|
WESTERN FURNACES
July 16, 1998
BELLEVUE, WA
Past Auction - held in 1997/98
|
|
CNC/NC EQUIPMENT
|
CINCINNATI 10VC-1250 Vertical Machining Center, Acramatic AC900 controls,
X-50", Y-26", Z-20", 36"-6" Spindle to Table, 40-4000 RPM
MONARCH 75 CNC Turning Center, GE1050T, 20" Swing Over Bed, 12" Swing Over
Cross Slide, 3.06" Hole, 78" Centers, 10" 3-Jaw Power Chuck, 25 HP, 1979
WARNER & SWASEY #1SC N/C Turning Center, 10" Chuck, W&S 5300 Control
D & D Mini-Turn N/C Chucker
EMCO MAIER Compact 5 CNC Lathe
ROKU-ROKU Vertimac-0 Vertical Machining Center, F6M Control, 30"x20" Table,
X-19.7", Y-15.8", Z-13.8", 63-2800 RPM, #40 Taper, 8 ATC, 3HP, 1980
GIDDINGS & LEWIS #10HS Horizontal Machining Center, (2) Built-In Rotary
Tables, X-72", Y-36", Z-20", G&L 800 CNC Controls, 24 ATC, 1976
CINCINNATI 30" x 60" NC Two-Spindle, Bridge-Type Profiler, 30"x72" Table,
X-68", Y-38", Z-16", 15" Spindle Centers, Ball Screws, Bendix
(2) PRATT & WHITNEY WILSON NC Profilers, 4 Spindles, 60"x 144" Table,
X-144", Y-28", Z-18", 12" Centers In-Line, 50 HP AC, 60 HP DC Spindle
Drives, Ball Screws, Hydraulic Servos, AB4500 w/Greco Floppy Drive
EMCO MAIER F-1 CNC Mill
CINCINNATI 20" Dia. NC Rotary Table, 1 Degree, Air Bearing
|
|
LATHES
|
NILES 102" Swing x 49'-4" CC Engine Lathe, 84" Swing over Slide
LEBLOND 50" x 228" Raised Engine Lathe, 38" Swing Over Cross Slide, 255
RPM, Threading, 4-Jaw Chuck
VDF #W50 44" x 472" Engine Lathe, 32" Swing Over Cross Slide, 2 Carriages,
Threading, 50 HP, 1952
MONARCH #27N 42" x 132" Raised Engine Lathe, 26" Swing Over Cross Slide,
16-303 RPM, DC Feeds
POREBA TR-100C Facing/Sliding Gap Lathe, 63" Swing in Gap, 39.4" Swing over
Bed, 24.7" Swing over Saddle, 26" Length in Gap, 5.1" Bore, 59" 4-Jaw
Chuck, Threading, 6.3-630 RPM,1967
POREBA #TRA-90 35" x 33' Engine Lathe, 23" Swing Over Cross Slide, 2
Carriages, (1)w/Taper, 4-1/8" Hole, 27 HP,1966
MONARCH #27N 30.5" x 132" Engine Lathe, 15.5" Swing Over Cross Slide, 8-405
RPM, Taper, Threading, 3 & 4 Jaw Chucks, Roller Rest, 20HP, Sokki DRO
GRAZIANO SAG 508 20" x 80" Engine Lathe
VOEST 20" x 60" Engine Lathe, 3 & 4 Jaw Chucks, Trav-A-Dial, '60's
ROYAL 18" x 60" Engine Lathe, 11" Swing Over Cross Slide, 80-1600 RPM,
2-1/8" Hole
BIRMINGHAM #TX-1764 Engine Lathe, 4" Spindle Hole
AXELSON 16-1/2" x 54" Engine Lathe, Taper Attach, 10HP
HARRISON Mk. III 15" x 40" Engine Lathe, '70's
CINCINNATI 15" x 54" CC Engine Lathe,
ROCKWELL 14" x 40" Engine Lathe
CLAUSING 13" x 36" Engine Lathe
CLAUSING #5914 12" x 40" Engine Lathe, Taper Attachment
CLAUSING #1514 12" x 40" Engine Lathe
New BIRMINGHAM #TDC-1237GH Geared Head Bench Lathe w/Stand, Accessories
GRAZIANO SAG12 Toolroom Lathe, 75-2000 RPM, Aloris Toolpost on Compound,
Duplomatic T-50 Tracer
(2) BIRMINGHAM 9" x 20" Lathes
|
|
TURRET LATHES & AUTOMATICS
|
HESTIKA Turret Lathe
WARNER & SWASEY #5 Turret Lathe
WARNER & SWASEY #4 Ram-Type Turret Lathe
SENTINEL CRIDAN "B" Semi-Auto Threading Lathe
|
|
CYLINDRICAL GRINDERS
|
NORTON LCTU 24" x 96" Plain Cylindrical Grinder, 30" x 6" Wheel, Dulitru
Dresser, 20 HP, Plunge, Paper Filter Coolant System, 1970
LOBDELL #5GHV 44" x 20' Roll Grinder, 26' Bed, Cambering, AC Motors, Rebuilt
UNION 20" x 98" #SU315 x 2500 Universal Hydraulic Cylindrical Grinder, 20"
x 5" Wheel, 9 HP, 1979
BROWN & SHARPE #1448 "Microstatic" 14" x 48" Plain Hydraulic Cylindrical
Grinder, Plunge Feed, 30" x 7" Wheel, 15 HP 1971
SCHAUDT #AR-200 12" x 79" Plain Hydraulic Cylindrical Grinder
SCHAUDT #AR-1500 12" x 60" Plain Hydraulic Cylindrical Grinder
CINCINNATI 12" x 36" Universal Cylindrical Grinder, Hydraulic, Infeed,
Sparkout, Internal Attachment
SHEFFIELD #180 10"x 24" Crush Cylindrical Grinder
LANDIS 6" x 18" Cylindrical Grinder
|
|
SURFACE GRINDERS
|
NIPPEI THOMPSON #C35 14" x 60" Surface Grinder, Hydraulic, 20" Wheel, Mag
Chuck, Auto Down Feed, Spark Out, 30HP Drive, 1967
ELB #SW6VAII 14" x 24" Surface Grinder, Hydraulic, 24" Table to Spindle
Centerline, 12" Wheel, O.S. WALKER 14"x 24" Electromag Chuck, Neutrofier,
Incremental Downfeed, 8.1/9.7 HP
BLANCHARD 18/30 Rotary Surface grinder, 25 HP, Electromagnetic Chuck &
Neutrofier, Mag Chuck
MATRIX THOMPSON #C4 12" x 48" Surface Grinder, Hydraulic, 15 HP, Coolant
ARTER #B30 Rotary Surface Grinder, 10 HP Wheel Motor
PETERSON #1053 Rotary Surface Grinder, 7.5HP, 33" x 29.7" x 66" Workpiece
Cap., 16" Wheel
COVEL #5 Surface Grinder
|
|
OTHER GRINDERS, LAPPERS, AND HONES
|
HEALD #72A Internal Grinder, Red Ring 27,000 RPM Spindle, 5HP Spindle
HEALD #274 Internal Grinder, Extended Bridge, 48" Table
HAUSER #3SM Jig Grinder, HAUSER Rotary Table
BRYANT #112 Internal Grinder, 13" Swing, 20" Stroke, 9" Depth of Hole
EXCELLO #33 Thread Grinder, 6" x 18", (5) Leadscrews
CHURCHILL #EC Centerless Grinder, 8" Wide Wheels, 30 HP Grind Wheel, 2 HP
Regulating Wheel
SCRIVENER Centerless Grinder, 1/4" - 5" Dia. Cap., Coolant
REINECKER #WZS3-1 Universal Tool & Cutter Grinder, 10" Dia x 25" CC, 14"
Grind Length, Tilting Wheelhead, Spiral Grind Attachment
NORTON Tool & Cutter Grinder
CROSBY Unirad Radius Grinder, Radius Fixture
CINCINNATI #1 Tool & Cutter Grinder
HAMMOND Double End Carbide Grinder
BALDOR #1216W 3HP Pedestal Grinder
JET #BCG-6 Double End Carbide Grinder
STANDARD ELECTRICAL TOOL #50 Snagging Grinder
5HP Double End Pedestal Grinder
3 Wheel Belt Sander
DANKAERT 45" Twin Belt Woodworking Sander, (2) 24 HP Motors, Power Dust
Brush w/Hood
ENGELBERG 6" Wet/Dry Belt Grinder
NATIONAL Burr-O-Matic #241 Abrasive Wet Sander
RAMCO #2400B 24" Width Brush Sander
QUEEN CITY Pedestal Grinder
SIOUX Valve Seat Grinder
VAN NORMAN #500 Valve Grinder
INGERSOLL Auto Cutter Grinder
SPITFIRE 6PT/T888.24PN 24" Lapper, 3 Rings, Holddowns+C688+C706
B.S.A. 26" Lapper
ALMCO #2SF-48A Spinner-Type Finishing Machine, 2 V.S. Spindles
ROSEMONT 18 CU. FT. Vibratory Deburr Machine
NAGEL #VSR 10-150 Vertical Hone, 59" Stroke, 15" Throat, 10 Hone Heads to
10" Diameter, Auto Sizing
|
|
MILLING MACHINES & PROFILERS
|
WMW HECKERT #FZ12-11-04/32-32ST Double Column Planer/Miller, 49" x 40" x
157" Capacity, 42 HP Rail & Side Heads w/#60 Taper, 1984
SIP #7P Hydroptic Jig Borer, Tooling, Cabinet
SIP #6 Hydroptic Jig Borer, 24" P&W Precision Rotary Table, Tooling
(2) PRATT & WHITNEY #BG21 Keller Machines Type 10' x 4', #M1740, (2)
Spindles on 30" Centers, # 50 Taper
WILSON 4-Spindle Profile Mill with Porter Heads, Tracer
KNIGHT Electo Mill, 24" x 36" Table, 36" Rotary Table, X-30", Y-30", 34"
Total Throat, 14" Height, 100-2500 RPM
KNIGHT No. 60 Jig Borer, 28" x 18" Travels
New ACCU #AC-2V 9" x 49" Vertical V.S. Mill, Ball Screw Table, 3 HP
New JBK #61150 Vertical Mill, 10" x 50" Table, R-8, 3HP Vari-Speed, Newall
2-Axis DRO, Longitudal Power Feed, Collets, Clamp Kit, 6"Swivel Vise, Motor
Starter
BRIDGEPORT Series II Special Mill, 2J Head, Power Feed, 2 Axis DRO
CINCINNATI Toolmaster Mill, TPC Control
BRIDGEPORT NC Vertical Mill, MOOG Control
CINCINNATI Toolmaster Mill
HITACHI SEIKI #2MV Vertical Knee Mill
HITACHI #2ML-V Vertical Knee Mill, 10" x 53" Table, 28" x 10" x 13.6"
Travels, 7. 5 HP
KEARNEY & TRECKER #2K Vertical Mill
CINCINNATI #430-18 Vercipower Horizontal Mill, Independent Power Overarm,
80" x 18" Table, 42" x 14" x 20" Travels, Tooling, 1967
OKK MKH-5P Knee-Type Plain Horizontal Mill, 18" x 95" Table, 41" x 16" x
20" Travel, #50 Taper w/Power Drawbar, 16-1600 RPM, 30HP, Vertical
Attachment, 1966
KEARNEY & TRECKER #415-S15 Plain Horizontal Mill, '60's
(2) KEARNEY & TRECKER #3CH-10HP Plain Horizontal Mills
CINCINNATI #5 Plain Horizontal Mill
(2) HITACHI No. 4M Plain Horizontal Mills
CINCINNATI #4 Plain Horizontal Mill, Arbor Supports
(3) CINCINNATI #3 Plain Horizontal Mills, H.S. Dial Type, Vertical Head, 2
Arbor Supports
KEARNEY & TRECKER #3K Plain Horizontal Mill
KEARNEY & TRECKER #2H Universal Horizontal Mill, H.S. Universal Head, Arbor
Support
(5) KEARNEY & TRECKER #2H, 2K Horizontal Mills
KEARNEY & TRECKER #3B Horizontal Mill
BROWN & SHARPE #2 Universal Mill, Universal Head
CINCINNATI BICKFORD 3' x 12' Planer Miller, C216 Milling Attachment on Rail
Portable Milling Machine made from Bridgeport J-Head, 42" Cross Sliding
Table on 20" Rotary Table
ARROW Open-Sided Profiler, 144" x 42" Table, Hydraulic Spindle Drive,
ROSEBROOK Tracer
CINCINNATI #1630 Vertical Hydrotel, 360-3D Auto Valve, Hand Controls
CINCINNATI #1630 Vertical Hydrotel, Hand Controls, 180 Valve, 33-2000 RP
CINCINNATI #1630 Vertical Hydrotel, ROSEBROOK 2000-3D Valve, 33-2000 RPM
RAMBAUDI Ramcop 1000 2-Spindle Profiler, 9 HP Heads, ROSEBROOK 3000-3D Valve
(3) RAMBAUDI Ramcop 1000 2-Spindle Profilers, 9HP Heads, True-Trace 1110
360-3D Valve
RAMBAUDI Ramcop Single Spindle Profiler
(4) GORTON 2-30 Tracemaster Vertical Profilers, (2) w/Man-Au-Trace 360-3D
Valves
BRIDGEPORT 2-Head Profiler, True-Trace Valve
ONSRUD Pin Router
TENSILKUT #10-82 Pin Router, 3 HP
ONSRUD Table Router
GORTON #3-L Engraver
GORTON #P2-2 Engraver, 1/2 HP, Fonts
HERMES #ITF-V Engraver, 12" x 18" Range, 1/15HP, 10,000 RPM
HORIZONTAL BORING MILLS - BOREMATICS
FMUA (CERUTI) #150-AFM 5.9" Floor Type Horizontal Boring Mill, 82"
Vertical, 118" Longitudal 1000 RPM, 29" Facing Head, Floor Plates
SELLERS 5" Table-Type Horizontal Boring Mill, 36" x 72" Table, 60" Cross,
48" Vertical, Outboard
KAUKAUNA 5" Floor Type Horizontal Boring Mill
TOSHIBA 4" #BP10B-P1 4" Table Type Horizontal Boring Mill, 40" x 63"
Table, 55" Cross, 49" Vertical, 49" Longitudal, #50 Taper w/PDB, 11000 Lbs
on Table, Anilam Commando, 1980(table Not Included)
LEBLOND 3" Gun Boring Machine, 14" Swing x 177" Centers, 14" 4-Jaw Chuck,
s/n:2GB-120
HEALD Borematic #48-A
|
|
ROTARY TABLE & ANGLE PLATES
|
GIDDINGS & LEWIS 4' x 5' Manual Rotary Table, T-Slotted, Shot Pin
CINCINNATI GILBERT 36" Dia Manual Rotary Table, 8-7/8" Hi
G.C.C. Super H.D. 32.5" Precision Tilting Rotary Table, 5,000 Lb Capacity,
Mounted on 24" High Stand, Powered, 1 Second Accuracy
31" Diameter Manual Indexing Table
WALTER 24-1/2" Precision Rotary Table, Type R11630G, S/N 2640
IMPERIAL 23.5" Precision Tilting Rotary Table, Powered
HAUSER 19-1/2" Precision Rotary Table
PRATT & WHITNEY 16" Tilting Motorized Rotary Table
WALTER 15-1/2" Precision Tilting Rotary Table
PRATT & WHITNEY 14" Precision Tilting Rotary Table
TROYKE #U-12 12"Horizontal/Vertical Rotary Table
(2) T-Slotted Angle Plates, 62" x90" x 27-1/2"H
|
|
VERTICAL BORING MILLS & VERTICAL TURRET LATHES
|
TOSHIBA TSU-30 Double Column Vertical Boring Mill, 118" Table, 138" Swing,
79" under Rail, 1.25-63 RPM, 67 HP
STIRK 66" Double Column Vertical Boring Mill, Twin Ram Heads
BULLARD 46" Dynatrol Vertical Turret Lathe, 46" Table, 58" Swing, Side
Head, 40" Under Rail, 10-391 RPM, 75 HP, 1969
NILES 40" Vertical Turret Lathe, Turret & Side Heads, 40" under Rail, 200
RPM, 3 Jaw Chuck
BULLARD 36" Vertical Turret Lathe, Spiral Drive, 3-Jaw Chuck, Fine Feeds
|
|
DRILLS
|
DRILLMATION #1207, 1-1/4" x 12" Gun Drill, High Pressure Coolant, 10,000
RPM, 3 HP, 30 IPM, Jig Type
WARD RIDDLE 1-1/2" x 30" Gun Drill, Ball Screw , 15HP, 8000 RPM, H.P. Coolant
EXCELLO #14-810 Gun Drill, Hydraulic Feed
OKUMA #DRA-J 8' x 21" Radial Drill,, #5MT, 18-2240 RPM, Box Table, 7.5HP
CERUTI #TNC-60 5' x 16" Radial Drill, , #5MT, 30-1500 RPM, 10/7.5 HP, 12"
Quill Travel
OERLIKON #UB2 Universal Drill, 1.25" Cap, #3MT, 6"Stroke, Tilt Head, 34" x
27" Base
CHAS D. ALLEN Column Drill, 12" Throat, 26" x 21" Table
LELAND GIFFORD 6-Spindle Gang Drill, 12" x57" Table, 3/8" Chucks,
3520/1730/1150/570 RPM, Coolant Trough
LELAND GIFFORD Horizontal Multi-Spindle Drill, 6 Spindles, 2" Uppers, 5HP
Lima Drive, Feed Mech., 15" Dia. Drill Area
WARNER & SWASEY #11RD 2-Head Tapping/Threading Machine, Leadscrew, Tooling
FOREMOST #75MA Drill Press, #2MT, 5/8" Capacity
CRAFTSMAN ATLAS 17" Drill Press, 1 ph
BURGMASTER #2BHTL N/C Turret Drill, GE Mark Century
|
|
GEAR MACHINES
|
GLEASON #13 Universal Gear Tester
GOULD & EBERHARDT 48" Gear Rack Cutter
(3) SAFAG Type 118 #IIa Auto Wheel & Pinion Cutters
SAFAG Type 118 #Ia Auto Wheel & Pinion Cutter
(2) REISHAUER Tool Grinders
ILLINOIS TOOL WORKS #335 Gear Checker, s/n: 24
MICHIGAN 1125 Gear Tester, s/n: 2352
SUNDERLAND Double Helical Gear Cutters
|
|
REBAR PROCESSING EQUIPMENT
|
PEDDINGHAUS Perfekt 50 Rebar Bender, 2" Dia. Capacity for 64,000 PSI
Tensile, 4 HP Drive, Tooling
MURE MKJ-VR Double Head Rebar Bending Machine, 50' Bend Centers, Hydraulic,
1.57" Dia. Cap, 1982
MURE MKD-VR Double Head Rebar Bending Machine, 10' Bend Centers, Hydraulic,
1" Dia. Cap, 1984
ALAMO MB Rebar Bender, 2" Capacity
TOYO B-52 Rebar Bending Machine, 1"-2" Capacity, 7.5 HP, 1986
MURE MK-3G Rebar Curving Machine, 1.57" Dia. Cap., 1984
(3) CV 22 Horizontal Rebar Bending Machines, Semi-Automatic Reverse,
Mechanical, 20' Work Table
PEDDINGHAUS Simplex 50 Rebar Shear, 2" Dia. Capacity with 64,000 PSI
Tensile, 5 HP Drive
|
|
PRESSES
|
ERIE 750 Ton Hydraulic Bulldozer, 15" Stroke, 42" Daylight, 84" x 24"
Resist Plate, 50 HP, Oil-Gear Pump, 1966
DENSION 650 Ton Hydraulic C-Frame Press, 30" Stroke, 66" Throat, 48" DL,
5'x8' Bed, 36" Square Ram, Vickers Pumping System
DELTA 300 Ton, 4-Post, Down-Acting Press, 120" x 54" Bed, 18" Stroke, 33"
DL, New Posts & Slides, New Oilgear 25HP Pump System
RW WOOD 190-Ton Hydraulic C-Frame Press
BLISS #75-1/2 SSSC 135 Ton Punch Press, 7" Stroke, Back Geared, 23" x 23" Bed
BLISS #28 90-Ton OBI Punch Press
HEATH/HITCO 75 Ton Hydraulic, Upstroking, 4-Post Press, 62" x 17" Distance
Between Posts, 24" Stroke, 45" Daylight, 75" x 32" Bed Area, Hydraulic Die
Clamping, 10 HP Pumping Unit
BLISS #304 Straight Side Punch Press
DANIELS 50 Ton, 4 Post Hydraulic Press, 14.5" x 9.5" Distance Between
Posts, 17.5" x 16.5" Bed/Ram Area, 14" Stroke, 22.7" DL, Ejector Cylinder
in Bed, 7.5 HP
NIAGARA #A3-1/2 45 Ton Punch Press, Air-Assist Key Clutch
ALLIANCE 30 Ton Horn Press
V & O 15 Ton OBI Punch Press
(2) PRESS RITE 10 Ton OBI Punch Presses
PERKINS #300 10 Ton OBI Punch Press
PERKINS #1B Punch Press
(3) PERKINS 5 Ton OBI Punch Presses
(5) ROUSELLE OBI Punch Presses, 1.25" Stroke, 5" SH, 1" Adjust, 200 SPM
ALVA ALLEN 3 Ton Deep Throat Punch Press
DENISON 2 Ton Hydraulic Press, 12 Position Index
CHAMBERSBURG Cecostamp Hammer, 48" x 36" MHL, 3500 Lbs Die Weight, Air
SCHMIDT #5-T Marking Machine, Bellows Air Motor w/2.5" Stroke, 7-Digit Drum
SCHMIDT #99 Marking Machine for Plate up to 3/16" thick, X & Y Control,
Keyboard
BROTHER #12VS Marking Machine, Air Operated
JAS. H. MATTHEWS #222 Pneumatic Marking Press
CAROLINA 50 Ton Shop Press
KR WILSON 30 Ton Horizontal Press, Hydraulic, 60" between Platen & Ram,
6.5" Stroke, Motor/Hand
BENCHMASTER #925 Straightener-Feeder, s/n: 22304
|
|
BRAKES
|
WYSONG 12' x 10 Ga Mechanical Press Brake
DREIS & KRUMP #404-D Mechanical Press Brake, 6' OA, 4'-6" B.H., 6'x1/4" Cap
CINCINNATI #3-6 Mechanical Press Brake, 50 Tons, 8' OA, 6'6" BH, 10 Ga x 6' Cap
DREIS & KRUMP #188 8' x 1/2" Power Apron Brake
DREIS & KRUMP 48" x 16 Ga Finger Brake
DIACRO 24" Hand Brake
ROPER WHITNEY Magnabend #4181 Hand Brake, 49" x 18 Ga, .16" Bend Radius
|
|
SHEARS
|
HTC #500-16A 1/2" x 16' Hydraulic Shear, 40HP, 1975
PEXTO 10' x 10 Ga. Mechanical Squaring Shear
WYSONG 10' x 12 Ga. Mechanical Squaring Shear
WYSONG 8' x 10 Ga. Mech. Squaring Shear
PEXTO 6' x 16 Ga Mechanical Squaring Shear
PEXTO 36" x 18 Ga Hydraulic Shear
SOLAR High Throat Nibbling Shear
LENNOX #TE-250 Tru-Edge Metlmaster Nibbling Shear, 1/4" Cap, 5 HP
ROPER WHITNEY. 100 Hand Notcher, 6" x 6" x 16 Ga
|
|
STEEL FAB EQUIPMENT
|
BERTSCH #8 Initial Pinch Plate Bending Roll, 10' x 3/8", Air Drop End
POPE 5/8" x 7' Pyramid Plate Roll, 20HP Drive
4' x 10 Ga Pyramid Roll
TIBO #FE 1-1/2 Roll Former, 13 Stands on 8-1/2" Centers, 1-1/2" Shafts,11"
Roll Space, 1-1/2" Vertical Adjustment, 20 HP A.C. VS Drive, 1965
PINES #A-3 Aircraft Bender, CCW, 3" x .188" Wall, 7'5" Tube Length, Updated
Digital Dial-A-Bend, Withdraw Mandrel, 1977
ALLIED BOLT Hydraulic Bender
WALLACE 4" Schedule 40 Mech. Pipe Bender
AMADA LUL-1212 Load/Unloader for Vela or Pega Turret
PEDDINGHAUS #205A/20 90 Ton Steel Worker
MUBEA KBL-1-1/2 Mechanical Ironworker, 5 x 5x 1/2"
RYERSON/KLING #4 Mechanical Ironworker, 4" x 4" x 3/8", 60 Tons
ALBERTIA 3" x 3" x 3/8" Mechanical Ironworker, 1-7/16" Rounds, Notcher
MUBEA JR-BF 10 Section Shear, 1-3/16" Rounds, 2 x 2 x 1/4" Angle, Notcher
DIACRO #18 Turret Punch
New THOR #1210AH Turret Punch, 12 Ton Cap.
UNITOOL #H55LCN Notching Punch
PARKER No. 624 Model G Tube Flarer
COIL TOOL & DIE #NHF-9768 Tube End Former
AF NETO 40" x 24 Ga Slitter, 6 Cuts, 5 HP
COOPER WEYMOUTH 12"-14 Ga Press Feeder
LITTEL Double End Uncoiler, 1,000 Lb Capacity
YODER 30-Ton Flying Cut-Off
CLOUGH Custom Power Flanger
IN-X Fastner Corp Bench-Top Dimpler
|
|
SAWS
|
KALTENBACH HDM-1300 Cold Saw, 55" Blade Dia., 19" Rounds, 17" Squares, 31"
x 13" Flats, 16-40 Channel, Mitering, 15/20 HP, Infeed/Outfeed Tables,
1972, Rebuilt
SFT 36" Non-Ferrous Carbide Saw, 30 HP
AMADA HA400 Auto Horizontal Bandsaw, '60's
DO ALL #C-260A Auto Horizontal Bandsaw, 10-1/4" x 12" Cap, 0-24" Index, VS,
1986
COSEN #AH-250C Automatic Horizontal Bandsaw, 10" Rounds, 11" x 7.5"
Rectangle, 2HP Blade Drive, 1980
WELLS Horizontal Bandsaw
DO ALL #C-79 Auto Horizontal Bandsaw
New BIRMINGHAM RF-712R 7" x 12" Horizontal Bandsaw
MARVEL #8 Tilt Head Vertical Bandsaw
(2) JOHNSON Model R Horizontal Bandsaws
POWERMATIC #8 Vertical Bandsaw, 25"Throat, Blade Welder, Varispeed, 3600sfpm
GROB 24" Vertical Bandsaw, Blade Welder
POWERMATIC 87 20" Vertical Bandsaw, Blade Welder
KYSOR JOHNSON V-16 Vertical Bandsaw
WELLS #W-20 Vertical Bandsaw
KASTO #PBS-630 Power Hacksaw, 25" Rounds, 25" x 15" Flats, 8HP
MARVEL #9/M4 Power Hacksaw, 1970, s/n: 97980
(2) MARVEL #9A Power Hacksaws
EVERETT 3HP Cut-off Saw, Single Phase
EVERETT 20" Abrasive Chop Saw
HOLY MACHINERY 8" Chop Saw Mounted on Table
STRYCO MF-1 Bandsaw Blade Welder
|
|
WELDING EQUIPMENT
|
SKIAKY #VX-68x46x68 Electron Beam Welder, (2) STOKES 412H 300CFM Vacuum
Pumps, CVC PMC-20C Diffusion Pump, 60KV/500Ma Electron Beam Gun, H.S.
Chuck, 14" Rotary table
PANDJIRIS 10-Ton Tank Turning Rolls, #PR-30/10 Driver, #IR-10 Idler, Remote
w/Vari-Speed
GENERAL WELDERS Drive Line Welder, (2) HOBART #RC-500 Power Supplies, s/n: 2447
NEWCOR 200KVA Seam Welder, 36" Throat, Programmable Controls, 1990
TAYLOR WINFIELD 70 KVA Spot Welder, 18" Throat
TAYLOR WINFIELD 75 KVA Spot Welder, 18" Throat
4-Torch British Oxygen Burning Machine, Electric Eye
4-Torch Burning Machine, 4' Wide x 9' Long Capacity
HEATH #RC-46F Pattern Cutting Attachment, Roller Base, Single Gas Torch
LINDE SVI-400 Power Supply
MILLER #340A/BP TIG Welder
COBRAMATIC SV1000 Wire Feed Unit
OAKLEY #BW76 Fusion Bench Welder
(2) PLASMATRON 3500 Plasma Spray Control Units
|
|
MISCELLANEOUS
|
SHAW BOX 40/5 Ton Bridge Crane, 44' Span, DC, Cab
NORTHERN 10 ton x 50' Span Top Riding Bridge Crane
DEMAG 3 Ton 37' Span Top-Riding Bridge Crane, Underslung Hoist, 2 Speed,
New 1991
DEL MAR Engineering 150,000 LB Hydra-Set #FG Crane Scale
QUINCY #740-B 200 HP Rotary-Screw Air Compressor
GILBARCO 7-1/2HP 2-Stage Compressor, Receiver, Vertical
(3) 3' x 2' x 4' Stainless Steel Tanks & 1 Ea 3' x 2' x 4' Polypropylene
Tank with"Heaters/Controls/Agitators for Pickling
DESPATCH Aluminum Aging Oven, 36" x 12" x 120" Long, Controls
DESPATCH 500 Deg. F Oven, 36" x 36" x 24"D,
Burn-Off Oven, Model 4999
DEVILBISS-TRALLFA #TR3000S Painting Robot, Venus H.I.S.80 Fiberglass
Chopper Gun, New 1980
(2) METEOR #307 Coil Winding Lathes
OSTER #582A Pipe Threader
Custom Threader, 1-1/4" & 2-1/2" Capacity
RIDGID #400A Pipe Threader
LANDIS Threader
GISHOLT #6-U Dynetric Balancer, 100-2000 LB Capacity, 60"Swing x 92"CC, 15HP
GISHOLT #4-U Dynetric Balancer, 125-1250 lbs, capacity, 48" Swing x 60"CC,
5 HP
SNOW #DR-2 Tapping Machine, Master Fixture #18, #2 Tap Head, No.6 - 3/8"
Cap., s/n: 35205
K & K Versatap 12 Vertical Tapping Machine, Rockwell #15-665 Head,
Procunier #2EJ Tapping Head, 32" x 19" Travels, 30" x 18" Table, 3/4 HP
Mechanical Keyseater, 12" Stroke
AMERICAN 32" Shaper, Tilt Head, Plain Table
DEVLIEG Measuring Machine
MOORE #3 Measuring Machine
JONES & LAMSON Epic 50 Optical Comparator, 50" Screen, Digital Readout,
20X, 50X Lenses
HOLLYMATIC #8/65 Multiflow Meat Patty Machine, s/n: 345
(2) SWECO #US48 Vibro Endergy Separators, 48" Dia. , Stainless Steel, Foood
Grade, Single Deck, Covers
SWECO #S24S44 Vibro Energy Separator, 24" Dia., Stainless Steel
VAPOR BLAST #1818 Liquid Hone, s/n: 2936
OILGEAR #DKVR-3511-VNL Hydraulic Pump, 79.6 GPM, 1100 PSI
OILGEAR #DH-3525 Hydraulic Pump, 2500 PSI, 860 RPM, 35HP, s/n: 94484
(3) Air Cushions, (2) 5 Ton, (1) 20 Ton
ENERPAC 10,000 PSI Power Pack
(4) E.A. BAUMBACH Punch Press Die Sets
ENERPAC JTA-356 35 Ton Jack, s/n: 008
TEKTRONIX #465B Oscilloscope
WESTINGHOUSE 60 KW MG Set, 120 Volt/500 Amp
Huge Selection of Machinery & Equipment Including DUPLOMATIC, TRUE TRACE
Tracer Attachments, Taper Attachments, Electromagnetic Chucks, BRIDGEPORT,
CINCINNATI , KEARNEY & TRECKER, GIDDINGS & LEWIS Attachments, Dies,
Punches, Tank Turning Rolls, Vacuum Pum
ps, Power Packs, Hydraulics, Motors, Machine Tooling, Parts, Accessories
and Too Much More To List!
|
|
MATERIAL HANDLING & ROLLING STOCK
|
(2) 12' x 30" Scissor Lifts, 4000 Lb Capacity
6' x 30" Scissor Lift, 2000 lb Capacity
10 Ton Floor Jack
Electric Pallet Jack
DELCO Steam Cleaning System, Portable, Diesel Fired
VIDMAR 12' High Die Stack Unit, 1000 Lb Swiveling Load/Unload Unit
20' Dry Ocean Container
FABTEK 1000 Lb LPG Manlift, 8' x 8' Platform,
5th Wheel Yard Tractor
GERLINGER 22,000 Lb LPG Forklift, Overhead Crane Attachment, Rotation for
Forks, S/N: 4860
CLARK 18,000 Lb LPG Forklift
1979 GMC Flatbed
1979 FORD 1/2 Ton Pickup
|
|
FOR SALE BY PRIVATE TREATY
|
BOLDRINI SIJ 10' x 2-1/2" Initial Pinch Bending Rolls, Up to 10'x 4-1/4" on
44" ID, Hot 29" Top Roll, 275 HP Drive
S.I.G. "PFN" Form Fill /Seal Packaging Line, ISHIDA Weigher, 100-120 BPM, 1983
WINDMOELLER & HOLESCHER #814 3-lane Bag Machine, Polyquick BN, Bottom
Welded Bages, w/ or w/o Lateral Gussets
WINDMOELLER & HOLESCHER #3700 6-lane Bag Machine, Polyquick BN, Bottom
Welded, w or w/o Lateral Gussets
Call Steve Krom at 206-244-3262
|
|
TERMS & CONDITIONS
|
PAYMENT: Full payment must be made by no later than 4pm, Friday, March 27
A 25% deposit is required by close of business, auction day.
Cash, cashiers check, Master & Visa Cards only.
Personal or Company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: Removal schedule to be announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence
over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on
a separate and/or aggregate basis.
Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
From north or southbound I-5, take the Orillia Road/South 188th
exit(#152). Drive east on 188th which turns into Orillia Road just east
of the freeway. Follow Orillia Road south down the hill where it turns
into eastbound South 212th. Continue east on
212th to 68th Avenue South(approximately 2.8 miles from I-5). Turn left and
drive north on 68th approximately 1/2 block to the auction site, located on
the right.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
|
AIRLINES/RENTAL CARS
|
SeaTac Airport is served by all major airlines and rental car agencies and
is located approximately 5 miles west of the auction site
|
|
LODGING
|
Hawthorn Suites Hotel 253-395-3800
Seattle Airport Hilton 1-800-445-8667
Doubletree Inns 1-800-222-8733
Courtyard by Marriott 1-800-321-2211
|
|
PROPERTY FOR LEASE
|
Property is available for lease
Freestanding building
53,000 sf total
8000 sf office space
Crane served - 25' under hook
(2) 15 ton, (1)22 ton
30' clear height
Heavy power
Outside yard
FOR MORE INFORMATION CALL CB COMMERCIAL
GARY VOLCHOK: 206-292-6130 OR MILT REIMERS: 206-394-3374
|
|
Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions
Registration Form | Advanced Bid Overview | Terms & Conditions
 Back to Top
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©1997-2005 James G. Murphy Co.
All rights reserved worldwide
|
|
|
