|
LOT# |
QTY. |
DESCRIPTION |
| 2001 | 1 | SOUTH BEND DRILL PRESS |
| 2002 | 1 | MATERIAL HOLD DOWN SET |
| 2003 | 1 | SWEENY 5:1 RATIO TORQUE MULTIPLIER |
| 2004 | 1 | 2 ARM GEAR PULLER |
| 2005 | 1 | 2 ARM GEAR PULLER |
| 2006 | 1 | LOT, TAPER SHANK DRILL BITS |
| 2007 | 1 | SIGNODE 5/8" BANDER |
| 2008 | 1 | LOT, BANDING TOOLS |
| 2009 | 1 | LOT, BANDING TOOLS |
| 2010 | 1 | LEYLN PIPE ALIGNMENT TOOL |
| 2011 | 1 | LEYLN PIPE ALIGNMENT TOOL |
| 2012 | 1 | ELECTRIC CHAIN SAW |
| 2013 | 1 | ELECTRIC CHAIN SAW |
| 2014 | 1 | ALOM SHIM SET |
| 2015 | 1 | PNEUMATIC CHIPPING GUN |
| 2016 | 1 | PNEUMATIC CHIPPING GUN |
| 2017 | 1 | RIDGID 48" PIPE WRENCH |
| 2018 | 1 | RIDGID 48" PIPE WRENCH |
| 2019 | 1 | PELWAY HYDRAULIC CABLE CUTTER |
| 2020 | 1 | CABLE CUTTER |
| 2021 | 1 | CABLE CUTTER |
| 2022 | 1 | B&D ELECTRIC DIE GRINDER |
| 2023 | 1 | LOT, CHAIN BINDERS |
| 2024 | 1 | CIRCLE PROJECTOR |
| 2025 | 1 | HYDRAULIC JACK |
| 2026 | 1 | HYDRAULIC JACK |
| 2027 | 1 | GARDNER DENVER PNEUMATIC JACK HAMMER |
| 2028 | 1 | GARDNER DENVER PNEUMATIC JACK HAMMER |
| 2029 | 1 | LOT, HACK HAMMER BITS |
| 2030 | 1 | C.P. 1" DRIVE PNEUMATIC IMPACT WRENCH |
| 2031 | 1 | C.P. 1" DRIVE PNEUMATIC IMPACT WRENCH |
| 2032 | 1 | C.P. 1" DRIVE PNEUMATIC IMPACT WRENCH |
| 2033 | 1 | SIOUX 1" DRIVE PNEUMATIC IMPACT WRENCH |
| 2034 | 1 | C.P. 1/2" DRIVE RIGHT ANGLE PNEUMATIC IMPACT WRENCH |
| 2035 | 1 | 5/8" ELECTRIC DRILL |
| 2036 | 1 | 1/2" ELECTRIC DRILL |
| 2037 | 1 | 1/2" ELECTRIC DRILL |
| 2038 | 1 | SCOTT ENGRAVING SET |
| 2039 | 1 | CM 3 TON CAP. CHAIN HOIST |
| 2040 | 1 | MANUAL CONDUIT BENDER |
| 2041 | 1 | 8' FIBERGLASS STEP LADDER |
| 2042 | 1 | 6'X3-1/2' DIA. WASTE OIL TANK W/PNEUMATIC PUMP |
| 2043 | 1 | 6'X6-1/2' DIA. WASTE OIL TANK W/SPILL CONTAINMENT |
| 2044 | 1 | LOT, (2) WOOD START OF SALE TABLES |
| 2045 | 1 | GREENLEE PIPE BENDING TABLE |
| 2046 | 1 | BOX OF GREENLEE PIPE BENDING TOOLING |
| 2047 | 1 | GREENLEE PIPE BENDING TOOL |
| 2048 | 1 | GREENLEE PIPE BENDING TOOL |
| 2049 | 1 | GREENLEE HYDRAULIC POWER PACK |
| 2050 | 1 | ENERPAC HYDRAULIC POWER PACK |
| 2051 | 1 | GREENLEE CABLE PULLER W/(2) PULLEYS |
| 2052 | 1 | MILLER CP300 WELDING POWER SOURCE W/WIRE FEEDER |
| 2053 | 1 | LINCOLN IDEALARC R3R300 D/C ARC WELDER |
| 2054 | 1 | MILLER DIALARC 200 A/C-D/C ARC WELDING POWER SOURCE |
| 2055 | 1 | WELLSAW 58B HORIZONTAL METAL CUTTING BANDSAW |
| 2056 | 1 | NAPA PRESSURE WASHER |
| 2057 | 1 | RIDGID 535 POWER THREADING MACHINE |
| 2058 | 1 | RIDGID 200 POWER THREADING MACHINE |
| 2059 | 1 | LOT, ASSORTED PIPE CUTTERS/ RELATED TOOLING W/BOX |
| 2060 | 1 | RIDGID #141 4" THREADING HEAD |
| 2061A | 1 | RIDGID #141 4" THREADING HEAD |
| 2061B | 1 | BEAVER THREADING HEAD |
| 2062 | 1 | THREADING HEAD DRIVE LINE |
| 2063 | 1 | LOT, RIDGID THREADING HEADS |
| 2064 | 1 | RIDGID #318 OILER |
| 2065 | 1 | STEEL TOP PORTABLE TABLE |
| 2066 | 1 | U.S. 125HP/1785RPM/460 VOLT METER |
| 2067 | 1 | U.S. 75HP/1765RPM/460 VOLT METER |
| 2068 | 1 | TOSHIBA 15HP/1175RPM/460 VOLT METER |
| 2069 | 1 | SKK 30HP/37RPM GEARHEAD MOTOR |
| 2070 | 1 | SKK 30HP/84RPM GEARHEAD MOTOR |
| 2071 | 1 | SKK 15HP/125RPM GEARHEAD MOTOR |
| 2072 | 1 | SKK 5HP/68RPM GEARHEAD MOTOR |
| 2073 | 1 | SKK 5HP/125RPM GEARHEAD MOTOR |
| 2074 | 1 | SM CYCLO 11HP RATED/59:1 RATIO REDUCER |
| 2075 | 1 | EURODRIVE 7.22:1 RATIO REDUCER |
| 2076 | 1 | RELIANCE 7-1/2HP/1760RPM/460 VOLT MOTOR |
| 2077 | 1 | BROWNING 30HP RATED/13.75:1 RATIO SHAFT MOUNT REDUCER |
| 2078 | 1 | S.W. PNEUMATIC BARREL PUMP |
| 2079 | 1 | S.W. PNEUMATIC BARREL PUMP |
| 2080 | 1 | S.W. PNEUMATIC BARREL PUMP |
| 2081 | 1 | S.W. PNEUMATIC BARREL PUMP |
| 2082 | 1 | LOT, ASSORTED PNEUMATIC BARREL PUMPS |
| 2083 | 1 | DAYTON 1HP, SINGLE PHASE DIE |
| 2084 | 1 | WILTON VISE W/TABLE |
| 2085 | 1 | LOT, C-CLAMPS |
| 2086 | 1 | LOT, C-CLAMPS |
| 2087 | 1 | LOT, C-CLAMPS |
| 2088 | 1 | MOTORIZED PARTS WASH TANK |
| 2089 | 1 | MOTORIZED PARTS WASH TANK |
| 2090 | 1 | MOTORIZED PARTS WASH TANK |
| 2091 | 1 | MOTORIZED PARTS WASH TANK |
| 2092 | 1 | MOTORIZED PARTS WASH TANK |
| 2093 | 1 | MOTORIZED PARTS WASH TANK |
| 2094 | 1 | MOTORIZED PARTS WASH TANK |
| 2095 | 1 | WOOD CABINET W/ASSORTED CONTENTS |
| 2096 | 1 | LOT, HYSTER & ASSORTED PARTS W/(5) WOOD CABINETS, (1) WOOD SHELF |
| 2097 | 1 | LOT, ASSORTED PARTS W/(3) WOOD CABINETS, (1) WOOD SHELF |
| 2098 | 1 | CRUMPLISS 2440 ALTERNATOR TESTER |
| 2099 | 1 | LOT, REMAINING UNSOLD LOOSE CONTENTS OF ALTERNATOR REPAIR ROOM |
| 2100 | 1 | LOT, ASSORTED CATERPILLAR PARTS W/SHELVES, CONTENTS OF ROOM |
| 2101 | 1 | LOT, (5) LUBE REELS W/DRIP TRAYS |
| 2102 | 1 | LOT, FILTERS W/WOOD CABINET |
| 2103 | 1 | LOT, LUBE UNIT W/REEL, WOOD CABINET |
| 2104 | 1 | LOT, ASSORTED ROLLING STOCK PARTS W/WOOD SHELVES |
| 2105 | 1 | LOT, BRASS & ALUMINUM STOCK W/SHELF (IN MACHINE SHOP) |
| 2106 | 1 | U.S. SINGLE PHASE DOUBLE END GRINDER |
| 2107 | 1 | GOULD & EBERHARDT 32" UNIVERSAL SHAPER W/VISE |
| 2108 | 1 | LUGUN FU2-LAC VERTICAL MILLING MACHINE W/UNIVERSAL HEAD, POWER FEED T-SLOT TABLE |
| 2109 | 1 | G.A. GRAY METAL PLANER W/2HP TILT HEAD, 87-2720RPM SPINDLE SPEEDS, 8' T-SLOT POWER FEED TABLE |
| 2110 | 1 | LODGE & SHIPLEY BUTLER 400 15"X8' C.C., QCGH ENGINE LATHE W/3 JAW CHUCK, FACE PLATE, (2) STEADY RESTS, TAIL STOCK, TAPER ATTACHMENT 27247-365 |
| 2111 | 1 | CLAUSING COLCHESTER 17"X7' C.C., QCGH ENGINE LATHE W/3 JAW CHUCK, STEADY REST, TAIL STOCK, TAPER ATTACHMENT 7/0017/07843 |
| 2112 | 1 | SIDNEY 27"X13' C.C., QCGH ENGINE LATHE W/4 JAW CHUCK, (2) FACE PLATES, (3) STEADY REST, TAIL STOCK, TAPER ATTACHMENT, GRINDING ATTACHMENT 7496 |
| 2113 | 1 | COLCHESTER MARK II 12"X20" C.C., QCGH ENGINE LATHE W/3 JAW CHUCK, TAIL STOCK F2/67144 |
| 2114 | 1 | F.I.E. MODEL R HARDNESS TESTER W/STAND 91293 |
| 2115 | 1 | VISE W/STEEL TABLE |
| 2116 | 1 | LOT, ASSORTED MACHINE SHOP CONTENTS W/(6) WOOD CABINETS |
| 2117 | 1 | LOT, ASSORTED LOOSE MACHINE SHOP CONTENTS IN ROOM (NO ELECTRICAL) |
| 2118 | 1 | LOT, ASSORTED MACHINE SHOP CONTENTS W/(4) WOOD CABINETS |
| 2119 | 1 | CM 1/2 TON, SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY, JIB BOOM |
| 2120 | 1 | CM 1/2 TON, SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY, JIB BOOM |
| 2121 | 1 | LOT, (2) JIB BOOMS, (1) OVER LOT 2107 SHAPER, (1) OVER LOT 2122 LATHE |
| 2122 | 1 | HERCULES AJAX 24"X6-1/2' C.C., QCGH, GAP BED ENGINE LATHE W/4 JAW CHUCK, (2) FACE PLATES, (2) STEADY REST, TAIL STOCK, TAPER ATTACHMENT, CHANGE GEARS 9496 |
| 2123 | 1 | MITTS & MERRILL 9HYD-KS KEY SORTER W/TOOLING KM-742 |
| 2124 | 1 | LOT, METAL STOCK/MILL PARTS W/WOOD SHELVES |
| 2125 | 1 | LOT, SHAFTING, STRUCTURAL STEEL, ROUNDS W/RACKS, ON ON FLOOR AROUND RACKS & ON WALL BEHIND WHEEL PRESS |
| 2126 | 1 | CALDWELL WHEEL PRESS, 8' THROAT, CHAIN HOIST |
| 2127 | 1 | ENERPAC 50 TON HYDRAULIC SHOP PRESS |
| 2128 | 1 | FOSDICK 5-1/2' ARM X 15" COLUMN RADIAL ARM DRILL PRESS W/POWER HEAD, T-SLOT KNEE |
| 2129 | 1 | LOT, DRILL BITS ON TOP TWO SHELVES |
| 2130 | 1 | LOT, DRILL BITS ON BOTTOM THREE SHELVES W/CABINET |
| 2131 | 1 | 6'X2' T-SLOT TABLE W/PNEUMATIC VISE |
| 2132 | 1 | G.P. RG490-15 15HP BELT SANDER |
| 2133 | 1 | LOT, SANDING BELTS |
| 2134 | 1 | DOALL METALMASTER TILT TABLE METAL CUTTING BANDSAW W/BLADE WELDER, SINGLE PHASE |
| 2135 | 1 | RUTLAND BM-18 BANDSAW BLADE WELDER, SINGLE PHASE |
| 2136 | 1 | DELTA SURFACE GRINDER W/26" TABLE, SINGLE PHASE |
| 2137 | 1 | OSTER 2" CAP. POWER THREADER W/DIES IN GREEN CABINET |
| 2138 | 1 | 2 ARM HYDRAULIC GEAR PULLER, SINGLE PHASE |
| 2139 | 1 | PANDJIRIS WELDING POSITIONER, 3 PHASE |
| 2140 | 1 | LOT, MATERIAL HOLD DOWN TOOLING W/TABLE |
| 2141 | 1 | LOT, STRUCTURAL STEEL W/CART & RACK |
| 2142 | 1 | LOT, SHEAVES |
| 2143 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES (2 LOCATIONS) |
| 2144 | 1 | CM 1/2 TON CAP., SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2145 | 1 | CARBOLOY 13-1/2" DOUBLE END GRINDER W/TILT TABLES, 3 PHASE |
| 2146 | 1 | SKIL 1HP DOUBLE END GRINDER, 3 PHASE |
| 2147 | 1 | KALAMAZOO 2HP DOUBLE END GRINDER, 3 PHASE |
| 2148 | 1 | LOT, STEEL TABLE, WOOD CABINET, REMAINING CONTENTS OF ROOM NOT ALREADY SOLD |
| 2149 | 1 | 7-1/2HP, 3 PHASE ABRASIVE CUTOFF SAW W/INFEED ROLLCASE, ELECTRICS |
| 2150 | 1 | LOT, MILL SPROCKETS W/RACK |
| 2151 | 1 | 1/2HP, 3 PHASE TOOL SHARPENER, W/BUFFER WHEEL |
| 2152 | 1 | LOT, ASSORTED BEARINGS W/CABINET |
| 2153 | 1 | LOT, MARKED CABINETS ALONG WALL W/ASSORTED CONTENTS |
| 2154 | 1 | CM 2 TON CAP., SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY, RAIL(THAT'S IN FRONT OF LOT 2150 SPROCKETS) |
| 2155 | 1 | CM 1 TON CAP., SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2156 | 1 | CM SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2157 | 1 | CM 1 TON CAP., SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2158 | 1 | CM 1 TON CAP., SINGLE PHASE ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2159 | 1 | YALE 1 TON CAP. CHAIN HOIST W/TROLLEY, JIB BOOM |
| 2160 | 1 | YALE CHAIN HOIST W/TROLLEY JIB BOOM |
| 2161 | 1 | KALAMAZOO HORIZONTAL METAL CUTTING BANDSAW WITH IN/OUTFEED ROLLS, SINGLE PHASE |
| 2162 | 1 | OMW PATTERN CUTTER W/PATTERNS ON WALL |
| 2163 | 1 | BEMENT STEAM OPERATED FORGING PRESS |
| 2164 | 1 | 6-3/4" VISE |
| 2165 | 1 | LOT, FORGING AREA W/FORGE, EXHAUST HOOD W/FAN, ASSORTED LADLES |
| 2166 | 1 | WHIRLPOOL WASHING MACHINE |
| 2167 | 1 | LOT, MISC. W/WOOD SHELVES & BLUE CABINET |
| 2168 | 1 | CYLINDER BOTTLE RACK |
| 2169 | 1 | CUSTOM 50" PYRAMID PLATE ROLL W/3 PHASE GEARHEAD |
| 2170 | 1 | WHITNEY 16 GAUGE SHEET METAL BENDING BRAKE |
| 2171 | 1 | NIAGARA 5', 16 GAUGE SHEET METAL STOMP SHEAR |
| 2172 | 1 | 48" SHEET METAL INITIAL PLAT ROLL |
| 2173 | 1 | ARMSTRONG #2 STRETCHER ROLL |
| 2174 | 1 | 52" FABRICATION CONE |
| 2175 | 1 | SHEET METAL FORMER |
| 2176 | 1 | WHITNEY 3-1/2" SHEET METAL SHEAR |
| 2177 | 1 | LOT, WOOD BENCH & GRAY CABINET W/CONTENTS W/FOIL SHEETING |
| 2178 | 1 | HOBART RCC610 600 AMP WELDING POWER SOURCE W/WIRE FEEDER |
| 2179 | 1 | WIRE FEEDER |
| 2180 | 1 | LOT, ASSORTED MILL PARTS & SUPPLIES, LOOSE CONTENTS OF ROOM |
| 2181 | 1 | ALORIS QUICK CHANGE TOOL POST |
| 2182 | 1 | ALORIS QUICK CHANGE TOOL POST |
| 2183 | 1 | ALORIS QUICK CHANGE TOOL POST |
| 2184 | 1 | ALORIS QUICK CHANGE TOOL POST |
| 2185 | 1 | JACOB SPINDLE NOSE LATHE CHUCK |
| 2186 | 1 | LOT, PARALLELS |
| 2187 | 1 | ROYAL MUNOBLOC |
| 2188 | 1 | 12"X17" GRANITE SURFACE PLATE |
| 2189 | 1 | CLIMAX PORTABLE KEYMILL |
| 2190 | 1 | 12" ROTARY TABLE |
| 2191 | 1 | 17"X6-3/4" ELECTRO-MAGNETIC CHUCK |
| 2192 | 1 | L.W. INDEXING HEAD |
| 2193 | 1 | TAIL STOCK |
| 2194 | 1 | TAIL STOCK |
| 2195 | 1 | STEADY REST |
| 2196 | 1 | STEADY REST |
| 2197 | 1 | PROQUINER TAPPING ATTACHMENT |
| 2198 | 1 | SINGLE PHASE GRINDING ATTACHMENT |
| 2199 | 1 | SINGLE PHASE GRINDING ATTACHMENT |
| 2200 | 1 | SINGLE PHASE GRINDING ATTACHMENT |
| 2201 | 1 | SINGLE PHASE GRINDING ATTACHMENT |
| 2202 | 1 | MARTINDALE LATHE TYPE UNDERCUTTER |
| 2203 | 1 | IDEAL ELECTRIC CUTTER |
| 2204 | 1 | HULLHORST #62 ELECTRIC CUTTER |
| 2205 | 1 | DUMORE HIGH SPEED QUILL |
| 2206 | 1 | DUMORE HIGH SPEED QUILL |
| 2207 | 1 | 5" ROTARY BASE MACHINIST VISE |
| 2208 | 1 | 6" ROTARY BASE MACHINIST VISE |
| 2209A | 1 | 5" MACHINIST VISE |
| 2209B | 1 | 14" VISE |
| 2209C | 1 | TOOL POST |
| 2210 | 1 | VISE W/STEEL TABLE |
| 2211 | 1 | CHANDLER OFFSET BORING HEAD |
| 2212 | 1 | OFFSET BORING HEAD |
| 2213 | 1 | OFFSET BORING HEAD |
| 2214 | 1 | OFFSET BORING HEAD |
| 2215 | 1 | LOT, TOOL HOLDERS |
| 2216 | 1 | LOT, TOOL HOLDERS |
| 2217 | 1 | LOT, TOOL HOLDERS |
| 2218 | 1 | LOT, TOOL HOLDERS |
| 2219 | 1 | LOT, TOOL HOLDERS |
| 2220 | 1 | LOT, TOOL HOLDERS |
| 2221 | 1 | LOT, TOOL HOLDERS |
| 2222 | 1 | LOT, MILLING MACHINE CUTTERS |
| 2223 | 1 | LOT, MILLING MACHINE CUTTERS |
| 2224 | 1 | LOT, MILLING MACHINE CUTTERS |
| 2225 | 1 | LOT, MILLING MACHINE CUTTERS |
| 2226 | 1 | LOT, MILLING MACHINE CUTTERS |
| 2227 | 1 | LOT, END MILLS |
| 2228 | 1 | LOT, REAMERS |
| 2229 | 1 | LOT, REAMERS |
| 2230 | 1 | LOT, REAMERS |
| 2231 | 1 | LOT, REAMERS |
| 2232 | 1 | LOT, REAMERS |
| 2233 | 1 | ARBOR |
| 2234 | 1 | ARBOR |
| 2235 | 1 | ARBOR |
| 2236 | 1 | LOT, MANDRILLS |
| 2237 | 1 | 1" CAP. DRILL CHUCK |
| 2238 | 1 | DRILL CHUCK |
| 2239 | 1 | LOT, DRILL CHUCKS |
| 2240 | 1 | LOT, THREADING TAPS |
| 2241 | 1 | LOT, THREADING DIES |
| 2242 | 1 | LOT, COLLETS |
| 2243 | 1 | LOT, BORING BARS |
| 2244 | 1 | BULL NOSE CENTER |
| 2245 | 1 | BULL NOSE CENTER |
| 2246 | 1 | LOT, ASSORTED CENTERS |
| 2247 | 1 | LOT, ASSORTED CENTERS |
| 2248 | 1 | LOT, ASSORTED CENTERS |
| 2249 | 1 | LOT, ASSORTED CENTERS |
| 2250 | 1 | LOT, ASSORTED CENTERS |
| 2252 | 1 | LOT, HONES |
| 2253 | 1 | LOT, LATHE DOGS |
| 2254 | 1 | LOT, LATHE DOGS |
| 2255 | 1 | 15", 3 JAW CHUCK |
| 2256 | 1 | 15", 3 JAW CHUCK |
| 2257 | 1 | 14-1/2", 3 JAW CHUCK |
| 2258 | 1 | 15", 4 JAW CHUCK |
| 2259 | 1 | 15", 4 JAW CHUCK |
| 2260 | 1 | 12", 4 JAW CHUCK |
| 2261 | 1 | 7", 4 JAW CHUCK |
| 2262 | 1 | LOT, 12"X2"X1-1/2" GRINDING WHEELS |
| 2263 | 1 | LOT, 16"X1/8"X1-1/2" ABRASIVE CUTOFF SAW WHEELS |
| 2264 | 1 | LOT, REMAINING UNSOLD GRINDING WHEELS |
| 2265 | 1 | MAGNAFLUX LIGHT |
| 2266 | 1 | 1HP MILLING MACHINE HEAD |
| 2267 | 1 | 12"X17" UNIVERSAL T-SLOT TABLE |
| 2268 | 1 | STEEL PORTABLE TABLE |
| 2269 | 1 | STEEL PORTABLE TABLE |
| 2270 | 1 | LOT, STEEL SAW HORSES W/PLYWOOD TOP, PORTABLE WOOD FRAME TABLE UNDER MACHINE SHOP TOOLING |
| 2271 | 1 | BOTTLE CART |
| 2272 | 1 | BOTTLE CART |
| 2273 | 1 | BOTTLE CART |
| 2274 | 1 | BOTTLE CART |
| 2275 | 1 | LOT, WELDING LEAD, MIG GUNS, ETC. |
| 2276 | 1 | LOT, OXY-ACETYLENE GAUGES & HOSE |
| 2277 | 1 | LOT, WELDING ROD & WIRE W/REFER |
| 2278 | 1 | LOT, WOOD CABINETS W/ASSORTED MACHINE SHOP CONTENTS |
| 2279 | 1 | LOT, DUST COLLECTION CYCLONE ON ROOF W/3 PHASE MOTORIZED BLOWER, CONNECTING BLOW PIPE (SOUTH SIDE) |
| 2280A | 1 | LOT, DUST COLLECTION CYCLONE ON ROOF W/3 PHASE MOTORIZED BLOWER, CONNECTING BLOW PIPE (NORTH SIDE) |
| 2280B | 1 | GRIZZLY SCREEN W/STAND |
| 2281 | 1 | VENEER STRIP FEEDER |
| 2282 | 1 | VENEER STRIP FEEDER |
| 2283 | 1 | VENEER STRIP FEEDER |
| 2284 | 1 | VENEER STRIP FEEDER |
| 2285 | 1 | VENEER STRIP FEEDER |
| 2286 | 1 | VENEER STRIP FEEDER |
| 2287 | 1 | RADAR PNEUMATICS SIZE 12X30-51118 ROTARY LUBE BLOWER |
| 2288 | 1 | CHIP FEEDER |
| 2289 | 1 | CPM CHIP FEEDER |
| 2290 | 1 | RADAR PNEUMATICS CHIP FEEDER |
| 2291 | 1 | ROW OF H132, C132 CHAIN |
| 2292 | 1 | PALLET OF H110 CHAIN |
| 2293 | 1 | PALLET OF H480 CHAIN |
| 2294 | 1 | PALLET OF H480 CHAIN |
| 2295 | 1 | PALLET OF ASSORTED MILL CHAIN |
| 2296 | 1 | BOX OF 81X CHAIN |
| 2297 | 1 | LOT, DEBARKER PARTS |
| 2298 | 1 | LOT, CLARK BAGHOUSE BAGS (4 BOXES) |
| 2299 | 1 | ROLL OF 24" WIDE CONVEYOR BELTING |
| 2300 | 1 | BOX OF 6-1/2" WIDE BELTING |
| 2301 | 1 | ROLL OF 8-1/2" WIDE BELTING |
| 2302 | 1 | 10HP, 3 PHASE TANK MOUNTED AIR COMPRESSOR |
| 2303 | 1 | GARDNER DENVER 10HP, 3 PHASE TANK MOUNTED AIR COMPRESSOR |
| 2304 | 1 | QUINCY 370 20HP, 3 PHASE TANK MOUNTED AIR COMPRESSOR |
| 2305 | 1 | 75", 6 KNIFE CHIPPER DISC |
| 2306 | 1 | 38" LILY PAD CHIPPER DRUM |
| 2307 | 1 | 7' INSERT TOOTH CIRCULAR SAW BLADE |
| 2308 | 1 | 7' INSERT TOOTH CIRCULAR SAW BLADE |
| 2309 | 3 | 5' INSERT TOOTH CIRCULAR SAW BLADES |
| 2310 | 1 | ZURN PSM200 200 SCFM, 100 PSIG REGENERATIVE AIR DRYER |
| 2311 | 1 | BLACK BROTHERS |
| 2312 | 1 | SCISSOR LIFT |
| 2313 | 1 | SCISSOR LIFT |
| 2314 | 1 | SCISSOR LIFT |
| 2315 | 1 | EVERETT 3 PHASE CHOP SAW |
| 2316 | 1 | SWEED SCRAP CHOPPER |
| 2317 | 1 | HEAT WAGON GAS FIRED SPACE HEATER |
| 2318 | 1 | LOT, ASSORTED ROLLING STOCK PARTS, MISC. PARTS ON TOP SHELF OF SHELVING AT NORTH END OF ROOM W/SHELVING |
| 2319 | 1 | LOT, ASSORTED ROLLING STOCK PARTS, MISC. PARTS ON BOTTOM SHELF OF SHELVING AT NORTH END OF ROOM |
| 2320 | 1 | LOT, ASSORTED ROLLING STOCK PARTS, MISC. PARTS ON FLOOR UNDER SHELVING AT NORTH END OF ROOM |
| 2321 | 1 | CIRCULAR RESAW W/ARBOR MOTOR, ADJUSTABLE INFEED ROLLCASE W/WESTINGHOUSE, SKK GEARHEAD MOTORS |
| 2323 | 1 | LOT, HOGGING HEADS, SAW BLADES W/TABLE |
| 2324 | 1 | 9'X5'7" PLATEN |
| 2325 | 1 | LOT, ALUMINUM PLANKING |
| 2326 | 1 | LOT, WIRE SLINGS ON (2) PALLETS |
| 2327 | 1 | ROW OF ASSORTED MILL PARTS |
| 2328 | 1 | PALLET OF CYLINDERS |
| 2329 | 1 | PALLET OF CYLINDERS |
| 2330 | 1 | PALLET OF CYLINDERS |
| 2331 | 1 | PALLET OF CYLINDERS |
| 2332 | 1 | PALLET OF CYLINDERS |
| 2333 | 1 | 2 ARM GEAR PULLER |
| 2334 | 1 | WAGNER 682 INLINE MOISTURE DETECTOR |
| 2335 | 1 | LOT, VARI SPEED ELECTRICS |
| 2336 | 1 | LOT, THERMAL 3 PHASE KILN W/TEST OVEN |
| 2337 | 1 | PICKUP TOOL BOX |
| 2338 | 1 | PICKUP TOOL BOX |
| 2339 | 1 | TARGET GAS FIRED WALK BEHIND CONCRETE SAW |
| 2340 | 1 | PALLET OF JACK PARTS |
| 2341 | 1 | LOT, 3 PHASE STRIP HEATERS |
| 2342 | 1 | MILLER GAS FIRED A/C-D/C WELDER GENERATOR |
| 2343 | 1 | PALLET OF ASSORTED CHAIN HOIST |
| 2344 | 1 | PALLET OF ASSORTED CHAIN HOIST |
| 2345 | 1 | PALLET OF ASSORTED CHAIN HOIST |
| 2346 | 1 | PALLET OF ASSORTED CHAIN HOIST |
| 2347 | 1 | GAS FIRED TAMPER |
| 2348 | 1 | PALLET OF ROLLING STOCK PARTS |
| 2349 | 1 | PALLET OF BEARINGS |
| 2350 | 1 | PALLET OF KILN CONTROLS |
| 2351 | 1 | BOX OF BUCKET ELEVATOR BUCKETS |
| 2352 | 1 | LOT, (4) BOXES/PALLETS OF ASSORTED BAGGED PRODUCTS |
| 2353 | 1 | ALLEN BRADLEY 1305 ADJUSTABLE FREQUENCY A/C MOTOR CONTROLLER |
| 2354 | 1 | PALLET OF FOOT CONTROLLERS |
| 2355 | 1 | PALLET OF EXTENSION CORDS & ELECTRICAL WIRE |
| 2356 | 1 | PALLET OF GEARHEADS & REDUCERS |
| 2357 | 1 | 3/4HP, 3 PHASE HYDRAULIC UNIT |
| 2358 | 1 | BOX OF MISC. PARTS |
| 2359 | 1 | BOX OF MISC. PARTS |
| 2360 | 1 | LOT, PALLET OF MISC. PARTS |
| 2361 | 1 | LOT, PALLET OF MISC. PARTS |
| 2362 | 1 | PALLET OF ASSORTED ROLLS |
| 2363 | 1 | PALLET OF ASSORTED ROLLS |
| 2364 | 1 | PALLET OF ASSORTED ROLLS |
| 2365 | 1 | PALLET OF ASSORTED ROLLS |
| 2366 | 1 | PALLET OF ASSORTED ROLLS |
| 2367 | 1 | PALLET OF ASSORTED ROLLS |
| 2368 | 1 | PALLET OF ASSORTED ROLLS |
| 2369 | 1 | PALLET OF ASSORTED ROLLS |
| 2370 | 1 | PALLET OF ASSORTED ROLLS |
| 2371 | 1 | LOT, WATER CANS |
| 2372 | 1 | LOT, LATHE PARTS |
| 2373 | 1 | LOT, CATERPILLAR RADIATORS |
| 2374 | 1 | LOT, TIRE CHAINS |
| 2375 | 1 | LOT, ROLLING STOCK & ASSORTED PARTS - REMAINING CONTENTS OF SHELF NOT ALREADY SOLD W/SHELVES |
| 2376 | 1 | LOT, SCRAP STEEL (OUTSIDE ON SOUTH SIDE OF BLDG) |
| 2377 | 1 | LOT, 12" DIA. SPIRAL BLOW PIPE |
| 2378 | 1 | LOT, STEEL RACEWAYS, STRUCTURAL STEEL |
| 2379 | 1 | LOT, RAILROAD RAIL |
| 2380 | 1 | ROYAL CRC-P-120 120 UNIT PER HOUR TRAILER MOUNTED HYDRAULIC LIFTING TANDEM SCREW CONVEYOR W/(2) 50HP DRIVE MOTORS, HYDRAULIC UNIT |
| 2381 | 1 | 20HP HYDRAULIC UNIT |
| 2382 | 1 | 30HP HYDRAULIC UNIT |
| 2383 | 1 | 40HP HYDRAULIC UNIT |
| 2384 | 1 | 15HP HYDRAULIC UNIT |
| 2385 | 1 | S/A WELDING TRAILER |
| 2386 | 1 | S/A POLE TRAILER |
| 2387 | 1 | S/A POLE TRAILER |
| 2388 | 1 | GORMAN RUPP #1402-D TRAILER MOUNTED WATER PUMP W/4 CYL GAS ENGINE |
| 2389 | 1 | GARDNER DENVER SPECVA TRAILER MOUNTED ROTARY SCREW AIR COMPRESSOR W/GAS ENGINE |
| 2390 | 1 | ROPS CANOPY |
| 2391 | 1 | ROPS CANOPY |
| 2392 | 1 | ROPS CANOPY |
| 2393 | 1 | LOT, ASSORTED ROLLING STOCK PARTS |
| 2394 | 1 | OMAHA OLYMPIC 144 TILT BED CYLINDER ASSSEMBLY |
| 2395 | 1 | LOT, CONVEYOR TROUGHING |
| 2396 | 1 | YOUNG 10' STRAIGHT DOZER BLADE (SLIP ON FORKS) |
| 2397 | 1 | CYCLONE |
| 2398 | 1 | ROW OF SCISSOR LIFT PARTS |
| 2399 | 1 | LOT, NON FERROUS METAL IN BIN (NO BIN) |
| 2400 | 1 | STEEL BIN |
| 2401 | 1 | STEEL BIN |
| 2402 | 1 | STEEL BIN |
| 2403 | 1 | STEEL BIN |
| 2404 | 1 | STEEL BIN |
| 2405 | 1 | ROW OF ASSORTED TABLES |
| 2406 | 1 | ROW OF RAILROAD TIES |
| 2407 | 1 | LOT, 3/4" STEEL ANGLE |
| 2408 | 1 | LOT, 13" DIA. STEEL PIPE |
| 2409 | 1 | LOT, ASSORTED PLASTIC PIPE |
| 2410 | 1 | LOT, ALUMINUM SPRINKLER PIPE |
| 2411 | 1 | LOT, ASSORTED STEEL PIPE, BARS, FLATS |
| 2412 | 1 | LOT, VENEER CARTS |
| 2413 | 1 | LOT, UNDER LAYMENT CLOTH |
| 2414 | 1 | LOT, (6) 4'X4'X4' OIL STORAGE TANKS W/ATTACHED PNEUMATIC & MANUAL PUMPS (IN MAIN BLDG) |
| 2415 | 1 | LOT, 225 GALLON SOLVENT TANK, ASSORTED 55 & 5 GALLON DRUMS W/FLUIDS, PNEUMATIC & MANUAL PUMPS, ETC. (REMAINING CONTENTS OF ROOM NOT ALREADY SOLD) |
| 2416 | 1 | LOT, LUBE REEL ON WALL W/DRIP PAN, DRAIN TANK (IN NEXT ROOM TO NORTH) |
| 2417 | 1 | LOT, LUBE REELS ON FLOOR |
| 2418 | 1 | LOT, UHMW CHAIN RACEWAYS |
| 2419 | 1 | CUTTING TABLE |
| 2420 | 1 | LOT, TABLES & STANDS |
| 2421 | 1 | LOT, SPREADER BARS |
| 2422 | 1 | LOT, LADDERS & WOOD BOARDS |
| 2423 | 1 | LOT, STEEL PIPE W/RACK |
| 2424 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2425 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2426 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2427 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2428 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2429 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2430 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2431 | 1 | BOX OF MISC. PARTS |
| 2432 | 1 | BOX OF MISC. PARTS |
| 2433 | 1 | BOX OF MISC. PARTS |
| 2434 | 1 | BOX OF MISC. PARTS |
| 2435 | 1 | BOX OF MISC. PARTS |
| 2436 | 1 | BOX OF MISC. PARTS |
| 2437 | 1 | BOX OF MISC. PARTS |
| 2438 | 1 | BOX OF ASSORTED PIPE FITTINGS |
| 2439 | 1 | PALLET OF OIL/WATER CANS |
| 2440 | 1 | LOT, (3) PALLETS OF GAS CANS & PROPANE BOTTLES |
| 2441 | 1 | 3 PHASE VENTILATION FAN |
| 2442 | 1 | PALLET OF VENTILATION FANS |
| 2443A | 1 | PALLET OF VENTILATION FANS |
| 2443B | 1 | 3 PHASE VENTILATION FAN OVERHEAD W/ATTACHED PIPE |
| 2444 | 1 | LOT, UHMW |
| 2445 | 1 | LOT, TIRE CHAINS |
| 2446 | 1 | 2-1/2" BELT GRINDER W/3 PHASE MOTOR |
| 2447 | 1 | SMITH ARC WELDER |
| 2448 | 1 | CUTTING TABLE |
| 2449 | 1 | 40" FABRICATION CONE |
| 2450 | 1 | LOT, WIRE SLINGS & LIFTING DEVICES |
| 2451 | 1 | LOT, WELDING ROD W/REFER |
| 2452 | 1 | LOT, CHAIN HOIST |
| 2453 | 1 | VISE W/BENCH |
| 2454 | 1 | LOT, REMAINING UNSOLD LOOSE CONTENTS OF ROOM |
| 2455 | 1 | LOT, MARKED CABINETS W/ASSORTED CONTENTS |
| 2456 | 1 | LOT, MARKED CABINETS W/ASSORTED CONTENTS |
| 2457 | 1 | LOT, MARKED CABINETS W/ASSORTED CONTENTS |
| 2458 | 1 | LOT, MARKED CABINET W/ASSORTED CONTENTS, EVERYTHING HANGING ON WALL & CONTENTS OF DRAWERS UNDER BENCH |
| 2459 | 1 | LOT, 3 PHASE MOTORIZED ENGINE STAND W/ASSORTED STANDS |
| 2460 | 1 | LOT, TABLES |
| 2461 | 1 | CM 2 TON CAPACITY ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2462 | 1 | CRANK SHAFT (NO DATA) |
| 2463 | 1 | LOT, PARTS DRAWER W/CONTENTS |
| 2464 | 1 | VAN NORMAN #777 BORING BAR |
| 2465 | 1 | KEYSTONE VALVE RESEATING SET |
| 2466 | 1 | SPRING TESTER |
| 2467 | 1 | LOT, ASSORTED TUNE UP EQUIPMENT |
| 2468 | 1 | K.O. LEE C17 KNOCK OUT |
| 2469 | 1 | ARBOR PRESS |
| 2470 | 1 | SUNNEN LB GRINDER |
| 2471A | 1 | SIOUX #645L VALVE GRINDER |
| 2471B | 1 | VALVE SEAT DRESSING TOOL |
| 2472 | 1 | VAN NORMAN #555 GRINDER |
| 2473 | 1 | CHEVROLET 350 REBUILT SHORT BLOCK ENGINE |
| 2474 | 1 | PERKINS REBUILT 6 CYL DIESEL ENGINE |
| 2475 | 1 | NTC 335 DIESEL ENGINE |
| 2476 | 1 | CHAIN HOIST W/TROLLEY |
| 2477 | 1 | LOT, ASSORTED ROLLING STOCK PARTS, MISC. PARTS, REMAINING UNSOLD LOOSE CONTENTS OF ROOM |
| 2478 | 1 | LOT, (17) ASSORTED HARD FORKLIFT TIRES (2 PALLETS) |
| 2479 | 1 | LOT, 14:00-24 AND 17.5-25 TIRES ON (1) PALLET |
| 2480 | 1 | LOT, (3) 10:00-20 TIRES |
| 2481 | 1 | LOT, (1) 11R24-5 TIRE |
| 2482 | 1 | LOT, (4) 9:00-20 TIRES |
| 2483 | 1 | LOT, (4) 10R22-5 TIRES |
| 2484 | 1 | LOT, (9) ASSORTED TIRES |
| 2485 | 1 | LOT,(15) ASSORTED TIRES |
| 2486 | 1 | LOT, (2) 250-15 TIRES |
| 2487 | 1 | LOT, ASSORTED TIRES |
| 2488 | 1 | LOT, (4) P205/65R15 TIRES |
| 2489 | 1 | LOT, (4) P205-75R15 TIRES |
| 2490 | 1 | LOT, (5) LT235/75R15 TIRES |
| 2491 | 1 | LOT, (8) ASSORTED TIRES |
| 2493 | 1 | LINCOLN SHIELD ARC SAE400 D/C ARC WELDER |
| 2494 | 1 | LINCOLN SHIELD ARC D/C ARC WELDER |
| 2495 | 1 | CHAMPION 2HP, 3 PHASE DOUBLE END GRINDER |
| 2496 | 1 | 3 PHASE DOUBLE END GRINDER |
| 2497 | 1 | STEEL TABLE W/VISE |
| 2498 | 1 | LOT, ROLLING STOCK REPAIR MANUALS |
| 2499 | 1 | LOT, MARKED CABINETS W/ROLLING STOCK PARTS & ASSORTED PARTS |
| 2500 | 1 | LOT, (2) HOSE REELS |
| 2501 | 1 | JIB BOOM |
| 2502 | 1 | MOTORIZED EXHAUST BLOWER W/HOSE & REEL |
| 2503 | 1 | CART |
| 2504 | 1 | CART |
| 2505 | 1 | ENGINE STAND |
| 2506 | 1 | ENGINE STAND |
| 2507 | 1 | TRANSMISSION JACK |
| 2508 | 1 | TRANSMISSION/REAR END WORK STAND |
| 2509 | 1 | LOT, STANDS |
| 2510 | 1 | LOT, STANDS |
| 2511 | 1 | LOT, WHEELS & DRUMS |
| 2512 | 1 | PRESSURIZED TANK |
| 2513 | 1 | PRESSURIZED TANK |
| 2514 | 1 | PORTABLE STAIRWAY |
| 2515 | 1 | PORTABLE STAIRWAY |
| 2516 | 1 | WORK PLATFORM |
| 2517 | 1 | MAN BASKET |
| 2518 | 1 | PORTABLE WORK PLATFORM |
| 2519 | 1 | PORTABLE WORK PLATFORM |
| 2520 | 1 | LOT, (2) MARKED CABINET W/ASSORTED CONTENTS |
| 2521 | 1 | LOT, (2) HOSE REELS |
| 2522 | 1 | LOT, ROLLING STOCK PARTS & ASSORTED PARTS |
| 2523 | 1 | LOT, ROLLING STOCK PARTS & ASSORTED PARTS |
| 2524 | 1 | LOT, ROLLING STOCK PARTS & ASSORTED PARTS ON WALL W/GRAY CABINET |
| 2525 | 1 | LOT, ROLLING STOCK PARTS & ASSORTED PARTS W/TABLES |
| 2526 | 1 | CHISHOLM 5 TON CAP., 3 PHASE ELECTRIC CABLE HOIST W/TROLLEY & RAIL |
| 2527 | 1 | FORK MOUNT DRUM GRAB ATTACHMENT |
| 2528A | 1 | WIRE CADDY CART |
| 2528B | 1 | WIRE CADDY CART |
| 2529 | 1 | ENERPAC MANUAL CONDUIT BENDER |
| 2530 | 1 | PRESSURIZED LUBE UNIT |
| 2531 | 1 | BEARING GREASER |
| 2532 | 1 | LOT, WEAR PLATES |
| 2533 | 1 | LOT, WEAR PLATES |
| 2535 | 1 | 6 CYL DIESEL ENGINE |
| 2536 | 1 | WAGNER L-90 LOADER TRANSMISSION |
| 2537 | 1 | WAGNER L-90 LOADER TRANSMISSION |
| 2538 | 1 | WAGNER L-90 LOADER TRANSMISSION |
| 2539 | 1 | HYSTER V-6 VORTEC 6 CYL GAS ENGINE |
| 2540 | 1 | TRANSMISSION |
| 2541 | 1 | HYSTER FORKLIFT TRANSMISSION |
| 2542 | 1 | NEW PROGRESS GEAR #542 TRANSMISSION |
| 2543 | 1 | REAR END |
| 2544 | 1 | 4" BENCH VISE |
| 2545 | 1 | 3 PHASE DOUBLE END PEDESTAL GRINDER |
| 2546 | 1 | CLAYTON DYNAMOMETER W/MUFFLER, FUEL TANK, ETC. (IN ROOM BEHIND LOT 2545) |
| 2547 | 1 | CM 5 TON, 3 PHASE ELECTRIC CABLE HOIST W/18' POWER TRAVEL BRIDGE, RAIL (NO STRUCTURE UNDER RAIL) |
| 2548 | 1 | LOT, ROLLING STOCK PARTS, ASSORTED PARTS, REMAINING LOOSE CONTENTS OF ROOM NOT ALREADY SOLD W/SHELF & CONTENTS BY LOT 2545 |
| 2549 | 1 | DROTT CENTER WEIGHT |
| 2550 | 1 | CRANE BLOCK |
| 2551 | 1 | HEADACHE BALL |
| 2552 | 1 | ROLLING STOCK CYLINDER |
| 2553 | 1 | ROLLING STOCK CYLINDER |
| 2554 | 1 | ROLLING STOCK CYLINDER |
| 2555 | 1 | ROLLING STOCK CYLINDER |
| 2556 | 2 | ROLLING STOCK CYLINDERS (CAT 235 LOGGING BOOM) |
| 2557 | 2 | ROLLING STOCK CYLINDERS (WAGNER L-90 LOADER) |
| 2558 | 10 | ASSORTED ROLLING STOCK CYLINDERS |
| 2559 | 9 | ASSORTED ROLLING STOCK CYLINDERS |
| 2560 | 1 | FORKLIFT MAST |
| 2561 | 1 | CAT D-8 CRAWLER TRACK ROLL |
| 2563 | 1 | 6 CYL DIESEL ENGINE HEAD (NO DATA) |
| 2564 | 1 | CAT BX2150 COMPRESSOR |
| 2565 | 1 | CAT TU-FLO 400 COMPRESSOR |
| 2566 | 1 | HYSTER FORKLIFT WHEEL BEARING HOUSING |
| 2567 | 1 | LOT, TURBO CHARGERS |
| 2568 | 1 | LOT, VALVE BODIES |
| 2569 | 1 | LOT, OUTRIGGER PADS |
| 2571 | 1 | RADIATOR |
| 2572 | 1 | LOT, ASSORTED RADIATORS |
| 2573 | 1 | LOT, ASSORTED RADIATORS |
| 2574 | 1 | TUXCO HYDRAULIC CYLINDER SERVICER |
| 2575 | 1 | 3 PHASE BANDSAW W/18" THROAT |
| 2576 | 1 | METAL SHELVES W/CONTENTS |
| 2577 | 1 | LOT, MATERIAL TURNING ROLLS |
| 2578 | 1 | LOT, SAW HORSES |
| 2579 | 1 | LOT, WOOD STEP STANDS |
| 2580 | 1 | LOT, EXTENSION CORDS |
| 2581 | 1 | LOT, AIR HOSE |
| 2582 | 1 | LOT, WIRE SLINGS |
| 2583 | 1 | LOT, WIRE SLINGS |
| 2584 | 1 | LOT, RIGGING CHAINS |
| 2585A | 1 | LOT, LIFTING STRAPS |
| 2585B | 1 | LOT, SWEEPER BRUSHES |
| 2585C | 1 | LOT, CABLE SHEAVES & MISC. |
| 2585D | 1 | LOT, PINS |
| 2586 | 1 | LOT, LOOSE CONTENTS OF LUNCH ROOM |
| 2587 | 1 | LOT, WOOD CABINETS/WALL LOCKERS W/CABINETS |
| 2588 | 1 | HOBART 200 AMP ARC WELDER |
| 2589 | 1 | 3 PHASE SINGLE END GRINDER |
| 2590 | 1 | LIMA SINGLE PHASE HOSE CUTOFF SAW |
| 2591 | 1 | LOT, CLEAN UP TOOLS |
| 2592 | 1 | EXHAUST FUME BLOWER W/HOSE & REEL |
| 2593 | 1 | CM 2 TON CAP. ELECTRIC CHAIN HOIST W/TROLLEY, JIB & BOOM |
| 2594 | 1 | LOT, ASSORTED PARTS |
| 2595 | 1 | WAGNER L-90 LOADER BOOM SECTION |
| 2596 | 1 | G.E. 200HP/3575RPM MOTOR |
| 2597 | 1 | LINCOLN 200HP/1780RPM MOTOR |
| 2598 | 1 | TOSHIBA 125HP/1775RPM MOTOR |
| 2599 | 1 | G.E. 100HP/1190RPM MOTOR |
| 2600 | 1 | TOSHIBA 100HP/1775RPM MOTOR |
| 2601 | 1 | CENTURY 100HP/1770RPM MOTOR |
| 2602 | 1 | LINCOLN 75HP/1175RPM MOTOR |
| 2603 | 1 | NO DATA MOTOR |
| 2604 | 1 | G.E. 75HP/1785RPM MOTOR |
| 2605 | 1 | TOSHIBA 75HP/1180RPM MOTOR |
| 2606 | 1 | RELIANCE 60HP/1770RPM MOTOR |
| 2607 | 1 | RELIANCE 50HP/1770RPM MOTOR |
| 2608 | 1 | RELIANCE 50HP/1770RPM MOTOR |
| 2609 | 1 | LINCOLN 50HP/1745RPM MOTOR |
| 2610 | 1 | LINCOLN 40HP/1775RPM MOTOR |
| 2611 | 1 | RELIANCE 40HP/1775RPM MOTOR |
| 2612 | 1 | A.C. 30HP/1750RPM MOTOR |
| 2613 | 1 | LINCOLN 30HP/1760RPM MOTOR |
| 2614 | 1 | TOSHIBA 40HP/1760RPM MOTOR |
| 2615 | 1 | G.E. 30HP/1170RPM MOTOR |
| 2616 | 1 | G.E. 30HP/1150RPM D/C MOTOR |
| 2617 | 1 | NO DATA MOTOR |
| 2618 | 1 | LINCOLN 25HP/1760RPM MOTOR |
| 2619 | 1 | NEWMAN 25HP/1765RPM MOTOR |
| 2620 | 1 | TOSHIBA 25HP/1740RPM MOTOR |
| 2621 | 1 | U.S. 25HP/1200RPM MOTOR |
| 2622 | 1 | TECO 20HP/1765RPM MOTOR |
| 2623 | 1 | BALDOR 15HP/1750RPM MOTOR |
| 2624 | 1 | G.E. 20HP/3550RPM MOTOR |
| 2625 | 1 | G.E. 20HP/1175RPM MOTOR |
| 2626 | 1 | G.E. 20HP/1755RPM MOTOR |
| 2627 | 1 | WESTINGHOUSE 20HP/1760RPM MOTOR |
| 2628 | 1 | NO DATA MOTOR |
| 2629 | 1 | LOT, ASSORTED MOTORS |
| 2630 | 1 | LOT, ASSORTED MOTORS |
| 2631 | 1 | LOT, ASSORTED MOTORS |
| 2632 | 1 | LOT, ASSORTED MOTORS |
| 2633 | 1 | LOT, ASSORTED MOTORS |
| 2634 | 1 | LOT, ASSORTED MOTORS |
| 2635 | 1 | LOT, ASSORTED MOTORS |
| 2636 | 1 | RELIANCE 100HP MG SET |
| 2637 | 1 | GENCO 25HP MG SET |
| 2638 | 1 | RELIANCE 50HP/1150RPM D/C MOTOR |
| 2639 | 1 | G.E. 40HP/1150RPM D/C MOTOR |
| 2640 | 1 | G.E. 20HP/1150RPM D/C MOTOR |
| 2641 | 1 | RELIANCE 20HP/1150-2400RPM D/C MOTOR |
| 2642 | 1 | LOT, ASSORTED D/C MOTORS |
| 2643 | 1 | 15HP MOTOR W/WESTINGHOUSE 30RPM REDUCER |
| 2644 | 1 | 10HP MOTOR W/FALK 155RPM REDUCER |
| 2645 | 1 | DODGE 15HP RATED/87.79:1 RATIO REDUCER |
| 2646 | 1 | WESTINGHOUSE 7-1/2HP/45RPM GEARHEAD MOTOR |
| 2647 | 1 | LOT, ASSORTED GEARHEAD MOTORS |
| 2648 | 1 | LOT, ASSORTED MOTORS & GEARHEADS |
| 2649 | 1 | LOT, ASSORTED GEARHEAD MOTORS |
| 2650 | 1 | LOT, ASSORTED ARBOR MOTORS |
| 2651 | 1 | LOT, ASSORTED SKK GEAR BOXES |
| 2652 | 1 | LOT, ASSORTED MOTORS, REDUCERS, GEARHEADS & PARTS |
| 2653 | 1 | 2HP PUMP |
| 2654 | 1 | CM 2 TON ELECTRIC CHAIN HOIST W/JIB BOOM |
| 2655 | 1 | CM 2 TON ELECTRIC CHAIN HOIST W/JIB BOOM |
| 2656 | 1 | LOT, ASSORTD PARTS W/CABINET & SHELVES |
| 2657 | 1 | 6-1/2" VISE |
| 2658 | 1 | 5" VISE |
| 2659 | 1 | STEEL TABLE |
| 2660 | 1 | POWERMATIC #68 TILT TABLE SAW W/10" BLADE, 5HP, 3 PHASE MOTOR |
| 2661 | 1 | B&D VERTICAL PANEL SAW |
| 2662 | 1 | DEWALT 12" RADIAL ARM SAW W/TABLE |
| 2663 | 1 | CM 1 TON ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2664 | 1 | MILL-ROUTE TABLE |
| 2665 | 1 | LOT, SIGNAGE & (2) CABINETS |
| 2666 | 1 | LOT, GRAY SHELVES W/CONTENTS, FLAMMABLE LIQUID CABINET & STAIRWAYS |
| 2667 | 1 | LOT, GRAY SHELVES W/CONTENTS |
| 2668 | 1 | LOT, UHMW W/TABLE |
| 2669 | 1 | LOT, DRAFTING TABLE, (3) MARKED CABINETS W/ASSORTED CONTENTS |
| 2670 | 1 | LOT, ASSORTED LUMBER |
| 2671 | 1 | LOT, ASSORTED TABLES |
| 2672 | 1 | LOT, CABINET W/ASSORTED CONTENTS W/HARDWARE ON WALL |
| 2673 | 1 | LOT, (2) GREEN CABINETS W/ASSORTED CONTENTS |
| 2674 | 1 | LOT, (2) GREEN CABINETS |
| 2675 | 1 | LOT, GREEN CABINET W/PULLER PTS & ASSORTED CONTENTS |
| 2676 | 1 | LOT, (2) WOOD SHELVES W/ASSORTED CONTENTS |
| 2677 | 1 | OVERHEAD FUME EXHAUST BLOWER |
| 2678 | 1 | LOT, ROLLING STOCK REPAIR BOOKS ON 2 SECTION SHELF IN OFFICE |
| 2679 | 1 | OAK DESK |
| 2680 | 1 | OAK DESK |
| 2681 | 1 | LOT, REMAINING CONTENTS OF OFFICE |
| 2682 | 1 | LOT, ASSORTED PARTS, SUPPLIES & LOOSE CONTENTS OF ROOM |
| 2683 | 1 | LOT, ASSORTED PARTS, SUPPLIES & LOOSE CONTENTS IN HALLWAY |
| 2684 | 1 | LOT, ASSORTED FASTENERS W/WOOD BIN SHELVING, METAL BIN |
| 2685 | 1 | CM 1 TON ELECTRIC CHAIN HOIST W/TROLLEY & JIB BOOM |
| 2686 | 1 | HYDRAULIC DRIVE MOTOR |
| 2687 | 1 | ENERPAC 1/3HP HYDRAULIC UNIT |
| 2688 | 1 | LOT, ASSORTED HYDRAULIC PUMPS & MOTORS ON COUNTER TOP |
| 2689 | 1 | LOT, ASSORTED HYDRAULIC SHOP PARTS ON MARKED SHELF & UNDER COUNTER |
| 2690 | 1 | LOT, ASSORTED HYDRAULIC SHOP PARTS W/2 SECTION SHELF |
| 2691 | 1 | LOT, ASSORTED HYDRAULIC SHOP PARTS W/2 SECTION SHELF |
| 2692 | 1 | LOT, ASSORTED HYDRAULIC SHOP PARTS W/2 SECTION SHELF |
| 2693 | 1 | WILTON SWIVEL BASE VISE |
| 2694 | 1 | LOT, ALL CONTENTS ABOVE BENCH W/HOSES HANGING ON WALL |
| 2695 | 1 | PORTABLE STEEL TABLE W/ATTACHED ELECTRICS |
| 2696 | 1 | 3 PHASE MOTORIZED BLOWER ABOVE LOT 95 |
| 2697 | 1 | LOT, HYDRAULIC SHOP TOOLING |
| 2698 | 1 | 4 DRAWER FILE CABINET |
| 2699 | 1 | 4 DRAWER FILE CABINET |
| 2700 | 1 | 4 DRAWER FILE CABINET |
| 2701 | 1 | LOT, LOOSE CONTENTS OF (2) OFFICES |
| 2702 | 1 | LOT, LOOSE CONTENTS OF UPSTAIRS LANDING W/MOTORS, ELECTRICAL & ASSORTED PARTS |
| 2703 | 1 | CM 1 TON ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2704 | 1 | BUDGET 2 TON ELECTRIC CHAIN HOIST W/TROLLEY & RAIL |
| 2705 | 1 | BEARING SPLITTER |
| 2706 | 1 | LOT, BEARING SPLITTERS |
| 2707 | 1 | LOT, GEAR PULLERS |
| 2708 | 1 | LOT, GEAR PULLERS |
| 2712 | 1 | LOT, CONTENTS OF BLUE CABINET |
| 2713 | 1 | ABC FIRE EXTINGUISHER |
| 2714 | 1 | ABC FIRE EXTINGUISHER |
| 2715 | 5 | FIRE EXTINGUISHERS |
| 2716 | 5 | FIRE EXTINGUISHERS |
| 2717 | 5 | FIRE EXTINGUISHERS |
| 2718 | 5 | FIRE EXTINGUISHERS |
| 2719 | 5 | FIRE EXTINGUISHERS |
| 2720 | 5 | FIRE EXTINGUISHERS |
| 2721 | 5 | FIRE EXTINGUISHERS |
| 2722 | 10 | FIRE EXTINGUISHERS |
| 2723 | 14 | FIRE EXTINGUISHERS |
| 2724 | 1 | LOT, FIRE EXTINGUISHERS |
| 2725 | 1 | LOT, LOOSE CONTENTS OF FIRE EXTINGUISHER RECHARGING ROOM |
| 2726 | 1 | LOT, LIGHT BULB CHANGING POLES |
| 2727 | 1 | HOT STICK |
| 2728 | 1 | LOT, BEARINGS |
| 2729 | 1 | SAFTRONICS SOLID STATE REDUCED VOLTAGE STARTER W/ATTACHED DISCONNECT (NO DISCONNECT ABOVE STARTER) |
| 2730 | 1 | LOT, INDEX CARD FILES |
| 2731 | 1 | VISE W/STEEL TABLE |
| 2732 | 1 | STEEL TABLE |
| 2733 | 1 | STEEL TABLE |
| 2734 | 1 | STEEL TABLE |
| 2735 | 1 | LOT, HYDRAULIC HOSES ON WALL & IN SHELF W/SHELF |
| 2736 | 1 | CUTLER HAMMER SIZE 3 REVERSING STARTER |
| 2737 | 1 | ALLEN BRADLEY SIZE 3 STARTER (509 SERIES) |
| 2738 | 1 | WESTINGHOUSE SIZE 2 STARTER |
| 2739 | 1 | LOT, ASSORTED ELECTRIC BOXES ON FLOOR |
| 2740 | 1 | DAKE 75 TON AIR/HYDRAULIC SHOP PRESS |
| 2741 | 1 | CLARK FLOOR SANDER |
| 2742 | 1 | LOT, (5) MARKED CABINETS IN ROOM W/ASSORTED CONTENTS |
| 2743 | 1 | LOT, SUMP PUMPS |
| 2744 | 1 | LOT, MOTORS, STATORS W/SHELF |
| 2745 | 1 | LOT, LOOSE CONTENTS OF ROOM W/EYE WASH STATION |
| 2746 | 1 | ROW OF ASSORTED PARTS W/HOSE ABOVE |
| 2747 | 1 | LOT, ASSORTED BEARINGS ON 2 SECTIONS OF SHELF |
| 2748 | 1 | LOT, ASSORTED BEARINGS ON 3 SECTIONS OF SHELF |
| 2749 | 1 | LOT, OIL SEALS, MISC. ON 3 SECTIONS OF SHELF |
| 2750 | 1 | LOT, ASSORTED PARTS ON 2 SECTIONS OF SHELF |
| 2751 | 1 | LOT, ASSORTED GASKETS ON 7 SECTIONS OF SHELF (3 LAYERS DEEP) |
| 2752 | 1 | LOT, ASSORTED FILTERS ON 6 SECTIONS OF SHELF |
| 2753 | 1 | LOT, ASSORTED ROLLING STOCK REPAIR PARTS ON 6 SECTIONS OF SHELF |
| 2754 | 1 | LOT, ROLLING STOCK STARTERS ON 1 SECTION SHELF |
| 2755 | 1 | LOT, ROLLING STOCK ALTERNATORS & GENERATORS W/1 SECTION OF SHELF |
| 2756 | 1 | LOT, ROLLING STOCK REPAIR PARTS ON 4 SECTIONS OF SHELF |
| 2757 | 1 | LOT, ROLLING STOCK REPAIR PARTS ON 3 SECTIONS OF SHELF |
| 2758 | 1 | LOT, ROLLING STOCK REPAIR PARTS ON 3 SECTIONS OF SHELF |
| 2759 | 1 | LOT, COMPRESSION PACKING ON 1 SECTION OF SHELF |
| 2760 | 1 | LOT, BEARINGS ON 2 SECTIONS OF SHELF |
| 2761 | 1 | LOT, FILTERS ON 5 SECTIONS OF SHELF |
| 2762 | 1 | LOT, ALL GREEN PARTS BINS ON FLOOR W/ASSORTED FASTENERS |
| 2763 | 1 | LOT, ASSORTED FASTENERS ON 4 SECTIONS OF SHELF (NO PIPE FITTINGS) |
| 2764 | 1 | LOT, ASSORTED PIPE FITTINGS ON 5 SECTIONS OF SHELF (NO FASTENERS) |
| 2765 | 1 | LOT, ALL DRIVE BELTS W/HANGERS, HANGING ON WALL W/DRIVE BELTS ON 2 SHELVES ALONG WESTERN WALL OF PARTS ROOM |
| 2766 | 1 | LOT, ADJUSTABLE WOOD PARTS SHELVING UNDER LOTS 2746 THRU 2765 (2 WEEKS BEFORE REMOVAL) |
| 2767 | 1 | CABINET W/LUMBER MARKING INK |
| 2768 | 1 | LOT, BANDSAW BLADES |
| 2769 | 1 | LOT, ASSORTED 12" GRINDING WHEELS |
| 2770 | 1 | LOT, ASSORTED GRINDING WHEELS |
| 2771 | 1 | WOOD FRAME TABLE |
| 2772 | 1 | LOT, ASSORTED CHAIN |
| 2773 | 1 | LOT, CONVEYOR DRUM TAKE UP ASSEMBLY'S |
| 2774 | 1 | LOT, STRAPPING |
| 2775 | 1 | LOT, BELTING |
| 2776 | 1 | LOT, (5) SECTIONS OF WOOD SHELVING W/MILL PARTS & SUPPLIES |
| 2777 | 1 | LOT, MILL SPROCKETS W/RACKS |
| 2778 | 1 | LOT, NEW ROLLER MILL CHAIN, REPAIR LINKS & MISC. W/SHELF |
| 2779 | 1 | LOT, BBQ'S, INSERT TRAY HOLDERS, BRIQUETS & LIGHTER FLUID |
| 2780 | 1 | LOT, LUMBER |
| 2781 | 1 | LOT, SC400 CORROSION INHIBITOR |
| 2782 | 1 | LOT, WIRE ROPE W/SHELF |
| 2783 | 1 | LOT, LIGHT BULBS |
| 2784 | 1 | LOT, SHELF #42 W/ASSORTED HOSE, 2 SPOOL ON FLOOR |
| 2785 | 1 | LOT, REMAINING SHELVING BY LOT 2784 W/ASSORTED MILL PARTS & SUPPLIES |
| 2786 | 1 | LOT, ASSORTED INSULATION ON LANDING ABOVE OFFICES |
| 2787 | 1 | LOT, ASSORTED INSULATION |
| 2788 | 1 | LOT, LOOSE CONTENTS ON LANDING ABOVE LOT 2785 |
| 2789 | 1 | LOT, RACKS AGAINST WALL |
| 2790 | 1 | BOTTLE CAGE |
| 2791 | 1 | NO DATA DUST COLLECTOR ON ROOF |
| 2792 | 1 | LOT, STRUCTURE STEEL BETWEEN BUILDING UPRIGHTS |
| 2793 | 1 | LOT, STRUCTURE STEEL BETWEEN BUILDING UPRIGHTS W/RACK |
| 2794 | 1 | LOT, STRUCTURE STEEL BETWEEN BUILDING UPRIGHTS (NO SHELVING) |
| 2795 | 1 | LOT, CANTILEVER SHELVING |
| 2796 | 1 | CM 1 TON CAP. ELECTRIC CHAIN HOIST W/CRANE BRIDGE & RAIL |
| 2797 | 1 | CM 1 TON ELECTRIC CHAIN HOIST W/JIB BOOM |
| 2798A | 1 | LOT, EQUIPMENT BATTERIES |
| 2798B | 1 | LOT, CANTILEVER SHELVING W/THICK WALL STEEL TUBING, MISC. PALLETS OF STEEL (LOCATED ON BACK SIDE OF BLDG. BEHIND WIRE LOTS) |
| 2799 | 1 | LOT, CONDUIT W/RACK |
| 2800 | 1 | LOT, ASSORTED WIRE W/SPOOLS, W/RACK ON WALL |
| 2801 | 1 | LOT, 1 ROW OF ELECTRICAL WIRE (3 PALLETS) |
| 2802 | 1 | LOT, 1 ROW OF GROUND WIRE (3 PALLETS) |
| 2803 | 1 | LOT, 2 ROWS OF ASSORTED SOLID CORE WIRE (6 PALLETS) |
| 2804 | 1 | LOT, (2) PALLETS OF ASSORTED WIRE |
| 2805 | 1 | SPOOL OF 3 STRAND 500 MCC COPPER TECH. CABLE |
| 2806 | 1 | ROW OF ASSORTED LIGHT FIXTURES |
| 2807 | 1 | LOT, ASSORTED LOOSE CONTENTS W/SHELF |
| 2808 | 1 | CM MANUAL CHAIN HOIST W/RAIL |
| 2809 | 1 | LOT, ANTIQUE WIRE CART W/INSULATORS |
| 2810 | 1 | LOT, ASSORTED ROLLING STOCK PARTS & MISC. TO END OF BLDG |
| 2811 | 1 | LOT, WIRE W/SPOOL STAND |
| 2812 | 1 | LOT, TIMBERS, LUMBER & POLES |
| 2813 | 1 | WEST. 400 AMP LOW VOLTAGE POWER CIRCUIT BREAKER |
| 2814 | 1 | AB 1336 ADJUSTABLE FREQUENCY MOTOR CONTROLLER |
| 2815 | 1 | LOT, RELIANCE VARI-SPEED ELECTRICS |
| 2816 | 1 | LOT, ASSORTED CAPACITORS |
| 2817 | 1 | LOT, ASSORTED MOTORS & REDUCERS ON SHELF |
| 2818 | 1 | LOT, (2) SM CYCLO 17:1 RATIO REDUCERS |
| 2819 | 1 | LOT, (2) SM CYCLO VARI-SPEED REDUCERS |
| 2820 | 1 | LOT, HYDRAULIC PUMPS & MISC. ON SHELF |
| 2821 | 1 | LOT, (2) STEEL FRAME SHELVES |
| 2822 | 1 | LOT, PVC PIPE ABOVE MOTORS |
| 2823 | 1 | LOT, LONG HANDLE SHOVELS & MISC. ABOVE MOTORS |
| 2824 | 1 | WEST 75HP/890RPM MOTOR |
| 2825 | 1 | NO DATA MOTOR |
| 2826 | 1 | EURODRIVE 12.12:1 REDUCER |
| 2827 | 1 | ARCHER SIZE 6X14 LOBE BLOWER |
| 2828 | 1 | LOT, (2) ASSORTED D/C DRIVE MOTORS |
| 2829 | 1 | G.E. 75HB MIG SET |
| 2830 | 1 | G.E. 75HB MIG SET |
| 2831 | 5 | ASSORTED GEARHEAD MOTORS |
| 2832 | 7 | ASSORTED GEARHEAD MOTORS |
| 2833 | 7 | ASSORTED GEARHEAD MOTORS |
| 2834 | 6 | ASSORTED GEARHEAD MOTORS |
| 2835 | 1 | 7-1/2HP W/DODGE 11.4:1 RATIO REDUCER |
| 2836 | 5 | ASSORTED GEARHEAD MOTORS, PUMPS |
| 2837 | 5 | ASSORTED GEARHEAD MOTORS, REDUCERS |
| 2838 | 4 | ASSORTED GEARHEAD MOTORS |
| 2839 | 3 | ASSORTED GEARHEAD MOTORS, REDUCERS |
| 2840 | 1 | LOT, ASSORTED GEARHEAD MOTORS, REDUCERS & STATORS |
| 2841 | 1 | LOT, CYCLE MANUAL CHAIN HOIST W/ALL TROLLEYS IN BLDG. (NO BEAM) |
| 2842 | 1 | LOT, ALL CONTENTS IN UPSTAIRS ELECTRICAL ROOM W/SHELVING (PLEASE PREVIEW - SOLD FROM DOWNSTAIRS) |
| 2843 | 1 | LOT, WOOD SHELVING ON SIDE OF MAINTENANCE BLDG. W/CONTENTS, BARRELS & BAGS OF SAW DUST |
| 2844 | 1 | CAT 235 LOGGING BOOM & GRAPPLE |
| 2845 | 1 | 33.5X33 TIRE |
| 2846 | 1 | 33.5X33 TIRE |
| 2847 | 1 | 37.5X39 TIRE |
| 2848 | 1 | 37.5X39 TIRE |
| 2849 | 1 | 37.5X39 TIRE |
| 2850 | 1 | 37.5X39 TIRE |
| 2851 | 1 | 37.5X39 TIRE |
| 2852 | 1 | LOT, (6) 20.5X25 TIRES |
| 2853 | 1 | LOT, STEEL PLATE |
| 2854 | 1 | LOT, WOOD SHELVES & SCRAP LUMBER |
| 2855 | 1 | PALLET TIRE RIMS |
| 2856 | 1 | PALLET TIRE RIMS |
| 2857 | 1 | PALLET TIRE RIMS |
| 2858 | 1 | PALLET TIRE RIMS |
| 2859 | 1 | PALLET TIRE RIMS |
| 2860 | 1 | PALLET RIM RINGS |
| 2861 | 1 | PALLET RIM RINGS |
| 2862 | 1 | PALLET RIM RINGS |
| 2863 | 1 | PALLET RIM RINGS |
| 2864 | 1 | PALLET RIM RINGS |
| 2865 | 1 | PALLET RIM RINGS |
| 2866 | 1 | 40HP BLOWER |
| 2867 | 1 | PALLET OF HYDRAULIC UNITS, MISC. |
| 2868 | 1 | LOT, ASSORTED TROUGHING ROLL PARTS |
| 2869 | 1 | LOT, ROW OF SPACE HEATERS (4 PALLETS) |
| 2870 | 1 | LOT, VALVE ASSEMBLY & FISCHER VALVES (2 PALLETS) |
| 2871 | 1 | LOT, H110 DRAG CHAIN SPROCKETS |
| 2872 | 1 | 10HP PUMP |
| 2873 | 1 | 6-1/2'X12" BELT CONVEYOR |
| 2874 | 1 | 10HP MOTOR W/HOLROYD 175:1 RATIO REDUCER, BRAKE |
| 2875 | 1 | WESTINGHOUSE 500KVA, 2400/4160 TO 208Y/120 VOLT, 3 PHASE TRANSFORMER |
| 2876 | 1 | LOT, DAMAGED TRANSFORMER, ROW OF ASSORTED MILL PARTS |
| 2877 | 1 | LOT, ROW OF ASSORTED MILL PARTS |
| 2878 | 1 | LOT, ROW OF ASSORTED MILL PARTS |
| 2879 | 1 | LOT, ROW OF ASSORTED MILL PARTS |
| 2880 | 1 | LOT, ROW OF ASSORTED MILL PARTS |
| 2881 | 1 | LOT, ROW OF PORTABLE STANDS |
| 2882 | 1 | LOT, HOT PRESS PLATENS |
| 2883 | 1 | 52" GLUE SPREADER |
| 2884 | 1 | LOT, RESERVOIR TANK W/METAL ENCLOSURE |
| 2885 | 1 | LOT, SHAKER SCREEN FRAMES |
| 2886 | 1 | 6"X20" T-SLOT TABLE |
| 2887 | 1 | LOT, PLASTIC CONTAINERS |
| 2888 | 1 | LOT, (5) METAL STORAGE CABINETS |
| 2889 | 1 | LOT, MISC. CONTENTS OF FENCED IN AREA (NO FILES) |
| 2890 | 1 | LOT, ASSORTED TABLES & STANDS |
| 2891 | 1 | LOT, VENEER SCANNING EQUIPMENT |
| 2892 | 1 | PANEL FEEDER |
| 2893 | 1 | PANEL FEEDER |
| 2894 | 1 | END EVENING ROLLCASE |
| 2895 | 1 | ROW OF MISC. |
| 2896 | 1 | ROW OF MISC. |
| 2897 | 1 | ROW OF FAN IMPELLERS |
| 2898 | 1 | LOT, (2) ASSORTED USED OIL TANKS, (1) FUEL TANK ON OUTSIDE MAIN MAINTENANCE BLDG. |
| 2899 | 1 | ROW OF MISC. |
| 2900 | 1 | ROW OF ASSORTED CARTS |
| 2901 | 1 | LOT, FIRE BRICK |
| 2902 | 1 | BOTTLE CART |
| 2903 | 1 | 30HP HYDRAULIC PUMP |
| 2904 | 1 | WEST 5HP/30RPM GEARHEAD MOTOR |
| 2905 | 1 | DIAPHGRAGM PUMP ASSEMBLY |
| 2906 | 1 | LOT, (4) ASSORTED PUMPS |
| 2907 | 1 | LOT, METAL WOOD SHELVING IN ROW W/BLUE CABINET W/CONTENTS |
| 2908 | 1 | STEEL TABLE W/(2) VISES |
| 2909 | 1 | STEEL TABLE |
| 2910 | 1 | LOT, 40' WOOD SHELF BEHIND STEEL TABLES W/ASSORTED PIPE FITTINGS |
| 2911 | 1 | LOT, SPACE HEATERS |
| 2912 | 1 | LOT, MATERIAL TURNING ROLLS, CUTTING TABLE & MISC. |
| 2913 | 1 | LOT, PART BINS |
| 2914 | 1 | LOT, NON FERROUS SCRAP |
| 2915 | 1 | LOT, LOOSE CONTENTS UPSTAIRS LANDING |
| 2916 | 1 | LOT, LOOSE CONTENTS OF ROOM |
| 2917 | 1 | LOT, LOOSE CONTENTS OF ROOM |
| 2918 | 1 | LOT, (4) MARKED CABINETS W/ASSORTED CONTENTS |
| 2919 | 1 | LOT, RED BIN SHELVING W/ASSORTED PIPE FITTINGS |
| 2920 | 1 | LOT, (2) WOOD FRAME TABLES W/(2) VISES |
| 2921 | 1 | LOT, ASSORTED TEST EQUIPMENT |
| 2922 | 1 | 1/6HP GAST PUMP |
| 2923 | 1 | 40' WOOD SHELVES W/ASSORTED PIPE FITTINGS & ASSORTED CONTENTS |
| 2924 | 1 | LOT, PIPE COUPLERS ON (3) PALLETS |
| 2925 | 1 | LOT, ORANGE CABINETS W/ASSORTED PIPE FITTINGS (2 LOCATIONS) |
| 2926 | 1 | LOT, ASSORTED PIPE W/RACK |
| 2927 | 1 | 3 PHASE SUMP PUMP |
| 2928 | 1 | RACK OUTSIDE BLDG. W/ASSORTED STEEL |
| 2929 | 1 | LOT, ASSORTED LADDERS |
| 2930 | 1 | LOT, CONDUIT & PLASTIC PIPE ON 1 SIDE OF RACK |
| 2931 | 1 | LOT, ASSORTED PIPE ON OTHER SIDE OF RACK |
| 2932 | 1 | STEEL RACK |
| 2933 | 1 | LOT, WOOD SHELVES |
| 2934 | 1 | LOT, ASSORTED PLASTIC PIPE |
| 2935 | 1 | LOT, ASSORTED STEEL PIPE |
| 2936 | 1 | LOT, ASSORTED CAST PIPE & STEEL PIPE |
| 2937 | 1 | LOT, PLASTIC BARRELS |
