| LOT# |
QTY. |
DESCRIPTION |
| 1X |
1 |
HYSTER H110XL 10,000 LB CAPACITY DUAL PNEUMATIC
TIRE FORKLIFT W/159" LIFT, OPEN VIEW MAST, SIDESHIFT, MONOTROL PEDAL, LPG FIRED
ENGINE GC05D039 |
| 2X |
1 |
WHITE MY50B 5,000 LB CAPACITY PNEUMATIC TIRE FORKLIFT
W/SIDESHIFT, LPG FIRED ENGINE 6400456 |
| 1 |
1 |
7.2 KW, 5300 RPM ARBOR MOTOR |
| 2 |
1 |
ANO 4712 INFRARED MOISTURE DETERMINATION BALANCE |
| 3 |
1 |
IMPULSE SEALER |
| 4 |
2 |
6" BUTTERFLY VALVES |
| 5 |
1 |
LOT, ASSORTED ROLLER CHAIN |
| 6 |
1 |
SOEHNLE SHIPPING SCALE |
| 7 |
1 |
LOT, 6" BELTING |
| 8 |
1 |
20 HP FAN |
| 9 |
1 |
PNEUMATECH A0250 REFRIGERATED AIR DRYER |
| 10 |
1 |
DUROFLOW ROTARY LOBE BLOWER |
| 11 |
1 |
DUROFLOW ROTARY LOBE BLOWER |
| 12 |
1 |
BALDOR 5 HP/1750 RPM, 3 PHASE MOTOR |
| 13 |
2 |
ELEKTRON SD 4N/NA VACUUM PUMPS |
| 14 |
1 |
GAST R2H302SHJ VACUUM PUMP |
| 15 |
1 |
GAST R2H302SHJ VACUUM PUMP |
| 16 |
1 |
FIRE EXTINGUISHER |
| 17 |
2 |
FIRE EXTINGUISHERS |
| 18 |
2 |
FIRE EXTINGUISHERS |
| 19 |
33 |
ASSORTED BEARINGS |
| 20 |
26 |
ASSORTED BEARINGS |
| 21 |
18 |
ASSORTED BEARINGS |
| 22 |
1 |
SHOP VAC (NEW) |
| 23 |
1 |
SHOP VAC |
| 24 |
1 |
LOT, (2) START OF SALE TABLES |
| 25 |
1 |
CYKLOP APM200A STRAPPING MACHINE W/AUTO TENSIONING
STRAPPING REEL |
| 26 |
1 |
CYKLOP APM200 STRAPPING MACHINE W/AUTO TENSIONING
STRAPPING REEL |
| 27 |
1 |
LOT, STRAPPER CONTROL PANEL W/STRAPPING |
| 28 |
1 |
T & S 4,000 LB HYDRAULIC SCISSOR LIFT W/PUMP,
& PENDANT CONTROL |
| 29 |
1 |
SCISSOR LIFT (NO PUMP) |
| 30 |
1 |
LOT, WHEELBARROWS |
| 31 |
1 |
APPROX. 38'X26" CLEATED, COVERED, TROUGHING ROLL
BELT CONVEYOR W/H&T DRUMS, STEEL BOLT TOGETHER TROUGH, BELT SWEEP & BELT GEARHEAD
DRIVE MOTORS |
| 32 |
1 |
28'X14" COVERED FLAT BELT CONVEYOR W/H&T DRUMS,
& STEEL TROUGH |
| 33 |
1 |
U.S. 5 HP/16:1 RATIO GEARHEAD MOTOR W/DRIVE CHAIN
(LOT 32 DRIVE) |
| 34 |
1 |
ELECTRIC BOX W/(2) ALLEN BRADLEY SIZE 2, 509 SERIES
STARTERS, BREAKERS |
| 35 |
1 |
GRECON PUMP SYSTEM W/3 HP PUMP, TANK, & ELECTRICAL
CONTROL PANEL |
| 36 |
1 |
12'X8'X12'HIGH ALL STEEL BOLT TOGETHER FIBER STORAGE
BIN W/ 6 AUGER CLEAN (2) GEARHEAD DRIVE MOTORS, MARKED ELECTRICS |
| 37 |
1 |
APPROX. 6' DIAMETER CYCLONE ON TOP OF FIBER BIN
W/CONNECTED BLOWPIPE, SUPPORTS TO GROUND |
| 38 |
1 |
MAC 15" ROTARY AIRLOCK FEEDER ON TOP OF FIBER
BIN W/2 HP GEARHEAD MOTOR |
| 39 |
1 |
APPROX. 65' CONVEYOR FROM FIBER BIN TO DRY MIX
LINE, W/2 STRANDS, CHAIN, 8"X18" FLITES, H&T DRUMS, STEEL TROUGH (NO DRIVE) |
| |
|
NOTE: LOTS 40 THRU 62 SOLD FROM GROUND LEVEL,
PLEASE PREVIEW |
| 40 |
1 |
SIEMENS 7 1/2 KW, 11 AMP MOTOR W/ HEMKLE 53.82:1
RATIO REDUCER, DRIVE CHAIN, (LOT 39 DRIVE) |
| 41 |
1 |
MAC 15" ROTARY AIR LOCK FEEDER W/ SEW EURODRIVE
2 HP/38.43:1 RATIO GEARHEAD MOTOR |
| 42 |
1 |
1993 ALLGAIER TYPE 600 X 1500, 24"X56" SINGLE
DECK VIBRATORY SCREEN |
| 43 |
1 |
7'X2 1/2 RECLAIM STORAGE BIN W/BIN LEVEL INDICATORS,
14' SINGLE AUGER CLEAN OUT, HEMKLE 46.31:1 RATIO GEARHEAD MOTOR |
| 44 |
1 |
1993 MAC 5YAV5C16 16 BAG DUST COLLECTION BAG HOUSE
W/PNEUMATIC PURGE BLOWER 3-AVSE-0 |
| 45 |
1 |
1993 MAC 54AVSC16 16 BAG DUST COLLECTION BAG HOUSE
W/PNEUMATIC PURGE BLOWER 93-AVSF- |
| 46 |
1 |
51"X69"X71"HIGH CEMENT STORAGE BIN W/13' TWIN
AUGER CLEAN OUT (NO DRIVE) |
| 47 |
1 |
51"X69"X71" 2 COMPARTMENT FLY ASH STORAGE BIN
W/BIN LEVEL INDICATORS, 12 1/2' TWIN AUGER CLEAN OUT (NO DRIVE) |
| 48 |
1 |
SEW EURODRIVE 5 HP, 28.77:1 RATIO GEARHEAD MOTOR
(LOT 47 DRIVE) |
| 49 |
1 |
HEMKLE 7 1/2 HP/64.54:1 RATIO GEARHEAD MOTOR (LOT
47 DRIVE) |
| 50 |
1 |
HEMKLE 5 HP/64.54:1 RATIO GEARHEAD MOTOR (LOT
46 DRIVE) |
| 51 |
1 |
LOT, (5) 287 LITER DRY CHEMICAL VESSELS W/STAND,
(10) BUTTERFLY VALVES |
| 52 |
1 |
1993 BISON 80"X40" DIAMETER ELECTRONIC CEMENT
SCALE SILO W/POWERED DISCHARGE BUTTERFLY VALVE |
| 53 |
1 |
1993 BISON 80"X40" DIAMETER ELECTRONIC FLY ASH
SCALE SILO W/POWERED DISCHARGE BUTTERFLY VALVE |
| 54 |
1 |
48"X24" DIAMETER ELECTRONIC WATER SOLUTION SCALE
SILO W/ POWERED DISCHARGE BUTTERFLY VALVE |
| 55 |
1 |
9'X52"X62" HIGH ELECTRONIC FIBER SCALE BIN W/13'-4
AUGER LIVE BOTTOM CLEAN OUT (NO DRIVES) |
| 56 |
1 |
NORD 3 KW, 4.95A/20.70:1 RATIO GEARHEAD MOTOR
(LOT 55 DRIVE) |
| 57 |
1 |
NORD 3 KW, 4.95A/20.70:1 RATIO GEARHEAD MOTOR
(LOT 55 DRIVE) |
| 58 |
1 |
ERICH D229 3,000 LITER DRY MIXER W/(3) APPROX.
50 HP MIXER MOTORS, MOTORIZED DISCHARGE GATE, MARKED ELECTRICS |
| 59 |
1 |
12 1/2'-4 AUGER CLEAN OUT UNDER MIXER W/STEEL
SLOPES (NO DRIVE MOTORS) |
| 60 |
1 |
SEW EURODRIVE 5.4 HP/12 RPM GEARHEAD MOTOR W/ELECTRICS
(LOT 59 DRIVE) |
| 61 |
1 |
SEW EURODRIVE 5.4 HP/12 RPM GEARHEAD MOTOR (LOT
59 DRIVE) |
| 62 |
1 |
6 STORY ALL STEEL DRY MIX AREA STRUCTURE W/STAIRWAYS,
RAILINGS, & DIAMOND PLATE DECKING |
| 63 |
1 |
WILKERSON COMPRESSED AIR DRYER W/PIPE TO UNIONS |
| |
|
NOTE: SALE MOVES OUTSIDE TO END OF BUILDING |
| 64 |
1 |
KOCKUMS 7'X7' 3 DECK MATERIAL SHAKER SCREEN W/DRIVE
MOTOR, & CANOPY |
| 65 |
1 |
APPROX. 42'X30" COVERED TROUGHING ROLL BELT CONVEYOR
FEEDING SCREEN (NO DRIVE) |
| 66 |
1 |
TOSHIBA 3 HP MOTOR W/SKK 11.29:1 RATIO REDUCER,
DRIVE CHAIN (LOT 65 DRIVE) |
| 67 |
1 |
8'X16'X6' HIGH LIVE BOTTOM HOPPER W/(3) AUGER
CLEAN OUT (NO DRIVES) |
| 68 |
1 |
HEMKLE 3 KW/4.95A/205.61:1 RATIO GEARHEAD MOTOR
(LOT 67 DRIVE) |
| 69 |
1 |
HEMKLE 3 KW/4.95A/205.61:1 RATIO GEARHEAD MOTOR
(LOT 67 DRIVE) |
| 70 |
1 |
HEMKLE 3 KW/4.95A/205.61:1 RATIO GEARHEAD MOTOR
(LOT 67 DRIVE) |
| 71 |
1 |
1994 10,000 GALLON STEEL, INSULATED SODIUM SILICATE
TANK W/VALVES, & DIAPHRAGM PUMP |
| 72 |
1 |
LOT, CYCLONE ON ROOF W/BLOWPIPE TO GROUND |
| 73 |
1 |
LOT, ELECTRIC BOXES ON WALL BETWEEN DOORWAY &
CORNER OF BUILDING |
| 74 |
1 |
42'X12' DIAMETER, 3540 CU. FT. ALL STEEL CEMENT
TYPE SILO W/ FUNNEL BOTTOM, NO ROTARY DISCHARGE AIR LOCK OR BAG HOUSE) |
| 75 |
1 |
1994 PEABODY TECTANK 42'X12' DIAMETER, 3540 CU.
FT. CEMENT TYPE SILO W/FUNNEL TYPE BOTTOM |
| 76 |
1 |
1994 PEABODY TECTANK 42'X12' DIAMETER, 3540 CU.
FT. CEMENT TYPE SILO (NO BAG HOUSE) |
| 77 |
1 |
1994 PEABODY TECTANK 42'X12' DIAMETER, 3540 CU.
FT. CEMENT TYPE SILO (NO BAG HOUSE) |
| 78 |
1 |
1994 PEABODY TECTANK 42'X12' DIAMETER, 3540 CU.
FT. CEMENT TYPE SILO W/FUNNEL TYPE BOTTOM |
| 79 |
1 |
MAC MD75 ROTARY FEED AIR LOCK W/ INJECTOR PIPE,
SEW EURODRIVE 2 HP/38.43:1 RATIO GEARHEAD MOTOR (UNDER LOT 74 SILO) |
| 80 |
1 |
MAC AVSCSPCL16 16 BAG DUST COLLECTION BAG HOUSE
W/PURGE FAN (ON TOP OF LOT 74 SILO) |
| 81 |
1 |
MAC 54AVSC16 16 BAG DUST COLLECTION BAG HOUSE
W/PURGE FAN (ON TOP OF LOT 76 SILO) |
| 82 |
1 |
MAC 54AVSC16 16 BAG DUST COLLECTION BAG HOUSE
W/PURGE FAN (ON TOP OF LOT 77 SILO) |
| 83 |
1 |
DURAFLOW 60 HP HIGH PRESSURE ROTARY LOBE BLOWER
W/(2) SILENCERS |
| 84 |
1 |
DURAFLOW 40 HP HIGH PRESSURE ROTARY LOBE BLOWER,
(2) SILENCERS, & PIPE TO SILO |
| 85 |
1 |
MAC 50RCV42 AIR PRESSURE VESSEL W/CYCLONE VALVES,
PIPE TO SILO & BUILDING |
| 86 |
1 |
MAC 50RCV42 AIR PRESSURE VESSEL W/CYCLONE VALVES,
PIPE TO SILO & BUILDING |
| 87 |
1 |
LOT, SILO AREA ELECTRIC & MONITORING BOXES |
| 88 |
1 |
DURAFLOW 75 HP HIGH PRESSURE ROTARY LOBE BLOWER
W/(2) SILENCERS |
| 89 |
1 |
LOT, 7 1/2'X16' OVERS COLLECTION BIN W/(2) BIN
COVERS EACH W/AUGER DISTRIBUTION CONVEYOR W/MOTORS & SHAFT MOUNT REDUCERS W/STEEL
FRAME WORK ABOVE BIN COVERS W/LIFT CYLINDERS, & ELECTRICS) |
| 90 |
1 |
36' ENCLOSED DISTRIBUTION CONVEYOR W/(2) STRANDS
3" PITCH CHAIN, 8"X14" FLITES (NO DRIVE) |
| 91 |
1 |
SEW EURODRIVE 10 HP/39 RPM GEARHEAD MOTOR W/ DRIVE
CHAIN (LOT 90 DRIVE) |
| 92 |
1 |
MAC LOT, 4 1/2' DIAMETER LONG NECK CYCLONE W/ROTARY
AIR LOCK FEEDER, CONNECTING BLOWPIPE |
|
|
NOTE: SALE MOVES TO KNIFE RING FLAKER AREA LOCATED
AROUND END OF BUILDING TO THE EAST |
| 93 |
1 |
10'X30" FIBER BIN W/STEEL SLOPES, 14'-2 AUGER
CLEAN OUT CONVEYOR (NO DRIVES) |
| 94 |
1 |
SEW EURODRIVE 7 1/2 HP/25 RPM GEARHEAD MOTOR (LOT
93 DRIVE) |
| 95 |
1 |
SEW EURODRIVE 7 1/2 HP/25 RPM GEARHEAD MOTOR (LOT
93 DRIVE) |
| 96 |
1 |
40'X24" COVERED, CLEATED, TROUGHING ROLL BELT
CONVEYOR W/UPRIGHTS TO GROUND (NO DRIVES) |
| 97 |
1 |
SEW EURODRIVE 5 HP/56 RPM GEARHEAD MOTOR W/ DRIVE
CHAIN (LOT 96 DRIVE) |
| 98 |
1 |
18"X60"-2 DECK VIBRATORY SCREEN W/MAGNETIC ROLL |
| 99 |
1 |
1995 KLOCKNER KHZ 12 RING KNIFE FLAKER W/DRIVE
BELTS |
| 100 |
1 |
TOSHIBA 200 HP/1188 RPM/480 VOLT FLAKER DRIVE
MOTOR |
| 101 |
1 |
LOT, FLAKER PARTS ON GROUND |
| 102 |
1 |
FLAKER AREA CONTROL PANEL W/ ALLEN BRADLEY PLC
5/2 PROGRAMMABLE CONTROLLER |
| 103 |
1 |
ALLEN BRADLEY 200 HP, SMC PLUS MOTOR STARTER |
| 104 |
1 |
ALLEN BRADLEY 4 SECTION 28 STATION MOTOR CONTROL
CENTER W/SMC & ADJUSTABLE FREQUENCY STARTS |
| 105 |
1 |
LOT, PUSH BUTTON START/STOP BUTTONS |
| 106 |
1 |
CHEMTRONICS MICRO 1-EV FIRE SYSTEM CONTROL PANEL
W/ PIPING & SENSORS THROUGHOUT FLAKER LINE |
| 107 |
1 |
15'X22' WELDED STEEL FRAME, GALV. COVERED FLAKER
BUILDING W/LIGHTS, AIR CONDITIONER, ROLL UP DOOR, STEEL SUB-STRUCTURE W/STAIRWAY |
| 108 |
1 |
APPROX. 48' FLAKER CLEAN OUT CONVEYOR W/ENCLOSED
TROUGH, 3" PITCH CHAIN W/8"X15" FLITES (NO DRIVES) |
| 109 |
1 |
SEW EURODRIVE 10 HP/39 RPM GEARHEAD MOTOR W/ DRIVE
CHAIN |
| 110 |
1 |
40" DIAMETER LONG NECK CYCLONE W/CONNECTED BLOWPIPE,
STEEL STRUCTURE TO GROUND |
| 111 |
1 |
18" ROTARY AIR LOCK FEEDER W/ U.S. 1 1/2 HP GEARHEAD
MOTOR |
| 112 |
1 |
30" FAN W/TOSHIBA 20 HP/1770 RPM MOTOR |
| 114 |
1 |
BISON TYPE 45X17 FIBER AUGER W/40 HP DRIVE MOTOR |
| 115 |
1 |
EXPANDED METAL PLATFORM UNDER LOT 114 |
| 116 |
1 |
APPROX. 50' ENCLOSED LOAD OUT CONVEYOR W/(2) STRANDS
ROLLER CHAIN, 8"X15" FLITES, SPARE TROUGH SECTION, DISCHARGE CHUTE, STAND FOR
DISCHARGE CHUTE (NO DRIVE) |
| 117 |
1 |
SEW EURODRIVE 10 HP/39 RPM GEARHEAD MOTOR W/ DRIVE
CHAIN (LOT 116 DRIVE) |
| |
|
NOTE: SALE MOVES BACK INSIDE MAIN BUILDING |
| 118 |
1 |
CAUL PLATE OVER LAPPING STATION W/INFEED WHEELS,
12'-3 STRAND, 6" BELT POP UP TRANSFER, RECEIVER TANK, RELIANCE 5 HP D.C. MOTOR,
53.63:1 RATIO REDUCER, & ELECTRICS |
| 119 |
1 |
PARTING OIL CAUL PLATE SPRAYER W/OUTFEED HOLD
DOWN ROLLS, PARTING OIL PROP TANK W/PUMP, PIPING, & ELECTRICS |
| 120 |
1 |
BISON TYPE VD-B2 120 FORMER W/FINES AIR SEPARATION
SYSTEM, STORAGE BELT W/LOAD CELL SCALE, DOSING BELT, MAT LEVELING RACKERS, SPIKE
WHEELS, & DRIVE MOTORS |
| 121 |
1 |
BISON TYPE VD-B2 120 FORMER W/STORAGE BELT W/
LOAD CELL SCALE, DOSING BELT, MAT LEVELING RACKERS, SPIKE WHEELS, DRIVE MOTOR |
| 122 |
1 |
BISON TYPE VD-B2 120 FORMER W/FINES AIR SEPARATION
SYSTEM, STORAGE BELT W/LOAD CELL SCALE, DOSING BELT, MAT LEVELING RACKERS, SPIKE
WHEELS, & DRIVE MOTORS |
| 123 |
1 |
145'X25" TROUGHING ROLL BELT CONVEYOR FEEDING
FORMING LINE FROM DRY MIX LINE W/(3) MOTORIZED PIVETING ARMS H&T ROLLS, BOLT TOGETHER
STEEL FRAME, ALL STEEL SUB-STRUCTURE W/CATWALKS & LADDERS (NO BELT OR DRIVE MOTOR) |
| 124 |
1 |
NORD 5.5 KW/28.85:1 RATIO GEARHEAD MOTOR W/DRIVE
CHAIN (LOT 123 BELT DRIVE) |
| 125 |
1 |
APPROX. 13'X31" OVERHEAD FLAT BELT CONVEYOR FEEDING
LOT 120 FORMER W/WHEEL MOUNTED FRAME, HEMKLE 2.2 KW/21.38:1 RATIO BELT DRIVE GEARHEAD,
HEMKLE 1.5 KW/29.96:1 RATIO BELT POSITIONING GEARHEAD MOTOR |
| 126 |
1 |
APPROX. 22'X31" OVERHEAD FLAT BELT CONVEYOR FEEDING
LOT 121 FORMER W/WHEEL MOUNTED FRAME, HEMKLE BELT DRIVE GEARHEAD, HEMKLE 1.5 KW/29.96:1
RATIO BELT POSITIONING GEARHEAD MOTOR |
| 127 |
1 |
APPROX. 13'X31" OVERHEAD FLAT BELT CONVEYOR FEEDING
LOT 122 FORMER W/WHEEL MOUNTED FRAME, HEMKLE 2.2 KW/21.38:1 RATIO BELT DRIVE GEARHEAD,
HEMKLE 1.5 KW/29.96:1 RATIO BELT POSITIONING GEARHEAD MOTOR |
| 128 |
1 |
MAT LEVELING BRUSH STATION W/(2) TOP LEVELING
BRUSHES, (2) SIDE LEVELING BRUSHES, & (4) ASSORTED GEARHEAD MOTORS |
| 129 |
1 |
8'LONG X 110"WIDE OVERS BELT CONVEYOR W/H&T DRUMS,
STEEL FRAME & 3.7 KW GEARHEAD MOTOR |
| 130 |
1 |
42'X22" OVERS TROUGHING ROLL BELT CONVEYOR W/H&T
ROLLS, STEEL FRAME, & BRUSH SWEEP (NO DRIVES) |
| 131A |
1 |
HEMKLE 2.2 KW/26.57:1 RATIO GEARHEAD MOTOR (LOT
130 BELT DRIVE) |
| 131B |
1 |
SEW EURODRIVE 5 HP/677 RPM GEARHEAD MOTOR (LOT
130 SWEEP DRIVE) |
| 132 |
1 |
104'X48" CAUL PLATE BELT TRANSFER W/H&T DRUMS,
STEEL FRAME, & MOTORIZED BELT SWEEP (NO SIDE BELTS) |
| 133 |
1 |
RELIANCE APPROX. 50 HP D.C. MOTOR W/ DODGE 105.9:1
RATIO REDUCER, & DRIVE CHAIN (LOT 132 DRIVE) |
| 134 |
1 |
APPROX. 65'X25" OVERS TROUGHING ROLL BELT CONVEYOR
W/H&T ROLLS, & BOLT TOGETHER STEEL FRAME |
| 135 |
1 |
HEMKLE GEARHEAD MOTOR (LOT 134 DRIVE) |
| 136 |
1 |
11'-SCREW AUGER CONVEYOR W/ HEMKLE 3 KW/12.05:1
RATIO GEARHEAD |
| 137 |
1 |
30' TROUGHING ROLL BELT CONVEYOR FRAME W/H&T ROLLS,
& STEEL FRAME |
| 138 |
1 |
HEMKLE 2.2 KW/58.27:1 RATIO GEARHEAD MOTOR (LOT
137 DRIVE) |
| 139 |
1 |
14'-2 SECTION CAUL PLATE BELT TRANSFER W/3 STRANDS
6" BOLTS, H&T ROLLS, & STEEL FRAME (NO DRIVES) |
| 140 |
1 |
RELIANCE 7 1/2 HP D.C. MOTOR W/HEMKLE 17.92:1
RATIO GEARHEAD MOTOR (LOT 139 DRIVE) |
| 141 |
1 |
RELIANCE 7 1/2 HP D.C. MOTOR W/HEMKLE 17.92:1
RATIO GEARHEAD MOTOR (LOT 139 DRIVE) |
| 142 |
1 |
WEIGHT & REJECT STATION W/16' -2 STRAND 6" BELT
CAUL PLATE WEIGHT SCALE, (2) LEVELING BRUSH ASSEMBLYS, (2) RECYCLED AUGERS, OUTFEED
REJECT CROSS TRANSFER W/PNEUMATIC DUMPING TRANSFER, (9) ASSORTED GEARHEAD MOTORS,
& ELECTRICS |
| 143 |
1 |
CAUL PLATE PRE-STACKER STATION W/12'X40" FEED
THRU BELT CONVEYOR, CAUL PLATE STACKING ARMS W/STACKING ARM DRIVE, CONTROLS, &
ELECTRICS (NO BELT DRIVE) |
| 144 |
1 |
SEW EURODRIVE 3 HP/50.62:1 RATIO GEARHEAD MOTOR
(LOT 143 BELT DRIVE) |
| 145 |
1 |
PATHEX HYDRAULIC SINGLE OPERATING PRE-PRESS W/60"X134"
PLATEN, 5'X13" FEED THRU BELT CONVEYOR W/DRIVE, 15 HP HYDRAULIC SUPPORT UNIT W/PUMP.
2,000MM PLATEN STROKE, 3,800MM PLATEN OPENING, 900 N/EM2 SPEC PRESSURE |
| 146 |
1 |
BISON ROTATING CAUL PLATE TRANSFER W/(2) DEMAG
CLAMP TIGHTENING GEARHEAD MOTORS, (1) DEMAG ROTATION GEARHEAD DRIVE MOTOR, ELECTRICAL
CONTROL PANEL |
| 147 |
1 |
13'-3 STRAND 6" BELT CAUL PLATE TRANSFER W/H&T
ROLLS, SIDE ROLLS W/SIDE ROLL GEARHEAD, STEEL FRAME, (NO 6" BELT DRIVE) |
| 148 |
1 |
SBS 3 KW/38.6:1 RATIO GEARHEAD MOTOR (LOT 147-6"
BELT DRIVE) |
| 149 |
1 |
28'-2 SECTION CAUL PLATE CARRIER ROLLCASE W/44
1/2" ROLLS (NO DRIVE) |
| 150 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 149 DRIVE) |
| 151 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 149 DRIVE) |
| 152 |
1 |
BISON 2,600 TON, 4 RAM HYDRAULIC SINGLE OPENING
PRESS W/86"X9' PLATEN, FEED THRU BELT CONVEYOR, 100 HP HYDRAULIC UNIT, CONTROL
PANEL, 1,000PSI FORCE ACROSS PLATEN |
| 153 |
1 |
LOT, CAUL PLATE CARRIERS: 27 TOP & BOTTOM CARRIER
PARTS IN HARDING CHAMBER, (1) TOP & BOTTOM CARRIER PARTS IN PRESS, (3) BOTTOM
CARRIER PARTS ON RECYCLE ROLLCASES |
| 154 |
1 |
11 1/2' CARRIER TRANSFER ROLLCASE W/44 1/2" ROLLS,
POWER TRAVEL, (2) ASSORTED GEARHEAD MOTORS (NO RAIL) |
| 155 |
1 |
11 1/2' CARRIER TRANSFER ROLLCASE W/44 1/2" ROLLS,
POWER TRAVEL, (2) ASSORTED GEARHEAD MOTORS (NO RAIL-SOLD FROM PRESS INFEED SIDE) |
| 156 |
1 |
16 1/2' CAUL PLATE CARRIER ROLLCASE W/44 1/2"
ROLLS (NO DRIVE) |
| 157 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 156 DRIVE) |
| 158 |
1 |
G.E. 2,000 KVA, 12,000 TO 480Y/277 VOLT 3 PHASE
TRANSFORMER |
| 159 |
1 |
SQUARE D 2,500 AMP RATED 480 VOLT SWITCHBOARD
W/2,500 AMP MAIN, 10 ASSORTED BREAKERS |
| 160 |
1 |
WESTINGHOUSE 1,500 KVA, 12,000 TO 480Y/277 VOLT
3 PHASE TRANSFORMER |
| 161 |
1 |
RSE-SIERRA 2,000 AMP RATED 480 VOLT SWITCHBOARD
W/2,000 AMP MAIN, 11 ASSORTED BREAKERS |
| 162 |
1 |
ALLEN BRADLEY 7 SECTION 62 STATION MOTOR CONTROL
CENTER W/SMART MOTOR CONTROL STARTERS W/BREAKERS |
| 163 |
1 |
ALLEN BRADLEY SIZE 5 REDUCED VOLTAGE STARTER |
| 164 |
1 |
ALLEN BRADLEY 2 SECTION 16 STATION MOTOR CONTROL
CENTER W/SMART MOTOR CONTROL STARTERS W/BREAKERS |
| 165 |
1 |
RELIANCE VARIABLE SPEED D.C. MOTOR CONTROL CABINET
W/10 ASSORTED STARTERS |
| 166 |
1 |
FPT 20 KVA, 460 TO 230 Y/139 VOLT 3 PHASE TRANSFORMER |
| 167 |
1 |
FPT 15 KVA, 240 X 480 TO 120/240 VOLT 1 PHASE
TRANSFORMER |
| 168 |
1 |
FPT 15 KVA, 240 X 480 TO 120/240 VOLT 1 PHASE
TRANSFORMER |
| 169 |
1 |
ACME 10 KVA, 240 X 480 TO 120/240 VOLT 1 PHASE
TRANSFORMER |
| 170 |
1 |
ACME 5 KVA, 240 X 480 TO 120/240 VOLT 1 PHASE
TRANSFORMER |
| 171 |
1 |
ACME 5 KVA, 240 X 480 TO 120/240 VOLT 1 PHASE
TRANSFORMER |
| 172 |
4 |
ACME 5 KVA, 240 X 480 TO 120/240 VOLT 1 PHASE
TRANSFORMER |
| 173 |
1 |
SEW EURODRIVE 15 HP ADJUSTABLE FREQUENCY AC MOTOR
CONTROLLER |
| 174 |
1 |
ALLEN BRADLEY 1336 15 AMP ADJUSTABLE FREQUENCY
AC MOTOR CONTROLLER |
| 175 |
1 |
GRASEBY GC9000 ADJUSTABLE FREQUENCY MOTOR CONTROLLER |
| 176 |
1 |
12 DOOR ELECTRICAL CABINET W/ ALLEN BRADLEY 5/03
CPU & REMOTE 1/0 ADAPTOR RACKS |
| 177 |
1 |
ALLEN BRADLEY 4 SECTION, 18 STATION MOTOR CONTROL
CENTER W/SMART MOTOR CONTROL STARTERS W/BREAKERS |
| 178 |
1 |
ALLEN BRADLEY 8 SECTION, 93 STATION MOTOR CONTROL
CENTER W/SMART MOTOR CONTROL STARTERS W/BREAKERS |
| 179 |
1 |
ALLEN BRADLEY 4 SECTION, 10 STATION MOTOR CONTROL
CENTER W/520E SERIES STARTERS, BREAKERS |
| 180 |
1 |
QUINCY OSB50ANA312 50 HP ROTARY SCREW AIR COMPRESSOR
97058 |
| 181 |
1 |
QUINCY 30 HP ROTARY SCREW AIR COMPRESSOR |
| 182 |
1 |
AIR RECEIVER TANK W/PIPE TO UNION |
| 183 |
1 |
LOT, SHIPPING DESK, TABLE, & MISC. |
| 184 |
1 |
1994 AMERICAN 30'X120' HOT OIL HEATED HARDING
CHAMBER W/12 CIRCULATION FANS, & ELECTRICS (NO CONTENTS) |
| 185 |
1 |
LOT, (9) 11'4" CAUL PLATE CARRIER ROLLCASES IN
#1 INFEED SECTION OF HARDING CHAMBER W/ 44 1/2" CHAIN DRIVEN ROLLS (NO DRIVE MOTORS) |
| 186 |
1 |
LOT, (9) 11'4" CAUL PLATE CARRIER ROLLCASES IN
#2 INFEED SECTION OF HARDING CHAMBER W/ 44 1/2" CHAIN DRIVEN ROLLS (NO DRIVE MOTORS) |
| 187 |
1 |
LOT, (9) 11'4" CAUL PLATE CARRIER ROLLCASES IN
OUTFEED SECTION OF HARDING CHAMBER W/ 44 1/2" CHAIN DRIVEN ROLLS (NO DRIVE MOTORS) |
| 188 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#1 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 189 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#2 ROLLCASE DRIVE IN FIRST INFEED SECTION OF HARDING CHAMBER) |
| 190 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#3 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 191 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#4 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 192 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#5 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 193 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#6 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 194 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#7 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 195 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#8 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 196 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#9 ROLLCASE DRIVE IN FIRST INFEED SECTION) |
| 197 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#1 ROLLCASE DRIVE IN SECOND INFEED SECTION OF HARDING CHAMBER) |
| 198 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#2 ROLLCASE DRIVE IN SECOND INFEED SECTION OF HARDING CHAMBER) |
| 199 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#3 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 200 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#4 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 201 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#5 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 202 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#6 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 203 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#7 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 204 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#8 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 205 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#9 ROLLCASE DRIVE IN SECOND INFEED SECTION) |
| 206 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#1 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 207 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#2 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 208 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#3 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 209 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#4 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 210 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#5 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 211 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#6 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 212 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#7 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 213 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#8 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 214 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR (#9 ROLLCASE DRIVE IN OUTFEED SECTION OF HARDING CHAMBER) |
| 215 |
1 |
11 1/2' CARRIER TRANSFER ROLLCASE W/44 1/2" ROLLS
POWER TRAVEL (2) ASSORTED GEARHEAD MOTORS (NO RAIL, LOCATED IN BACK OF HARDING
CHAMBER -LOOKS LIKE LOT 154) |
| 216 |
1 |
56'-4 SECTION CAUL PLATE CARRIER ROLLCASE W/44
1/2" CHAIN DRIVEN ROLLS (NO LAST SECTION-NO DRIVE MOTORS) |
| 217 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 216 FIRST SECTION DRIVE) |
| 218 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 216 SECOND SECTION DRIVE) |
| 219 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 216 THIRD SECTION DRIVE) |
| 220 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR (LOT 216 THIRD SECTION DRIVE) |
| 221 |
1 |
26'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS, STEEL
FRAME (NO DRIVE) |
| 222 |
1 |
26'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS, STEEL
FRAME (NO DRIVE) |
| 223 |
1 |
SEW EURODRIVE 1 1/2 HP VARIABLE SPEED GEARHEAD
MOTOR |
| 224 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 221 DRIVE) |
| 225 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 222 DRIVE) |
| 226 |
1 |
1994 SCHWABEDISSEN DA 79/S DOUBLE END TRIM SAW
FRAME W/ VARIABLE SPEED FEED THRU CHAIN (NO ARBOR MOTORS) |
| 227 |
1 |
CARRIAGE TYPE VACUUM STACKER W/10 CUPS IN 40"X9"
RECTANGULAR PATTERN W/1.6 KW VACUUM PUMP, POWER TRAVEL & POWER LIFT GEARHEAD MOTORS,
& ELECTRICS |
| 228 |
1 |
17'X60" TRIM SAW OUTFEED BELT DRIVEN ROLLCASE
(NO DRIVE) |
| 229 |
1 |
SEW EURODRIVE 1 1/2 HP VARIABLE SPEED GEARHEAD
MOTOR (LOT 228 DRIVE) |
| 230 |
1 |
14'-2 STRAND ROLLER CHAIN OUTFEED TRANSFER FROM
STACKER W/CYLINDERS, SWITCHES, NORD 104.4:1 RATIO GEARHEAD MOTOR |
| 231 |
1 |
15'X55" CHAIN DRIVEN PALLET ROLLCASE BEHIND STACKER
(SECTION 1-NO DRIVE) |
| 232 |
1 |
15'X55" CHAIN DRIVEN PALLET ROLLCASE BEHIND STACKER
(SECTION 2-NO DRIVE) |
| 233 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 231 DRIVE) |
| 234 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 232 DRIVE) |
| 235 |
1 |
LOT, ALL CAUL PLATES ON OUTSIDE OF HARDING CHAMBER |
| 236 |
1 |
LOT, ALL CAUL PLATES ON INSIDE OF HARDING CHAMBER |
| 237 |
1 |
SELF-DUMP DUMPSTER (OUTSIDE) |
| 238 |
1 |
SELF-DUMP DUMPSTER |
| 239 |
1 |
SELF-DUMP DUMPSTER |
| 240 |
1 |
SELF-DUMP DUMPSTER |
| 241 |
1 |
LOT, ASSORTED MILL PARTS |
| 242 |
1 |
1994 KONUS ENERGY SYSTEMS KV 1/25 NATURAL GAS
FIRED, OIL HEATING PACKAGE BOILER. 150 PSIG MAX. OPERATING PRESSURE, 554 DEGREES
FAHRENHEIT MAX. OPERATING TEMP. 4 MM BTU/HR. 432 SQ FT HEATING SURFACE, 352 GPM
NOMINAL FLOW RATE, 25 HP FAN |
| 243 |
1 |
OIL TANK W/PUMP |
| 244 |
1 |
OIL TANK W/STAND |
| 245 |
1 |
LOT, BOILER ROOM ELECTRIC BOXES ON WALL |
| 246 |
1 |
20'X21'X20' ALL STEEL BOLT TOGETHER BOILER BUILDING
W/ROLL UP DOOR |
| 247 |
1 |
LOT, INSULATED STEEL OIL PIPE FROM BOILER TO HARDING
CHAMBER & THROUGHOUT BUILDING |
| 248 |
1 |
BISON CARRIAGE TYPE VACUUM BOARD UNSTACKER ON
INFEED TO DRYER LINE W/10 CUPS IN 40"X9' RECTANGULAR PATTERN, 1-6 KW VACUUM PUMP,
BOARD LIFT & CARRIAGE GEARHEAD DRIVE MOTORS |
| 249 |
1 |
11 1/2'X52" CHAIN DRIVEN ROLLCASE (NO DRIVE) |
| 250 |
1 |
11 1/2'X52" CHAIN DRIVEN ROLLCASE (NO DRIVE) |
| 251 |
1 |
11 1/2'X52" CHAIN DRIVEN ROLLCASE (NO DRIVE) |
| 252 |
1 |
11 1/2'X52" CHAIN DRIVEN ROLLCASE (NO DRIVE) |
| 253 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 249 DRIVE) |
| 254 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 250 DRIVE) |
| 255 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 251 DRIVE) |
| 256 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 252 DRIVE) |
| 257 |
1 |
17'X60" BELT DRIVEN ROLLCASE W/STAND |
| 258 |
1 |
13 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME (NO DRIVE) |
| 259 |
1 |
13 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME (NO DRIVE) |
| 260 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 258 DRIVE) |
| 261 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 259 DRIVE) |
| 262 |
1 |
12 1/2' BOARD ROLLOVER ROLLCASE W/ROLLOVER & ROLLCASE
GEARHEAD MOTORS |
| 263 |
1 |
13 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME (NO DRIVE) |
| 264 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 263 DRIVE) |
| 265 |
1 |
13'X47" PNEUMATIC POP-UP BELT DRIVEN ROLLCASE
W/CYLINDERS, FIRST HORIZONTAL BEAM UNDER ROLLCASE (NO DRIVE) |
| 266 |
1 |
NORD 55.28:1 RATIO GEARHEAD MOTOR (LOT 265 DRIVE) |
| 267 |
1 |
18 1/2'-4 STRAND, 3 1/2" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME (NO DRIVE) |
| 268 |
1 |
NORD 55.28:1 RATIO GEARHEAD MOTOR (LOT 267 DRIVE) |
| 269 |
1 |
LOT, 10'-4 STRAND, 3 1/2" BELT TRANSFER W/13'X102"
POP-UP ROLLCASE ON DRYER INFEED W/(2) ASSORTED GEARHEAD MOTORS |
| 270 |
1 |
1989 DORNIER 8 TRAY 17 SECTION NATURAL GAS HEATED,
ZONE CONTROLLED DRYER W/(5) 20 HP BURNER FANS, (4) 7 1/2 HP CIRCULATION FANS,
SCHENCK ELECTRICS, ECLIPSE BURNERS, CATWALK & STAIRWAY, ALLEN BRADLEY PANELVIEW |
| 271 |
1 |
8 TRAY DRIVE DRYER LOADER W/ (8) DEMAG .44 KW
GEARHEAD MOTORS, & MARKED ELECTRICS |
| 272 |
1 |
DRYER LOAD ELEVATOR W/(2) DRUM WINCHES W/DEMAG
GEARHEAD, UNLOADING ROLLS W/GEARHEAD, & MARKED ELECTRICS |
| 273 |
1 |
8 TRAY UNLOADER W/(8) DEMAG .44 KW GEARHEAD MOTORS,
& MARKED ELECTRICS |
| 274 |
1 |
DRYER UNLOAD ELEVATOR W/(2) DRUM WINCHES W/GEARHEAD,
UNLOADING ROLLS W/GEARHEAD, & MARKED ELECTRICS |
| 275 |
1 |
2 STATION CARRIAGE TYPE VACUUM STACKER W/10 CUP
PER STATION IN 40"X9' RECTANGULAR PATTERN, 5 HP CARRIAGE LIFT & TRANSFER GEARHEADS,
& 2 HP VACUUM PUMP |
| 276 |
1 |
13'X9' DOUBLE WIDE DRYER OUTFEED ROLLCASE W/PRODUCT
CENTERING CYLINDERS, & (2) NORD GEARHEAD MOTORS |
| 277 |
1 |
12' SECTION OF DOUBLE WIDE 55" ROLLCASE ON STACKER
OUTFEED W/COMMON CENTER BEAM (NO DRIVES) |
| 278 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 277 DRIVES) |
| 279 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 277 DRIVES) |
| 280 |
1 |
12' SECTION OF DOUBLE WIDE 55" ROLLCASE W/COMMON
CENTER BEAM (NO DRIVES) |
| 281 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 280 DRIVE) |
| 282 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 280 DRIVE) |
| 283 |
1 |
12' SECTION OF DOUBLE WIDE 55" ROLLCASE W/COMMON
CENTER BEAM (NO DRIVES) |
| 284 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 283 DRIVE) |
| 285 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 283 DRIVE) |
| 286 |
1 |
12' SECTION OF DOUBLE WIDE 55" ROLLCASE W/COMMON
CENTER BEAM (NO DRIVES) |
| 287 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 286 DRIVE) |
| 288 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 286 DRIVE) |
| 289 |
1 |
12'X55" ROLLCASE (NO DRIVE) |
| 290 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR
(LOT 289 DRIVE) |
| 291 |
1 |
DIEHL 5" CAPACITY STRAIGHT LINE RIP SAW W/15 HP
ARBOR MOTOR |
| 292 |
1 |
LOT, BLOWPIPE FROM BATHROOM AREA TO DRY MIX AREA |
| 293 |
1 |
METAL SHELF IN ELECTRICAL ROOM |
| 294 |
1 |
9 DOOR ELECTRICAL CABINET W/ ALLEN BRADLEY REMOTE
1/0 ADAPTOR RACKS |
| 295 |
1 |
ALLEN BRADLEY CENTERLINE 9 SECTION 29 STATION
MOTOR CONTROL CENTER W/520E SERIES, SMC SERIES, & ADJUSTABLE FREQUENCY STARTERS |
| 296 |
1 |
SPRECHER SOFT START STARTER |
| 297 |
1 |
SPRECHER SOFT START STARTER |
| 298 |
1 |
SPRECHER SOFT START STARTER |
| 299 |
1 |
SPRECHER SOFT START STARTER |
| 300 |
1 |
EUROTHERM 5845 15 HP STARTER |
| 301 |
1 |
2 DOOR ELECTRICAL CABINET W/ ALLEN BRADLEY SMC
STARTERS, & ADJUSTABLE TRIP BREAKERS |
| 302 |
1 |
2 DOOR ELECTRICAL CABINET W/ ALLEN BRADLEY SMC
STARTERS, & ADJUSTABLE TRIP BREAKERS |
| 303 |
1 |
ALLEN BRADLEY CENTERLINE 10 SECTION 39 STATION
MOTOR CONTROL CENTER W/520E SERIES, SMC SERIES, & ADJUSTABLE FREQUENCY STARTERS |
| 304 |
1 |
SIEMENS 18 SECTION 180 STATION DOUBLE SIDED MOTOR
CONTROL CENTER |
| 305 |
1 |
7 DOOR ELECTRICAL CABINET W/ VERITON STARTER,
& MISC. ELECTRICAL (ROW) |
| 306 |
1 |
8 DOOR ELECTRICAL CABINET W/ WIRING RACKS |
| 307 |
1 |
ALLEN BRADLEY CENTERLINE 6 SECTION 48 STATION
MOTOR CONTROL CENTER W/SMC STARTERS, & ADJUSTABLE TRIP BREAKERS |
| 308 |
1 |
ALLEN BRADLEY CENTERLINE 3 SECTION 23 STATION
MOTOR CONTROL CENTER W/SMC STARTERS, & ADJUSTABLE TRIP BREAKERS |
| 309 |
1 |
ALLEN BRADLEY 350 HP SMC REDUCED VOLTAGE STARTER |
| 310 |
1 |
INFEED TO PAINT LINE W/(1) 1/2 HP ROLL GEARHEAD,
(2) 1 HP/15:1 RATIO CHAIN TRANSFER GEARHEADS |
| 311 |
1 |
INFRATROL PAINT LINE GAS FIRE PREHEAT OVEN |
| 312 |
1 |
PAINT LINE DIP TANK W/FAN BETWEEN LINE & DRYER |
| 313 |
1 |
INFRATROL PAINT LINE HOT OIL HEATED DRYING OVEN |
| 314 |
1 |
INFRATROL PAINT LINE INFRARED DRYING OVEN |
| 315 |
1 |
INFRATROL PAINT LINE HOT OIL HEATED DRYING OVEN |
| 316 |
1 |
INFRATROL PAINT LINE INFRARED DRYING OVEN |
| 317 |
1 |
INFRATROL PAINT LINE COOLING TUNNEL W/ FANS |
| 318 |
1 |
INFRATROL PAINT LINE COOLING TUNNEL |
| 319 |
1 |
INFRATROL PAINT LINE COOLING TUNNEL W/ FANS |
| 320 |
1 |
INFRATROL PAINT LINE COOLING TUNNEL W/ FANS |
| 321 |
1 |
INFRATROL PAINT LINE COOLING TUNNEL W/ FANS |
| 322 |
1 |
INFRATROL PAINT LINE COOLING TUNNEL W/ FANS |
| 323 |
1 |
LOT, PAINT LINE CHAIN |
| 324 |
1 |
PAINT LINE ELECTRICAL CONTROL PANEL |
| 325 |
1 |
PAINT LINE ELECTRICAL CONTROL PANEL |
| 326 |
1 |
PAINT LINE ELECTRICAL CONTROL PANEL |
| 327 |
1 |
PAINT LINE ELECTRICAL CONTROL PANEL |
| 328 |
1 |
PAINT LINE ELECTRICAL CONTROL PANEL |
| 329 |
1 |
TOSHIBA 250 HP/1780 RPM MOTOR |
| 330 |
1 |
TOSHIBA 200 HP/1180 RPM MOTOR |
| 331 |
1 |
SEW EURODRIVE 1 1/2 HP/32.12:1 RATIO GEARHEAD
MOTOR |
| 332 |
1 |
SEW EURODRIVE 7 HP/62.18:1 RATIO GEARHEAD MOTOR |
| 333 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR |
| 334 |
1 |
NORD 2 HP/433:1 RATIO GEARHEAD MOTOR |
| 335 |
1 |
NORD 5 HP/205:1 RATIO GEARHEAD MOTOR |
| 336 |
1 |
NORD 116.45:1 RATIO REDUCER |
| 337 |
1 |
STOBER 5 1/2 HP GEARHEAD MOTOR |
| 338 |
1 |
SEW EURODRIVE 6 HP/17.15:1 RATIO GEARHEAD MOTOR |
| 339 |
1 |
REDUCER |
| 340 |
1 |
NORD 53.82:1 RATIO REDUCER |
| 341 |
1 |
SEW EURODRIVE 1 1/2 HP/37.55:1 RATIO VARIABLE
SPEED MOTOR |
| 342 |
1 |
NORD 5 HP/4.82:1 RATIO GEARHEAD MOTOR |
| 343 |
1 |
NORD 2.2 KW/21.38:1 RATIO GEARHEAD MOTOR |
| 344 |
1 |
DEMAG 9 HP GEARHEAD MOTOR |
| 345 |
1 |
DEMAG 7.2 HP GEARHEAD MOTOR |
| 346 |
1 |
SEW EURODRIVE 1 1/2 HP/95.32:1 RATIO GEARHEAD
MOTOR |
| 347 |
1 |
SEW EURODRIVE 1 HP GEARHEAD MOTOR |
| 348 |
1 |
SEW EURODRIVE 1 HP/135.28:1 RATIO GEARHEAD MOTOR |
| 349 |
1 |
GEARHEAD MOTOR |
| 350 |
1 |
SEW EURODRIVE 1 1/2 HP/96.01:1 RATIO GEARHEAD
MOTOR |
| 351 |
1 |
1 1/2 HP GEARHEAD MOTOR |
| 352 |
1 |
GEARHEAD MOTOR |
| 353 |
1 |
NORD 1 HP/13.18:1 RATIO GEARHEAD MOTOR |
| 354 |
1 |
NORD 3/4 HP/30.94:1 RATIO GEARHEAD MOTOR |
| 355 |
1 |
NORD 3/4 HP/104.04:1 RATIO GEARHEAD MOTOR |
| 356 |
1 |
NORD 1 1/2 HP/25.22:1 RATIO GEARHEAD MOTOR |
| 357 |
1 |
NORD 1 1/2 HP/7.24:1 RATIO GEARHEAD MOTOR |
| 358 |
1 |
NORD 1 HP/44.72:1 RATIO GEARHEAD MOTOR |
| 359 |
1 |
SEW EURODRIVE 1.8 HP GEARHEAD MOTOR |
| 360 |
1 |
NORD 1 1/2 HP/94.35:1 RATIO GEARHEAD MOTOR |
| 361 |
1 |
NORD 20.03:1 RATIO GEARHEAD MOTOR |
| 362 |
1 |
SEW EURODRIVE 1 HP/39.27:1 RATIO GEARHEAD MOTOR |
| 363 |
1 |
SEW EURODRIVE 1/2 HP/134.24:1 RATIO GEARHEAD MOTOR |
| 364 |
1 |
HEMKLE 1 HP GEARHEAD MOTOR |
| 365 |
1 |
HEMKLE GEARHEAD MOTOR |
| 366 |
1 |
MORSE 1/2 HP/60:1 RATIO GEARHEAD MOTOR |
| 367 |
1 |
HEMKLE 1/3 HP/68.81:1 RATIO GEARHEAD MOTOR |
| 368 |
1 |
DEMAG REDUCER |
| 369 |
5 |
DEMAG REDUCERS |
| 370 |
4 |
ASSORTED REDUCERS |
| 371 |
12 |
ASSORTED REDUCERS |
| 372 |
1 |
RELIANCE 5 HP/1750 RPM D.C. MOTOR |
| 373 |
1 |
MOTOR |
| 374 |
1 |
U.S. 15 HP/3480 RPM MOTOR |
| 375 |
7 |
ASSORTED MOTORS |
| 376 |
11 |
ASSORTED MOTORS |
| 377 |
15 |
ASSORTED MOTORS |
| 378 |
15 |
ASSORTED MOTORS |
| 379 |
6 |
ASSORTED PUMPS |
| 380 |
1 |
LOT, MOTOR PARTS |
| 381 |
1 |
LOT, FEEDER PARTS |
| 382 |
1 |
LINCOLN 84870 DIAPHRAGM PUMP |
| 383 |
1 |
LINCOLN 84870 DIAPHRAGM PUMP |
| 384 |
1 |
GRACO 1590 DIAPHRAGM PUMP |
| 385 |
1 |
LOT, ASSORTED DIAPHRAGM PUMPS |
| 386 |
1 |
LOT, 56" CAUL PLATE CLEANING BRUSHES |
| 387 |
1 |
LOT, CAUL PLATE CLEANING BRUSHES |
| 388 |
1 |
LOT, MAT LEVELING BRUSHES |
| 389 |
1 |
BURELBACH 72" INSERT TOOTH CIRCULAR CUT OFF SAW
W/FRAME, BLADE, & GUARDS |
| 390 |
1 |
2 STATION CARRIAGE TYPE VACUUM TRANSFER W/VACUUM
PUMPS, CAUL PLATE LIFT & CARRIAGE TRAVEL GEARHEAD MOTORS |
| 391 |
1 |
11 1/2' RAIL MOUNTED CAUL PLATE TRANSFER ROLLCASE
W/SEW EURODRIVE 1 1/2 HP/95.42:1 RATIO ROLLCASE DRIVE, POWER TRAVEL GEARHEAD |
| 392 |
1 |
LOT, FORMER SPIKE WHEELS |
| 393 |
1 |
SAW ARBOR W/SPACERS |
| 394 |
1 |
LOT, SHOCK ABSORBERS |
| 395 |
1 |
MAC 4" VALVE |
| 396 |
1 |
LOT, STRETCH NET |
| 397 |
1 |
BRIDGE |
| 398 |
1 |
BRIDGE |
| 399 |
1 |
HYTROL 8'-2 SECTION MOTORIZED ROLLCASE |
| 400 |
1 |
5' MOTORIZED ROLLCASE |
| 401 |
1 |
4 1/2' MOTORIZED ROLLCASE W/ CLAMP |
| 402 |
1 |
4 1/2' MOTORIZED ROLLCASE W/ CLAMP |
| 403 |
1 |
LOT, 27" WIDE GRAVITY ROLLCASE (2 PCS.) |
| 404 |
1 |
12 1/2'X17" MOTORIZED BELT CONVEYOR |
| 405 |
1 |
LOT, DRYER SCREEN |
| 406 |
1 |
LOT, CHIP SHAKER SCREEN |
| 407 |
1 |
LOT, CONVEYOR BELTING |
| 408 |
1 |
LOT, BELTING |
| 409 |
1 |
ECLIPSE LOT, REGULATORS |
| 410 |
1 |
H.I.D. LOT, LIGHT FIXTURES |
| 411 |
1 |
POLYCHEM PC200 STRAPPING MACHINE |
| 412 |
1 |
MANLIFT |
| 413 |
1 |
CHERRY PICKER |
| 414 |
1 |
LOT, LATH STRIPS |
| 415 |
1 |
27'-3 STRAND 6" BELT TRANSFER ON CAUL PLATE RETURN
LINE W/ H&T ROLLS, STEEL FRAME, ALL LEGS (NO DRIVE) |
| 416 |
1 |
19 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME, FRONT LEGS (NO DRIVE, TAIL LEGS) |
| 417 |
1 |
19 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME, FRONT LEGS (NO DRIVE, TAIL, OR LEGS) |
| 418 |
1 |
19 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME, FRONT LEGS (NO DRIVE, TAIL, OR LEGS) |
| 419 |
1 |
14 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
STEEL FRAME (NO DRIVE, TAIL LEGS, OR HOLD DOWN ROLL) |
| 420 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 415 DRIVE) |
| 421 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 416 DRIVE) |
| 422 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 417 DRIVE) |
| 423 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 418 DRIVE) |
| 424 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 419 DRIVE) |
| 425 |
1 |
BRIDGE |
| 426 |
1 |
LOT, ALL CONTROLS FOR FORMING LINE IN CONTROL
HOUSE W/GUTTER UNDER HOUSE, & MONITOR PANEL BY LOT 31 |
| 427 |
1 |
METAL FRAMED CONTROL HOUSE W/ LIGHTS, WINDOWS,
AIR, DIAMOND PLATE FLOOR, & STEEL SUB-STRUCTURE |
| 428 |
1 |
CAUL PLATE SCRUBBER STATION W/ TOP & BOTTOM GEARHEAD
DRIVEN WIRE BRUSHES, 15 HP BLOWER, & EXHAUST MANIFOLD TO MAIN PIPE |
| 429 |
1 |
CAUL PLATE CARRIAGE TYPE VACUUM STACKER W/10 CUPS
IN 40"X9' RECTANGULAR PATTERN, W/ VACUUM PUMP, CAUL PLATE, LIFT & CARRIAGE TRAVEL
GEARHEAD MOTORS, & ELECTRICS |
| 430 |
1 |
CAUL PLATE CART W/RAIL |
| 431 |
1 |
15'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS, STEEL
FRAME, & ALL LEGS (NO DRIVE) |
| 432 |
1 |
16 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
& STEEL FRAME (NO TAIL LEGS OR DRIVE) |
| 433 |
1 |
16 1/2'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS,
& STEEL FRAME (NO TAIL LEGS OR DRIVE) |
| 434 |
1 |
15'-3 STRAND 6" BELT TRANSFER W/H&T ROLLS, CAUL
PLATE, STOP & GO FEEDER, & STEEL FRAME (NO TAIL LEGS OR DRIVE) |
| 435 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 431 DRIVE) |
| 436 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 432 DRIVE) |
| 437 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 433 DRIVE) |
| 438 |
1 |
SEW EURODRIVE 5 HP/24.52:1 RATIO GEARHEAD MOTOR
(LOT 434 DRIVE) |
| 439 |
1 |
CAUL PLATE CLEANING STATION W/ 134" SEGMENTED
BRUSH, 5 HP DRIVE MOTOR, MANIFOLD TO MAIN PIPE OVER MIDDLE FORMER |
| 440 |
1 |
CAUL PLATE CLEANING STATION W/ 134" SEGMENTED
BRUSH, 5 HP DRIVE MOTOR, MANIFOLD TO MAIN PIPE ABOVE LOT 440 |
| 441 |
1 |
22'-2 STRAND LUGGED CHAIN CLEANING STATION FEED
THRU TRANSFER W/GRAVITY ROLLS |
| 442 |
1 |
SEW EURODRIVE 2/8 HP/62.18:1 RATIO GEARHEAD MOTOR
(LOT 441 DRIVE) |
| 443 |
1 |
LOT, V-BELTS IN GRINDING ROOM |
| 444 |
1 |
ACME CIRCULAR SAW SHARPENER |
| 445 |
1 |
NEWMAN 280 ROTARY TUB KNIFE GRINDER 280343 |
| 446 |
1 |
WRIGHT W150-HD-B CARBidE CIRCULAR SAW FACE GRINDER
C9606 |
| 447 |
10 |
CIRCULAR SAW BLADES |
| 448 |
41 |
CIRCULAR SAW BLADES |
| 449 |
1 |
GRINDING WHEEL FOR NEWMAN 280 |
| 450 |
1 |
14X2X1 1/2 GRINDING WHEEL |
| 451 |
1 |
CIRCULAR SAW SET UP STAND |
| 452 |
1 |
LOT, STEEL WORK BENCH W/BLUE STEEL TABLE CORNER |
| 453 |
1 |
METAL SHELF W/ASSORTED CONTENTS |
| 454 |
1 |
LOT, ASSORTED MILL PARTS IN 1 SECTION OF SHELF
(NO SHELF) |
| 455 |
1 |
LOT, ASSORTED MILL PARTS IN 1 SECTION OF SHELF
(NO SHELF) |
| 456 |
1 |
LOT, ASSORTED MILL PARTS IN 1 SECTION OF SHELF
(NO SHELF) |
| 457 |
1 |
LOT, DESK, MONITOR, & TYPRWRITER |
| 458 |
1 |
LOT, FILTERS |
| 459 |
1 |
AIR CHAMP CLUTCH BREAK |
| 460 |
1 |
REXROTH 22R-PKD63K08 HYDRAULIC PUMP |
| 461 |
1 |
REXROTH PKC62NOO HYDRAULIC PUMP |
| 462 |
1 |
METAL CABINET W/ASSORTED CONTENTS |
| 463 |
1 |
METAL FRAME SHELF W/ASSORTED CONTENTS |
| 464 |
1 |
LOT, BRUSHES |
| 465 |
1 |
LOT, MILL CHAIN |
| 466 |
1 |
LOT, BELTING |
| 467 |
1 |
LOT, ASSORTED MILL PARTS IN 2 SECTIONS OF SHELF
(NO SHELF) |
| 468 |
1 |
LOT, ASSORTED MILL PARTS IN 2 SECTIONS OF SHELF
(NO SHELF) |
| 469 |
9 |
SECTIONS OF ASSORTED BOLT TOGETHER ADJUSTABLE
SHELVING IN PARTS ROOM (ALLOW 1 WEEK BEFORE REMOVAL) |
| 470 |
1 |
LOT, (4) FILE CABINETS, CART, SHIPPING DESK, &
MISC. OFFICE EQUIPMENT |
| 471 |
1 |
LOT, MILLWRIGHT CABINET W/ ASSORTED CONTENTS |
| 472 |
1 |
WOOD CORNER DESK |
| 473 |
1 |
TWO SECTION COUNTER |
| 474 |
1 |
LOT, 72" WOOD DESK W/CHAIR & CARPET PROTECTOR |
| 475 |
1 |
LOT, (2) WOOD LATERAL FILE CABINETS W/COUNTER
TOP |
| 476 |
2 |
RUST COLORED UPHOLSTERED ARM CHAIRS |
| 477 |
1 |
4 DRAWER LEGAL SIZE FILE CABINET |
| 478 |
1 |
4 DRAWER LEGAL SIZE FILE CABINET |
| 479 |
1 |
LOT, WOOD BOOKCASE W/CORKBOARD |
| 480 |
1 |
METAL CABINET |
| 481 |
1 |
4 DRAWER FIRE RATED FILE CABINET |
| 482 |
1 |
4 DRAWER FIRE RATED FILE CABINET |
| 483 |
1 |
4 DRAWER FILE CABINET |
| 484 |
1 |
4 DRAWER FILE CABINET |
| 485 |
1 |
4 DRAWER FILE CABINET |
| 486 |
1 |
4 DRAWER FILE CABINET |
| 487 |
1 |
LOT, (5) ASSORTED FILE CABINETS |
| 488 |
1 |
LOT, LAB GLASSWARE |
| 489 |
1 |
GRAPH RECORDER |
| 490 |
1 |
CENTRAL ISLAND W/S.S. TOP |
| 491 |
1 |
WOOD BOOKCASE |
| 492 |
1 |
METAL CABINET W/ASSORTED LAB CONTENTS |
| 493 |
1 |
4 DRAWER FILE CABINET |
| 494 |
1 |
GIBSON HEAVY DUTY FREEZER |
| 495 |
1 |
CREDENZA |
| 496 |
1 |
KONICA 2020 COPIER W/10 TRAY COLLATOR |
| 497 |
1 |
MONROE RL-7352 COPIER W/10 TRAY COLLATOR |
| 498 |
1 |
H.P. DESKJET 520 PRINTER |
| 499 |
1 |
LOT, (2) WOOD LATERAL FILE CABINETS W/COUNTER |
| 500 |
1 |
LOT, ASSORTED OFFICE HARDWARE |
| 501 |
1 |
LOT, U-SHAPED WOOD DESK W/CHAIR & CARPET PROTECTOR |
| 502 |
1 |
WOOD CABINET |
| 503 |
1 |
LOT, 60" WOOD DESK W/CHAIR |
| 504 |
1 |
LOT, 60" METAL DESK W/CHAIR |
| 505 |
1 |
LOT, 72" WOOD DESK W/CHAIR (ALLOW 2 WEEKS BEFORE
REMOVAL) |
| 506 |
1 |
WOOD 2 DRAWER LATERAL FILE CABINET |
| 507 |
1 |
72" WOOD DESK IN LUNCH ROOM |
| 508 |
1 |
LOT, (4) LUNCH ROOM TABLES W/ CHAIRS |
| 509 |
1 |
STEEL RACK BY MAIN ROLL UP DOOR |
