• CAT 950F articulated front end loader, diesel, powershift trans, w/chip bucket, s/n: 6YG02448

• 1999 VALON KONE KODIAK 636-FSC 36" 6-tool high speed air seal ring debarker, 2-speed 125 hp ring drive, 2-speed 30 hp feed works drive, 320+ FPM, s/n: 994100, w/VALON KONE BURNETT VK920 self centering infeed module, DIGITRON frequency drive electrics, controls, hydraulics, s/n: 00210
• Optimized log bucking merchandising system w/VALON KONE BURNETT 4" to 36" diameter x 30' log singulator infeed, hydraulics, log haul conveyor, automatic camera/computer controller for log length bucking decisions, 84" diameter hydraulic log cut off shop saw, 75 hp
• 60" diameter log cut off chop saw, 50 hp, log cradle
• Merchandising system transfer decks and log haul conveyors: 20'x46' wide 7-strand H132 chain deck, 5-strand H124 chain deck, 60' twin strand 132 chain conveyor w/kickers, 60' H132 chain conveyor, (2) 30' H132 chain conveyors w/kickers, SKK drives
• SALEM 50" 5-tool ring debarker w/in and outfeed chains, pneumatic in and outfeed hold down rolls (rebuilt, not installed)

• SALEM 7' left hand mechanical strain vertical head rig bandmill, slat bed clearing table, ELLISON automatic top guide setting system, automatic tail sawyer, retractable rollcase, 200 hp/1175 rpm
• CAE 36"x16' 3-knee linear positioning log carriage, 50' rail, bumpers, pantograph, tong dogs, INOVEC YIELDMASTER 1344 stereoscan setworks w/hydraulics(updated 2005), TYRONE BERRY 270 hydraulic cable carriage drive, sawyers cab
• 25' 4-strand H124 chain system infeed w/LSL, SERING hydraulic log turner, SKK drive
• SALEM 6' right hand mechanical strain vertical headrig bandmill, slat bed clearing table, ELLISON automatic guide setting system to automatic tail sawyer, retractable rollcase, 200 hp/1180 rpm
• CAE 42"x16' 3-knee linear positioning log carriage, rail, bumpers, pantograph, INOVEC YIELDMASTER 1336 stereoscan setworks, hydraulic unit, TYRONE BERRY 270 hydraulic cable carriage drive, sawyers booth
• 34' 4-strand H124 chain system infeed w/LSL, SALEM hydraulic log turner, SKK drive
• SALEM 6' right hand mechanical strain vertical headrig bandmill w/slat chain clearing table, automatic tail sawyer, belt conveyor, 200 hp/1180 rpm, s/n: 11074584
• SALEM 36"x14' 2-knee linear positioning log carriage, rail, bumpers, pantograph, tong and board dogs, INOVEC 1236 stereoscan setworks, hydraulic unit, TYRONE BERRY 270 hydraulic cable carriage drive, sawyers booth
• 60' 3-strand H124 chain system infeed w/LSL, SALEM log turner, SKK drive

• LETSON & BURPEE 5' twin horizontal right hand air strain linear positioning resaw system, 150 hp, pneumatic lumber hold downs rolls, infeed table, cant/board turners, outfeed table, right/left hand/straight discharge, SKK drives, hydraulic unit, INOVEC setworks, control booth
• LETSON & BURPEE 5' single horizontal right hand mechanical strain linear positioning band resaw, 150 hp, hydraulic driven air hold down rolls, slat bed feed thru transfer, hydraulic unit, infeed rollcase table, cant/board flippers, outfeed w/INERTIA 4-tray sort system, hydraulic unit, TEMPOSONIC setworks, control booth, s/n: A5263 (rebuilt and installed 2004)

• 1999 USNR optimized 6" gang edger system (less than 1000 hrs use); 1999 USNR 6-SBA30 6"x30" bottom splined arbor climb out gang edger, (2) 250 hp arbor drives, (2) infeed, (2) outfeed press rolls, thin kerf 4/4 and 6/4 saw guides, WATER-MIZER saw lube system, auto lube system, swing away and clam shell openings, edger infeed table, bottom fetchers, serrated quad chain infeed
• 1999 CM&E 92 left and right hand linear positioning edger chipping heads w/ring saws, 150 hp drives, hydraulic unit
• USNR top and bottom cant scanner, (6) lasers, (2) cameras on bottom top and bottom plenums, USNR graphical user INTERFACE-VAX-4000-96 solution computer, ALLEN BRADLEY 5.40 PLC wonderware trouble shooting system
• USNR 600 cant maximizer infeed system, pin stops, cant turners, cant hook cueing stations
• USNR 1706 tilt hoist, 8' to 16' lengths, 48"x48" packages, 15,000 lb rated
• SCHMID BAUER/UKIAH MACHINE 2"x48" linear positioning splined top arbor board edger, (4) shifting saws, slat bed infeed table, thin kerf babbitt saw guides, 75 hp, oil-water, saw lube system, lasers, potlatch style edge pickers, PAW-TAW-JOHN setworks, hydraulic unit
• SCHMID BAUER/UKIAH MACHINE 2"x36" linear positioning splined top arbor board edger, (4) shifting saws, slat bed infeed table, thin kerf babbitt saw guides, 75 hp arbor motor, oil-water, saw lube system, lasers, potlatch style edge pickers, PAW-TAW-JOHN setworks, hydraulic unit

• 1999 NEWNES 16x6" cut, 23' pass left hand line shaft air lift sawmill trimmer w/9' trim saw, 75 hp, feed thru lugged chain transfer, in and outfeed end evening rollcases, linear positioning minus fence, smart outfeed tipple
• 1999 NEWNES OPT-TTL 18-01 18' optimized trimmer scanner w/feed thru lug chain transfer, lug loader
• WEIGH-TEK inline heart-sap-super sap computerized system for weighing/sorting boards
• LUCIDYNE LTI-588-300 3-head black and white grade reader
• CLASSEN face grade stamp

• USNR/IRVINGTON MOORE 46-bin left hand 16' J bar vertical lumber sorter w/soft lumber landing drop arms, 90¯ infeed transfer, DC sorter drive, 81X lumber take away transfer, SKK drives, hydraulic unit, PLC, electrics, controls
• USNR/LUNDEEN 16' left hand automatic sticker stacker system w/dual cam singulating unscrambler infeed, box packaging station, stacker infeed, (14) lumber dealing arms, stacking lumber pull back arms, automatic stick placer at 1' stick placement, 4-arm hydraulic package hoist, outfeed rollcase, hydraulic unit, PLC, electrics, 3/4" x 1 1/2" x 50" stickers
• USNR/IRVINGTON MOORE 16' left hand over end cant/board stacker w/infeed transfer end evening chain, (8) lumber opening arms, auto lumber pull back arms, 5-arm hydraulic package hoist, 52" outfeed rollcase, hydraulics, PLC, electrics, 4'x6'x16' packages
• LSI 12' right hand over end board stacker w/infeed transfer, end evening chain, (4) lumber dealing arms, 3-arm hydraulic package hoist, outfeed rollcase, hydraulic unit, PLC, electrics, 4'x6' packages

• NEWMAN M-990 15"x8" 20-knife jointed planer/matcher, 150 hp top, 75 hp bottom, 75 hp and 50 hp side heads, hydraulic feed roll drives, APPLIED INNOVATIVE SOLUTIONS feed roll speed adjusters, s/n: 14261

• SIMONDS ROM942 auto bandsaw leveler, s/n: 04942-395
• (2) ARMSTRONG #4RH bandsaw grinders w/clamps, stands, s/n's: 15370, 10831
• ARMSTRONG #4LH bandsaw grinder w/clamp, stand, s/n: 11716
• (2) ARMSTRONG #6LH bandsaw grinders w/clamp, stand, s/n's: 14735, 11364
• ARMSTRONG #6RH grinder with clamp and stand
• ARMSTRONG #6 bandsaw stretcher roll w/leveling block, welding clamp, s/n: 14592
• (2) ARMSTRONG #5 bandsaw stretcher rolls w/leveling block, welding clamp, s/n's: 10633, 10627
• UNITED 60" straight knife grinder, s/n: 976
• ARMSTRONG #54 circular saw hand gummer
• FOLEY 308 chain saw sharpener
• HOE style saw guide milling machine
• Single side babbitt mill
• ARMSTRONG tension gauge grinder
• assorted round saws
• band saws
• much more

• JEFFREY 54WB drop feed bottom discharge hammer hog w/super rotor, TOSHIBA 300 hp/1180 rpm, s/n: 13362
• PRECISION 6618, 66" 8-knife horizontal feed top discharge chipper, 300 hp/580 rpm, s/n: C-2207
• KOCKUMS 8'x8' 3-deck chip shaker screen
• PEERLESS 60-unit twin gate hydraulic chip bin w/cyclones
• PEERLESS 30 unit hydraulic chip bin
• 6-unit surge bin w/twin auger clean out, cyclone
• SUTORBILT1230-5111, 150 hp, SUTORBUILT 9x20, 60 hp rotary lobe blowers
• RADER PNEUMATICS 24x20, 20x20 chip feeders w/injector pipes, gearhead drives
• ARCHER size 60, 40 hp and 24", 15 hp low pressure blowers
• Approximately 1000' high pressure 8" and 12" diameter blowpipe

• CLARK 94 approx 40,000 cfm capacity CBI 4-fan dust collection baghouse w/blower, spiral blowpipe throughout mill, s/n: 494CCTA-89-641

• SQUARE D 2000 kva 13200Y/7620 to 480Y/277 volt 3-phase pad mount WYE transformer, s/n: 980290-VA (non PCB)
• SUNBELT TRANSFORMER INC 2000 kva 13200 to 480/277 volt 3-phase pad mount WYE transformer, s/n: 6M-172904 (non PCB)
• (2) SQUARE D 1500 kva 13200/7620 to 480/277 volt 3-phase pad mount WYE transformers, s/n's: 840465A-R2, 840465A-R1
• (2) GENERAL ELECTRIC 1500 kva 13200 GRDY/7620 to 480/277 volt 3-phase pad mount WYE transformers, s/n's: L705883TCLA, L705882TLA (non PCB)
• SQUARE D 2500 amp 480Y/277 volt breaker panel, 2500 amp main breaker w/(4) assorted breakers
• ALLEN BRADLEY 9-section 20-station MCC w/(2) 250 hp, (2) 150 hp SMC plus starters
• SQUARE D 17-section 64-station MCC
• 9-section 39-station MCC
• 7-section 25-station MCC
• 4-section 20-station MCC
• CUTLER HAMMER 11-section 35-station MCC
• 11-section 30-station
• 5-section 20-station MCC
• 3-section 13-station MCC
• 3-section 11-station MCC
• 2-section 9-station MCC
• (3) ALLEN BRADLEY SMC flex motor controllers
• SAFTRONICS, MOTORTRON CS 300 hp solid sate R voltage starters
• large quantity stand alone starters
• disconnects
• breakers
• lighting transformers
• frequency AC motor controllers
• conduit and wire throughout sawmill area

• (3) SULLAIR 25-200L 200 hp rotary screw air compressors, s/n's: 023-70452, C44677FGI, 003-58635
• PNEUMATECH TE3100 3100 scfm regenerative twin tower desiccant air dryer, s/n: 0108-5136-273-027330
• 16'x6' diameter vertical air receiver tank
• Air lines and valves throughout sawmill area

• KING BEARING w/(2) 60 hp pumps
• FAC w/40 hp, 20 hp pumps
• KYPOWER w/30 hp, 15 hp pumps
• (2) thermal transfer w/30 hp pump
• HPS w/30 hp pump
• HPD w/30 hp pump
• INOVEC w/30 hp, 2 hp pumps
• (1) FLUID POWER w/20 hp pump
• 25 hp, 10 hp, (2) 2 hp, 3 hp single pump hydraulic units

• Balanced MILLPOWER vibrating conveyors including: 60'x30" pan bottom(new-never installed)
• 120'x24" pan bottom, fines dropout, fiberglass trough, metal detector
• 66"x18" pan bottom
• 60'x18" pan bottom
• (2) 110'x24" pan bottom
• 70'x24" pan bottom
• 80'x24" pan bottom (most vibratory conveyors w/wear liners)

• 3-arm hydraulic tilt breakdown hoist w/65" arms, 12' lift
• Assortment of lumber transfers, rollcases, belt conveyors, singulators, drag chain waste conveyors, most w/SKK gearhead motors
• Approx 150'x250' wood and steel framed sawmill building w/steel substructure, spare machinery parts, mill supply inventory, and much, much more

• LETOURNEAU 2594 articulated solid state 4 wheel drive log stacker, CUMMINS big cam 400 diesel engine, s/n: 1056
• CATERPILLAR 980C articulated front end loader, MEDFORD log forks, diesel, 4-speed powershift trans, s/n: 63808864
• (2) 1994 TEREX 2766-B articulated off road end dump trucks, CUMMINS 6 cylinder 250 hp diesel, 6-speed auto trans,15.7 yard boxes, 55,175 lb payload capacity, disc brakes, power steering, s/n's: A4731146/16, A4731144/16
• 1965 KENWORTH 3000 gallon T/A water truck, CUMMINS turbo charged 350 diesel, 5/2 trans, PTO pump w/baffled tank, 4" diameter spray bar, 1 1/2" fire hose, power reel
• 17' T/A flatbed trailer, electric brakes, 6" channel construction
• Log trailer loader

• 10% BUYERS PREMIUM
• PAYMENT: Full payment must be made by no later than 4pm, Friday, May 12.
• A 25% deposit is required by the close of business, each auction day.
• Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
• Absentee bids accepted with 25% deposit
• REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
• Announcements made by the auctioneer at the time of sale take precedence over printed matter.
• Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
• Due to safety & insurance reasons, persons under 12 not admitted.
  
  
• Washington Auctioneers License #48

• From downtown Grangeville, drive north on Hwy 13 approximately 25 miles to the auction site, located on the left. Approximately a 30 minute drive.

WATCH FOR AUCTION SIGNS

• Lewiston, Idaho is served by Horizon Airlines & Delta/Skywest Airlines. Approximately 75 miles from Grangeville.
• Grangeville Airport(S80) has a 5180' runway, Avgas and Jet A. Tiedowns are available next to Gene's hangar.

SUPER 8 MOTEL(Grangeville)		208-983-1002
ELKHORN LODGE(Grangeville)		208-983-1500
DOWNTOWNER INN(Grangeville)		208-983-1110
WHITEBIRD MOTEL(Whitebird)		208-839-2308
MT STUART MOTEL(Kooskia)		208-926-0166

FOOD SERVICE AVAILABLE AT THE AUCTION SITE