drives to 250 hp
  • SAFTRONICS DC6-KDC6-126-4, 50 hp DC drive
  • SAFTRONICS GP5 15 hp variable frequency drive
  • (2) GE CR305 starters (hog starter)
  • SIEMENS ALLIS 300 hp starter
  • (2) SQUARE D 250 hp soft starts
  • (14) ALLEN BRADLEY SLC 500 PLC's
  • Transformers to 440 kva
  • (400+) installed motors to 300 hp
  • (100+) spare motors, gearhead motors, reducers

Vibratory Conveyors-Log Decks-Log Hauls-Transfers-Conveyors-Rollcases
  • WSM CSCB-56, 24"x52' vibratory conveyor, 8' fines drop out, s/n: 487897
  • WSM CSCB-48, 24"x40' vibratory conveyor, 5' fiberglass trough, 4' fines drop out, MDI metal detector, s/n: 290837
  • VIBRA PRO BLS-181-200-F3/16-MS-78F, 18"x78' vibratory conveyor, paddles
  • SYNCRO coil SC2472, 18"x138' vibratory conveyor, s/n: C3619-1
  • SYNCRO coil SC2714111, 18"x33' vibratory conveyor, s/n: C3619-2
  • 38' 5-strand; 34' 5-strand; 25' 6-strand; 17' 6-strand; 31' 4-strand log decks
  • (6) log hauls to 69'
  • (152) lumber transfers to 75'
  • (32) lumber rollcases to 52'
  • (41) chain conveyors to 124'
  • (15) belt conveyors to 60'

Trailer Loader
  • MAR approx 10,000 lb trailer loader w/ROBBINS & MEYERS hoist

Shop Equipment-Stores-Miscellaneous
  • LANDA GOLD series pressure washer; NORCO 55 ton hydraulic shop press; hydraulic test bench; 20" metal cut off saw; (2) 14" hose chop saws; (2) JET 20" drill presses; welders; vises; oxy/acetylene sets; double end grinders; SIGNODE band chopper, banders & banding; wheel pullers; power tools; fuel tanks; lube reels; propane tube type mill heaters; air hose; cameras; monitors; (20+) A/C units; flammables cabinets; new & used mill chain; sprockets; shafting; pulleys; bearings; electric chain hoists; mill lighting; spare starters, breakers, disconnects, wire, electric stores, wire & conduit

Mill Site Buildings
  • 25'-33'H x 140'W x 215'L all steel irregular shape main mill building with additions
  • 28'-32'H x 78'W x 100'L resaw building
  • 26'-29'H x 31'W x 62'L all steel clear span #2 headrig building
  • 12'-23'H x 42'W x 64'L bander building
  • 55'-60'H x 60'W x 65'L all steel clear span boiler building
  • 45'-50'H x 61'W x 95'L all steel clear span boiler feed building
  • 36'-39'H x 28'W x 49'L all steel clear span shop building
  • 27'-30'H x 56'W x 137'L all steel planer building
  • (4) 8'x40' cargo containers
  • 8'x35' cargo container
  • 8'x20' cargo container
  • 8'x15' cargo container
  • Large quantity 16'-27' high building siding

Rolling Stock
  • 1995 JOHN DEERE 892 ELC track mounted log loader w/CWS boom & grapple, 32" triple grouser tracks, 4728.3 hrs, s/n: FF892EX11080
  • 1989 JOHN DEERE 892D-LC track mounted log loader w/JOHN DEERE boom & grapple, 28" triple grouser tracks, 5700 hrs, s/n: FF892DL005883
  • 1997 JOHN DEERE 270LC track mounted log loader w/YOUNG boom & grapple, 27" triple grouser tracks, 19,733 hrs, s/n: FF0270X070095
  • 1998 JOHN DEERE 230LC track mounted log loader w/JEWEL boom & grapple, 26" triple grouser tracks, 6319.8 hrs, s/n: FF0230X060229
  • 1973 LETOURNEAU 2594, 4 wheel drive, 40 ton log stacker, DETROIT series 60 diesel, 33.25-35 tires, 1836.6 hrs, s/n: 1144
  • 1973 LETOURNEAU 2594, 4 wheel drive, 40 ton log stacker, CUMMINS N400BC3 diesel, 33.25-35 tires, 33148.6 hrs, s/n: 1136
  • 1972 LETOURNEAU 2594, 4 wheel drive, 40 ton log stacker, CAT 3406B 450 hp diesel, 33.25-35 tires, 8328.8 hrs, s/n: 1059
  • 1972 LETOURNEAU 2594 40 ton log stacker (parts only), s/n: 1097
  • 1996 KOMATSU WA600-1LC wheel loader, MEDFORD log forks, 35/65 tires, slip bucket, 34,065 hrs, s/n: A50059
  • 1975 CAT 966C wheel loader, CAT diesel, MEDFORD 8K13 8' bucket, 23.5-25 tires, 66,934 hrs, s/n: 76J9596
  • 1972 CAT 950 wheel loader, CAT diesel engine, 8' bucket, 20.5-25 tires, s/n: 81J1516
  • 1989 SKYTRACK 9038 turbo extended reach manlift, FORD 4 cylinder turbo diesel, 9000 lb capacity, 38' boom, 48" forks, 13.00-24 tires, s/n: M714313
  • 1996, 1994 CALAVAR CONDOR RT48A articulating 4x4 manlifts, WISCONSIN 55 hp gas, 500 lb capacity, 42' boom, 24' reach, 15/38.5-16.5 LT tires, 5555, 3350.9 hrs, s/n's: P30696022, P36061543
  • (2) 1994 CONDOR 68 manlifts, FORD 4 cylinder gas, 500 lb capacity, 62' boom, 53' reach, 5082.8, 6309.8 hrs, s/n: P2566589,
  • (2) 1974 BOBCAT 743B skidsteer loaders, KUBOTA 36 hp diesel, 60" bucket w/grapples, 60" bucket, 60" sweeper, 48" forks, s/n's: 509326175, 509318009
  • 1988 HYSTER H250H forklift, 25,000 lb capacity, PERKINS diesel, 182" 2-stage mast, dual pneumatic tires, sideshift, 60" forks, 7564.8 hrs, s/n: C007003119J
  • 1999 HYSTER H210XL forklift, 21,000 lb capacity, PERKINS diesel, 148" 2-stage clear view mast, dual pneumatic tires, sideshift, 48" forks, 5894.3 hrs, s/n: E007D03765W
  • 1997 HYSTER H210XL forklift, 21,000 lb capacity, PERKINS diesel, 183" 2-stage mast, dual pneumatic tires, sideshift, 48" forks, 7616.4 hrs, s/n: E007Q0358U
  • 1984 HYSTER H200HS forklift, 20,000 lb capacity, PERKINS diesel, 212" 2-stage mast, dual pneumatic tires, sideshift, 48" forks, 4120 hrs, s/n: C007D02057E
  • 1994 HYSTER H190XL forklift, 19,000 lb capacity, PERKINS diesel, 212" 2-stage mast, dual pneumatic tires, sideshift, 56" forks, 2252.5 hrs, s/n: E007D01859R
  • 1993 CAT V225 forklift, 22,500 lb capacity, CAT diesel, 170" 2-stage clear view mast, 48" forks, MOTION TR-1-NK scales, 30,830 hrs, s/n: 2YK00107
  • (4)1979, 1978 CAT V180B forklifts, 18,000 lb capacity, CAT diesel, 218" 2-stage masts, dual pneumatic tires, sideshift, 54" forks, s/n's: 68Y01180, 68Y01049, 68Y01036, 68Y01025
  • 1990 HYSTER H90XL forklift, 9000 lb capacity, propane, 144" 2-stage mast, dual pneumatic tires, sideshift, 48" forks, s/n: F5D01972K
  • 1993 CLARK GPX50 forklift, approx 4000 lb capacity, propane, 170" 3-stage mast, pneumatic tires, sideshift, 48" forks, s/n: GPX71CU17P9060
  • 1993 CLARK GPX30-MB forklift, 3000 lb capacity, propane, 188" 3-stage mast, pneumatic tires, 44" forks, sideshift, s/n: GP138MB47170
  • 1993 CLARK GPX-25 forklift, 4000 lb capacity, propane, 188" 3-stage mast, pneumatic tires, 52" forks, sideshift, s/n: GPX2300068835CKOF
  • 1990 FORD L8000 T/A boom truck, diesel, EATON FULLER transmission, 20' bed, (5) outriggers, JLG 2200BT 22-ton crane, 80' boom, 33,557.5 miles
  • GALION 10 ton capacity crane, 40' boom, outriggers, 14.00-24 tires, s/n: C-125-GH1013
  • 1970 WHITE FREIGHTLINER WFT7564T T/A water truck, CUMMINS NTC335 diesel, ROAD RANGER RTO913 transmission, 46"x21' aluminum tank, gas pump, reel, rear spray bar, 547,001 miles
  • 1974 FORD 880 T/A live bottom chip truck, V8 gas, manual transmission, 25' 9-strand live bottom chip box, PTO, 50,655 miles
  • 1973 PETERBILT 359M T/A chip truck, CUMMINS 350 diesel, EATON FULLER transmission, 22' aluminum chip box w/dump gate, 541,176 miles
  • (2) 1999 EAGLE IND TT-12G tuggers, CHRYSLER 3.0 litre V6 , auto transmission, 6 ton capacity, 2769.5 hrs, s/n: 12048
  • 2004 CHEV SILVERADO extended cab 4x4 pickup, gas, auto transmission, 206,197 miles
  • 2003 GMC SIERRA SLC extended cab 4x4 pickup, gas, manual transmission, 100,653 miles
  • 1999 FORD F150XLT extended cab pickup, TRITON V8 gas, auto transmission, 194081 miles
  • 1994 GMC 2500 extended cab 4x4 pickup, gas, manual transmission, 184,634 miles
  • 1974 CHEV 4x4 8' steel flatbed, gas, manual transmission, 11,619 miles
  • 1967 CHEV 10, 12' flatbed banding truck, V8 , auto transmission, 12' expanded metal bed, INGERSOLL RAND 2475 11 hp gas powered compressor, 26,307 miles
  • CUMMINS NTC855 engine on stand; JOHN DEERE, LETOURNEAU, KOMATSU, HYSTER & CAT parts; slip buckets; spare tires; chains; starters; generators; cylinders; 5-1/2'x16' diesel tank; 4'x6' gas tank; 5'x10' used oil tank; (3) 3-1/2'x6' oil tanks; lube reel; oils; grease

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Thursday, April 23.
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #1960

AIRPORT & LODGING INFORMATION
  • Spokane International Airport is served by most major airlines and rental car agencies

LODGING
    Best Western Edgewater Resort - Sandpoint, ID 208-263-3194
    Eagle's Nest Motel - Priest River, ID 208-448-2000
    La Quinta Inn - Sandpoint, ID 208-263-9581
    Newport City Inn - Newport, WA 208-263-2111
    Quality Inn - Sandpoint, ID 208-263-2111

DRIVER DIRECTIONS
  • From Hwy 2 in Priest River, drive north on Bodie Canyon Road approximately 1/2 mile to the auction site, located on the left.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2009 James G. Murphy Co.
All rights reserved worldwide