| LOT# |
QTY. |
DESCRIPTION |
| 501 |
1 |
1988 PRECISION #14M RH CHOP SAW 14730 |
| 502 |
1 |
1988 PRECISION #14M RH CHOP SAW 14736 |
| 503 |
1 |
1988 PRECISION #14M RH CHOP SAW 14732 |
| 504 |
1 |
1988 PRECISION #14M RH CHOP SAW 14751 |
| 505 |
1 |
1988 PRECISION #14M RH CHOP SAW 14735 |
| 506 |
1 |
1988 PRECISION #14M RH CHOP SAW 14738 |
| 507 |
1 |
1988 PRECISION #14M RH CHOP SAW 14733 |
| 508 |
1 |
INDUSTRIAL C500R RH CHOP SAW 1178664 |
| 509 |
1 |
INDUSTRIAL C500R RH CHOP SAW |
| 510 |
1 |
INDUSTRIAL C500R RH CHOP SAW |
| 511 |
1 |
INDUSTRIAL C500R RH CHOP SAW |
| 512 |
1 |
INDUSTRIAL C500R RH CHOP SAW |
| 513 |
1 |
INDUSTRIAL C500R RH CHOP SAW |
| 514 |
1 |
INDUSTRIAL C500R RH CHOP SAW |
| 515 |
1 |
WHIRLWIND LH CHOP SAW |
| 516 |
1 |
ARMSTRONG #16 CIRCULAR SAW SHARPENER 5797 |
| 517 |
1 |
ARMSTRONG #16 CIRCULAR SAW SHARPENER 3468 |
| 518 |
1 |
JAMES ORTH TRAVEL BED GRINDER 44633 |
| 519A |
1 |
PRESS ASSEMBLY |
| 519B |
1 |
OGAM PO-280 MULTI-RIP SAW, 1-3/4" DIA ARBOR,
FEED THRU ALLIGATOR BELT, 0-300 FPM FEED SPEEDS, ATTACHED ELECTRICS 122278 |
| 520 |
1 |
MARUNAKA ULTRA PHOENIX CUSTOM III VENEER SLICER,
POWERED FEEDER & HEIGHT ADJUSTMENT |
| 521 |
1 |
MARUNAKA #GL-40M TRAVEL BED KNIFE GRINDER, MAGNETIC
CHUCK 1012 |
| 522 |
1 |
KVAL 3-HEAD JAMB DRILL, FULLY ADJUSTABLE, 3/4HP/3450
RPM MOTORS, FOOT PEDAL, 440V |
| 523 |
1 |
MEREEN JOHNSON NO. 435H MULTI-RIP SAW, 2-1/2"
DIA ARBOR, 30HP/3600 RPM ARBOR MOTOR, FEED THROUGH SLAT BED CHAIN W/5HP/1800 RPM
MOTOR TO REDUCER, ATTACHED ELECTRICS |
| 524 |
1 |
1983 OMMA #FTF2M1400 55" GLUE ROLL 2499 |
| 525 |
1 |
BLACK BROS. 14" GLUE ROLL W/24"X36" POWERED BELT
121856 |
| 526 |
1 |
SERGIANI 4'X8' POWERED FEED TABLE |
| 527 |
1 |
4'X8' POWERED TRANSFER BELT |
| 528 |
1 |
CONTROL PANEL |
| 529 |
1 |
CONTROL PANEL |
| 530 |
1 |
GUBISCH TYPE GL300/320 2-HEAD MOULDER, 7.5 KW
ARBOR MOTORS, ADJ HEADS POWERED FEED ROLLS W/CONTROL PANEL 4992 |
| 531 |
1 |
APPROX 25HP HYDRAULIC UNIT |
| 532 |
1 |
GRECON #2004 OPTIMIZING CUT-OFF SAW, 20" SAW,
6.6 KW ARBOR MOTOR, POWERED FEED ROLLERS, HOLD DOWNS, 14' POWERED INFEED & OUTFEED
CONVEYORS, MARKED ELECTRICS |
| 533 |
1 |
JENKINS #191SB MULTI-RIP SAW W/(4) ADJ SAWS,
7.5HP/3450 RPM MOTORS, 3-STRAND POWERED HEAD SHAFT 935 |
| 534 |
1 |
ELMAG #505/2HP60 53" SANDER, TOP & BOTTOM HEADS
W/40HP/2900 RPM MOTORS, 3HP/ 1450 RPM FEED MOTOR, 2HP/1450 RPM HT ADJ MOTOR, (2)
BRUSH MOTORS, UPPER SANDING HEAD OPENING 3MM. TO 100MM., 450MM. MINIMUM LENGTH,
1370MM.X1620MM BELT, 8-24M/MIN POWERED IN & OUTFEED ROLLCASES NEW SANDING DRUM,
PINCH ROLLS, CONTROL PANEL, PARTS 15583 |
| 535 |
1 |
DIEHL #D68 6-HEAD MOULDER, 2"X8" CAP, 15HP BOTTOM
HEAD, 10HP SIDE HEAD, 20HP TOP HEAD, (2) 10HP SIDE HEADS, 20HP BOTTOM HEAD, POWERED
ROLLS 0-345 FPM/MARKED ELECTRICS 71M-2854-2082 |
| 536 |
1 |
TRI-STATE 10' POWERED INFEED ROLLCASE W/(10)
5"X24" ROLLS, LINCOLN 5HP/1775 RPM MOTOR |
| 537 |
1 |
DUPAR 50HP HYDRAULIC UNIT |
| 538 |
1 |
ROCKWELL #D80-3200 DOUBLE END TENONER, 3-HEADS,
8' CAPACITY W/CONTROL PANEL & PARTS |
| 539 |
1 |
ROCKWELL #D80-3200 DOUBLE END TENONER, 3-HEADS,
8' CAPACITY W/CONTROL PANEL & PARTS |
| 540 |
1 |
MANN RUSSELL R.F. BATCH GLUE LINE, BATCH OVEN,
61 KVA GENERATOR, 13.55 FREQUENCY, 7.5HP HYDRAULIC UNIT, IN & OUTFEED TABLES,
S/N ON GENERATOR-100124 |
| 541 |
1 |
SIGNODE #MD300BB STRAPPER 10598 |
| 542 |
1 |
14" CHOP SAW W/MOTOR |
| 543 |
1 |
1.5 KW V/S HYDRAULIC UNIT |
| 544 |
1 |
51" ROLL ASSEMBLY W/ROLLS, SPROCKET & MOTOR |
| 545 |
1 |
51" ROLL ASSEMBLY W/ROLLS, SPROCKET & MOTOR |
| 546 |
1 |
8"X13' BELT CONVEYOR, 1.5HP MAGNETEK/DODGE GEARHEAD
|
| 547 |
1 |
BLOWER W/30HP MOTOR |
| 548 |
1 |
CASTELLANI #L-VE1350 AUTO VACUUM STACKER W/4.8HP
MOTORS, ARM & CARRIAGE ASSEMBLY W/MOTOR/BRAKE TO SM CYCLO REDUCER, CONTROL PANEL
|
| 549 |
1 |
10' FEED TABLE W/52" ROLLS & 62" BELTS, 2 DRIVE
MOTORS |
| 550 |
1 |
16' FEED TABLE W/52" ROLLS & DRIVE MOTOR |
| 551 |
1 |
8', 3-STRAND TRANSFER W/DRIVE MOTOR |
| 552 |
1 |
16' POWERED ROLLCASE W/(21) 4-1/2"X47" ROLLS,
SM-CYCLO- 1-1/2HP/20.1 RPM GEARHEAD MOTOR |
| 553 |
1 |
8' POWERED ROLLCASE W/4-1/2"X 47" ROLLS, GEARHEAD
MOTOR |
| 554 |
1 |
8' POWERED ROLLCASE W/4-1/2"X 47" ROLLS, GEARHEAD
MOTOR |
| 555 |
1 |
SERGIANI #LAS330 AUTOMATIC THROUGH-FEED PRESS,
175 TONS MAX PRESSURE, (8) 1300X3300MM PLATENS, 80" MAX THICKNESS, 20 KW, 440V,
42"X12' INFEED TABLE W/(2) RACINE HYDRAULIC UNITS, FULTON THERMOPAC LP GAS FIRED
BOILER, PRESSURE TANK, PUMP VALVES, ROLLS 490683 |
| 556 |
1 |
INDUSTRIAL #3470 FINGER JOINT SYSTEM, SOLD AS
LOTTED |
| 557 |
1 |
INDUSTRIAL #3470 FINGER JOINT SYSTEM, SOLD AS
LOTTED |
| 558 |
1 |
INDUSTRIAL #3470 FINGER JOINT SYSTEM, SOLD AS
LOTTED |
| 559 |
1 |
INDUSTRIAL #6-34700 FINGER JOINT SYSTEM, SOLD
AS LOTTED 5-3400-6-7468 |
