|
LOT# |
QTY. |
DESCRIPTION |
| 1 | 1 | SM CYCLO 37-1/2 HP RATED/ 29:1 RATIO REDUCER (LOCATED UNDER SOUTH SIDE OF FILING ROOM) |
| 2 | 1 | FALK 20.93:1 RATIO REDUCER |
| 3 | 1 | FALK 12 HP RATED/ 25.03:1 RATIO REDUCER |
| 4 | 1 | MORSE 9.6 HP RATED/ 20:1 RATIO REDUCER |
| 5 | 1 | RADICON 5:1 RATIO REDUCER |
| 6 | 1 | G.E. 75 KVA, 480 TO 120/240V TRANSFORMER W/200 AMP DISCONNECT SWITCH |
| 7 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES ON TWO PALLETS |
| 8 | 1 | LOT, (4) ELECTRIC 3-PH CABLE HOIST W/POWER TRAVEL, BUSS BAR, RAIL (2 SHOWN IN PICTURE, LOCATED ABOVE KOCKUMS BAND MILL) |
| 9 | 1 | 12'X14' WOOD FRAME OFFICE W/AIR CONDITIONER, LIGHTS, ASSORTED MILL PARTS, & SUPPLIES (LOCATED WEST OF KOCKUMS BANDMILL) |
| 10 | 1 | LOT, (4) WINDOW & (1) FLOOR AIR CONDITIONER UNITS ON SECOND FLOOR OF MILL (ALL LOCATED NORTH OF CHIP & SAW INFEED) |
| 11 | 1 | LOT, EXPANDED METAL CATWALK & STAIRWAYS ON 2ND FLOOR OF MILL (LOCATED BETWEEN CHIP & SAW, ON NORTH END OF BUILDING) |
| 12 | 1 | LOT, ALL LIGHT FIXTURES ON 2ND FLOOR OF MILL (LOCATED BETWEEN KOCKUMS BAND MILL & NORTH END OF BUILDING - APPROX. 20 FIXTURES) |
| 13 | 1 | 60 HP HYDRAULIC PUMP (LOCATED ON WEST SIDE OF CHIP & SAW INFEED) |
| 17 | 1 | 29" DIA. ROTARY SAW WORKTABLE W/ANVIL (LOCATED IN FILING ROOM) |
| 18 | 1 | ARMSTRONG 6900BA PNEUMATIC SHAPER |
| 19 | 1 | LOT, (10) 8"X 1/4" X 1-1/4" GRINDING WHEELS |
| 20 | 1 | ARMSTRONG TRUESIZER CIRCULAR SAW DUAL SIDE TOOTH GRINDER 18194 |
| 21 | 1 | ARMSTRONG 4LH BANDSAW SHARPENER W/CLAMP, SAW STANDS, DUSTKOP DUST COLLECTOR |
| 22 | 1 | ARMSTRONG 4RH BANDSAW SHARPENER W/CLAMP, SAW STANDS, DUSTKOP DUST COLLECTOR |
| 23 | 1 | ARMSTRONG 54 CIRCULAR SAW HAND SHARPENER |
| 24 | 1 | ARMSTRONG 5 BANDSAW STRETCHER ROLL W/LEVELING BLOCKS & TABLE |
| 25 | 1 | BUEHLER 10-1010 CUT-OFF MACHINE |
| 26 | 1 | 18" BANDSAW BLADE WELDING CLAMP |
| 27 | 1 | DUSTKOP DUST COLLECTOR |
| 28 | 1 | DUSTKOP DUST COLLECTOR |
| 29 | 1 | 34' 7-STRAND H150 CHAIN LOG DECK W/H&T SPROCKETS, S-DRIVE SHAFT, LOG STOP & LOADER, STEEL RACES & PLATE, & SUPPORTS TO GROUND |
| 30 | 1 | 15' 7-STRAND H150 CHAIN LOG CROSS OVER DECK W/H&T SPROCKETS, S-DRIVE SHAFT, (2) LOG STOP & LOADERS, STEEL RACES & PLATE (NO STEEL SUB STRUCTURE INCLUDED) |
| 31 | 1 | 25 HP MOTOR W/FALK 25 HP RATED 129:1 RATIO REDUCER, & DRIVE CHAIN (LOT 29 DRIVE) |
| 32 | 1 | US 20 HP MOTOR W/FALK 20 HP RATED 129:1 RATIO REDUCER, & DRIVE CHAIN (LOT 29 DRIVE) |
| 33 | 1 | ALLIS CHALMERS 15 HP MOTOR W/FALK 15 HP RATED 126.4:1 RATIO REDUCER, & DRIVE CHAIN (LOT 30 DRIVE) |
| 34 | 1 | 103' 3-STRAND H132 CHAIN LOG HAUL CONVEYOR ON C.O. SAW INFEED, W/H&T SPROCKETS, S-DRIVE, & STEEL TROUGH (STEEL SUB-STRUCTURE NOT INCLUDED) |
| 35 | 1 | POWER-TEC 30 HP/1750 RPM BRUSHLESS DC MOTOR W/DRIVE CHAIN (LOT 34 DRIVE) |
| 36 | 1 | 1999 SUPERSAW 30RH,SS30 HIGH SPEED AUTOMATED LOG CUT-OFF CIRCULAR SAW W/HYD. FEED ROLLS, & HYD. SUPPORT UNIT W/PUMPS (MAIN FRAME NEVER INSTALLED, LOCATED IN WAREHOUSE AT WEST END OF PROPERTY) 6986 |
| 37 | 1 | 72" SWING ARM, HYD. ACTUATED LOG CUT-OFF CIRCULAR SAW W/75 HP/460V MOTOR, & LOG CLAMP (HYDRAULIC UNIT SOLD AT LOT 38) |
| 38 | 1 | SAS 40 HP HYDRAULIC UNIT W/BRUGHINGHAUS PUMP, TANK, & HEAT EXCHANGER |
| 39 | 1 | 7' X 8'6" SOUND DEADEN CONTROL CAB W/PUSH BUTTON CONSOLE, & AIR CONDITIONER |
| 40 | 1 | LOT, 37' MILL CUT-OFF SAW OUTFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, S-DRIVE, TRIM END LOG SWEEP, LOG LENGTH STOP CYLINDERS, OPCON ELECTRIC EYES, & SOME H132 CHAIN (NO STEEL SUB STRUCTURE INCLUDED) |
| 41 | 1 | POWER-TEC 30 HP/1750 RPM BRUSHLESS D.C. MOTOR W/FALK 96 HP/125 RPM REDUCER W/DRIVE CHAIN (LOT 40 DRIVE) |
| 42 | 1 | SODERHAMN CAMBIO 30" 5-ARM RING DEBARKER W/75 HP/460V RING DRIVE MOTOR, HYD. LOG INFEED/OUTFEED CENTERING FEED ROLLS, & HYD. SUPPORT UNIT |
| 43 | 1 | 14' H150 CHAIN DEBARKER INFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, STEEL TROUGH, LOG CENTERING AIR BAGS, HOURGLASS ROLL, & FALK 15 HP RATED 100 RPM REDUCER |
| 44 | 1 | 12' X 45' DIA. ROTARY DRUM DEBARKER W/TRUNION ROLLS, 150 HP/460V DRIVE MOTOR (DEBARKER IS COMPLETE, DISMANTLED, READY TO LOAD, LOCATED APPROX. 1/4 MILE SOUTHWEST OF MILL) |
| 45 | 1 | 33' TWIN-STRAND H150 CHAIN MILL DEBARKER OUTFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, S-DRIVE, & STEEL TROUGH |
| 46 | 1 | TOSHIBA 30 HP MOTOR W/FALK 25 HP RATED 100 RPM REDUCER W/DRIVE CHAIN (LOT 45 DRIVE) |
| 47 | 1 | 3-ARM PADDLE WHEEL LOG SWEEP W/HAGGLUNDS VIKING TYPE UK43-04700-AO-LN-0100 HIGH TORGUE HYD. MOTOR, & SUPPORTING STEEL STRUCTURE |
| 48 | 1 | 3-ARM PADDLE WHEEL LOG SWEEP W/HAGGLUNDS VIKING TYPE UK43-04700-AO-LN-0100 HIGH TORGUE HYD. MOTOR, & SUPPORTING STEEL STRUCTURE |
| 49 | 1 | 14' 2-STRAND 3-3/8" PITCH CHAIN LOG DECK W/H-SHAFT, T-SPROCKETS, LOG STOP & LOADER, STEEL RACES & PLATE |
| 50 | 1 | 18' 4-STRAND H150 CHAIN LOG DECK W/H-SHAFT, T-SPROCKETS, STEEL RACES & PLATE |
| 51 | 1 | 15 HP MOTOR W/FALK 10 HP RATED 30 RPM REDUCER W/DRIVE CHAIN (LOT 49 DRIVE) |
| 52 | 1 | TOSHIBA 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER, & DRIVE CHAIN (LOT 50 DRIVE) |
| 53 | 1 | 40' 4-STRAND H150 CHAIN LOG DECK W/H-SHAFT, T-SPROCKETS, LOG STOP & LOADER, LOG STOP ARMS, STEEL RACES & PLATE (NO DRIVE INCLUDED) |
| 54 | 1 | 58' 4-STRAND H150 CHAIN LOG DECK W/H-SHAFT, T-SPROCKETS, LOG STOP & LOADER, LOG STOP ARMS, STEEL RACES & PLATE (NO DRIVE INCLUDED) |
| 55 | 1 | TOSHIBA 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER W/DRIVE CHAIN (LOT 53 DRIVE) |
| 56 | 1 | 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER W/DRIVE CHAIN (LOT 54 DRIVE) |
| 57 | 1 | MDI CR85 WHOLE LOG METAL DETECTOR W/34"X25" I.D. ON SEARCH COIL (W/2'X10' FEED THRU BELT CONVEYOR & DRIVE), & SCIENTIFIC TECHNOLOGIES VS65-A001-AC1 SCANNER (MDI ELECTRONICS NOT COMPLETE) |
| 58 | 1 | 65' H150 CHAIN METAL DETECTOR INFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, S-DRIVE, STEEL TROUGH, & CATWALK (NO DRIVE INCLUDED) |
| 59 | 1 | 65' H150 CHAIN METAL DETECTOR OUTFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, STEEL TROUGH, & CATWALK (NO DRIVE INCLUDED) |
| 60 | 1 | G.E. 20HP MOTOR W/FALK 25 HP RATED/ 17.34:1 RATIO REDUCER W/DRIVE CHAIN (LOT 58 DRIVE) |
| 61 | 1 | TOSHIBA 25 HP MOTOR W/FALK 25 HP RATED/17.66:1 RATIO REDUCER W/DRIVE CHAIN (LOT 59 DRIVE) |
| 62 | 1 | LOG SORT DECK CONTROL SHACK W/CONTROL PANEL, & AIR CONDITIONER |
| 63 | 1 | 9' LOG SWEEP W/PNEUMATIC CYLINDER |
| 64 | 1 | 9' LOG SWEEP W/PNEUMATIC CYLINDER |
| 65 | 1 | 9' LOG SWEEP W/PNEUMATIC CYLINDER |
| 66 | 1 | 45' 4-STRAND H150 CHAIN LOG SORT DECK W/H-SHAFT, T-SPROCKETS, (2) SET LOG STOP ARMS, STEEL RACES & PLATE (NO DRIVE INCLUDED) |
| 67 | 1 | 45' 4-STRAND H150 CHAIN LOG SORT DECK W/H-SHAFT, T-SPROCKETS, (2) SET LOG STOP ARMS, STEEL RACES & PLATE (NO DRIVE INCLUDED) |
| 68 | 1 | 45' 4-STRAND H150 CHAIN LOG SORT DECK W/H-SHAFT, T-SPROCKETS, (2) SET LOG STOP ARMS, STEEL RACES & PLATE (NO DRIVE INCLUDED) |
| 69 | 1 | SIEMENS ALLIS 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER, & DRIVE CHAIN (LOT 66 DRIVE) |
| 70 | 1 | RELIANCE 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER, & DRIVE CHAIN (LOT 67 DRIVE) |
| 71 | 1 | G.E. 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER, & DRIVE CHAIN (LOT 68 DRIVE) |
| 72 | 1 | 18-1/2' LOG STOP & LOADER W/CYLINDER |
| 73 | 1 | 18-1/2' LOG STOP & LOADER W/CYLINDER |
| 74 | 1 | 18-1/2' LOG STOP & LOADER W/CYLINDER |
| 75 | 1 | 92' TWIN STRAND H150 CHAIN CHIP-N-SAW INFEED LOG HAUL CONVEYOR W/H&T SPROCKETS, S-DRIVE, (2) LOG STOP PINS, STEEL TROUGH, & ELECTRIC EYES |
| 76 | 1 | GE 30 HP MOTOR W/FALK 20.54:1 RATIO REDUCER W/DRIVE CHAIN (LOT 75 DRIVE) |
| 77 | 1 | 30' LOG DECK FRAME W/(2) SETS LOG STOP ARMS, 18-1/2' LOG STOP & LOADER, SOME H150 CHAIN, STEEL RACES & PLATE (NO SHAFTS INCLUDED) |
| 78 | 1 | TOSHIBA 10 HP MOTOR W/SM CYCLO 24-1/2 HP RATED/231:1 RATIO REDUCER (LOT 77 DRIVE) |
| 79 | 1 | 1999 LINDEN 4-STEP 35-DEGREE MECHANICAL STEP FEEDER W/21-1/2' INSIDE DIAMETER, & SM CYCLO 59:1 RATIO REDUCER (LOCATED IN BUILDING AT WEST END OF PLANT SITE, NEVER INSTALLED) |
| 80 | 1 | HYDRAULIC SUPPORT UNIT W/(5) 50 HP DENISON P7W-ZRIBPC00-00 PUMPS (LOCATED IN BUILDING AT WEST END OF PLANT SITE) |
| 81 | 1 | 1999 OPITIMIC 6' VERTICAL TWIN OPPOSED LINEAR POSITIONING BANDMILL W/HYD. STRAIN (LOCATED IN BUILDING AT WEST END OF PLANT SITE, NEVER INSTALLED) |
| 82 | 1 | KOCKUMS CAN-CAR 6' VERTICAL OPPOSED LINEAR POSITIONING, HYDRAULIC STRAIN BANDMILL W/125 HP BAND MILL DRIVE MOTORS, GEARHEAD DRIVEN FEED/PINCH ROLLS, 2-1/2" BOTTOM SPLINE REMOVAL CHIPPING HEAD, 30' SINGLE STRAND H78 CHAIN OUTFEED CANT TRANSFER (W/CANT HOLD DOWNS), DRIVE MOTOR, 8' OUTFEED SIDEBOARD ROLLCASE, & BANDSAW BLADES (BLADES IN DOWNSTAIRS FILING ROOM) |
| 83 | 1 | KOCKUMS CAN-CAR CHIPPING EDGER SYSTEM ON BANDSAW INFEED W/20" DIA. LOG CAPACITY, 200 HP LEFT & RIGHT HAND LINEAR POSITIONING CHIPPING HEADS, 150 HP PNEU. SHIFTING TOP CHIPPING HEAD, 125 HP STATIONARY BOTTOM CHIPPING HEAD, 20' INFEED (W/ALLIGATOR STYLE BOTTOM CHAIN), CONE MACHINERY TOP HOLD DOWN CENTER ROLLS, WGBM #7835 LOG DIA. SCANNER, & GEARHEAD DRIVE LOG TURNING CHAINS |
| 84 | 1 | 10'X10' NOISE REDUCED CHIP-N-SAW CONTROL BOOTH W/ALL CONTENTS |
| 85 | 1 | 1989 UKIAH 12' SINGLE VERTICAL DOUBLE SPLINED ARBOR EDGER W/400 HP 460V ARBOR DRIVE MOTOR, (13) VERTICAL HYD. KNURLED PINCH/ FEED ROLLS, OIL SAWGLIDE SYSTEM, 75 HP & 15 HP HYD. SUPPORT UNITS, & 15' SINGLE STRAND H78 CHAIN OUTFEED TRANSFER (MISSING ONE ARBOR MOTOR) |
| 86 | 1 | KOCKUMS CAN-CAR 2-1/2"X12" CHIPPING EDGER W/160 HP VERTICAL CHIPPING HEA ARBOR, 125 HP HORIZ. CHIPPING HEAD ARBOR, & VERTICAL SAW BOX (W/DRIVE) |
| 87 | 1 | LOT, 20'6" CHIPPING EDGER INFEED ROLLCASE W/17" CANTED ROLLS, LUMBER POSITIONING CHAINS, DRIVES, ADJUSTABLE FENCE, PUSH BUTTON CONTROL PANEL, SETWORK PANEL, & FOOT CONTROLLERS |
| 88 | 1 | LOT, 8'6" 5-STRAND 2-SECTION H78 CHAIN TRANSFER ON INFEED TO CHIPPING EDGER LINE W/(2) SHAFTS, STEEL RACES, 3 HP MOTOR, REDUCER (NO SHAFT INCLUDED, CONNECTED TO LOT 89) |
| 89 | 1 | 40' 5-STRAND H130 ROOFTOP CHAIN LUMBER LANDING TABLE W/H&T SHAFTS, STEEL RACES & PLATE, 5 HP MOTOR, & FALK 50:1 RATIO REDUCER |
| 90 | 1 | HAMMOND 330 KVA, 480V TO 575Y/332V 3-PH STEP-UP TRANSFORMER |
| 91 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 40 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 92 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 50 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 93 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 50 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 94 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 95 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 96 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 97 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 98 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 99 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 100 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 101 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 102 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 103 | 1 | ALLEN BRADLEY 1336 PLUS II SENSORLESS VECTOR 10 HP ADJUSTABLE FREQUENCY AC MOTOR CONTROLLER W/575V INPUT |
| 104 | 1 | ALLEN BRADLEY LOT, (2) 50 HP, (1) 40 HP FUSSED ELECTRONIC MOTOR BRAKES |
| 105 | 1 | ALLEN BRADLEY LOT, (5) 10 HP FUSSED ELECTRONIC MOTOR BRAKES |
| 106 | 1 | ALLEN BRADLEY LOT, (5) 10 HP FUSSED ELECTRONIC MOTOR BRAKES |
| 107 | 1 | G.E. 8000 LINE, (6) VERTICAL SECTION, 14-STATION MCC |
| 108 | 1 | G.E. 5-VERTICAL SECTION, 21-STATION MCC |
| 109 | 1 | G.E. 8000 LINE, 2-VERTICAL SECTION, 8-STATION MCC |
| 110 | 1 | G.E. 2-VERTICAL SECTIONS GE MCC W/(2) SIZE 6 MAG STARTERS, (1) 1000 AMP CIRCUIT BREAKER, & (1) 500 AMP CIRCUIT BREAKER |
| 111 | 1 | G.E. 7-VERTICAL SECTION, 15-STATION MCC |
| 112 | 1 | G.E. 7-VERTICAL SECTION, 28-STATION MCC |
| 113 | 1 | G.E. LOT, (2) 4-VERTICAL SECTION MCC (8 SECTIONS TOTAL) |
| 114 | 1 | ALLEN BRADLEY SLC-100 PROGRAMMABLE CONTROLLER |
| 115 | 1 | ALLEN BRADLEY RELAY CABINET |
| 116 | 1 | ELECTRICAL CABINET W/(1) ALLEN BRADLEY SIZE 4 MAG STARTER, (1) GE SIZE 4 REVERSING MAG STARTER, & (2) 250 AMP ADJUSTABLE TRIP CIRUIT BREAKERS |
| 117 | 1 | ELECTRICAL CABINET W/ALLEN BRADLEY SLC150 & SLC100 PROGRAMMABLE CONTROLLERS (LOCATED NEAR UKIAH SAWGLIDE SYSTEM) |
| 118 | 1 | 20' CHIPPING EDGER OUTFEED ROLLCASE W/17" CHAIN DRIVEN ROLLS, & 5 HP MOTOR W/REDUCER |
| 119 | 1 | WEBSTER 1'X14'6" PAN BOTTOM VIBRATORY CONVEYOR W/DRIVE MOTOR (LOCATED UNDER CHIPPING EDGER OUTFEED) |
| 120 | 1 | WEBSTER 1'X16'6" PAN BOTTOM VIBRATORY CONVEYOR W/DRIVE MOTOR (LOCATED UNDER UKIAH EDGER OUTFEED) |
| 121 | 1 | APPROX. 45' CHAIN DRIVEN ROLLCASE W/8'5" WIDE ROLLS, G.E. 5HP MOTOR, & MORSE 50:1 RATIO REDUCER |
| 122 | 1 | 27' 5-STRAND H130 ROOFTOP LUMBER LANDING TABLE/TRANSFER W/H&T SHAFTS, STEEL RACES & PLATE, G.E. 10HP MOTOR, & MORSE REDUCER |
| 123 | 1 | 8' 7-STRAND LUGGED 81XH INCLINED CHAIN TRANSFER W/H-SHAFT, T-SPROCKETS, STEEL RACES & PLATE, G.E. 15 HP MOTOR, & FALK 18.1:1 RATIO REDUCER |
| 124 | 1 | 18' WIDE 8-STRAND 81XH CHAIN LUMBER SINGULATOR W/6'-5 STRAND 81XH CHAIN SINGULATOR LANDING TABLE. C/W ALL SHAFTS,2 SETS LUMBER KNOCK BACK ARMS, STEEL RACES & PLATE, GE 10HP MOTOR SM CYCLO NO DATA REDUCER |
| 125 | 1 | 2'X75' BELT CONVEYOR W/H&T DRUMS, S-DRIVE, STEEL TROUGH, APPROX. 30 HP MOTOR, FALK 30 HP RATED/13.49:1 RATIO REDUCER (30" DRUMS) |
| 126 | 1 | 17"X54' BELT CONVEYOR W/TAIL DRUM, STEEL TROUGH, & MORSE 10 HP RATED/30:1 RATIO REDUCER (NO HEAD DRUM AVAILABLE) |
| 127 | 1 | 21' CHAIN DRIVEN ROLLCASE W/17" ROLLS |
| 128 | 1 | 29"X18' BELT CONVEYOR (LEADING TO NEW MILL) W/H&T DRUMS, STEEL TROUGH, G.E. 15 HP MOTOR, & FALK 6.122:1 RATIO REDUCER |
| 132 | 1 | 26"X13' PAN BOTTOM VIBRATORY CONVEYOR W/DRIVE MOTOR (LOCATED DOWNSTAIRS UNDER UKIAH EDGER) |
| 133 | 1 | LOT, 40' & 24' H116 DRAG CHAIN WASTE CONVEYORS W/H&T SPROCKETS, COMMON CENTER WALL ON STEEL TROUGH, 10 HP MOTOR, & FALK 21.13:1 RATIO COMMON DRIVE (LOCATED UNDER UKIAH EDGER) |
| 134 | 1 | 25' H110 DRAG CHAIN WASTE CONVEYOR W/H&T SPROCKETS, STEEL TROUGH, G.E. 5 HP MOTOR, & FALK 45 RPM REDUCER (LOCATED DOWNSTAIRS - SOUTH SIDE OF FILING ROOM) |
| 135 | 1 | 28' H110 DRAG CHAIN WASTE CONVEYOR W/HEAD SPROCKET, STEEL TROUGH, SLOPES, NO DATA MOTOR W/FALK REDUCER, & DISCONNECT SWITCH |
| 136 | 1 | SAS 15 HP HYDRAULIC UNIT W/HEAT EXCHANGER |
| 137 | 1 | SAS 15 HP HYDRAULIC UNIT W/HEAT EXCHANGER |
| 138 | 1 | ROYAL LOT, (2) HYDRAULIC OPERATED CHIP BINS W/AUGER DISTRIBUTION CONVEYOR,& HYD. SUPPORT UNIT (48 UNIT CAPACITY) |
| 139 | 1 | DUST COLLECTION SYSTEM W/ATTACHED BLOW PIPE (LOCATED ON TOP OF CHIP BINS) (NO DATA) |
| 140 | 1 | CHIP TRAILER DUMP W/33' HYD. TILT TRAILER DECK (W/HYD. UNIT), MOUNTED ON T/A CARRIER (W/OUTRIGGERS), & 8'X45' ACCESS RAMP (LOCATED WEST OF SAWMILL, APPROX. 1/4 MILE DOWN ROAD) |
| 141 | 1 | LOT, LOG SWEEP FRAMEWORK (LOCATED IN WAREHOUSE BUILDINGS ON WEST END OF PROPERTY) |
| 142 | 1 | 1994 DODGE INTREPID 4-DOOR SEDAN W/GAS, AUTO, AIR, AM/FM, P/W, P/L, P/S MILEAGE: OVER 100,000 2B3ED56F1RH267015 |
| 143 | 1 | 1994 BUICK 4-DOOR SEDAN W/GAS, AUTO, AM/FM/CASSETTE, P/W, P/L MILEAGE: OVER 100,000 1G4HR52L1RH490455 |
| 144 | 1 | 1993 CHEV BEAUVILLE VAN, AUTO, AM/FM/CASS, AIR, P/W, P/L MILEAGE: EXEMPT 2GAFG35K7P4106131 |
| 145 | 1 | CAT 950 PNEU. TIRE, ARTICULATED FRONT END LOADER W/G.P. BUCKET, POWER SHIFT TRANS, & DIESEL |
| 146 | 1 | HYSTER 120XL 12,000 LB HRT PROPANE FORKLIFT W/ROLL CLAMP, 3-STAGE MAST, D004V5455N |
| 147 | 1 | HYSTER H80XL 8,000 LB CUSHION-TIRE PROPANE FORKLIFT W/BALE CLAMP, 3-STAGE MAST G005D04254R |
| 148 | 1 | HYSTER H80XL 8,000 LB CUSHION-TIRE PROPANE FORKLIFT W/BALE CLAMP, 3-STAGE MAST FSD6057N |
| 149 | 1 | HYSTER H80XL 8,000 LB CUSHION-TIRE PROPANE FORKLIFT W/PARTIAL BALE CLAMP, 3 STAGE MAST F005D029274 |
| 150 | 1 | HYSTER H80XL 8,000 LB CUSHION-TIRE PROPANE FORKLIFT W/3 STAGE MAST, (NO MAST ATTACHMENTS) F005D02762K |
| 151 | 1 | KOMATSU WA30 PNEUMATIC TIRE, ARTICULATED PAYLOADER W/G.P. BUCKET 7539 |
| 152 | 1 | 1989 MACK RD690 10/12 YARD T/A DUMP TRUCK W/MAXI-TORGUE 5-SPEED TRANS, & DIESEL 1M2P195CXKW005219 |
| 153 | 1 | BOBCAT 763 LOT, SKID STEER LOADER PARTS |
| 154 | 1 | LOT, ASSORTED CIRCULAR SAW BLADES (LOCATED ON WALL IN SAWMILL FILING ROOM) |
