Click small pics to enlarge

Click HERE for more photos




EEL RIVER LUMBER PRODUCTS

WEDNESDAY & THURSDAY - SEPTEMBER 20 & 21 - 9AM Each day
Preview 10am to 4pm, Tuesday, September 19, or by appointment
Hwy 101, Fortuna, CA

Past Auction held in 2006

Display Catalogs: Day 1 | X Lots | Day 2

PDF Catalogs: Day 1 | Day 2

Advance Bid Center

AUCTIONEERS NOTE Due to an ownership dispute, the following items will not be included in the auction:
  • (1)10,000 gallon 1/2 vaulted tank
  • (1) 1,000 gallon vaulted tank
  • (1) 550 gallon vaulted tank
  • (1) 275 gallon oval tank
  • (8) 220 gallon oval tanks

Debarkers - DAY 1
  • 1993 NICHOLSON A5 35" right hand 6-arm high speed ring debarker, air ring, 4" minimum diameter, 8' minimum length, 130-230 fpm, 163 rpm ring speed, ring pull out, air operated lube system, feed roll pressure, BALDOR 125 hp/1150 rpm/500 volt DC ring drive, BALDOR Super E 50 hp/1780 rpm, (2) 40 hp/1780 rpm feed drives, (3) ALLEN BRADLEY 1395 digital drives on ring, in and outfeed log hauls, ALLEN BRADLEY PLC 5/20, IMC-S class remote, cab, controls, hydraulic unit, cameras, monitors, (2) 42' H110 log hauls w/4 & 5-arm kickers, DC motors, FALK square box reducers, spares, s/n: 243-6333
  • 1975 SALEM MKII 72" 5-arm ring debarker, air hold downs, alligator chains, BALDOR 200 hp/1150 rpm/500 volt DC drive, ALLEN BRADLEY 1395 AC digital ring drive, ALLEN BRADLEY 1397 AC digital infeed drive, MATRA 220 kva 460-460Y/266 volt transformer, 40' 2-strand H132 infeed log haul w/motor, FALK reducer, 62' 2-strand H132 outfeed, log sweep, motor, FALK reducer, 10 hp hydraulic unit, oiler, cab, controls, cameras, monitors, spares, s/n: 38200

Whole Log Cut Off Saws - DAY 1
  • L&M style 72" insert tooth circular whole log swing type cut off saw, TOSHIBA 75 hp/890 rpm motor, 7-1/2 hp hydraulic unit, 40' H110 infeed log haul, BALDOR 40 hp/1750-2150 rpm DC drive, REX 55 rpm reducer, 40' 3-strand H124 outfeed log haul, 6-arm hydraulic log sweep, BALDOR 40 hp/1750-2150 rpm DC drive, REX 55 rpm reducer, spare parts, saws
  • L&M style 84" bar type chain whole log cut off saw, 30 hp, spare bars, parts, chains
  • 72" insert tooth swing arm whole log cut off saw, TOSHIBA 75 hp/890 rpm, (LOCATED AT REDCREST, SOLD BY PHOTO, DAY 2)

Bandmills - DAY 1
  • SALEM linear positioned 5' vertical quad band end dogging resaw, TOSHIBA 110 hp/1750 rpm, mechanical strain, 30' pre-positioning rolls, 30 hp hydraulic carriage drive, 1994 CM&E 92 linear positioned pre-slabber w/key knife conversion, TOSHIBA 200 hp/1188 rpm, 28" cut, 825 rpm, 125-200 rpm, CM&E U-FLO oiler, hydraulic slat bed chains, feed thru rolls, 30' outfeed rollcase w/(9) 8-1/2"x60" rolls, 8' 6-strand H78 cross over transfer, SKK gearhead motor, (2) SAF S36-36D 350 hp DC drives, IESCO frictionless bandmill brake, INOVEC 60 hp, FAC 85 hp hydraulic units, (6) lasers, cab, controls, spare saws, knives, parts
  • 1990 SALEM 8' left hand double column vertical headrig bandmill, mechanical strain, slatbed chain, 1-3/4" top wheel, BALDOR 400 hp/1000 rpm/500 volt, SAFTRONICS/IES KDC12-1250-4, 450 hp/0-500 volt solid state drive, FPT 550 kva, 480-480Y/277 isolation transformer, cab, controls, spare saws, parts
  • SALEM 6' vertical band resaw, NEWMAN 150 hp/1185 rpm, mechanical strain, 10' TEMPOSONIC positioned line bar, ALLEN BRADLEY 5/20 PLC w/IMC S class remote, PANELVIEW 900 screen, 30' powered infeed rollcase, (12) 8-1/2"x30" rolls, 10' outfeed rollcase, (5) 6-1/2"x28" rolls, spare saws, parts

Carriage-Drive-Scanner-Slabber - DAY 1
  • 1990 SALEM 32'x60" left hand TEMPOSONIC positioned carriage, 4-knee, 8-truck, BROWNSVILLE turner, scissor, hammer, board dogs, cant kicker, pantograph, INOVEC 60 hp hydraulic unit, hydraulic cable tensioner, rails, bumper, spares, s/n: 14509290
  • GE 440 hp/1000-2000 rpm/500 volts, FALK M2399 reducer carriage drive, cable drum, cable, with SAFTRONICS/IES KDC12-1250-4, 450 hp/0-500 volts, solid state drive, MATRA 600 kva, 480-480Y/277 volts isolation transformer, s/n: 8-967004
  • 1990 INOVEC YIELDMASTER log scanner, (48) eyes, curtain, controls, cab, s/n: 841A-895-JCONT
  • CM&E 64 left hand TEMPOSONIC slabber, 8-knife w/key knife conversion, approximately 300 hp GE DC motor, SAF DC12-500-4, 300 hp/500 volt DC drive, MATRA 400 kva, 480-480Y/277 isolation transformer, spare knives, parts

Edgers-Scanner - DAY 1
  • 1994 SCHURMAN 12DAG42, 12"x42" splined arbor double arbor gang edger, (3) TOSHIBA 350 hp/1785 rpm top and bottom arbor motors, 4"-12" thickness, 4"-30" width, 8'-24' maximum capacities, 110-165 fpm, 34" saws, 1994 CM&E 92 linear positioned pre-slabbers, key knife conversion, TOSHIBA 200 hp/1188 rpm, 24' infeed, 24' linear positioned fence, USNR scanning, knurled rolls, crowding rolls, cant turners, pin stops, 48"x10' outfeed belt, (6) lasers, cab, controls, hydraulic unit, (4) SAF S36-36D 350 hp DC drives, ALLEN BRADLEY 1336 adjustable frequency AC drive w/ALLEN BRADLEY KB050 dynamic brake, spare saws, parts, s/n: 2955
  • 1993 SCHURMAN 4TA36, 4"x36" splined top arbor 4-saw shifting board edger, TOSHIBA 350 hp/1780 rpm, DC feed drive to reducer, 1994 APPLIED THEORY S-SCAN FRM120DES 24' scanner, APPLIED THEORY maximizer system, cabinet, computer, printer, remote PLC's, (10) G26L70 lasers, 24' infeed, 24' linear positioned fence, 19' 3-section infeed transfer, (4) positioning pins, (12) board hooks, 5' lug loader/scanner infeed w/even end rolls, 6-arm tipple, 9' 8-strand hydraulic driven unscrambler, 42"x19' outfeed belt, lube system, 85 hp hydraulic unit, SAFTRONICS S36-36D 350 hp DC drive, controls, spare saws, parts, spare lasers, s/n's: 30400, 2947
  • SCHURMAN 10"x60" splined double arbor gang edger, 300, 200 hp bottom arbor drives, 150 hp top arbor, 26' split roll infeed rollcase, 60"x28' outfeed belt, (4) lasers, (2) SAFTRONICS S36-36D 350 hp DC drives
  • FILER & STOWELL 8"x72" splined arbor board edger, 4-saw setworks, BROOKS 250 hp/1750 rpm, BALDOR 25 hp/1750-2150 rpm DC feed drive, 24' infeed rollcase, ASEA size 6 reduced voltage starter, IES 25 hp/500 volt DC drive

Hogs-Chippers - DAYS 1 & 2
  • 1996 KIMWOOD 48 series 48"x72" right hand performance knife hog, (2) BALDOR 250 hp/1200 rpm, designed for redwood, 60-120 tons per hour, 693 rpm rotor speed, hydraulic hood, ALLEN BRADLEY 1336 digital DC drive, ASEA, GE size 6 reduced voltage starters, spare knives, parts, 60"x42' chevron infeed belt w/5' fiberglass tub, RENS LS345 metal detector, s/n: 60077
  • LAMB 42"x36" Maxi Knife hog, TOSHIBA 300 hp/1185 rpm, breaker, top and bottom feed rolls, GE size 5 reduced voltage starter, spare knives, parts, 8' 10-strand H78 infeed conveyor, 30"x21' infeed belt, 6' fiberglass tub, RENS C220 metal detector, (3) motors, FALK square box reducers, s/n: 780711-1
  • BLACK CLAWSON 66" right hand 8-knife chipper, key knife conversion, FAIRBANKS MORSE 300 hp/705 rpm, ASEA size 6 reduced voltage starter, horizontal feed, bottom discharge, spare knives, parts, SYNCROCOIL 24"x25' vibratory conveyor with 5' fiberglass tub, 3' fines dropout, s/n: 4185-77
  • BLACK CLAWSON 53" right hand 8-knife chipper, key knife conversion, GE 200 hp/1185 rpm, ASEA size 5 reduced voltage starter, spare knives parts, 12"x60" infeed belt w/6' fiberglass tub, MDI CCW65A metal detector, s/n: 2786-64
  • CM&E NORMAN 48" right hand 6-knife chipper, key knife conversion, GE 150 hp/885 rpm, GE size 5 reduced voltage starter, 15"x18' infeed belt w/6' fiberglass tub, RENS C220 metal detector

Chip Screens-Bins-Cyclones-Blowpipe-Blowers - DAYS 1 & 2
  • 1992 NICHOLSON 8'x12' 2-deck full flow chip screen, s/n: 710-6267
  • ACROWOOD 812 8'x12' 2-deck chip screen, s/n: 4766-89
  • ELJAY 5'x8' 2-deck chip screen, BALDOR 5 hp/1160 rpm
  • PEERLESS approximately 30-unit hydraulic chip bin, 15 hp
  • (2) PEERLESS approximately 24-unit air operated chip bins
  • PEERLESS approximately 20-unit hydraulic chip bin, 15 hp
  • PEERLESS approximately 14-unit hydraulic chip bin, 15 hp
  • PEERLESS approximately 14-unit air operated chip bin
  • Approximately 100-unit end dump chip bin w/4-strand chain transfer
  • 10', 6', 4' diameter cyclones
  • Large quantity of spiral and low pressure blowpipe, blowers

Trimmers-Grade Readers-Grade Printer - DAYS 1 & 2
  • 1994 IRVINGTON MOORE 6671 32' cut, 36' pass individually motorized right hand trimmer, (17) 22" air lift saws, 10 hp saws, zero saw, triple auto fence, 1"-4" thick, 3"-24" wide, 6'-32' long capacities, 36' 3-section lugged feed thru chain, even end rolls, chain, board hooks, carryovers, 11' 8-strand lumber landing table, 35' 9-strand grading transfer, 27' 9-strand lumber transfer, 10 hp, (2) 7-1/2 hp EMS frequency drives, grading lights, spare saws, parts, s/n: 2148RH
  • IRVINGTON MOORE 43A 20' cut, 24' pass left hand line shaft trimmer, (11) 22" air lift saws, 1', zero saws, 1"-4" thick, 3"-24" width, 8'-20' length capacities, 40 hp/1770 rpm line shaft motor, 15' 10-strand lugged feed thru transfer, GE 15 hp/1750-2150 rpm DC, 25' 3-section 6, 8-strand infeed transfers, 8' 8-strand unscrambler, IES 15 hp DC feed drive, ALLEN BRADLEY 5/04 CPU, spare saws, parts
  • PRESCOTT 32" cut, 36' pass line shaft right hand trimmer, (17) 30" air lift saws, zero saw, 60 hp/1170 rpm line shaft motor, 8' 13-strand lugged feed thru transfer, 30' outfeed rollcase, (12) 8-1/2"x48" rolls, drive, reducer, ALLEN BRADLEY 1336 KB010 dynamic brake, spare saws, parts
  • IRVINGTON MOORE 8' precision end trimmer w/1' saw, (3) 20" approximately 5 hp saws, 9' 2-strand lugged feed thru chain, gearhead motor, 4' 2-arm mechanical tilt hoist, 13' 3-strand H78 infeed transfer, motor, FALK square box reducer, 14' 2-strand H138 infeed transfer, even end rolls, chain, (2) gearhead motors, 10"-15' outfeed belt, EURODRIVE gearhead motor, 29' 2-strand H138 outfeed transfer, HITACHI gearhead motor, 10"x24' clean out belt, motor, FALK square box reducer
  • (2) ARTEC CHROMALINE automatic grade mark readers
  • IRVINGTON MOORE 3240 automatic face grade printer

Compressors-Drivers-Air Receivers - DAYS 1 & 2
  • 1997 GARDNER DENVER SAV-400 ELECTRA SAVER rotary screw compressor, 400 hp, AUTO SENTRY ES controls, approximately 2000 scfm @ 110 psig, water cooled, 31604 hrs, GE 8000 2-section motor control center w/(8) switches, s/n: U90541
  • 1994 Quincy Northwest 241B rotary screw compressor, 33720 hrs, s/n: 940689
  • 1993 Quincy Northwest 245B rotary screw compressor, 20271 hrs, s/n: 930385
  • 1978 Quincy Northwest 740A rotary screw compressor, 42677 hrs, s/n: 780212
  • GARDNER DENVER 700031 air cooled refrigerated air dryer, 2000 scfm, 10 hp, R22 refrigerant
  • GARDNER DENVER 7000107 air cooled refrigerated air dryer, 1000 scfm
  • GARDNER DENVER 7000101 air cooled refrigerated air dryer, 800 scfm
  • Assortment of tank mounted compressors to 15 hp, 3'x8' air receivers

Planers-Pineapple Feed Tables-Breakdown & Tilt Hoists - DAY 2
  • 1986 COASTAL 8"x25" 20-knife, 4-head planer, 200 hp top, 100 hp bottom, 75, 50 hp side heads, top and side chip breakers, motorized feed roll lifts, high speed hydraulic tensioning, top and side head opening systems w/auto reset, digital read out positioning, (2) hydraulic in place top and side head jointers, hydraulic high speed bottom head in and out, water and air cooling system, 34' hydraulic double pineapple feed table, speed up roll, hydraulic height control, (4) spiral, (4) smooth 12-1/2"x40", (3) 12-1/2"x30" smooth powered rolls, 22' hydraulic live bridge, (9) 12-1/2"x30" canted rolls, (2) 30"x13' outfeed belts, 5'x11' slow down belt, BALDOR adjustable frequency drive, PFS 240 hp hydraulic unit, in line spray tunnel w/pumps, spare 16, 20-knife heads, profile yokes, parts, s/n: HDFT-041-86
  • STETSON ROSS 8"x15" 14-knife, 6-head planer, 100 hp top, 50 hp bottom & side, 35 hp profile heads, GENCO 75 hp feed rolls drive, GENCO 30, 25 hp MG sets, 32' double pineapple feed table, speed up roll, 25 hp DC drive, (3) spiral, (7) smooth 8-1/2"x30" rolls, 4' bridge, 40 hp hydraulic unit, 18"x22' outfeed belt, 4'x5' hydraulic driven slow down belt, spare 10, 12, 14-knife heads, profile yokes, parts
  • 32' 11-arm x 64" hydraulic tilt hoist, WF 60 hp hydraulic unit, 24' 7-strand infeed transfer, SM CYCLO 25 hp/35 rpm gearhead motor (to COASTAL)
  • 23' 7-arm 60" hydraulic tilt hoist, 40 hp hydraulic unit, 24', 45' rollcases, (18) 8-1/2"x10" rolls, 17' 6-strand infeed transfer, motor, EURODRIVE reducer (to STETSON ROSS)
  • 14' 4-arm mechanical tilt hoist, 52" arms, no drive (LOCATED AT REDCREST, SOLD BY PICTURE DAY 2)

Sorter - DAY 2
  • 1994 IRVINGTON MOORE 24' 17-bin pusher lug sorter, 26' pass, 1"-4" thickness, 3"-24" width, 8'-24' length capacity, 70 lpm, USNR lumber storage program, PLC, computers, printer, 6' 12-arm tipple, 27' 16-strand lugged transfer, 14', 7' even end rolls, 12' 3-section 5 and 8-strand lugged transfers, 5-arm tipple, approximately 80' 5-arm lugged feed thru transfer, (2) 38' 6-strand take away transfers, motors, SM CYCLO reducers, 41' 5-strand 4" roll top green chain, 20', 32' outfeed rollcases, 8-1/2"x60" rolls, motors, SM CYCLO reducers, BALDOR 60 hp/1750-2350 rpm DC, FALK 60 hp square box reducer (main feed drive), SAFTRONICS DC6-251-4 solid state DC drive, FPT 75 kva, 460-460Y/266 volt transformer, PMR 15 hp hydraulic unit

Stacker - DAY 2
  • 1994 LUNDEN 24' lumber stacker w/auto sticker placer, 52"x52" package, 15' 6-strand infeed transfer, motor, SM CYCLO reducer, 17' 10-strand unscrambler, hydraulic drive, 9' 7-strand transfer, 36" even end rolls, motor, FALK square box, SM CYCLO gearhead motors, 14' 7-strand stacker transfer, (11) fork arms, motor, reducer, SM CYLCO gearhead motor, 6-arm lowering hoist, 43', 47'x36" clean out and sticker belts, motors, SM CYCLO reducers, 25', 37', 40' outfeed rollcases, motors, SM CYCLO reducers, 50 hp hydraulic unit, (2) ALLEN BRADLEY 1336 AC frequency drives, ALLEN BRADLEY SLC 5/04 cpu, ALLEN BRADLEY KB010 dynamic brake, WESTINGHOUSE advantage 5-section motor control center w/(20) switches, s/n: 41200

Packaging Line-Bump Station-Stickers & Racks-Lumber Rollouts - DAY 2
  • 1991 SIGNODE M220JRS strapping machine, top and side squeeze lumber bump gates, 3/4" x .020 dual spool feed, MB seals, 24', 27', 36', 39' in and outfeed rollcases, 12-1/2"x54" rolls, hydraulic drives, 28', 34' 5-strand re-entry and outfeed transfers, motors, SM CYCLO reducers, FAC 150, REULAND 25 hp hydraulic units, QUINCY 10 hp compressor, GRACO pump, sprayer, GE 8000 line 3-section 12-switch, CUTLER HAMMER 1-section 10-switch motor control centers, ALLEN BRADLEY 1771 AC output module, s/n: 34467
  • 36' lumber bump station w/(15) 8-1/2"x52" rolls, TOSHIBA 10 hp/1170 rpm
  • (56) 5'x28' lumber rollouts w/(13) 4"x52" rolls
  • (20,000+/-) 5/8"x1-1/2"x52" stickers
  • (50+/-) sticker racks

Boiler
  • 1987 FEDERAL BOILER CO FLR 6071 wood fired water tube type boiler, 15 lb steam, 19917 MBH gross, 15463 MBH net, 64432 sq ft steam, 3307 sq ft heating surface, controls, tanks, pumps, s/n: 68-0063

Filing & Grinding Rooms - DAYS 1 & 2
  • 1997 SIMONDS Optimatic RM0940 band saw leveler, s/n: 97-942-318
  • WRIGHT 1904 quad head side grinder, s/n: 19330
  • WRIGHT 1600 auto trip welder, band or circular, s/n: G9321
  • (2) WRIGHT 150HD-B auto top and facers, s/n's: 618, 609
  • WRIGHT W350 auto dual super HD side grinder, s/n: 334
  • ARMSTRONG #4 right hand bandsaw sharpener w/BALDOR frequency drive, s/n: 12603
  • (2) ARMSTRONG #4 left hand bandsaw sharpeners w/BALDOR frequency drives, s/n's: 12207, 11208
  • ARMSTRONG #6 right hand bandsaw sharpener w/BALDOR frequency drive, s/n: 9608
  • ARMSTRONG 3-10 stretcher roll, s/n: 8035
  • (2) ARMSTRONG #4 stretcher rolls w/welder, anvils, bench, s/n's: 16571, 12807
  • ARMSTRONG #5 stretcher roll w/welder, anvils, bench, s/n: 10336
  • (2) USNR/SCHURMAN 96, 92 dual head saw guide resurfacers
  • HOE H2B dual head resurfacers
  • HOE 76CGK travel bed knife grinder, s/n: 1525
  • NIELSON F520 tipper, s/n: 73J76
  • NEWMAN tub grinder
  • NIELSON 800 cutter head grinder w/914 set up stand
  • STETSON ROSS No. 375 profile grinder
  • (3) ACME 54 circle saw sharpeners
  • 40", (2) 60" BARNHARDT grinder frames w/3 hp head, No. 63 remote, No. 51 head
  • (2) 72" insert tooth cut off saws
  • spare 60" bandwheel
  • bandsaw shear
  • key knife rehoner, knives
  • HOE guide presses
  • (2) babbit pots, babbit jigs
  • guide grinders
  • (4) NEW PACIFIC HOE 47' 6"x14"x13 ga, 30'x9"x16 ga bandsaws
  • (10+) headrig, (20+) resaw bandsaw blades
  • (2) 1 ton, (6) 1/2 ton, 1/4 ton COFFING hoists
  • DAYTON 1/2 ton, BUDGIT 1 ton electric chain hoists
  • (6) ARMSTRONG air swages
  • (4) hand shapers
  • much more

Electrical - DAYS 1 & 2
  • WESTINGHOUSE 2500 kva pad mount transformer, 12470 to 480Y/277 volts, s/n: PATG316-0101
  • 1994 GE 1500 kva pad mount transformer, 12470 to 480Y/277 volts, s/n: Q247074-TVJ
  • GE 1500 kva pad mount transformer, 480Y/277 volts
  • TR ELECTIC 1500 kva pad mount transformer, 12470 to 480Y/277 volts, s/n: 18032
  • MCM 1000 kva pad mount transformer, 12470 to 480Y/277 volts, s/n: 875116-2
  • SQUARE D 4000 amp 2-section switchboard
  • GE SPECTRA Series 2000 amp 2-section switchboard w/(2) 800, (5) 400, (2) 100 amp adjustable trip breakers
  • GE AV line 2000 amp switchboard w/1200, 800 amp adjustable trip breakers
  • (2) IES 2000 amp switchboards w/1000, 600 amp adjustable trip breakers
  • SQUARE D 2000 amp switchboard w/800, (2) 600 amp adjustable trip breakers
  • SQUARE D 2000 amp switchboard w/WESTINGHOUSE IO data recorder
  • ITE 12470 volt/600 amp disconnect, type HFLCHV
  • S&C 13.8 kva 4000 amp switchgear
  • (70+) sections GE 8000 line w/(315+) switches
  • WESTINGHOUSE ADVANTAGE 5-section motor control center w/(20) switches
  • CUTLER HAMMER 600 hp reduced voltage starter
  • ALLEN BRADLEY 200 hp soft start
  • 100 hp/500 volt DC sorter drive system
  • (4) ALLEN BRADLEY 10 hp inverters
  • Selection of transformers to 600 kva
  • starters to size 6
  • breakers to 1200 amps
  • motors to 1250 hp
  • (100+) spare motors, reducers
  • numerous ALLEN BRADLEY PLC, CPU's
  • SAFTRONICS solid state starters to 450 hp
  • cameras
  • monitors
  • lighting
  • test equipment
  • LASER SYSTEMS leveling laser
  • GREENLEE electrical equipment
  • wire and conduit throughout mill site
  • BEST UPS system
  • ALLEN BRADLEY PLC racks w/programmer
  • ALLEN BRADLEY spare bucket, starters
  • (20+) lasers
  • much more

Machine & Truck Shops-Fuel Tank - DAYS 1 & 2
  • 10,000, 550 gallon double wall fuel tanks w/(4) BENNETT pumps
  • 1000+/- gallon waste oil tank
  • (2) 220, (2) 110 gallon oil tanks w/pumps
  • WATER CYCLE Agor waste water recovery system
  • high capacity oil filter crusher
  • 5 ton trailer loader
  • GLOBE 32"x48" 4000 lb scissor lift
  • SWEED 505B scrap chopper
  • 29" lumber swede
  • single head pattern burner
  • (2) JET HBS-9 horizontal bandsaws
  • 48" 5 hp hydraulic arbor press
  • SOLBERGA SE1425 drill press
  • BROWN & SHARPE #2 universal mill
  • PRATT & WHITNEY B 16"x36" lathe
  • (5) MILLER GOLDSTAR 400 SS DC welders
  • (2) MILLER MP45E DC welders wMILLERMATIC 30A wire feeders
  • MILLER SRH333 DC welder
  • AIRCO 400 amp bumble bee DC welder
  • oxy-acetylene sets, hose, gauges
  • straight line torch w/12' track
  • RIDGID 700 portable threader
  • (2) RIDGID 300 pipe threaders
  • GREENLEE 1989 dieless crimper
  • GREENLEE conduit benders, wire pulling reels, lops
  • CLIMAX key mill
  • (2) MILWAUKEE mag drills
  • MILWAUKEE portable bandsaw
  • chain saws
  • weed eaters
  • CAT hose crimper, chop saw
  • AEROQUIP crimper and threader
  • SNAP ON 6' torque wrench
  • SNAP ON YA39 350 lb torque multiplier
  • BUSCH & MILWAUKEE rotary hammers
  • OTC 2 stage hydraulic pump w/double ram cylinder
  • CAT porta power
  • banding tools, banding, crimps
  • chain hoists
  • gas portable pumps
  • parts washers
  • double end grinders
  • tooling
  • hand tools
  • paint pumps
  • steel stock
  • decorative 7' spoked bandmill wheel
  • yard lights
  • wheel pullers
  • radios
  • bearings
  • chain sprockets
  • pulleys
  • cylinders
  • couplers
  • shafts
  • belts
  • pipe
  • conduit
  • air valves
  • safety supplies
  • shop vacs
  • ladders
  • LINCOLN battery powered grease gun
  • (2) TEA 48" vibratory separators
  • DAN FOSS booster pumps
  • breakdown hoist gears w/brakes
  • belting repair kits
  • stainless steel brew tank
  • MAP gas system
  • too much more to list!

Buildings - DAYS 1& 2
  • SOUTHERN PACIFIC wood caboose w/4-person observation tower, front and rear steps, flush toilet, air, diesel tanks, MCB 5x9 axles, 30'-38' overall
  • 185'L x 165'W x 30-40'H all steel clear span building w/50'L x 32'W x 30'H addition, full walls except doorways
  • 205'L x 45'W x 30'-34'H all steel clear span trimmer/sorter building, 3/4 walls except doorways
  • 135'L x 13'W x 20'-23'H all steel clear span building with 20'L x 18'W x 20'H addition, one full wall
  • 64'L x 41'W x 20'H all steel clear span building (no walls)

Log Decks-Transfers-Conveyors-Rollcases-Vibratory Conveyors - DAYS 1 & 2
  • (5) log decks to 42'
  • (40+) transfers to 45'
  • (10+) rollcases to 46'
  • (30+) chain and belt conveyors to 128'
  • (10+) vibratory conveyors to 61'

Office Equipment & Furniture - DAYS 1 & 2
  • 2004 DELL POWER EDGE 4600 XEON server, dual 2.6G processors, 512K, 73GB hard drive
  • 2004 DELL INSPIRON 8200 laptop computer, 2.4G processors, 512K (no hard drive)
  • (5) 2004 DELL PENTIUM 4 desktop computers
  • (8) 2004 DELL 1800 FP ULTRASHARP 18" flat screen monitors
  • GATEWAY 2000 VX700A 16" color monitor
  • GATEWAY 2000 VIVITRON 15" color monitor
  • IBM 400A server
  • WATCHGUARD firebox
  • CISCO series router
  • DELL power connect 5224
  • APC smart UPS 1500
  • IBM 4234 DOT band printer
  • MURATEC MFX-2830 scanner/copier/fax
  • HP LaserJet 3330 scanner/copier/fax
  • (2) H-P SCAN 8250 scanners
  • (2) H-P LaserJet 2300 printers
  • (2) H-P business InkJet 1100 printers
  • EPSON Stylus C66 Dura Brite printer
  • H-P DeskJet 895cxi printer
  • H-P 600 OfficeJet printer
  • HP fax 1010 fax/copier
  • KONICA 9820 fax
  • SHARP UX1100 fax
  • DESTROY IT 4000 paper shredder
  • SAMSUNG Prostar DCS w/STARMAIL voice processing system
  • (10) SAMSUNG LCD 24B keyset DCS phones
  • (20+) desks
  • (50+) chairs
  • (10) fireproof files
  • (20+) legal and letter files
  • 8' conference table
  • hutches
  • bookcases
  • side & folding tables
  • radios
  • office partitions
  • large quantity of mill located office equipment, furniture

Rolling Stock - DAY 1
  • 1998 CAT 980G Logger Series rubber tire log loader, CAT 3406 diesel, MEDFORD log forks, 29.5x25 tires, 10720 hrs, s/n: 2KR01962
  • (2) 1996 CAT 966F Series II rubber tire log loaders, CAT 3306 diesel, MEDFORD log forks, 11350, 13250 hrs, s/n's: 2SL01814, 2SL01765
  • 1987 CAT V200B 20,000 lb dual pneumatic forklift, CAT 3208 diesel, 218" 2-stage mast, MARTIN DECKER 20,000 lb scales, side shift, 54" lumber forks, 25077 hrs, s/n:70Y00794
  • 1986 CAT V200B 20,000 lb dual pneumatic forklift, CAT 3208 diesel, 218" 2-stage mast, MARTIN DECKER 20,000 lb scales, side shift, 54" lumber forks, 3650 hrs, s/n: 70Y0067
  • 1987 CAT V180B 18,000 lb dual pneumatic forklift, CAT 3208 diesel, 218" 2-stage mast, MARTIN DECKER 20,000 lb scales, side shift, 54" lumber forks, 14195 hrs, s/n: 68Y00748
  • (2) CAT V180B 18,000 lb dual pneumatic forklifts, CAT 3208 diesel, 218" 2-stage mast, side shift, 54" lumber forks, 18301 hrs, s/n's: 68Y01220, 68Y00354
  • 1979 CAT V160 16,000 lb dual pneumatic forklift, CAT 3208 diesel, 194" 2-stage mast, side shift, 54" lumber forks, 19391 hrs, s/n: 17V758
  • (2) 1978 CAT V160 16,000 lb dual pneumatic forklifts, CAT 3208 diesel, 194" 2-stage mast, side shift, MARTIN DECKER 20,000 lb scales, 54" lumber forks, 13544 hrs, 17678 hrs, s/n's: 17V745, 17V644
  • 1988 CAT V80E 8000 lb pneumatic forklift, propane, 188" 3-stage mast, side shift, 44" forks, s/n: 77X1998
  • (2) CAT V160B forklifts, s/n's: 68Y00354, 67Y00171 (parts machines)
  • HYSTER H165H forklift (parts machine)
  • 1975 LORRAIN LRT15H 8x4 swivel grapple heel boom log loader, PIERCE carrier, CUMMINS 6V71, 250 diesel engines, ALLISON power shift transmission, WILLIAMS air shift controls, outriggers, 14.00-20 tires, 2178 hrs, s/n: 35409
  • MARKLIFT 62C self propelled manlift, 60' boom height, 600 lb capacity, 4 cyl gas or propane, 15-19.5 tires, 488 hrs, s/n: 386-M2459
  • KENWORTH W923 T/A water truck, CUMMINS 8V71 diesel, approximately 2000 gallon tank, PTO, pump, front, back and side sprayers
  • 1979 EDWARDS DS4200 DYNA SOAR mobile strapping station, 20 hp twin cylinder ONAN gas, 9.6 cubic feet compressor, aerial boom, basket, s/n: DS-42-08
  • LANDA SEHW 6-3500 Platinum series trailer mounted pressure washer, diesel or gas
  • 1993 NISSAN 4x4 pickup, gas, 4 spd, a/c, radio, PRO TECH tool box
  • 1993 FORD RANGER pickup, 6 cyl gas, 4 spd, a/c, c/b, ladder rack
  • 1992 GMC X71 4x4 1/2 ton extended cab pickup, V8, auto, p/s, p/b, a/c, p/wdw, p/lock, DVD, radios, PRO TECH tool box
  • 1988 FORD F350 1 ton utility truck, V8, auto, utility box, ladder rack
  • 1986 CHEVY 350 cargo can, V8
  • 1981 FORD F350 1 ton utility line truck, V8, manual, 24' bucket boom, STAHL utility body, 1340 miles
  • 1973 INTERNATIONAL LOADSTAR 1600 flatbed truck, V8, manual, 14' tilt flatbed, PTO
  • Rebuilt DETROIT 6V71 diesel engine
  • rebuilt CAT 950 transmission
  • (10+) CAT, DETROIT, PERKINS diesel engines, cores
  • forklift masts, forks, carriages, axles, cylinders, wheels, tires
  • CAT parts
  • man basket, tower
  • dump boxes (SOME ITEMS MAY BE SOLD ON DAY 2)

  • AUCTIONEERS NOTE: The following items at Alton will not be available for the auction

Whole Log Chipper
  • NICHOLSON 104" left hand 5/10 knife whole log chipper, GE 752 1000 hp, 3/4" chip, energy dissipater, horizontal infeed and outfeed, 1992 SAFTRONICS KDC6-2000-4, 1000 hp/0-500 volt solid state DC starter, 1992 IES interface panel, MATRA 1000 kva 480Y-277 volt isolation transformer, 42' box chain infeed, motor, FALK square box reducer, s/n: 2739317B

Debarkers
  • SALEM MKII 27" 5-arm ring debarker, TOSHIBA 50 hp/1175 rpm ring drive, GENCO 30 hp/1140 rpm DC feed drive, GENCO 30 hp gen set, in and out hold down rolls, 47' 3-strand H150 infeed log haul, motor to reducer, 52' 2-section H110 outfeed log haul, motors, reducers, (2) 40' 5-strand H124 infeed log decks, motors, FALK square box reducers, cab, controls, oiler, s/n: 8090462
  • SCHURMAN 50' rosserhead debarker w/double trunion rolls, GE 125 hp/1775 rpm rosserhead drive, (2) GE 25 hp, 30 hp/1150-4500 rpm DC trunion drives, GE 60 hp/1200 rpm gen set, IES 15 hp/1800 rpm DC drive, 18'x7-stand H124 outfeed transfer, (2) 20' 5-strand H124 infeed log decks

Whole Log Cut Off Saw
  • L&M HHA300 60" bar type whole log cut off saw, 30 hp, 10 hp hydraulic unit

Hydraulic Log Splitter
  • 8' hydraulic log splitter, 50 hp, 44' H150 infeed log haul, motor, square box FALK reducer, 11' hourglass rollcase w/gate, motor to reducer, 8' 5-strand H124 feed thru transfer, motor to FALK reducer, 45' 4-strand, 18' 3-strand H84 outfeed transfers, motors to reducers, clean out conveyor w/motor, cab/ controls

Chip Bins & Conveyors
  • PEERLESS approximately 30-unit hydraulic chip bin, approximately 15 hp
  • (2) PEERLESS approximately 24-unit air operated chip bins
  • Approximately 80'x48" chevron belt conveyor
  • 150' 2-strand H110 conveyor
  • 110' H84 conveyor w/flites
  • 18' H78 conveyor w/flites, drives

Electrical
  • MGM 1500 kva transformer 12470 to 480Y/277 volts, w/SQUARE D pad mount switch, s/n's: 87-51234, 44070-50-51
  • Selection of starters, disconnects, breakers, transformers, mill wire conduit, poles, lights

Rolling Stock
  • (2) LORAIN 60R 8x4 swivel grapple heel boom log loaders, PIERCE carrier, CUMMINS 6V71, 250 diesels, ALLISON power shift transmission, WILLIAMS air shift controls, outriggers, 14.00-20 tires, s/n: 34753
  • JLG 60F self propelled manlift (parts machine)

Miscellaneous
  • 10,000, 550 gallon double wall fuel tanks w/(2) BENNETT pumps
  • (4) 220, 110 gallon oil tanks
  • 5 ton trailer loader
  • mill and shop buildings
  • more

TERMS & CONDITIONS
  • 10% BUYERS PREMIUM
  • PAYMENT: Full payment must be made by no later than 4pm, Friday, September 22.
  • A 25% deposit is required by the close of business, each auction day.
  • Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
  • Absentee bids accepted with 25% deposit
  • REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
  • Announcements made by the auctioneer at the time of sale take precedence over printed matter.
  • Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
  • Due to safety & insurance reasons, persons under 12 not admitted.

  • Washington Auctioneers License #48
  • CA Bond #445652C

DRIVER DIRECTIONS
  • Eel River Lumber, Fortuna, CA: The auction site is on Hwy 101, approximately 4-1/2 miles south of Fortuna and approximately 1-1/2 miles north of Rio Dell, CA

  • Eel River Lumber, Alton, CA: From Hwy 101, approximately 1-1/2 miles south of Fortuna, drive east on Hwy 36 approximately 2 miles

WATCH FOR AUCTION SIGNS

FOOD SERVICE AVAILABLE AT THE AUCTION SITE


LODGING
    Super 8, Fortuna707-725-2888
    Best Western, Fortuna707-725-6822
    Comfort Inns, Fortuna707-725-7025
    Holiday Inn Express, Fortuna707-725-5500

Home | About Us | Auction Schedule | Immediate Sales | Email Signup | Map | Past Auctions | Registration Form | Advanced Bid Overview | Terms & Conditions | Best of 2000-2004 Auctions



James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247

Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554


Corporate Media Arts Group

Copyright©1997-2006 James G. Murphy Co.
All rights reserved worldwide