Click small pics to enlarge

Click HERE for more photos


9AM - THURSDAY - JULY 30
Preview 8-4, Wednesday, July 29
1577 Glide Loop Rd, Glide, OR

Display Catalog | X Lots

Downloadable PDF Catalog

Advance Bid Center

Just Added!
  • (3) SIGNODE catalog #024770 model AMP-1-58 pneumatic strapper For use on .020-.023 steel strap, uses Signode 58/34 AMP seals
  • SIGNODE catalog #424334 model SCM 3Ú4 combination tool
  • For use on .017-.025 steel strap, seal less

Debarkers
  • NICHOLSON 35" tandem ring debarker w/27" 6-arm single ring, approx 100 hp ring drive, approx 60 hp, REX reducer feed rolls, drive, (8) spiked in & out feed drive rolls, 150 hp hydraulic unit, (3) pumps, ring pull out, 50" infeed log trough, 42' 18-arm log stop & loader (under construction), spare rolls, tool arms, s/n: 812-6076
  • SALEM BRUNETTE 27" MARK II 6-arm ring debarker w/75 hp ring drive, approx 25 hp feed drive, feed thru alligator chains, SAFTRONICS GP10 vector AC drive, s/n: 83-105654, 39' H132 infeed log haul, SKK gearhead motor, 58WD112 outfeed log haul, 2 & 3-arm log kickers, SKK gearhead motor, hydraulic unit, oiler, cab, controls, s/n: 83-105654

Cut-Off Saw-Step Feeder-Sharp Chain Canter-Horizontal Resaw
  • 60" insert tooth whole log cut off saw, 100 hp arbor drive, (4) feed thru hourglass rolls, scissor clamp, cylinder, log stop gate, pneumatic log kicker, 48' 6"x14" infeed log haul, hydraulic drive, IES 60 hp brake, hydraulic unit, (2) 50 hp pumps, accumulators, cab, controls, (14) spare 60" saws, spare cut off saw frame w/arbor, 100 hp motor
  • LINDEN 6-step 10' hydraulic step feeder w/AMFAC 10 hp/29 gpm hydraulic unit, accumulator
  • 2002 TMT sharp chain canter w/twin log centering rolls, hold downs, 20 hp, REX MARS 48 rpm reducer, SAFTRONICS GP10 vector drive, Temposonic positioned CM&E 85 RH & LH step disc canters, TOSHIBA 200 hp/1180 rpm w/(2) WEG SSW03 full digital plus 200 hp soft starters, CONCEPT SYSTEMS scanning controls, AB PANEL VIEW 600, AB RS LOGIX PLC, hydraulic unit w/(2) 40 hp pumps, accumulators, 8'x8' soundproof, air conditioned cab, s/n: 5117
  • KOCKUMS OHW-AS4 full air strain 5' horizontal twin band resaw, (2) BALDOR 200 hp/1185 rpm w/(2) SAFTRONICS AS-6-240/300 hp inertia controls, feed thru slat bed chains, knurled hold down rolls, 10' powered infeed rollcase, (4) 13"x30" rolls, 20' 2-strand H78 infeed transfer, (2) SKK gearhead motors, 8' powered outfeed rollcase, (5) knurled 12"x21" rolls, SKK 3hp/155 rpm gearhead motor, RUCKER hydraulic unit, (2) 25 hp pumps, TRABON lube system, s/n: 3549

Edgers
  • UKIAH 74223 6"x40" spline bottom arbor gang edger, LINCOLN 150 hp/1780 rpm arbor drive, SKK 5 hp/125 rpm gearhead feed drive, 5' slat bed infeed w/SKK gearhead motor, 3' 3-roll outfeed rollcase to outfeed transfers, SKK 3hp/45 rpm gearhead motor
  • UKIAH 2142, 4"x36" splined bottom arbor gang edger, RELIANCE 400 hp/1785 rpm arbor drive, knurled feed rolls, SKK 7.5 hp/45 rpm gearhead motor, press rolls, 5' powered infeed rollcase w/(5) 8"x54" rolls, SKK gearhead motor, 6' outfeed rollcase w/outfeed transfers, SKK gearhead motor
  • OPTIMIL 6"x40" splined top arbor gang edger, (2) TECO 400 hp/1785 rpm arbor drives, knurled feed thru rolls, motor to REX VENUS feed rolls drive, Temposonic positioned 10' powered infeed, 10 hp, REX MARS 48 rpm drive (not installed)
  • OPTIMIL 4"x36" splined top arbor 5-saw board edger (no drive), knurled feed thru rolls, press rolls, Temposonic positioned 10' powered infeed, 10 hp, REX MARS 48 rpm reducer (not installed)

Trimmers-Stackers-Hula Saws
  • CONVEY KEYSTONE 9' stud trimmer w/(2) 14" saws, approx 15 hp, 2-section 2-strand infeed transfer, hydraulic drive, 4' 2-strand lugged feed thru transfer to 8' 3-strand lugged incline transfer, SKK 3 hp/45 rpm gearhead motor, dual outfeed waste belts, SKK 1 hp/125 rpm gearhead motor, IRVINGTON MOORE 3320 auto face grade printer, 12"x11' outfeed transfer belt, SKK 1 hp/155 rpm gearhead motor, 4' 2-strand H78 lumber landing table, SKK 1 hp/155 rpm gearhead motor, 12' 2-strand H78 transfer, SKK 2 hp/45 rpm gearhead motor, spray station w/(2) GRACO pumps
  • 6'-10' capacity stud trimmer w/(2) 18" saws, approx 10 hp, 16' 2-strand H78 lugged feed thru transfer, SKK 1 hp/45 rpm gearhead motor, 8' 2-strand H78 outfeed transfer w/gearhead motor, 8' 2-arm mechanical tilt hoist, 48"x52" travel arms, SKK 5 hp/56 rpm gearhead motor, brake, 18' powered infeed rollcase, (7) 6-1/2"x48" rolls, SKK 1 hp/45 rpm gearhead motor, grade wheel
  • CONVEY KEYSTONE 6'-10' stud stacker w/mechanical 2-arm lumber lowering hoist, 52"x56" arms, (2) BAUER gearhead drives w/brakes, 15-1/2' 2-strand H78 infeed transfer w/dealer arms, BAUER gearhead motor, 20' powered outfeed rollcase w/(9) 6-1/2"x 53-1/2" rolls, SKK 1 hp/45 rpm gearhead motor, metal building
  • MOORE 10' stud stacker w/hydraulic 2-arm lowering hoist, 52"x54" travel arms, L-M 30 hp hydraulic unit, 11' 3-strand 81X infeed transfer, even end chain, SKK 3 hp/88 rpm gearhead motor, 31' powered outfeed rollcase w/(11) 6-1/2"x56" rolls, SKK 30 hp/84 rpm gearhead motor, air operated unit straightener, (3) sticker transfers, belt w/SKK gearhead motors
  • Hula saw system w/(2) IRVINGTON 12" air operated saws, approx 5 hp/3600 rpm, feed thru gravity rolls, lumber stops, 12"x10' outfeed belt, SKK 1 hp/155 rpm gearhead motor, 12"x14' waste belt, SKK 1 hp/155 rpm gearhead motor, 8' 2-arm mechanical tilt hoist, 48"x50" travel arms, SKK 5 hp/56 rpm gearhead motor, 10' powered outfeed rollcase, (7) 8-1/2"x15" rolls, SKK 1 hp/155 rpm gearhead motor, 6' 2-strand H78 transfer, SKK 1 hp/68 rpm gearhead motor, 7' 4-strand unscrambler, (5) sorting belts, (4) sort bins w/SKK 1 hp/56 rpm gearhead motor, metal cover

Planer-Pineapple Feed Table-Bridge-Moisture Meter-Tilt Hoist
  • COASTAL 16-knife, 4"x8" 4-head high speed planer, 80 hp top, 40 hp bottom, approx 30 hp side heads, hydraulic feed rolls, 135 hp hydraulic unit w/(3) pumps, spider, controls, electrics, spare heads, jointer bar, spare parts, s/n: CM72081
  • COASTAL 13' hydraulic dual pineapple feed table w/(4) 12"x30" smooth & semi knurled rolls, (1) 12"x15" semi knurled roll, hold over shoe, 7' 3-strand 81X infeed transfer, SKK gearhead motor
  • 6' hydraulic bridge w/12"x11" smooth, (2) 12"x11" knurled rolls, dual top knurled feed rolls
  • 4'x12' slow down belt, SKK 5hp/125 hp gearhead motor
  • 12"x9' planer outfeed belt w/stain tunnel, support equipment
  • 2006 WAGNER APEX pass thru moisture detector, s/n: APEX3104
  • 8' 2-arm hydraulic tilt hoist w/48"x62" arm travel, 5 hp hydraulic unit, 26' 3-strand H84HD infeed transfer, S-drive, SKK 7.5 hp/45 rpm gearhead motor

Dust Collection System
  • DONALDSON TORIT 232RFW-8 dust collection system (installed in 2007), approx (320) 180" bags, 1/3 hp baghouse sweep arm, 24"x24" feeder, TATUNG 5 hp, DODGE power torque reducer, 205 NYB 30ACF blower, BALDOR 75 hp, 17400 scfm @ 37.7 bhp, DRESSER ELECTRI-POWER electric valve, 36" piping to baghouse, TWIN CITY size 915 blower type RBOSW, arrangement 9BL, class 22, RELIANCE 30 hp, 16" piping to bins, WESTERN PNEUMATIC abort gate, 36" infeed piping, approx 60" cyclone & feeder on shavings bin w/16" piping, approx 48" cyclone w/rotary air lock on fuel silo
  • MURPHY RODGERS 54" long neck cyclone w/rotary air lock, 16" piping to BPS vent box, s/n: 0303011

Chip Bins-Screen-Surge Bin-Hog-Chippers-Blowers-Feeders
  • CAROTHERS approx 40-unit hydraulic bin (installed in 2007)
  • (3) CAROTHERS approx 30-unit hydraulic bins (installed in 2007)
  • KOCKUMS 1010, 3-deck chip screen w/drive, s/n: 028018
  • Approx 4'W x 5'H x 8'L live bottom surge bin w/auger, SKK gearhead motor
  • JEFFREY WB45 hammer hog, TECO 200 hp/1765 rpm, SAFTRONICS SR6-250, 200 hp drive, major rebuild in 2007 including new hammers, grates, screens, liners, bearings, 27-1/2"x41-1/2" opening, infeed chute, s/n: 12283, w/42"x42' infeed troughing belt, RENS L240 metal detector, A10-T42 coil, 5' fiberglass trough, S-drive, SKK gearhead motor
  • Jacobsen P-316D full circle pulverator hammer mill, LINCOLN 125 hp, 24"x16" augured infeed, 1/4" reversible hammers, 1/4" screen, top infeed, bottom discharge, s/n: 1833
  • KOCKUMS 3-8K, 58" 8-knife chipper, 24" RH, oversize spout, GE 200 hp/720 rpm, SAFTRONICS EX6-240, 200 hp drive, horizontal infeed, bottom discharge, 15" max log diameter, s/n: 166810, rebuilt spout, hoods, spare base, spare knife holders, anvil
  • ARASMITH 50"x38" horizontal drum chipper, LINCOLN approx 150 hp, SAFTRONICS EX6-180, 200 hp drive, drop infeed w/chute, bottom discharge, 24"x19' infeed chevron belt, 5' fiberglass trough (no RENS coil), SKK gearhead motor, spare drum
  • 1995 NICHOLSON 38"x23" re-chipper w/3ZK (no drive, not installed), s/n: 6575
  • NICHOLSON 38"x23" re-chipper w/3ZK (no drive, not installed)
  • SUTORBILT/RADER 10"x30" series 3100 blower, LINCOLN 150 hp, UNIVERSAL UCIH-14 silencer, controls, s/n: 141136
  • SUTORBILT/RADER 10"x30" series 3100 blower, TOSHIBA 125 hp, silencer, s/n: A84502
  • SUTORBILT FULLER 10"x30" series 3100 blower, TECO 75 hp, silencer, controls, s/n: 115441
  • ARCHER 10"x30" high pressure blower (no drive, not installed)
  • WESTERN PNEUMATIC 10"x30" series 4500 blower, /TOSHIBA 60 hp (not installed), s/n: 185919
  • 2000 WESTERN PNEUMATICS 30"x30" feede, TECO 7.5 hp, DODGE 25.56:1 ratio shaft mounted reducer (not installed), s/n: FDS-930-0027016
  • RADER 30"x35" feeder, TATUNG 7.5 hp, DODGE shaft mounted reducer
  • RADER 30"x30" feeder, TATUNG 5 hp, to DODGE shaft mounted reducer
  • RADER 30"x30" feeder, RELIANCE 5 hp, DODGE shaft mounted reducer
  • (2) RADER 30"x30" feeders (no drive, not installed)
  • RADER 20"x20" feeder (no drive, not installed), DODGE reducer

Compressors-Dryer-Air Receivers
  • QNW 360E rotary screw compressor, LINCOLN 100 hp, s/n: 740119
  • QNW 380F rotary screw compressor, approx 100 hp, s/n: 740957 (not installed)
  • QNW 650G rotary screw compressor, LINCOLN 150 hp, s/n: 72140 (not installed)
  • QNW 740B rotary screw compressor, GE 150 hp, s/n: 790889 (not installed)
  • QNW 950D rotary screw compressor , approx 200 hp, s/n: 740181 (not installed)
  • QNW rotary screw compressor, approx 150 hp (not installed)
  • CHAMPION 5 hp tank mounted compressor (not installed)
  • VAN AIR D60 deliquescent dryer, 2300-3900 scfm @ 100 psi
  • 5x14', 4'x10', 3'x6' air receiver tanks

Electrical
  • GE 8000 line 6-section MCC w/(31) switches
  • GE 8000 line 5-section MCC w/(26) switches
  • GE 8000 line 5-section MCC w/(25) switches
  • GE 8000 line 4-section MCC w/(16) switches
  • (2) WEG SSW03 full digital plus 200 hp soft starts
  • SAFTRONICS AS6-240, 300 hp starter
  • SAFTRONICS EX6-240, 200 hp starter
  • SAFTRONICS SR6-250, 200 hp starter
  • (2) SAFTRONICS GP10 vector AC drives
  • INDUSTRIAL ELECTRICS SERVICES 60 hp brake
  • ALLEN BRADLEY RS LOGIX PLC
  • Assortment of motors to 400 hp, (100+) SKK & SM CYLCO reducers, starters; disconnects; transformers; relays; contacts; fuses; wire & conduit lot

Filing & Grinding Room Equipment-Shop & Miscellaneous Equipment
  • ARMSTRONG #4 LH & RH bandsaw sharpeners, s/n's: 12731, 8863
  • ARMSTRONG #84 auto point, s/n: 14835
  • ARMSTRONG #4 stretcher roll w/bench, s/n: 14775
  • ARMSTRONG 3-10C stretcher roll, s/n : 9649
  • WRIGHT W1600 tipper
  • WRIGHT W1801 side grinder
  • WRIGHT W1700 facer, s/n: 1712
  • ARMSTRONG #17 circle saw sharpener, s/n: 3864
  • (2) ARMSTRONG #16 circle saw sharpeners, s/n's: 15672, 9838
  • ARMSTRONG TALLBOY circle saw sharpener
  • ARMSTRONG hand sharpener, s/n: 7918
  • VOLLMER CANA/SLII facer, s/n: 1110
  • (5) VOLLMER PMH auto swaggers, s/n's: 683, 550, 240
  • NIELSEN F520 facer, s/n: 72A54
  • GOCKEL G40EL travel bed grinder, 40" magnetic chuck, s/n: 6681
  • UTC 250 travel bed grinder, s/n: 1226
  • ARASMITH lily pad chipper knife grinder
  • (14) Spare 60" insert tooth saws; spare band & round saws; ARMSTRONG swages & shapers; 5"x17" anvil; 5"x12" anvil; (2) 4"x16" anvils; chipper knives; AIRCO 300 amp AC/DC heli welder
  • AMERICAN 4' radial arm drill, 10" column, 30-700 rpm spindle speeds, T-slotted knee & base; 19"x60" quick change engine lathe, 3 & 4-jaw chucks, 1-1/2" thru hole, steady rest, s/n: 10883; hydraulic shop press w/ENERPAC 10,000 psi pumps; ACCO WRIGHT 4000 lb cable hoist, 55' drum, 45 fpm; (2) 8'x9-1/2'x40' CONEX boxes; LANDA spray jet washer; OPTIMIL 10' scanner, (9) INDUSTRIAL chop saws, (7) LH , (2) RH; ECO RH chop saw; PACIFIC SCALES 450 10,000 lb x 2 lb platform scales, 4'x6' deck, s/n: T98-849; (20) lumber carts w/48"x72" centers; MABELL RR6 6' motorized feed rolls; ALEXANDER DODDS MB8418-363 motorized router; FULUNG AUTO ROD rod machine; 24" dual sided lumber swede w/knurled rolls, 10 hp; COE 566445 RH slabber, 6-knife, 26" face, 150 hp; NASH size SC6/4 vacuum pump w/BALDOR 50 hp; hydraulic units to 80 hp; GREENLEE no. 445 tilting table saw; (5) scissor hoists to 6000 lb; large quantity mill chain; 30"x72" scalping rolls; 9"x10' twin screw auger w/HITACHI 5 hp/40 rpm gearhead motor; 4'x7' condensate tank; all steel log bunks; lath; lumber wrap; lumber covers; office furniture; van or box car loading ramps; steam turbines; feed water pumps; belting; air receivers; forklift forks; centrifugal pumps; FPE type LI 13.8 kv load interruptor; TENNEY Kold-Pak air dryer; HANKISON 8045, 125 psig compressed air dryer
  • WEST SALEM MACHINE PK PK60DB 5-knife chipper, 150 hp, Slant horizontal in-feed, bottom discharge, s/n: 6564B; (1) SKK w/TOSHIBA, output 420, power 20, ratio 14.16, rpm 1800/900; (1) SKK, 5 hp, 1750 rpm, output 25; (1) SKK 5 hp, ratio 1:25.735, rpm 68; (1) SKK 2 hp, output 280, ratio 1:6.25; 24Óx60Ó air silencer; (2) hydraulic accumulators; 32Óx 24Ó dia idler roll; CMT flying saw, 10Õ panel; 250, 500 gal air tanks; (4 sets) forklift forks; ELLIOT heavy duty switch gear, ERMHG-15-3115-LT GMSPA, 600 AMP; RELIANCE vari drive, ratio 31.4, 1730 rpm, xip 10, ratio 31.4 1730 rpm, xip 16, HAMPTON SKWE, ratio 10:1, speed type 100, US Series 2000, output torque 20,140, ratio 100 input rpm 1750; REX 14,000 torque, RELIANCE 5 hp, service hp 175, ratio 43/76, out 40; BALDOR 3 hp 1730 rpm; HANKISON air dryer; TENNEY Kold Pak air dryer; YALE 3000 lb floor jack; (2) ANSUL halon 1301 fire systems for computer room; loading ramp; loading dock; 24Óx26Ó , 17Óx26Ó, 19Óx20Ó conveyor pulleys; (2) paint mixers; rolls; drying oven
  • RIDGID 535, 300 Power Threaders; RIDGID 48Ó, 36" Pipe Wrenches; RIDGID 550 Sawzall; HILTI DX600N Powder Accuated Nailer; MILLER Softcase Xtreme 12VS Welder; (2) Cutting Torches; Clevises; MILWAUKEE Super Hog; MILWAUKEE L Head Grinder; MILWAUKEE Mag Drill; ENERPAC Cylinder & Pump; Firehose Clamp; Step & Extension Ladders; Pipe Test Plugs; Sockets & Wrenches; ENERPAC 50 Ton Hollow Cylinder H606; 4" Bench Vise w/Swivel Base; Appliance Dolly; BLACK & DECKER Work Mates; Banding Machine; Rope; (2) Large Wire Reel Stands; (2) Greenlee Wire Reel Stands; DEWALT 1/2" Electric Impact Wrench; Vice Grips; Forklift Propane Tank

Vibratory Conveyors-Log Decks-Transfers-Hauls-Lumber Transfers-Conveyors-Rollcases
  • MILL POWER 24"x100' balanced vibratory conveyor, TOSHIBA 20 hp, 1 1/16" stroke
  • MILL POWER 24"x56' balanced vibratory conveyor, TOSHIBA 20 hp
  • MILL POWER 24"x44' balanced vibratory conveyor, TOSHIBA 10 hp, 450 rpm, 1" stroke
  • RENS L240 metal detector, 6' fiberglass trough, s/n: 88088
  • WSM CSC17 36"x22' balanced vibratory conveyor w/16' fines drop out, TOSHIBA 10 hpr, s/n: 253185
  • 19' 6-strand H124 log deck, S-drive, WESTERN reducer
  • 19' 3-strand H124 log deck, S-drive, 13' LS&L, BALDOR motor, REX reducer
  • 19' 3-strand H124 log deck, S-drive, 13' LS&L, SM CYCLO gearhead
  • 56' 5-strand WR82 log transfer w/(2) sets of (4) log gates, S-drive, SKK 10 hp/37 rpm gearhead motor
  • 12' 7-strand WR82 log transfer w/(2) 17' 4-arm LS&L, S-drive, SKK gearhead motor
  • 58' 1-strand WD112 log haul, 2 & 3-arm log kickers, steel trough, SKK gearhead motor
  • 48' 1-strand 6"x14" log haul, H&T drums, steel trough, SKK gearhead motor
  • 39' 1-strand H132 log haul, H&T drums, steel trough, SKK gearhead motor
  • (20) Transfers to 62' w/(17) SKK & (3) other drives
  • (8) Chain conveyors to approx 120' w/all SKK drives
  • (13) Belt transfers to approx 70' w/(12) SKK drives
  • (4) Rollcases to 20' w/all SKK drives

Buildings
  • 18' eaves-22' peak x 30'W x 40'L all steel clear span building

Rolling Stock
  • 1987 CAT 988B rubber tire log loader w/MEDFORD forks, MICHELIN 35/65R33 tires, 20,683 hrs, s/n: 50W08007
  • 1994 CAT 950FII rubber tire log loader w/6' heavy duty forklift type forks, 20.5-25 tires, 35,000 hrs, s/n: 8TK01235
  • 1997 HYSTER H250XL2, 25,000 lb forklift, PERKINS diesel, 183" 2-stage clear view mast w/swing & sideshift, 44" fork, dual pneumatic, 4830 hrs, s/n: E007D03042U
  • 1997 HYSTER H155XL2, 15,500 lb forklift, PERKINS diesel, 212-1/2" 2-stage clear view mast w/sideshift, 52" forks, dual pneumatic tires, 5125 hrs, s/n: F006D04196U
  • 1994 HYSTER H155XL2, 15,500 lb forklift, PERKINS diesel, 133-1/2" 2-stage mast w/sideshift, 54" forks, dual pneumatic, 2500 hrs, s/n: F006D02171R
  • 1994 HYSTER H90XLS, 9000 lb forklift, propane, 194" 3-stage mast w/sideshift, 48" forks, solid tires, s/n: G005D0383OR
  • 1989 HYSTER H80XL, 8000 lb forklift, diesel, 177-1/2" 3-stage mast w/sideshift, 48" forks, solid tires, hydraulic winch, 206 hrs, s/n: F005D0254K
  • SNORKELIFT A42R manlift w/42' boom, 30"x60" basket, 500 lb capacity, gas, 12-16.5 tires, s/n: 871660387

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Friday, July 31.
  • A 25% deposit is required by the close of business, auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #1960

LODGING INFORMATION
    Best Western Garden Villa Inn - Roseburg541-672-1601
    Comfort Inn - Roseburg541-957-1100
    Holiday Inn Express - Roseburg541-673-7517
    Howard Johnson - Roseburg541-673-5082
    Super 8 - Roseburg541-672-8880

DRIVER DIRECTIONS
  • From I-5 take the City Center/Diamond Lake/Hwy 138 exit (#124).
  • Drive east and follow signs to N Umpqua Hwy/OR-138.
  • Continue east then north on Hwy 138/N Umpqua Hwy approx 16 miles to Glide Loop Rd.
  • Turn left and drive approx 1 mile to mill site, located on the right.

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE



Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2009 James G. Murphy Co.
All rights reserved worldwide