|
GEORGIA-PACIFIC
TUESDAY - JUNE 23 - 10AM
Preview 10 to 4, Monday, June 22
South Boston, VA
Past Auction - held in 1997/98
|
|
FLAKERS
|
1975 PALLMANN P2K15 pulverizing flaker, 350 hp drive, 460V, s/n: 10373002
1964 PALLMANN PZ12 pulverizing flaker, 100 hp drive, 460V, s/n: 1364066
Assortment spare flaker parts, 75 hp take away blower, auger feeds w/ERIE Z
25x18HCC drum magnet
GLUE DECK
30"x50' troughing roll weight belt w/MERRICK belt scale, digital readout
1980 LITTLEFORD BROS 8' blender, 100 hp drive, max w.p. 75 psig @ 400
degree F, s/n: 11266
100' screw auger conveyor between blender & former feed bins w/AC
adjustable frequency drive
PARTICLEBOARD FORMING LINE
1985 SCHENCK 5' fines bottom face particleboard former w/doctor roll, feed
hopper
1985 SCHENCK 5' fines top face particleboard former w/doctor roll, feed hopper
(5) SIEMPELKAMP 5' core flake particleboard formers w/doctor rolls, feed
hoppers
2-strand x 120' caul plate feed-thru forming line transfer, RETTLERS overs
conveyor system w/(7) auger & pan cleanouts under formers
PRE PRESS
SIEMPELKAMP 5'x16' 9-ram hydraulic particleboard pre press w/hydraulic
units, 22' feed thru caul plate belt transfer
PARTICLEBOARD HOT PRESS
SIEMPELKAMP 5'x16' 20-opening hydraulic operated, simultaneous closing
particleboard hot press, 3/8" to 1-1/2" thickness capacity, w/20-opening
elevating loader, single pass charger, outfeed caul plate/panel separator,
panel unloading elevator, caul plate
recycle elevator, 50' caul plate recycle transfer, hydraulic units,
controls, electrics
|
|
PARTICLEBOARD COOLING LINE
|
16' outfeed rollcase from press unloader w/5'x16' top panel feeder,
hydraulic scissor lift
75' panel belt transfer to cooling tunnel w/belt scale
120 panel capacity cooling tunnel w/exhaust fans, feed thru chains, 25'
outfeed rollcase
|
|
16' GLOBE SKINNER SAW LINE
|
18'x16' wide 5-strand roller chain infeed w/panel evening roll, adjustable
panel cross cut saw, motor, reducer
GLOBE 5' panel side trim skinner saw, 20 hp, 3515 rpm arbor motors, power
feed rolls, pneumatic hold down rolls, infeed rollcase, mechanical feeder
17' oufeed rollcase w/3-strand cross roll jump chain, outfeed transfer
feeding, (3) adjustable panel cross cut saws
GLOBE 16' capacity panel end trim saw w/ stationary 20 hp, 3800 rpm end
trim saw, (3) adjustable selective cross panel cutoff saws, feed thru lug
chain transfer, adjustable hold down arms, manifold, electrics
GLOBE panel stacker, adjustable to 16', w/50"x17' mechanical lift powered
rollcase
35'x60" powered outfeed package rollcase
|
|
SLAT BED SAW
|
MEREEN JOHNSON 435H 10' slat bed panel saw w/(7) adjustable saws, manifold,
electrics, spare blades
|
|
SANDER
|
TIDLAND 99-453 4-head, 4'x8' panel belt sander, 125 hp top & bottom front
heads, 100 hp top and bottom back heads, s/n: 18850, w/power rollcase
infeed , panel centering rolls, hydraulic power outfeed rolls, 6-strand
4"x12' belt outfeed transfer, hydraulic
support unit, manifold, electrics
|
|
ROTARY DRYERS
|
MEC 12'diameter x 40' hot air or propane fired rotary drum dryer, 25 hp
drive, burner, PHELPS 75 & 10 hp burner blowers, TECO 500 hp, 1785 rpm,
460V blower, 20" rotary airlock feeder, 8'x9'x15' 6-auger feed feed bin
(2) MEC 12' diameter x40' hot air heated triple pass rotary drum dryer, 25
hp drive
20" rotary air lock feeders, 6-auger feed bins, 50 hp drives, SM CYCLO reducers
8-1/2' diameter x80' hot air heated rotary drum dryer, 20 hp drive, 150 hp
blower, auger feed w/35'x8'x10' aluminum feed bin & 8' wide live bottom belt
|
|
BOILER
|
1960 EKCO KEELER 250 lb waste wood oil fired water tube type boiler w/(3)
9' auger feed conveyors, DC drives, tanks, pumps, piping, valves,
electrics, McBURNEY burner
|
|
COLLECTION SYSTEMS
|
(2) 1994 FISHER KLOSTERMAN XQ120-42-2 dual high efficiency cyclone systems
w/ 3/16" mild steel cyclone sidewalls, 3/16 AR scroll inlets, common
receiver hoppers, CLARK CFV 24 feeders, IAP 56,000 CFM, 400 hp intake
blowers
|
|
BAGHOUSES
|
(3) CARTER DAY 320 bag dust collection baghouses, 33,000 CFM
(2) PNEUMAFIL dust collection baghouses, w/1500 s.f. cloth space, 32,000 CFM
PNEUMAFIL dust collection baghouse, 750 s.f. cloth space, 16,000 CFM
CARTER DAY 6'x40"x40" lab baghouse w/blower & cyclone
(20+/-) cyclones w/airlocks throughout plant site
GRECON fire & smoke detection system
PYR-A-LARM fire & smoke detection system
Large quantity bags & cages
|
|
CHIPPERS
|
ARASMITH 30"x36" drum chipper, 75 hp, 1775 RPM
ARASMITH 72"x50" drum chipper
|
|
SCREENS
|
ROTEX 532A AL/M8 5'x10' 2-deck shaker screen, s/n: R460874
ROTEX 522CS GP 5'x10' 3-deck shaker screen, s/n: R27107
ROTEX 832 10'x42" shaker screen, s/n: 26375
ROTEX 12-1/2'x5' 3 deck screen
Assortment of screen frames, balls, screen stock
|
|
FEEDERS
|
RADER 20x20 ESW chip feeder w/drive, s/n: 4394
(2) RADER 20x30 ESW chip feeders w/drive, s/n's: 4398, 4240
WESTERN PNEUMATICS 12x16 chip feeder w/drive
|
|
HIGH & LOW PRESSURE BLOWERS
|
FULLER 8x20, 4500V series rotary lobe blower, 75 hp, silencers
(4) 1984 GSM size 29 48" blowers, 150 hp
(2) 42" blowers, 75 hp
30" blower, 30 hp
(2) 40" blowers, 60 hp
40" blower, 30 hp
60" blower, 150 hp
|
|
GRINDING EQUIPMENT
|
HANCHETT 84" traveling bed straight knife grinder w/magnetic chuck
HANCHETT 163" traveling head straight knife grinder
Drum chipper knife grinder
|
|
ELECTRICAL(PARTIAL LISTING)
|
WESTINGHOUSE 4-section MCC w/(4) size 5 mag starters, 400 amp breakers
ALLIS CHALMERS 4-section 41-station double sided MCC
ALLIS CHALMERS 4-section 36-station double sided MCC
ALLIS CHALMERS 2-section 9-station double sided MCC
ALLIS CHALMERS 2-section 14-station double sided MCC
ALLIS CHALMERS 2-section 12 station double sided MCC
ALLIS CHALMERS 3-section 15-station double sided MCC
ALLIS CHALMERS 1-section 11-station double sided MCC
ALLIS CHALMERS 5-section 30-station double sided MCC
WESTINGHOUSE 4-section 7-station MCC
(4) WESTINGHOUSE Vectral Energy Saver solid state reduced voltage starters,
500 hp/480V, w/1000 amp breakers
(6) ALLIS CHALMERS Across the Line mag starters, 250 hp, w/500 amp breakers
Adjustable frequency AC motor controllers including: (11)TOSHIBA 5 hp,
ALLEN BRADLEY 15 amp, (3) ALLEN BRADLEY 7-1/2 amp, (3)WER 3 hp
75KVA transformer,120-208/480V, 3 phase w/breaker panel
30KVA transformer, 120-208/480V, 3 phase, w/breaker panel
ALLEN BRADLEY PLC remote racks w/power supplies
Large quantity MCM conduit & wire
|
|
ROLLING STOCK
|
HYSTER S80E 8000lb HRT forklift, propane, 218" lift, s/n: C004D074445
(2) CLARK L500-55 5500lb HRT forklifts, propane, s/n's: 355-252-5121-183,
355-1733-4635-381
PETTIBONE pneumatic forklift, DETROIT diesel
FMC 2-984 3-wheel power sweeper, diesel, w/30" rotary front corner brush,
55" main brush, s/n: 984-4632
(2) New BRUDI 12,000lb forklift masts
(2) manlift platforms
|
|
CHIP TRAILER DUMP
|
65' trailer dump platform w/35'x10'x12' chip hopper, 6-strand H110 box
chain live bottom
|
|
STORAGE BINS
|
8'x12'x16' steel fines storage bin w/8-auger cleanout
(2) 8'x12'x16' steel fines storage bins w/single auger cleanout, 10" rotary
airlocks
15' diameter x 25' concrete fines silo w/DC drive cleanout belt, (2) airlocks
(2) 17' diameter x 30' steel core & texture material storage silos
w/ratchet screw unloaders
|
|
CONVEYORS(PARTIAL LISTING)
|
(30+) auger screw conveyors, 3' to 60'35'x24" cleated belt
conveyor60'x24" belt conveyor21'x14" belt conveyorLarge selection
troughing roll conveyor frames60' H116 box chain conveyor
|
|
BUILDINGS(FOR REMOVAL)
|
30'x50'x40' eave bolted/welded steel boiler building w/addition
110'x22'x50' eave bolted/welded steel flaxer building
40'x70'x45' eave bolted/welded steel screen building
60'x28'x20' eave bolted steel PSKM building
50'x35'x13' eave clear span bolted steel sawdust storage building
95'x30'x22' eave clear span bolted steel flaker building w/18'x70'x13'
extension
25'x30'x25' eave bolted steel frame/wood truss open side wet screen building
|
|
QUALITY CONTROL LAB
|
8'x13', 51"x64" formaldehyde test chambersTINIUS OLSEN 2000lb capacity
stress tester, s/n: 87087-2BLUE M 650 degree F test ovenTORBAL, METTLER
160 gram, 2000 gram enclosed scalesBECKMAN 3550ph
meters(3)humidifiersATLAS #78 shaperACCU vac-u-liftIAC
hearing test stationultrasonic cleanerPlus: hot plates, glassware, test
tube heaters, lab cabinets & countertops, more
|
|
TANK FARMS
|
31'x94" diameter #6 fuel oil tank w/cradles
26'x94" diameter hydraulic oil tank w/cradles
12'x45" diameter diesel tank w/pump, cradles
Selection of urea solution, formaldehyde resin, wax emulsion, aqua ammonia
tanks w/pumps
|
|
MISCELLANEOUS
|
PROGRESSIVE SYSTEMS 4'x8' hydraulic panel stacker & feeder
DRI-QUICK 5'x25' printed board top & bottom infrared drying line w/2-strand
feed thru transfer, blower, electrics
ZEKS 600HRA air dryer, 600SCFM, 100 PSIG
ORIAD 3066 air dryer, 100 SCFM
Plus: (100+/-) spare motors, CUMMINS V504F2 diesel engine, REN 30"x30"
inside diameter wrap around metal detector, (2) LINCOLN 225 amp welders, DO
ALL band saw w/60" throat, mill chain, shafting w/racks, valves, industrial
intercom system, self dumping ho
ppers, cutting & shop tables, clean up tools, CRAFTSMAN table saw, dock
plates, strapping carts, double end grinders, vises, lathe tooling,
shipping scales, trash carts, yard lights, XEROX 1025 copier, large
selection of office desks, chairs, files and much more
|
|
TERMS & CONDITIONS
|
10% Buyers Premium
PAYMENT: Full payment must be made by no later than 4 pm, Wednesday, June 24.
A 25% deposit is required by the close of business, auction day.
Cash, cashiers check, Master & Visa Cards only.
Personal or Company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction. Small purchases
must be removed 1 hour after the sale or 8:30am to 4:30pm, Wednesday &
Thursday, June 24 & 25. Large equipment & building removal schedule
announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence
over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on
a separate and/or aggregate basis.
Washington Auctioneers License #48
|
|
AIRLINES & RENTAL CARS
|
Raleigh-Durham International Airport, located in N. Carolina, is
approximately 75 miles from the auction site. The airport is served by
Delta, TWA and other airlines and most major rental car companies.
LODGING
DAYS INN 804.572.4941
SUPER 8 800.800.8000
BEST WESTERN 804.572.4311
HOLIDAY INN EXPRESS 804.575.4000
|
|
DRIVER DIRECTIONS
|
From Raleigh-Durham International Airport, take I-40 towards Durham. From
I-40 take I-147 exit to State Hwy 55. Take State Hwy 55 north to Hwy 501
then Hwy 501 to South Boston, VA. At Hwy 501 & Hwy 58 East in South
Boston, turn right on Hwy 58 East and
drive 7/10 mile to Hwy 360. Turn left on Hwy 360 & drive 2-3/10 miles to
Hwy 879. Turn right on Hwy 879 and drive 9/10 mile to the auction site.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
|
Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions
Registration Form | Advanced Bid Overview | Terms & Conditions
 Back to Top
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|
