• 1993 NICHOLSON A4 35" 6-arm ring debarker, s/n: 6377

• 104" swing arm pneumatic log cut off circular saw, 100 hp, log clamps
• 40' 6-strand H124 chain split log deck, S-drive
• 50' H132 chain log haul conveyor, S-drive
• 60' H132 chain log haul conveyor with kickers
• 60'x30' 6-strand H124 chain cross over log transfer

• PRESCOTT 7' right hand mechanical strain vertical head rig bandmill w/slat chain clearing table, ELLISON automatic top guide setting system, hoe guides, 1" thick to wheel, drive, spare top wheel, 22'x36" retractable tail sawyer rollcase
• SALEM 42-60LPC 24'x54" 3-knee right hand linear positioning log carriage w/ 2-tong type scissor dogs, (5) trucks, rail bumpers, pantograph, 20' INOVEC 386 YIELDMASTER setworks upgraded to stereoscan in 2003, DYNA-VISION laser scan heads, hydraulic support unit, 250 hp carriage drive motor, sawyers booth
• CM&E #34 right hand 8-knife linear positioning pre-slabber, 200 hp
• 30' 3-strand H124 chain system infeed w/LSL, SERING 48" ducking dog type log turner, 40 hp hydraulic unit

• SALEM 5' left hand high strain vertical head rig bandmill, slat chain clearing table, double column, motorized column lift, electric top guide adjustment w/brake, hydraulic tilt back wheel hood, drive, s/n: L159478-92
• SALEM 14'x20" 3-knee linear positioning log carriage w/rail, bumpers, pantograph
• INOVEC YIELDMASTER 386 setworks upgraded to stereoscan in 2003, DYNA-VISION laser scan heads, hydraulic unit, FRANK electric 200 hp DC carriage drive, sawyers booth
• CM&E #18 left hand 6-knife linear positioning pre-slabber, 125 hp
• 4-strand H124 chain system infeed w/LSL, 36" ducking dog type log turner, 25 hp hydraulic unit

• PRESCOTT 7' left hand mechanical strain horizontal band resaw, 250 hp, double column overhead wheel design, 11 1/2" wheel face, dual side shifting feed thru slat chain transfer, hydraulic press feed rolls, 20' shifting dual side infeed rollcase, hydraulic drive, 22' outfeed rollcase separator system, left and right hand tipple gates

• NEWNES 20' optimized edger line w/NEWNES 2"x36" board edger, (3) linear positioning saws, 200 hp, 20' serrated chain edger infeed, linear positioning, pneumatic clamping board gathering arms, NEWNES AUTOMATION INC 8GALGS120BP 20' optimizing edger board scanner, 22' 2-section feed thru transfer, (4) sets lumber hook arms, drop out gate, pin stops, NEWNES NU-TRONIC lug loader, unscrambler computer, controls, electrics, hydraulics, s/n: F92-028 (capable of 30 boards per minute)
• USNR/SCHURMAN 6SBA48, 6"x48" combination bottom splined arbor edger, 6" gang side, 5 linear positioning saw side WATERMIZER system, clam shell, swing away openings, thin kerf guides, powered infeed/outfeed press rolls, lasers, 22' knurled infeed rollcase, positioning chains, cant and board flippers, line bar, control cab, PLC, controls

• LSI 20'x5" cut, 24' pass, individually motorized air lift right hand sawmill trimmer, 7 1/2 hp, 24" diameter saws, feed thru transfer, end evening rollcase, minus fence
• NEWNES AUTOMATION INC 86ALGS120BP 20' optimizing trimmer board scanner w/feed thru chain transfer, end evening rollcase
• SALEM 20' cut, line shaft air lift left hand planer mill trimmer, w/feed thru lug chain transfer, end evening in and out rollcases, minus fence, s/n: 74-61272
• LUCIDYNE 300 grade reader, s/n: 002

• LSI 20' capacity 46-bin right hand pusher lug type vertical lumber sorter, 90 degree infeed, 81X 5-strand take away chains, computer, PLC, hydraulic unit
• LSI 20' capacity auto sticker stacker w/(13) auto sticker placers, sticker infeed system, 49" stickers, 5-arm hydraulic package, 40' multi section stacker infeed, lumber dealing arms, end evening rollcase, NU-TRONIC lug loader, unscrambler, controls, electrics, hydraulic unit, outfeed package deck
• SALEM 20'capacity over end mechanical planer mill package stackers w/53" dealing arms, infeed transfers, end evening chains, outfeed

• NEWMAN M712 8'x16' 12-knife planer/matcher/profiler, 100 hp top head, 50 hp bottom head, side heads, 35 hp top and bottom profile heads, DC feed roll drive, 10' planer bridge, NEWMAN M-255 pineapple feed table
• 37' 5-strand C131 chain planer line package deck w/4-arm mechanical breakdown hoist, 55" arms, 7' lift, 16' 6-strand 81X breakdown hoist spill table, WAGNER 683 moisture detector, (4) search coils, sticker auto reclaim system, 14'x24", 8'x36" planer outfeed and slow down belts, 30' 6-strand H138 grading chain
• LUCIDYNE TECHNOLOGIES LTI588-101 grade reader, s/n: 107
• (4) WILLETT 450 SI inkjet grade printers

• IRVINGTON MOORE CLT continuous lumber stress tester w/18'x35' canted roll pineapple style feed table, 13'x15" canted roll bridge controls, s/n: 20268

• MAC FAB TS44 lumber unit package strapper w/feed thru rollcase, unit end evening press, hydraulic side to top squeeze, SIGNODE PFSIA power strap feeder, SIGNODE 3/4" pneumatic hand held bander, unit wrap station, hydraulic unit, electrics, in and outfeed package decks, s/n: 3954

• LSI 106'x35' steam heated, aluminum shell, bolt together zone controlled double track dry kilns, (12) regulator valves, (10) 15 hp fans, condensate pumps, graphs, electrics, computer
• LSI 106'x35' steam heated, aluminum shell, bolt together line shaft dry kiln, (2) 75 hp line shaft fan drives, graphs, electrics
• BABCOCK & WILCOX 4500 lb/hour hog fuel fired field erected dutch oven style boiler system w/pumps, tanks, fans, WELLONS controls, fuel storage, boiler buildings
• Assortment of cinder block dry kilns w/(3) sets of tracks, 12' 8" wide x 14' 9" high aluminum doors, 9'x52" I-beam kiln carts 6' center to center on wheels, kiln rail

• CATERPILLAR 438 kva/350 kw 480 volt 3-phase generator, CAT 3208 diesel

• LAMB 30" drop feed, bottom discharge hammer hog
• HANSEL 66" 8-knife horizontal feed, top discharge chipper, 200 hp/700 rpm
• (2) PEERLESS 24-unit bark and sawdust bins w/hydraulic unit
• (2) PEERLESS 24-unit chip bins w/distribution conveyor, hydraulic unit
• (3) PEERLESS 14-unit shavings bins w/distribution conveyor, hydraulic unit
• KOCKUMS KS77, 7'x7' 3-deck chip shaker screen
• 150 hp 60" low pressure blower
• WESTERN PNEUMATIC 125 hp, 40" low pressure blower
• 11' diameter cyclone with 3-auger surge bin

• SULLAIR 25-150L, 150 hp rotary screw air compressor, s/n: 18456IGD
• Assortment of receiver tanks, piping, valves throughout plant site

• CUTLER HAMMER 3000 amp rated metered switchboard with 5 switches; CUTLER HAMMER 1200 amp switchboard w/(4) breakers
• SQUARE D 1600 amp main mill disconnect switch
• CUTLER HAMMER EE line 1200 amp switchboard
• ALLEN BRADLEY 9-section, 41-station motor control center
• ALLEN BRADLEY 4-section, 8-station motor control center
• CUTLER HAMMER 8-section, 30-station motor control center
• CUTLER HAMMER 5-section, 14-station motor control center
• CUTLER HAMMER 4-section, 23-station motor control center
• CUTLER HAMMER 4-section, 15-station motor control center
• CUTLER HAMMER 2-section, 6-station motor control center
• Large quantity stand alone starters, disconnects, lighting transformers, reduced voltage drives, electrical parts room, installed conduit and wire throughout plant site

• (2) ARMSTRONG #4 right hand bandsaw grinders w/clamps, stands, HiD rocker assemblies, frequency inverters, s/n's: 4809, 4806
• CM&E #69 automatic multi bent knife grinder, s/n: 6912
• SCHURMAN single sided babbitt mill
• Filing room suction system, 40 hp fan

• 200'x80' all steel clear span bolt together storage building
• 105'x95' all steel clear span bolt together cooling shed
• 205'x120' all steel bolt together planer building
• 250'x35' all steel clear span bolt together sorter building
• 35'x55' all steel clear span bolt together stacker building
• Approximately 100'x200' wood and steel framed sawmill building
• 38'x150' steel clear span bolt together w/wood framed shop building
• Assortment of wood buildings, metal building additions

• Large selection log and lumber decks
• chain and belt conveyors
• log hauls
• rollcases
• vibratory conveyors including: DYNAMIC 125'x24", CARRIER 35'x18" with MDI, VIBRA-PRO 45'x30", 70'x24", 50'x24", 40'x24", 60'x18"
• hydraulic support units including: (1) w/(2) 40 hp pumps, (3) w/40 hp pumps, (4) w/30 hp pumps, (1) w/25 hp pump
• SHAW BOX 5 ton 30' underslung bridge crane
• pump house w/DETROIT 4 cylinder diesel, 75 hp electric pump
• fire protection system throughout mill
• (20) lumber stacking carts
• lumber unit covers
• SALEM 24" sweed lumber puller
• office equipment and much more

• CATERPILLAR 980C articulated front end loader, diesel, 4-speed powershift transmission, log forks, s/n: 63X04968
• CATERPILLAR 980B articulated front end loader, diesel, 4-speed powershift transmission, log forks, s/n: 89P4473
• WAGNER L90 rubber tire log loader, diesel, s/n: 1J370-413
• CATERPILLAR 140G articulated road grader, diesel, 6-speed transmission, w/BALDERSON snow wing, s/n: 72V06199
• CATERPILLAR 951B crawler loader, diesel, ROPS, s/n: 86J1190
• CASE 580 Super E loader backhoe w/extendahoe, s/n: 17027677
• CASE 580B bucket loader, s/n: 8751939
• HYSTER H200HS 20,000 lb pneumatic forklift, diesel, monotrol trans, sideshift, s/n: C007D03044J
• (5) HYSTER H165, 16,500 lb pneumatic forklifts, diesel, monotrol trans, s/n's: C007D02870H, C007D2466G, C007D02869H, C007D2483G, B007P9045W
• CLARK 0500-Y180, 17,000 lb pneumatic forklift, diesel, sideshift, s/n: Y16251144210
• CATERPILLAR T70 7000 lb forklift
• 1979 GMC BRIGADIER T/A 3000 gallon water truck, CAT 3208 diesel, 5/2 transmission
• 1958 FORD F700 fire truck w/AMERICAN LA FRANCE 73111 body, gas, 5 speed
• 1985 TRAILKING 1452-4560, 50 ton, 3-axle lowboy trailer
• TENNANT 275, 255 riding sweepers, s/n's: E1184004FG, HD1486
• FAIRBANKS MORSE 6523B, 150,000 lb capacity beam type truck scale w/10'x60' platform, CARDINAL #738, 260,000 lb x 20 lb digital read out
• ROBBINS & MYERS pin together log trailer loader, fuel tank

• 8% BUYERS PREMIUM
• PAYMENT: Full payment must be made by no later than 4pm, Friday, April 28.
• A 25% deposit is required by the close of business, each auction day.
• Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee.
• Absentee bids accepted with 25% deposit
• REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Equipment removal schedule announced on auction day.
• Announcements made by the auctioneer at the time of sale take precedence over printed matter.
• Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
• Due to safety & insurance reasons, persons under 12 not admitted.
  
  
• Washington Auctioneers License #48

• From Grangeville, ID: take ID-13, turn right onto Poor Farm Rd., turn left onto Mt Idaho Grade Rd., keep left at the fork to go on Mt Idaho Grade Rd/NF-17, turn slight right onto ID-14, go approximately 46 miles to mile marker 46 ´. The auction site is on the right.
  
  
• From Kooskia, ID: take ID-13, turn left onto Lightning Creek Rd., turn slight right onto NF-244 Rd., stay straight to go onto NF-484 Rd., turn sharp left onto ID-14, go approximately 27 miles to mile marker 46 ´. The auction site is on the right.

WATCH FOR AUCTION SIGNS

• Lewiston, ID is served by Horizon Airlines and Delta/Skywest Airlines. Approximately 125 miles to sale site.

Monty's (Grangeville)		208-983-2500
Super 8 Motel (Grangeville)		208-983-1002
Elkhorn Lodge (Grangeville)		208-983-1500
Downtowner Inn (Grangeville)		208-983-1110
Mt Stuart Motel (Kooskia)		208-926-0166

• Please allow 1-1/4 hours travel time from lodging to sale site

FOOD SERVICE AVAILABLE AT THE AUCTION SITE