|
LOT# |
QTY. |
DESCRIPTION |
| 1 | 1 | 3'X5' STEEL TABLE W/VISE |
| 2 | 1 | 4'X8' STEEL TABLE |
| 3 | 1 | 26"X90" WORK BENCH |
| 4A | 1 | LOT, ASSORTED BUFFING & SANDING SUPPLIES |
| 4B | 1 | DOUBLE END PEDESTAL GRINDER |
| 5 | 1 | DOUBLE END PEDESTAL GRINDER |
| 6 | 1 | DOUBLE END PEDESTAL GRINDER |
| 7 | 1 | DOUBLE END PEDESTAL GRINDER |
| 8 | 1 | DAYTON 1/3 HP DRILL W/STAND |
| 9 | 1 | CUSTOM BUILT DRILL MACHINE W/8 HEADS & PNEUMATIC CONTROLS |
| 10A | 1 | CUSTOM BUILT DRILL MACHINE W/3 HEADS & PNEUMATIC CLAMPING |
| 10B | 1 | HERBERT 4-QCGH TURRET LATHE W/3-JAW CHUCK |
| 11 | 1 | WARNER & SWASEY #3 TURRET LATHE W/COLLET CHUCK 717868 |
| 12 | 1 | WARNER & SWASEY #3 TURRET LATHE W/COLLET CHUCK 1294356 |
| 13 | 1 | LEBLOND 20"X24" ENGINE LATHE 20RP427 |
| 14 | 1 | BENCHMASTER 7-1/2 TON PUNCH PRESS 45215202 |
| 26 | 1 | DOUBLE SIDED CANTILEVER RACK |
| 27 | 1 | DOUBLE SIDED CANTILEVER RACK |
| 28 | 1 | DOUBLE SIDED CANTILEVER RACK |
| 29 | 1 | STARTRITE H225W HORIZONTAL BANDSAW W/IN & OUTFEED; 230V, 3-PH 108106 |
| 30 | 1 | 1995 EISELE VMS 350PV AUTOMATIC COLD SAW W/COOLANT 02086 |
| 31 | 1 | 1995 EISELE VE PV BAR STOCK STAND W/INFEED 0921 |
| 32 | 1 | CUSTOM BUILT 11" 5-HP BELT SANDER; 3-PH |
| 33 | 1 | CM 2-TON CHAIN HOIST W/PENDANT CONTROLS & TROLLEY; 1-PH |
| 34 | 1 | APPROX. 9'X18' HOIST STAND |
| 35 | 1 | CUSTOM BUILT 4'X10'X4' DEEP, ELECTRIC PARTS CLEANER W/FILTER & PUMP *BASKETS SOLD AT LOTS 42-49* |
| 36 | 1 | 42"X48"X42" DEEP, FIBERGLASS TANK |
| 37 | 1 | 42"X48"X42" DEEP, FIBERGLASS TANK |
| 38 | 1 | 42"X48"X42" DEEP, FIBERGLASS TANK |
| 39 | 1 | INGERSOLL RAND SSR-EP30SE 30 HP ROTARY SCREW AIR COMPRESSOR JE0917U94297 |
| 40 | 1 | INGERSOLL RAND DXR140 REFRIGERATED COMPRESSED AIR DRYER 942DXR6270 |
| 41 | 1 | MONTAGUE GAS DRYING OVEN |
| 42 | 1 | DIP BASKET |
| 43 | 1 | DIP BASKET |
| 44 | 1 | DIP BASKET |
| 45 | 1 | DIP BASKET |
| 46 | 1 | DIP BASKET |
| 47 | 1 | DIP BASKET |
| 48 | 1 | DIP BASKET |
| 49 | 1 | DIP BASKET |
| 50A | 1 | STEEL TABLE |
| 50B | 1 | STEEL TABLE |
| 51 | 1 | CUSTOM BUILT 16" ABRASIVE CHOP SAW W/5 HP MOTOR & STAND |
| 52 | 1 | EATON LEONARD VECTORBEND MODEL #VB300CHS-LH CNC TUBE BENDER W/VE LOG CONTROLS, FINCORIMO MOTOR CONTROLS; 220V 3-PH VB30C-378-HL |
| 53 | 1 | EATON LEONARD VECTORBEND MODEL #VB75-HS-RH CNC TUBE BENDER W/CONTROLS, FINCORIMO MOTOR CONTROLS, 220V, 3-PH VB75C-127-HR |
| 54 | 1 | MCKEE-ADDISON FM-70RF TUBE FORMING MACHINE W/FOOT CONTROLS J022660FM-70RF-12 |
| 55 | 1 | ACRA VERTICAL MILLING MACHINE W/60-4200 SPINDLE SPEED, POWER FEED TABLE, & NEWELL DIGITAL READOUT; 3-PH 3617 |
| 56 | 1 | EXACTO 942B VERTICAL MILLING MACHINE W/78-5720 SPINDLE SPEED, & POWER FEED TABLE 71398 |
| 57 | 1 | WALKER TURNER 20" PEDESTAL DRILL PRESS; 1-HP, 3-PH 1EA2A |
| 58 | 1 | JET 20-1/2" PEDESTAL DRILL PRESS; 1-HP, 1-PH 800150 |
| 59 | 1 | CUMMINS 14" BENCH TYPE PEDESTAL DRILL PRESS; 3/4 HP, 1-PH |
| 60 | 1 | BLISS 20 PUNCH PRESS |
| 61 | 1 | BLISS 21 PUNCH PRESS |
| 62 | 1 | EDLUND 1-1/2 F12 2-HEAD DRILL PRESS 86254 |
| 63A | 1 | DEKA DRILL MULTI-SPINDLE DRILL PRESS 40504 |
| 63B | 1 | CABINET W/ASSORTED DRILL PRESS TOOLING |
| 64 | 1 | CUSTOM BUILT HYDRAULIC PUNCH W/DAYTON UNIT |
| 80 | 1 | 2000 ADVANCE FINISHING SYSTEM MODEL #AFSP/001WC 12'X18'X12' DOUBLE-END BATCH PARTS SYSTEM W/PUMPS & CONTROLS |
| 81 | 1 | 1999 JBI AFSP/9963B 12'X18'X12' DOUBLE-END CURING OVEN W/FORCE-10 GAS HEATING SYSTEM 10099006 |
| 82 | 1 | 1999 JBI PCB-300-S 10'X18'X12' DOUBLE-END POWER COAT SPRAY BOOTH W/(2) VERSA SPRAY II 28838-B |
| 83 | 1 | 1999 JBI AFSP/9963A 12'X18'X12' DOUBLE-END CURING OVEN W/FORCE-10 GAS HEATING SYSTEM 10099005 |
| 84 | 1 | 1999 JBI 10'X18'X12' DOUBLE-END POWDER COAT SPRAY BOOTH W/2 NORDSON EMV/EMC SPRAY UNITS, & FIRE SUPPRESSION SYSTEM |
| 85 | 1 | LANDA HBG-30 EVAPORATION WATER TREATMENT SYSTEM W/TANK & STAND |
| 86 | 1 | LOT, MONORAIL SYSTEM W/UPRIGHTS, RAILS & LIGHTS (WEST END) |
| 87 | 1 | LOT, MONORAIL SYSTEM W/UPRIGHTS, RAILS & LIGHTS (EAST END) |
| 88 | 1 | LOT, ASSORTED PARTS HANGERS & RACKS |
| 89 | 2 | NORDSON DSYS-S1 XXXXXXC1 POWDER COAT MIXER 9002889A |
| 90 | 1 | NORDSON DSYS-SBSLNX 08C1/H POWDER COAT MIXER AA01E00421 |
| 91 | 1 | NORTECK 551DCP VACUUM SYSTEM |
| 92 | 1 | LOT, POWDER COAT FINISH |
| 93 | 1 | LOT, POWDER COAT FINISH |
| 94 | 1 | LOT, POWDER COAT FINISH |
| 95 | 1 | LOT, POWDER COAT FINISH |
