| LOT# |
QTY. |
DESCRIPTION |
| 501 |
1 |
SKK 5 HP, 25 RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT
500 DRIVE) |
| 502 |
1 |
SKK 5 HP, 20 RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT
500 DRIVE) |
| 503 |
1 |
31', H480 BOX CHAIN LOG HAUL CONVEYOR W/H&T SPROCKETS,
STEEL TROUGH, CATWALK, SUPPORTS TO GROUND |
| 504 |
1 |
SKK 7-1/2 HP, 37 RPM GEARHEAD MOTOR, DRIVE CHAIN
(LOT 503 DRIVE) |
| 505 |
1 |
4-1/2' CUT BAR TYPE LOG CUTOFF CHAIN SAW W/20
HP DRIVE MOTOR, LOG CRADLE, HYDRAULIC SUPPORT UNIT |
| 506 |
1 |
CONTROL BOOTH W/ALL CONTENTS |
| 507 |
1 |
23' LOG HAUL W/(6) LOG LENGTH STOP ARMS, H&T SPROCKETS,
STEEL TROUGH, HYDRAULIC DRIVE MOTOR, SUPPORTS TO GROUND |
| 508 |
1 |
25 HP HYDRAULIC SUPPORT UNIT FOR LOG HAUL (DOWNSTAIRS
- PLEASE PREVIEW) |
| 509 |
1 |
MORBARK DEBARKER W/14", 100 HP DEBARKING HEAD,
HYDRAULIC DRIVEN SPIKE LOG TURNING ROLLS, CONTROL BOOTH, HYDRAULIC SUPPORT UNIT
DOWNSTAIRS |
| 510 |
1 |
25' H480 BOX CHAIN LOG HAUL W/H&T SPROCKETS, STEEL
TROUGH, 3 ARM LOG KICKER, CATWALK, SUPPORTS TO GROUND |
| 511 |
1 |
DRIVE MOTOR W/FALK 9.25:1 RATIO REDUCER, DRIVE
CHAIN (LOT 510 DRIVE) |
| 512 |
1 |
17', 4 STRAND C82 CHAIN LOG DECK W/H SHAFT, T
SPROCKETS, (2) DRIVE MOTORS, SUPPORTS TO GROUND |
| 513 |
2 |
SQUARE D 30 AMP DISCONNECT SWITCHES |
| 514 |
1 |
42' H480 BOX CHAIN LOG HAUL W/H&T SPROCKETS, STEEL
RACES & RETURNS, 5 ARM LOG KICKER, MARKED STEEL SUPPORTS |
| 515 |
1 |
SKK 7-1/2 HP, 45 RPM GEARHEAD MOTOR, DRIVE CHAIN
(LOT 514 DRIVE) |
| 516 |
1 |
14', 7 STRAND H78 CHAIN LOG DECK W/H-SHAFT, T
SPROCKETS, MARKED STEEL SUPPORTS |
| 517 |
1 |
MITSUBISHI 5 HP, 40 RPM GEARHEAD MOTOR, DRIVE
CHAIN (LOT 516 DRIVE) |
| 518 |
1 |
HYDRAULIC LOG LOADER, LOG FLIPPER ASSEMBLY W/CYLINDERS |
| 519 |
1 |
MORBARK 20'X36", 4 KNEE LINEAR POSITIONING LOG
CARRIAGE W/RAIL, INOVEC SETWORKS, ALL CONTROLS IN CAB |
| 520 |
1 |
INOVEC 30 HP HYDRAULIC SUPPORT UNIT FOR CARRIAGE
(LOCATED DOWNSTAIRS - SOLD FROM UPSTAIRS) |
| 521 |
1 |
TYRONE BERRY SMA240 HYDRAULIC CARRIAGE DRIVE W/CABLE,
HYDRAULIC TENSIONING CABLE ENDS, 100 HP PUMP |
| 522 |
2 |
LASER LIGHTS |
| 523 |
1 |
50 HP HYDRAULIC SUPPORT UNIT FOR LOG TURNER (UNDER
CONTROL CAB - SOLD FROM UPSTAIRS) |
| 524 |
1 |
CONTROL CAB W/AIR CONDITIONER (NO CONTENTS) |
| 525 |
1 |
FILER & STOWELL 6' RIGHT HAND MECHANICAL STRAIN
HEAD RIG BANDMILL W/DRIVE BELTS (MOTOR SOLD AT LOT 653) |
| 526 |
1 |
32' HEAD RIG OUTFEED ROLLCASE W/(22) 30"X6-1/2"
DIA ROLLS, WASTE KICKER W/CYLINDER |
| 527 |
1 |
SKK 5 HP, 9.21:11 RATIO GEARHEAD MOTOR (LOT 526
DRIVE) |
| 528 |
1 |
APPROX. 74'X72'X23' EAVE ALL STEEL BOLT TOGETHER
SAWMILL BUILDING (SHELL ONLY) |
| 529 |
1 |
ALLEN BRADLEY SIZE 3, 509 SERIES MAG STARTER |
| 530 |
1 |
ACME 10 KVA, 240X480 TO 120/240 VOLT, SINGLE PHASE
TRANSFORMER W/BREAKER PANEL |
| 531 |
1 |
LOT, REMAINING UNSOLD ELECTRIC BOXES ON WALL |
| 532 |
1 |
ARMSTRONG #4 STRETCHER ROLL W/LEVELING BLOCKS
& TABLE |
| 533 |
1 |
WRIGHT W1801 BANDSAW SIDE TOOTH GRINDER W/CLAMP
& STANDS 1825 |
| 534 |
4 |
BANDSAW BLADE CARTS |
| 535 |
5 |
HEAD RIG BANDSAW BLADES IN ROOM (2 LOCATIONS) |
| 536 |
36 |
QUAD BANDSAW BLADES IN ROOM (2 LOCATIONS) |
| 537 |
10 |
TURNER BANDSAW BLADES |
| 538 |
1 |
SAW GUIDE MILLING MACHINE |
| 539 |
1 |
HOE SAW GUIDE MILLING MACHINE |
| 540 |
1 |
GUIDE MILLING MACHINE |
| 541 |
1 |
SAW GUIDE PATTERN JIG |
| 542 |
1 |
STEEL TABLE |
| 543 |
1 |
ISELI MECOMAT 391 BANDSAW BLADE AUTO LEVELER S1289 |
| 544 |
1 |
LOT, TURNER RESAW BLADES |
| 545 |
1 |
ARMSTRONG 2LH BANDSAW SHARPENER W/CLAMP & STANDS
14847 |
| 546 |
1 |
ARMSTRONG 2RH BANDSAW SHARPENER W/CLAMP & STANDS
13008 |
| 547 |
1 |
ARMSTRONG #2 STRETCHER ROLL W/LEVELING BLOCKS,
WELDING CLAMP, TABLE |
| 548 |
1 |
HOBART HANDLER 120 SINGLE PHASE WELDER |
| 549 |
1 |
(1) PULL UP DOOR |
| 550 |
1 |
DAYTON 1/2 TON CAP., SINGLE PHASE ELECTRIC CHAIN
HOIST W/TROLLEY & RAIL |
| 551 |
1 |
LOT, HEATERS IN SAWMILL BUILDING |
| 552 |
1 |
ISELLI TYPE SAA BANDSAW BLADE STELITE TIPPER 707008 |
| 553 |
1 |
ARMSTRONG 4LH BANDSAW SHARPENER W/CLAMP & STANDS
9962 |
| 554 |
1 |
ARMSTRONG 4RH BANDSAW SHARPENER W/CLAMP & STANDS
4744 |
| 555 |
1 |
ARMSTRONG 4LH BANDSAW SHARPENER W/CLAMP & STANDS
13110 |
| 556 |
1 |
ARMSTRONG 4RH BANDSAW SHARPENER W/CLAMP & STANDS
14892 |
| 557 |
4 |
SECTIONS OF ALLEN BRADLEY MCC'S W/(22) STATIONS |
| 558 |
1 |
G.E. 200 AMP AV-LINE SWITCHBOARD W/2000 AMP BREAKER |
| 559 |
1 |
G.E. 2 SECTION AV-LINE SWITCHBOARD W/(7) ASSORTED
DISCONNECTS |
| 560 |
1 |
SURGEL TRANSFORMER, 50 KVA, 240X480 TO 120/240
VOLT, SINGLE PHASE, W/BREAKER PANEL |
| 561 |
1 |
SQUARE D 400 AMP RATED BREAKER PANEL |
| 562 |
1 |
G.E. 200 AMP DISCONNECT SWITCH |
| 563 |
1 |
G.E. 400 AMP DISCONNECT SWITCH |
| 564 |
3 |
G.E. 200 AMP DISCONNECT SWITCHES |
| 565 |
1 |
LOT, (8) REMAINING WALL MOUNTED ELECTRIC BOXES
IN ROOM |
| 566 |
1 |
ARMSTRONG #4 STRETCHER ROLL W/LEVELING BLOCKS,
WELDING CLAMP, TABLE 4856 |
| 567 |
5 |
RESAW BLADES |
| 568 |
1 |
LOT, MARKED CABINETS IN ROOM W/ASSORTED CONTENTS |
| 569 |
1 |
HANCHETT #4R BACK GAUGE |
| 570 |
1 |
HANCHETT #4R BACK GAUGE |
| 571 |
1 |
HANCHETT #3R BACK GAUGE |
| 572 |
1 |
SET OF STRETCHER ROLLS |
| 573 |
1 |
SET OF STRETCHER ROLLS |
| 574 |
1 |
SET OF STRETCHER ROLLS |
| 575 |
1 |
ARMSTRONG #5 PNEUMATIC SWAGE |
| 576 |
1 |
VOLLMER MZ40U DOUBLE SIDE MIC |
| 577 |
1 |
SAW FILING BLADE MOVING ATTACHMENT |
| 578 |
1 |
SAW FILING BLADE MOVING ATTACHMENT |
| 579 |
1 |
JOCKEY GRINDER |
| 580 |
1 |
LOT, DIAMOND GRINDING WHEELS |
| 581 |
1 |
LOT, DIAMOND GRINDING WHEELS |
| 582 |
1 |
LOT, WHEEL DRESSERS |
| 583 |
1 |
LOT, ASSORTED GRINDING WHEELS |
| 584 |
1 |
LOT, TABLE & CART |
| 585 |
1 |
LOT, HID & FLUORESCENT LIGHTS IN SAWMILL BUILDING |
| 586 |
2 |
WHITE MARKER BOARDS IN ROOM |
| 587 |
1 |
HANCHETT CHALLENGER DN60 STRAIGHT KNIFE GRINDER
(DOWNSTAIRS) 6136 |
| 588 |
1 |
CM&E #69 BENT KNIFE GRINDER W/HYDRAULIC UNIT 2341 |
| 589 |
1 |
SCHURMAN EDGER GUIDE BABBIT MILLING MACHINE |
| 590 |
1 |
ARMSTRONG TENSION GAUGE GRINDER |
| 591 |
1 |
EDGER GUIDE BABBIT JIG |
| 592 |
1 |
BELL INDUSTRIES F500 CIRCULAR SAW TOP & SIDE GRINDER
76C40 |
| 593 |
1 |
DUAL SIDE EDGER GUIDE BABBIT MILLING MACHINE |
| 594 |
1 |
WRIGHT W1700 CIRCULAR SAW FACE GRINDER |
| 595 |
1 |
WRIGHT W150HD CIRCULAR SAW TOP GRINDER |
| 596 |
1 |
ARMSTRONG #25 CIRCULAR SAW SHARPENER W/DUST COLLECTOR
10063 |
| 597 |
1 |
ARMSTRONG CIRCULAR SAW POST GRINDER |
| 598 |
1 |
OXY-ACET SET |
| 599 |
1 |
30" DIA ANVIL |
| 600 |
1 |
19"X4" ANVIL |
| 601 |
1 |
19"X1-7/8" ANVIL |
| 602 |
1 |
7" DIA ANVIL |
| 603 |
1 |
STEEL FRAME TABLE |
| 604 |
1 |
LOT, (2) MARKED CABINETS IN ROOM W/ASSORTED CONTENTS |
| 605 |
1 |
ARMSTRONG 310C CIRCULAR SAW STRETCHER ROLL 15893 |
| 606 |
1 |
ARMSTRONG #16 CIRCULAR SAW SHARPENER 9491 |
| 607 |
1 |
CIRCULAR SAW POST GRINDER |
| 608 |
1 |
24" DIA ANVIL W/TABLE |
| 609 |
9 |
CANTER HEAD SAWBLADES |
| 610 |
14 |
TRIM SAW BLADES |
| 611 |
10 |
TRIM SAW BLADES |
| 612 |
17 |
EDGER SAW BLADES |
| 613 |
27 |
EDGER SAW BLADES |
| 614 |
8 |
EDGER SAW BLADES |
| 615 |
2 |
CANTER HEAD SAWBLADES |
| 616 |
3 |
SAWBLADES |
| 617 |
21 |
EDGER SAWBLADES |
| 618 |
19 |
EDGER SAWBLADES |
| 619 |
20 |
EDGER SAWBLADES |
| 620 |
20 |
CANTER SAWBLADES |
| 621 |
1 |
WRIGHT W1801 CIRCULAR SAW SIDE TOOTH GRINDER |
| 622 |
1 |
BABBIT JIG |
| 623 |
1 |
LOT, ARMSTRONG CAM WHEELS |
| 624 |
1 |
LOT, CHAIN SAW BARS |
| 625 |
1 |
BABBIT JIG |
| 626 |
1 |
BABBIT JIG |
| 627 |
1 |
LOT, BENT KNIFE HOLDERS |
| 628 |
1 |
LOT, BENT KNIVES |
| 629 |
1 |
LOT, BENT KNIVES |
| 630 |
1 |
LOT, 16-3/4" CHIPPER KNIVES |
| 631 |
1 |
LOT, KNIVES |
| 632 |
1 |
BABBIT MILLING MACHINE |
| 633 |
1 |
DRY VACUUM |
| 634 |
1 |
DOUBLE SINK |
| 635 |
1 |
LOT, CANTER HEAD GAINER PLATES |
| 636 |
1 |
LOT, CANTER HEAD GAINER PLATES |
| 637 |
1 |
LAFERT LMS6C2 HAND HELD DUAL SIDE TOOTH GRINDER |
| 638 |
1 |
CIRCULAR SAW STAND |
| 639 |
1 |
STRAIGHT KNIFE GRINDER |
| 640 |
1 |
BABBIT POT W/EXHAUST HOOD, ELECTRICS, TOOLING |
| 641 |
1 |
BABBIT POT |
| 642 |
1 |
STEEL TABLE |
| 643 |
1 |
DUST COLLECTOR (OUTSIDE) |
| 644 |
1 |
EAR PLUG/HAZARDOUS INFORMATION STATION |
| 645 |
1 |
LOT, 15 KVA TRANSFORMER, BREAKER PANEL, DISCONNECT
IN OFFICE |
| 646A |
1 |
LOT, REMAINING CONTENTS OF OFFICE |
| 646B |
1 |
28'X18" BELT CONVEYOR W/H&T DRUMS, STEEL TROUGH,
5 HP MOTOR, DODGE 234 RPM REDUCER |
| 647 |
1 |
DUSTKOP DUST COLLECTOR UNDER MILL |
| 648 |
1 |
70'-H110 BOX CHAIN WASTE CONVEYOR W/H&T SPROCKETS,
STEEL TROUGH |
| 649A |
1 |
5 HP MOTOR W/DODGE 56 RPM REDUCER, DRIVE CHAIN
(LOT 648 DRIVE) |
| 649B |
1 |
35'X16" BELT CONVEYOR W/H&T DRUMS, STEEL TROUGH |
| 649C |
1 |
SKK 5 HP, 125 RPM GEAR HEAD MOTOR, DRIVE CHAIN
(LOT 649B DRIVE) |
| 649D |
1 |
24' H78 RAKE CHAIN CONVEYOR W/H&T SPROCKETS, STEEL
TROUGH, WINSMITH 1-1/2 HP, 29 RPM GEAR HEAD MOTOR (BEHIND H.R. DRIVE) |
| 650 |
1 |
23'-H78 CHAIN WASTE CONVEYOR W/15" FLITES, H&T
SPROCKETS, STEEL TROUGH, U.S. 2 HP/68 RPM GEARHEAD MOTOR |
| 651 |
1 |
21'-H78 CHAIN WASTE CONVEYOR W/11" FLITES, H&T
SPROCKETS, STEEL TROUGH, G.E. PACIFIC 2 HP/40 RPM GEARHEAD MOTOR |
| 652 |
1 |
53'-H110 BOX CHAIN WASTE CONVEYOR W/H&T SPROCKETS,
STEEL TROUGH |
| 653 |
1 |
G.E. 200 HP/700 RPM SLIP RIG HEAD RIG DRIVE MOTOR
(NO BELTS) |
| 654 |
1 |
G.E. 200 HP BANDMILL STARTED W/GRID (PLEASE PREVIEW) |
| 655 |
1 |
LOT, SPROCKETS W/2-SECTIONS OF WOOD SHELF |
| 656 |
1 |
LOT, COUPLERS |
| 657 |
1 |
LOT, AIR BAGS |
| 658 |
1 |
LOT, SHEAVES |
| 659 |
1 |
LOT, TAPER LOCKS |
| 660 |
1 |
LOT, ROLLER CHAIN IN BOXES |
| 661 |
1 |
LOT, ASSORTED CHAIN |
| 663 |
1 |
LOT, BEARINGS |
| 664 |
1 |
LOT, NUTS & BOLTS |
| 665 |
1 |
LOT, BEARINGS |
| 666 |
1 |
LOT, PIPE FITTINGS |
| 667 |
1 |
LOT, PIPE FITTINGS |
| 668 |
1 |
LOT, STEEL TOP TABLE W/ASSORT CONTENTS |
| 669 |
1 |
LOT, CONVEYOR BELT REPAIR EQUIPMENT & SUPPLIES |
| 670 |
1 |
LOT, CHAIN REPAIR LINKS |
| 671 |
1 |
LOT, AIR SYSTEM PARTS W/SHELVES & BENCH |
| 672 |
1 |
LO-MAN LOT, AIR LINE WATER EXTRACTORS DRYERS |
| 673 |
1 |
LOT, ASSORT GAUGES |
| 674 |
1 |
WATER HEATER |
| 675 |
1 |
40' ALUMINUM STORAGE CONTAINER W/LIGHTS (NO CONTENTS) |
| 676 |
1 |
40' ALUMINUM STORAGE CONTAINER W/LIGHTS (NO CONTENTS) |
| 677 |
1 |
40' ALUMINUM STORAGE CONTAINER W/LIGHTS (NO CONTENTS) |
| 678 |
1 |
40' ALUMINUM STORAGE CONTAINER W/LIGHTS (NO CONTENTS) |
| 679 |
1 |
40' ALUMINUM STORAGE CONTAINER W/LIGHTS (NO CONTENTS) |
| 680 |
1 |
40' ALUMINUM STORAGE CONTAINER W/LIGHTS (NO CONTENTS) |
| 681A |
1 |
KELLOGG AMERICAN 15 HP, 3 PH TANK MOUNTED AIR
COMPRESSOR |
| 681B |
1 |
B&D ABRASIVE CHOP SAW |
| 681C |
1 |
TOLEDO ABRASIVE CHOP SAW |
| 681D |
1 |
CRAFTSMAN WET/DRY VACUUM |
| 681E |
1 |
DAYTON WET/DRY VACUUM |
| 681F |
1 |
LOT, LUBE UNITS, BARREL PUMPS |
| 681G |
2 |
PROPANE FIRED SPACE HEATERS W/TANK |
| 681H |
1 |
HOMELITE 150,000 BTU OIL FIRED SPACE HEATER |
| 681I |
1 |
LINCOLN LN25 WIRE FEEDER |
| 681J |
1 |
WATERBUS GAS FIRED PUMP |
| 681K |
1 |
LOT, HYDRAULIC HOSE |
| 681L |
1 |
LOT, HOSE FITTINGS W/CABINET |
| 681M |
1 |
LOT, ASSORTED ROLLING STOCK PARTS, LOOSE CONTENTS
OF BOTTOM CONTAINER |
| 681N |
1 |
LOT, ASSORTED ROLLING STOCK PARTS, LOOSE CONTENTS
OF TOP CONTAINER |
| 681O |
1 |
THREE SIDED WOOD FRAME BLDG W/LIGHTS |
| 682 |
1 |
WRIGHT 2-TON CAP 1 PH ELECTRIC CHAIN HOIST W/PIN
TOGETHER A-FRAME |
| 683 |
1 |
CM 1/2 TON CAP 1 PH ELECTRIC CHAIN HOIST W/TROLLY
& RAIL |
| 684 |
2 |
225 GAL ENGINE FUEL STORAGE TANKS W/GRACO PNEUMATIC
PUMP |
| 685 |
1 |
LOT, REMAINING LOOSE CONTENTS OF OIL STORAGE CONTAINER |
| 686 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 687 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 688 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 689 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 690 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 691 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 692 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 693 |
1 |
HYDRAULIC PUMP OR/MOTOR |
| 694 |
5 |
ASSORT HYDRAULIC PUMPS OR/ MOTORS |
| 695 |
15 |
ASSORT HYDRAULIC PUMPS OR MOTORS |
| 696 |
1 |
LOT, MORBARK CARRIAGE PARTS |
| 697 |
1 |
LOT, ASSORT ACCUMULATORS |
| 698 |
1 |
LOT, ASSORT HYDRAULIC VALVE BODIES/PARTS |
| 699 |
1 |
TANNER TANK |
| 700 |
1 |
LOT, ASSORT BRASS VALVES |
| 701 |
1 |
HYDRAULIC CYLINDER |
| 702 |
1 |
HYDRAULIC CYLINDER |
| 703 |
1 |
HYDRAULIC CYLINDER |
| 704 |
1 |
HYDRAULIC CYLINDER |
| 705 |
1 |
HYDRAULIC CYLINDER |
| 706 |
1 |
HYDRAULIC CYLINDER |
| 707 |
1 |
LOT, HYDRAULIC HOSE FITTINGS W/WOOD CABINET |
| 708 |
15 |
ASSORT CYLINDERS |
| 709 |
14 |
ASSORT CYLINDERS |
| 710 |
11 |
ASSORT CYLINDERS |
| 711 |
8 |
ASSORT CYLINDERS |
| 712 |
15 |
ASSORT CYLINDERS |
| 713 |
13 |
ASSORT CYLINDERS |
| 714 |
15 |
ASSORT CYLINDERS |
| 715 |
10 |
ASSORT CYLINDERS |
| 716 |
5 |
ASSORT CYLINDERS |
| 717 |
1 |
LOT, CYLINDER PARTS |
| 718 |
1 |
LOT, HOSE |
| 719 |
1 |
LOT, MILL PARTS & SUPPLIES W/METAL BLUE CABINET |
| 720 |
1 |
ALLEN BRADLEY SIZE 3, 509 SERIES MAG STARTER |
| 721 |
3 |
225 AMP CIRCUIT BREAKERS |
| 722 |
13 |
ASSORT CIRCUIT BREAKERS |
| 723 |
1 |
LOT,SERVO VALVES |
| 724 |
1 |
LOT, CAMERA EQUIPMENT |
| 725 |
1 |
LOT, ASSORT FUSES |
| 726 |
1 |
4" VISE W/BENCH |
| 727 |
1 |
2" VISE |
| 728 |
1 |
ACME 15 KVA, 240X480 TO 120/240 V, 1 PH TRANSFORMER
W/BREAKER PANEL |
| 729 |
1 |
LOT, REMAINING UNSOLD ELECTRIC BOXES ON WALL |
| 730 |
1 |
LOT, PARTS DRAWERS W/ASSORT FASTENERS |
| 731 |
1 |
LOT, QUARTZ HEATERS |
| 732A |
1 |
LOT, (2) HANGING SPACE HEATERS IN ROOM |
| 732B |
1 |
LOT, SAFETY HARNESSES |
| 733 |
1 |
LOT, ASSORT ELECTRICAL PARTS IN 1-SECTION OF SHELF
(NO SHELF) |
| 734 |
1 |
LOT, ASSORT ELECTRICAL PARTS IN 1-SECTION OF SHELF
(NO SHELF) |
| 735 |
1 |
LOT, ASSORT ELECTRICAL PARTS IN 1-SECTION OF SHELF
(NO SHELF) |
| 736 |
1 |
LOT, ASSORT ELECTRICAL PARTS IN 1-SECTION OF SHELF
(NO SHELF) |
| 737 |
4 |
SECTIONS ADJUSTABLE METAL PARTS SHELVING (1 WEEK
WAIT TO PICK UP) |
| 738 |
1 |
LOT, ELECTRIC WIRE W/RACKS |
| 739 |
1 |
LOT, ELECTRIC ROOM TOOLS IN CABINET |
| 740 |
1 |
LOT, MARKED TABLES, CABINETS, SHELVES ALONG WALL
(NO CONTENTS) |
| 741 |
1 |
REFRIGERATOR |
| 742 |
1 |
MICROWAVE |
| 743 |
1 |
DELL COMPUTER SYSTEM W/PRINTER, UPS |
| 744 |
1 |
LOT, ASSORT MARKED OFFICE FURNITURE |
| 745 |
1 |
LOT, SALES & PARTS CATALOGS |
| 746 |
1 |
LOT, BEARINGS |
| 747 |
1 |
LOT, PIPE INSULATION |
| 748 |
1 |
LOT, ASSORT ELECTRICAL |
| 749 |
1 |
LOT, DEBARKER PARTS |
| 750 |
1 |
LOT, ASSORT MILL PARTS |
| 751 |
1 |
LOT, V-BELTS |
| 752 |
1 |
WASTE OIL TANK W/BUILDING |
| 753 |
1 |
LOT, ASSORT FUELS W/METAL SHELF (IN MACHINE SHOP) |
| 754 |
1 |
WILTON 15" DRILL PRESS W/1 PH MOTOR |
| 755 |
1 |
50 TON HYDRAULIC SHOP PRESS |
| 756 |
1 |
TOOL BOX W/CONTENTS |
| 757 |
1 |
AJAX HERCULES 18"X8-1/2' C.C, QCGH, GAP BED ENGINE
LATHE W/3-JAW CHUCK, STEADY REST, TAIL STOCK |
| 758 |
1 |
LOT, SHAFTING |
| 759 |
1 |
INGERSOLL RAND 1/2 TON CAP 3 PH ELECTRIC CHAIN
HOIST W/TROLLY, JIB BOOM |
| 760 |
1 |
WARNER 1-1/2V VERTICAL MILLING MACHINE W/T- SLOT
TABLE |
| 761 |
1 |
6" MACHINIST VISE |
| 762 |
1 |
JOHNSON #J HORIZONTAL METAL CUTTING BAND SAW W/1
PH MOTOR |
| 763 |
1 |
LOT, BAND SAW BLADES |
| 765 |
1 |
LOT, HYDRAULIC FITTINGS W/METAL CABINET |
| 766 |
1 |
LOT, ASSORT MILL PARTS, SUPPLIES, LOOSE CONTENTS
OF DOWNSTAIRS ROOM |
| 767 |
1 |
LOT, ASSORT MILL PARTS, SUPPLIES, LOOSE CONTENTS
OF UPSTAIRS ROOM |
| 768 |
1 |
BLACK & DECKER ABRASIVE CHOP SAW |
| 769 |
1 |
POW COM 80 AMP WELDER |
| 770 |
1 |
HOBART 135 WELDER |
| 771 |
1 |
OXY/ACET SET W/CART |
| 772 |
1 |
OXY/ACET SET W/CART |
| 773 |
1 |
OXY/ACET SET W/CART |
| 774A |
1 |
OXY/ACET SET W/CART |
| 774B |
1 |
OXY/ACET SET |
| 774C |
1 |
OXY/ACET SET |
| 775 |
1 |
OXY/ACET SET |
| 776 |
1 |
OXY/ACET SET |
| 777 |
1 |
LOT, TORCH TIPS, ETC. |
| 778 |
1 |
LOT, OXY/ACET HOSE |
| 779 |
1 |
HOBART 300 AMP WELDING POWER SOURCE W/WIRE FEEDER |
| 780 |
1 |
HOBART 400 AMP WELDER |
| 781 |
1 |
ENERPAC HYDRAULIC POWER PACK |
| 782 |
1 |
PRECISION B GRADE 24X18X3 GRANITE SURFACE PLATE |
| 783 |
1 |
STARRETT A GRADE 18X12X4 GRANITE SURFACE PLATE |
| 784 |
1 |
LOT, STRAIGHT EDGES |
| 785 |
1 |
AMPROBE ELECTRICAL TEST METER |
| 786 |
1 |
STARRETT PARALLEL BLOCK SET |
| 787 |
1 |
METEK #1726 DIGITAL TACHOMETER |
| 788 |
1 |
METEK #1726 DIGITAL TACHOMETER |
| 789 |
1 |
STARRETT 18" HEIGHT GAUGE |
| 790 |
1 |
RAYTEK DIGITAL THERMOMETER |
| 791 |
1 |
MOONLIGHT M3.6X NIGHT SCOPE |
| 792 |
1 |
STARRETT DIAL INDICATOR |
| 793 |
1 |
STARRETT DIAL INDICATOR |
| 794 |
1 |
LOT, ASSORT MEASUREMENT EQUIP |
| 795 |
1 |
STARRETT MASTER PRECISION LEVEL |
| 796 |
1 |
STARRETT V-BASE LEVEL |
| 797 |
1 |
STARRETT 12" CALIPER |
| 798 |
1 |
8" CALIPER W/DIGITAL READOUT |
| 799 |
1 |
8" CALIPER W/DIGITAL READOUT |
| 800 |
1 |
7" CALIPER |
| 801 |
1 |
MITUTOYO 8" CALIPER |
| 802 |
1 |
MITUTOYO 8" CALIPER |
| 803 |
1 |
STARRETT 90 DEGREE LEVEL |
| 804 |
1 |
LOT, LUMBER QUALITY CONTROL L SIZE CALIPERS &
SOFTWARE |
| 805 |
1 |
CLIMAX PORTABLE MILLING MACHINE |
| 806 |
1 |
BROACH SET |
| 807 |
1 |
6" SWIVEL BASE VISE |
| 808 |
1 |
AIRCO #10 STRAIGHT LINE CUTTER |
| 809 |
1 |
JET T-SLOT ANGLE SET-UP TABLE |
| 810 |
1 |
6" MACHINIST VISE |
| 811 |
1 |
6" MACHINIST VISE |
| 812 |
1 |
LOT, C-CLAMPS |
| 813 |
1 |
ALORIS QUICK CHANGE TOOL HOLDER SET |
| 814 |
1 |
LOT, DRILL CHUCKS |
| 815 |
1 |
LOT, COLLETS |
| 816 |
1 |
OFF SET MILLING HEAD |
| 817 |
1 |
LOT, MILLING CUTTERS |
| 818 |
1 |
LOT, CARBIDE TIP TOOL HOLDERS W/BITS |
| 819 |
1 |
LOT, MATERIAL HOLD DOWN NUTS & BOLTS |
| 820 |
1 |
MAGNA TAP & DIE SET |
| 821 |
1 |
PUNCH SET |
| 822 |
1 |
LOT, LATHE TOOLING |
| 823 |
1 |
LOT, LATHE TOOLING |
| 824 |
1 |
LOT, TAPS & DIES |
| 825 |
1 |
4-JAW CHUCK |
| 826 |
1 |
3-JAW CHUCK |
| 827A |
1 |
LOT, DRILL BITS |
| 827B |
1 |
LOT, DRILL BITS |
| 828 |
1 |
BLACK & DECKER 3/4" MAG BASE DRILL |
| 829 |
1 |
6" VISE |
| 830 |
1 |
PIPE VISE W/STEEL TABLE |
| 831 |
2 |
TAN METAL TABLES |
| 832 |
1 |
LOT, GREASE GUNS |
| 833 |
1 |
LOT, BLOCK & TACKLE |
| 834 |
1 |
OIL FILTRATION UNIT W/PUMP, 1 PH MOTOR |
| 835 |
1 |
UTILITY 1-1/2 HP/3 PH DOUBLE END GRINDER |
| 836 |
1 |
JET 1 HP/1 PH DOUBLE END GRINDER |
| 837 |
1 |
LOT, 3-MARKED CABINETS W/CONTENTS, REFRIGERATOR |
| 838 |
1 |
LOT, NON FERROUS METALS |
| 839 |
1 |
CORD REEL |
| 840 |
1 |
WOOD FRAMED, METAL COVERED MACHINE SHOP BUILDING
W/LIGHTS & HEATERS |
| 841 |
1 |
STEEL RACK W/STEEL INVENTORY |
| 844 |
1 |
KOCKUMS 58"-8 KNIFE HORIZONTAL FEED, HORIZONTAL
DISCHARGE CHIPPER & DRIVE BELTS |
| 845 |
1 |
TOSHIBA 200 HP/1770 RPM CHIPPER DRIVE MOTOR (NO
BELTS) |
| 846 |
1 |
LOT, CHIPPER PARTS |
| 847 |
1 |
ALLEN BRADLEY 200 HP SMC CHIPPER STARTER |
| 848 |
1 |
BM&M #3328 6'X12' 3-DECK CHIP SHAKER SCREEN |
| 849 |
1 |
LOT, CYCLONE ON TOP OF BUILDING W/BLOWPIPE TO
BUILDING W/WOOD FRAME BUILDING |
| 850 |
1 |
MORBARK APPROX 56'X22" PAN BOTTOM VIBRATORY CHIPPER
INFEED CONVEYOR W/DRIVE MOTOR (NO FIBERGLASS TROUGH) |
| 851 |
1 |
MDI METAL DETECTOR W/SEARCH COIL, FIBERGLASS TROUGH,
ELECTRICS |
| 852 |
1 |
APPROX 28', H78 RAKE CHAIN SCREEN CLEAN OUT CONVEYOR,
H&T SPROCKETS, STEEL TROUGH |
| 853 |
1 |
MITSUBISHI 3 HP/45 RPM GEARHEAD MOTOR, DRIVE CHAIN
(LOT 852 DRIVE) |
| 854 |
1 |
24', H110 BOX CHAIN SCREEN CLEAN OUT CONVEYOR
W/H&T SPROCKETS STEEL TROUGH |
| 855 |
1 |
MITSUBISHI 3 HP/45 RPM GEARHEAD MOTOR, DRIVE CHAIN
(LOT 854 DRIVE) |
| 856 |
1 |
APPROX 60', H110 BOX CHAIN CONVEYOR FEEDING SCREEN
W/H&T SPROCKETS, STEEL TROUGH |
| 857 |
1 |
FOOTE BROS. 7-1/2 HP/45 RPM GEARHEAD MOTOR DRIVE
CHAIN (LOT 856 DRIVE) |
| 858 |
1 |
22' ROLLCASE W/(7) 48"X8-1/2" DIA ROLLS |
| 859 |
1 |
TOSHIBA 5 HP MOTOR W/DODGE 56 RPM REDUCER (LOT
858 DRIVE) |
| 860 |
1 |
FEDERAL PACIFIC 15 KVA, 240X480 TO 120/240 V,
1 PH TRANSFORMER W/BREAKER PANEL |
| 861 |
1 |
LOT, REMAINING UNSOLD ELECTRIC BOXES ON WALL |
| 862 |
1 |
10'X12' WOOD FRAMED TALLY SHACK W/AIR CONDITIONER,
CONTENTS |
| 863 |
1 |
CAROTHERS 30-UNIT HYDRAULIC OPERATED CHIP BIN
W/15 HP HYDRAULIC SUPPORT UNIT |
| 864 |
1 |
APPROX 80' H110 BOX CHAIN CONVEYOR FEEDING CHIP
BIN W/H&T SPROCKETS, STEEL TROUGH |
| 865 |
1 |
10 HP MOTOR W/DODGE 56 RPM REDUCER, DRIVE CHAIN
(LOT 864 DRIVE) |
| 866 |
1 |
45', 6-STRAND H138 CAMELBACK CANT DECK FROM MILL
W/H-SHAFT, STEEL RACES & RETURNS (NO TAIL SHAFT) |
| 867 |
1 |
SKK 7-1/2 HP/45 RPM GEARHEAD MOTOR DRIVE CHAIN
(LOT 866 DRIVE) |
| 868 |
2 |
SQUARE D 30 AMP DISCONNECT SWITCHES |
| 869 |
1 |
50', 5-STRAND H78 CHAIN CANT TRANSFER W/H SHAFT,
CANT STOP ARMS, STEEL RACES & RETURNS (NO TAIL SHAFT) |
| 870 |
1 |
9', 5-STRAND C78 CHAIN TRANSFER W/H SPROCKETS,
S-DRIVE SHAFT, STEEL RACES (NO TAIL SHAFT) |
| 871 |
1 |
SKK 7-1/2 HP/45 RPM GEARHEAD MOTOR DRIVE CHAIN
(LOT 869 DRIVE) |
| 872 |
1 |
SKK 5 HP/45 RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT
870 DRIVE) |
| 873 |
1 |
CANT BUNK |
| 874 |
1 |
RAMEY PEDESTAL MOUNT HYDRAULIC LOADER W/SWIVEL
GRAPPLE, 50 HP HYDRAULIC SUPPORT UNIT |
| 875 |
1 |
PRENTICE PEDESTAL MOUNT HYDRAULIC LOADER W/SWIVEL
GRAPPLE, HYDRAULIC PUMP |
| 876 |
1 |
13', 4-ARM TILT PKG. BREAKDOWN HOIST W/52" ARM,
88" LIFT, G.E. PACIFIC DRIVE MOTOR W/BRAKE |
| 877 |
1 |
19', 6-STRAND H78 CHAIN TRANSFER W/H SHAFT, T
SPROCKET STEEL RACES |
| 878A |
1 |
SKK 5 HP/45 RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT
877 DRIVE) |
| 878B |
4 |
CAMERAS - (1) ON OUTSIDE OF BLDG, (3) INSIDE FOCUSED
DOWN ON SHARP CHAIN OUTFEED |
| 879 |
1 |
APPROX 160' H110 BOX CHAIN SHARP CHAIN WASTE CONVEYOR
(INSIDE) W/H&T SPROCKETS, STEEL TROUGH |
| 880 |
1 |
SKK 10 HP/45 RPM GEARHEAD MOTOR, DRIVE CHAIN (LOT
879 DRIVE) |
| 881 |
1 |
1998 QUINCY NORTHWEST QNW-753D 200 HP ROTARY SCREW
AIR COMPRESSOR W/STARTER 980147C |
| 882 |
1 |
1987 QUINCY NORTHWEST QNW-1000B 200 HP ROTARY
SCREW AIR COMPRESSOR 870538 |
| 883 |
1 |
1986 QUINCY NORTHWEST QNW-500B2 100 HP ROTARY
SCREW AIR COMPRESSOR |
| 884 |
1 |
ALLEN BRADLEY 200 HP SOLID STATE STARTER (FOR
LOT 882) |
| 885 |
1 |
ALLEN BRADLEY SIZE 4 MAG STARTER W/BREAKER (FOR
LOT 883) |
| 886 |
1 |
SIEMENS 400 AMP DISCONNECT SWITCH |
| 887 |
1 |
1999 HANKISON DEP SERIES 2100 CFM BLOWER PURGE
DESICCATE AIR DRYER |
| 888 |
1 |
AIRTEK TW400 AIR DRYER |
| 889 |
1 |
VANAIR HB500 AIR DRYER |
| 890 |
1 |
AIR RECEIVER TANK |
| 891 |
1 |
LOT, AIR LINES THROUGHOUT PLANT SITE (NO INTERNAL
LINES ON ANY LOTS) |
| 892 |
1 |
CATWALK |
| 893 |
1 |
EMGLO FIRE SYSTEM AIR COMPRESSOR, 3 HP, SINGLE
PHASE |
| 894 |
1 |
1995 SIEMENS TRANSFORMER, 3000/3750 KVA, CLASS
OA, 12470Y/7200 TO 480/277 VOLT, 3 PHASE |
| 895 |
1 |
LOT, BUSS BAR BETWEEN LOT 894 AND 896 |
| 896 |
1 |
1995 SIEMENS 5,000 AMP RATED BUSS BAR CABINET
W/BUSS BAR |
| 897 |
1 |
1995 SIEMENS SENTRON SWITCHBOARD W/2000 AMP GROUND
FAULT BREAKER |
| 898 |
1 |
1995 SIEMENS SENTRON SWITCHBOARD W/2000 AMP GROUND
FAULT BREAKER, (4) ASSORTED BREAKERS |
| 899 |
1 |
1995 SIEMENS SENTRON SWITCHBOARD W/2000 AMP GROUND
FAULT BREAKER |
| 900 |
1 |
1998 SIEMENS SENTRON SWITCHBOARD W/2000 AMP GROUND
FAULT BREAKER, (4) ASSORTED BREAKERS |
| 901 |
1 |
LOT, INSTALLED POWER CONDUIT & WIRE, TECH CABLE
W/TRAYS THROUGHOUT PLANT SITE (EXCEPTIONS: NO OVERHEAD WIRE, NO 12470V WIRE FEEDING
LOT 902, NO WIRE IN TRUCK SHOP, NO INTERNAL WIRE ON ANY MACHINERY OR MACHINER
SYSTEMS, I.E. SHARP CHAIN, NO COMPUTER OR CONTROL WIRE, NO INTERNAL WIRE ON ANY
ELECTRICAL SWITCH GEAR, WIRE DISCONNECTS AT IN & OUT FEED LOGS ON ALL ELEC LUGS
STAY W/ELECTRICS, MINOR OTHER RESTRICTIONS MAY APPLY |
| 902 |
1 |
LOT, SIEMENS 12470 VOLT, 3 SECTION MAIN MILL DISCONNECT
SWITCH |
| 903 |
1 |
LOT, SPOOLED & HANGING WIRE |
| 904 |
1 |
LOT, WIRE ON SHELF |
| 905 |
1 |
ALLEN BRADLEY PANEL VIEW |
| 906 |
1 |
LOT, ALLEN BRADLEY PLC COMPONENTS |
| 907 |
1 |
LOT, ALLEN BRADLEY PLC COMPONENTS |
| 908 |
1 |
LOT, ALLEN BRADLEY PLC COMPONENTS |
| 909 |
1 |
LOT, ALLEN BRADLEY PLC COMPONENTS |
| 910 |
1 |
LOT, ALLEN BRADLEY PLC COMPONENTS ON PEG BOARD |
| 911 |
1 |
MDI METAL DETECTOR SEARCH COIL |
| 912 |
1 |
MDI METAL DETECTOR SEARCH COIL |
| 913 |
1 |
MDI METAL DETECTOR SEARCH COIL |
| 914 |
1 |
RENS METAL DETECTOR SEARCH COIL |
| 915 |
1 |
MDI CONTROL PANEL |
| 916 |
1 |
MDI CONTROL PANEL |
| 917 |
1 |
LOT, ASSORTED CIRCUIT BREAKERS ON (2) SHELVES |
| 918 |
1 |
LOT, ASSORTED ELECTRICAL W/WOOD SHELF |
| 919 |
1 |
LOT, ASSORTED ELECTRICAL W/METAL SHELF |
| 920 |
1 |
LOT, ASSORTED ELECTRICAL W/METAL SHELF |
| 921 |
1 |
LOT, HIGH VOLTAGE ELECTRICAL ON PALLET |
| 922 |
1 |
LOT, WIRING RACKS |
| 923 |
1 |
LOT, MULTI-STRAND CONTROL WIRE ON WALL |
| 924 |
1 |
ALLEN BRADLEY 10 HP DC DYNAMIC BRAKE |
| 925 |
1 |
ALLEN BRADLEY 10 HP AC DYNAMIC BRAKE |
| 926 |
1 |
LOT, ALLEN BRADLEY DC DYNAMIC BRAKE PARTS |
| 927 |
1 |
ALLEN BRADLEY 15 HP ADJUSTABLE FREQUENCY AC MOTOR
CONTROLLER |
| 928 |
1 |
ALLEN BRADLEY 50 HP ADJUSTABLE FREQUENCY AC MOTOR
CONTROLLER |
| 929 |
1 |
ALLEN BRADLEY 25 HP ADJUSTABLE FREQUENCY AC MOTOR
CONTROLLER |
| 930 |
1 |
LOT, ALLEN BRADLEY ADJUSTABLE FREQUENCY MOTOR
CONTROLLER SPARE PARTS |
| 931 |
1 |
DELTEC UPS |
| 932 |
1 |
LOT, LIGHT FIXTURES UNDER TABLE, 1000 WATT, SINGLE
PHASE |
| 933 |
1 |
ALLEN BRADLEY SMC STARTER, 100 HP |
| 934 |
1 |
BENSHAW 20 HP DC INJECTION BRAKE CONTROLLER |
| 935 |
1 |
ALLEN BRADLEY 2/30 PLC |
| 936 |
1 |
ALLEN BRADLEY 5/25 PLC |
| 937 |
1 |
ALLEN BRADLEY 5/40C PLC |
| 938A |
1 |
ALLEN BRADLEY PLC PROGRAMMING TERMINAL |
| 938B |
1 |
DELL LAPTOP COMPUTER W/ALLEN BRADLEY PLC PROGRAMMING
SOFTWARE CABLES |
| 939 |
1 |
ALLEN BRADLEY PC INTELLIGENT CONTROL PANEL |
| 940 |
1 |
LOT, TABLES & DESK UNDER LOT 924 THRU 939 |
| 941 |
1 |
LOT, ASSORTED LIGHT FIXTURES, BULBS, ETC. W/(2)
SECTION METAL SHELVING |
| 942 |
9 |
LINEAR POSITIONING CYLINDER WANDS |
| 943 |
10 |
LINEAR POSITIONING CYLINDER WANDS |
| 944 |
6 |
LINEAR POSITIONING CYLINDER WANDS |
| 945 |
4 |
SIZE 2 MAG STARTERS |
| 946 |
1 |
CUTLER HAMMER SIZE 1 MAG STARTER |
| 947 |
1 |
LOT, NEWNES TRIMMER SCANNER LASERS |
| 948 |
1 |
LOT, POWER PLUGS & RECEPTACLES |
| 949 |
1 |
MGM TRANSFORMER, 25 KVA, 240X480 TO 120/240 VOLT,
SINGLE PHASE, W/BREAKER PANEL, DISCONNECT SWITCH |
| 950 |
1 |
LOT, DESK, CHAIR, EMPLOYEE LOCKERS |
| 951 |
1 |
APPROX. 180' H110 BOX CHAIN WASTE CONVEYOR W/H&T
SPROCKETS, S DRIVE, STEEL TROUGH |
| 952 |
1 |
TATUNG 10 HP MOTOR W/NO DATA REDUCER, DRIVE CHAIN,
DISCONNECT SWITCH (LOT 951 DRIVE) |
| 953 |
1 |
LOT, ASSORTED ELECTRIC BOXES |
| 954 |
1 |
LOT, ASSORTED ELECTRIC BOXES |
| 955 |
1 |
LOT, ASSORTED ELECTRIC BOXES |
| 956 |
1 |
LOT, ASSORTED ELECTRIC BOXES |
| 957 |
1 |
SQUARE D TRANSFORMER, 75 KVA, 240/480 T0 120/240
VOLT, SINGLE PHASE |
| 958 |
1 |
SQUARE D BREAKER PANEL, 600 AMP RATED, 3 PHASE |
| 959 |
1 |
SQUARE D BREAKER PANEL, 225 AMP RATED, SINGLE
PHASE |
| 960 |
1 |
SQUARE D BREAKER PANEL, 200 AMP RATED, SINGLE
PHASE |
| 961 |
1 |
SQUARE D 100 AMP DISCONNECT SWITCH |
| 962 |
1 |
LOT, CONDUIT, TRAYS, W/RACK |
| 965 |
1 |
50 HP HYDRAULIC UNIT |
| 966 |
1 |
APPROX. 85' H480 BOX CHAIN WASTE CONVEYOR W/H&T
SPROCKETS, STEEL TROUGH |
| 967 |
1 |
SKK 7-1/2 HP, 30 RPM GEAR HEAD MOTOR, DRIVE CHAIN
(LOT 96 DRIVE) |
| 968 |
1 |
BOLT BIN W/ASSORTED FASTENERS (IN SMALL BLDG) |
| 969 |
1 |
LOT, ASSORTED MILL PARTS & SUPPLIES - REMAINING
UNSOLD LOOSE CONTENTS OF BLDG |
| 970 |
1 |
12'X16' WOOD FRAMED BLDG W/AIR CONDITIONER, ATTACHED
ELECTRICS |
| 971 |
1 |
WELDED STEEL LEAN-TOO |
| 972 |
2 |
ADJUSTABLE METAL FRAMED SHELVES |
| 973 |
1 |
SQUARE D TRANSFORMER, 50 KVA, 240X480 TO 120/240
VOLT, SINGLE PHASE |
| 974 |
1 |
SQUARE D BREAKER PANEL, 200 AMP RATED, 3 PHASE |
| 975 |
1 |
SQUARE D BREAKER PANEL, 200 AMP RATED, SINGLE
PHASE |
| 976 |
1 |
CANDIAN CAN CAR 5' LINEAR POSITIONING QUAD BANDMILL
W/(4) TOSHIBA 100 HP DRIVE MOTORS |
| 977 |
1 |
FILLER & STOWELL 5' LINEAR POSITIONING QUAD BANDMILL
W/(4) 125 HP DRIVE MOTORS |
| 978 |
1 |
HYDRAULIC SUPPORT UNIT FOR CANT OPTIMIZER LINE
W/(2) 30 HP PUMPS |
| 979 |
1 |
LOT, MILL PARTS & SUPPLIES |
| 980 |
1 |
ACME CIRCULAR SAW SHARPENER |
| 981 |
1 |
HANCHETT 772 CIRCULAR SAW SHARPENER |
| 982 |
1 |
ARMSTRONG BANDSAW SHARPENER |
| 983 |
1 |
ALLIGATOR DUAL SIDE BANDSAW SIDE TOOTH GRINDER |
| 984 |
1 |
SHOP BUILT GRINDER FOR DEBARKER PIZZA CUTTERS |
| 985 |
1 |
LOT, LEVELING BLOCKS |
| 986 |
1 |
LOT, ARMSTRONG STRETCHER ROLL PARTS |
| 987 |
4 |
SAW CARTS |
| 988 |
2 |
SAW CARTS |
| 989 |
1 |
EMGLO 7-1/2 HP, SINGLE PHASE TANK MOUNTED FIRE
SYSTEM AIR COMPRESSOR |
| 990 |
5 |
ASSORTED CYLINDERS |
| 991 |
6 |
ASSORTED CYLINDERS |
| 992 |
5 |
ASSORTED CYLINDERS |
| 993 |
4 |
ASSORTED CYLINDERS |
| 994 |
4 |
ASSORTED CYLINDERS |
| 995 |
4 |
ASSORTED CYLINDERS |
| 996 |
7 |
ASSORTED CYLINDERS |
| 997 |
11 |
ASSORTED CYLINDERS |
| 998 |
9 |
ASSORTED CYLINDERS |
| 999 |
7 |
ASSORTED CYLINDERS |
| 1000 |
19 |
ASSORTED CYLINDERS |
| 1001 |
16 |
ASSORTED CYLINDERS |
| 1002 |
30 |
ASSORTED CYLINDERS |
| 1003 |
8 |
ASSORTED CYLINDERS |
| 1004 |
8 |
ASSORTED CYLINDERS |
| 1005 |
4 |
ASSORTED CYLINDERS |
| 1006 |
2 |
ASSORTED CYLINDERS |
| 1007 |
2 |
ASSORTED CYLINDERS |
| 1008 |
2 |
ASSORTED CYLINDERS |
| 1009 |
3 |
ASSORTED CYLINDERS |
| 1010 |
4 |
ASSORTED CYLINDERS |
| 1011 |
4 |
ACCUMULATORS |
| 1012 |
1 |
LOT, CYLINDER PARTS |
| 1013 |
15 |
SCANNING LASERS FOR APPLIED THEORY EDGER SCANNER |
| 1014 |
12 |
SCANNING LASERS FOR APPLIED THEORY EDGER SCANNER |
| 1015 |
1 |
LOT, APPLIED THEORY SCANNER ELECTRICS |
| 1016 |
8 |
ASSORTED LASERS |
| 1017 |
2 |
UNIPAK 40 KVAR CAPACITORS |
| 1018 |
3 |
ASSORTED CAPACITORS |
| 1019 |
10 |
ASSORTED DISCONNECT SWITCHES |
| 1020 |
1 |
98' H110 BOX CHAIN WASTE CONVEYOR W/H&T SPROCKETS,
STEEL TROUGH |
| 1021 |
1 |
TOSHIBA 10 HP MOTOR W/FOOTE BROS 45 RPM REDUCER,
DRIVE CHAIN (LOT 1020 DRIVE) |
| 1022 |
1 |
74' H110 BOX CHAIN WASTE CONVEYOR W/H&T SPROCKETS,
STEEL TROUGH |
| 1023 |
1 |
TOSHIBA 10 HP MOTOR W/FOOTE BROS 45 RPM REDUCER,
DRIVE CHAIN (LOT 1022 DRIVE) |
| 1024 |
1 |
ITE 400 AMP DISCONNECT SWITCH |
| 1025 |
1 |
ITE 400 AMP DISCONNECT SWITCH |
| 1026 |
1 |
ALLEN BRADLEY SIZE 5 MAG STARTER W/400 AMP BREAKER |
| 1027 |
1 |
DELTEL UPS |
| 1028 |
1 |
ALLEN BRADLEY #1336 125 HP ADJUSTABLE FREQUENCY
AC MOTOR CONTROLLER |
| 1029 |
1 |
WESTINGHOUSE 400 HP STARTER W/600 AMP BREAKER |
| 1030 |
1 |
ALLEN BRADLEY SIZE 6 MAG STARTER W/600 AMP BREAKER |
| 1031 |
1 |
G.E. AV-LINE SWITCHBOARD W/(1) 1200 AMP, (1) 800
AMP BREAKER |
| 1032 |
4 |
SECTIONS OF ALLEN BRADLEY MCC'S |
| 1033 |
1 |
SECTION OF ALLEN BRADLEY MCC |
| 1034 |
1 |
SECTION OF ALLEN BRADLEY MCC |
| 1035 |
6 |
SECTIONS OF G.E. 8000 LINE MCC'S |
| 1037 |
1 |
SECTION OF ALLEN BRADLEY MCC |
| 1038 |
1 |
ALLEN BRADLEY SIZE 5 REDUCED VOLTAGE STARTER IN
1 SECTION OF MCC |
| 1039 |
1 |
ALLEN BRADLEY SIZE 6 REDUCED VOLTAGE STARTER IN
2 SECTIONS OF MCC |
| 1040 |
1 |
ALLEN BRADLEY SIZE 5 REDUCED VOLTAGE STARTER IN
1 SECTION OF MCC |
| 1041 |
1 |
ALLEN BRADLEY SIZE 5 REDUCED VOLTAGE STARTER IN
1 SECTION OF MCC |
| 1042 |
1 |
ALLEN BRADLEY SIZE 5 REDUCED VOLTAGE STARTER IN
1 SECTION OF MCC |
| 1043 |
1 |
SECTION OF ALLEN BRADLEY MCC |
| 1044 |
15 |
SECTIONS OF ALLEN BRADLEY MCC W/(48) ASSORTED
STATIONS |
| 1045 |
1 |
ALLEN BRADLEY 2/30 PLC CABINET |
| 1046 |
1 |
PACIFIC FLUID SYSTEMS HYDRAULIC SUPPORT UNIT FOR
OPTOMIZED EDGER LINE W/(2) 50 HP PUMPS |
| 1047 |
1 |
20 HP HYDRAULIC SUPPORT UNIT FOR OPTOMIZED EDGER
LINE |
| 1048 |
1 |
LOT, ASSORTED ELECTRIC BOXES |
| 1049 |
1 |
LOT, AIR NOZZLES |
| 1050 |
1 |
LOT, AIR HOSE |
| 1051 |
1 |
LOT, FOOT CONTROLLERS |
| 1052 |
1 |
LOT, HYDRAULIC HOSE |
| 1053 |
1 |
LOT, HOSE |
| 1054 |
1 |
LOT, ELECTRIC WIRE |
| 1055 |
1 |
LOT, ELECTRIC WIRE |
| 1056 |
1 |
LOT, EXTENSION CORDS |
| 1057 |
1 |
LOT, MOISTURE TRAPS |
| 1058 |
1 |
LOT, VALVE BODIES |
| 1059 |
1 |
LOT, VALVE BODIES |
| 1060 |
1 |
LOT, PIPE FITTINGS |
| 1061 |
1 |
LOT, PIPE FITTINGS |
| 1062 |
1 |
LOT, PIPE FITTINGS |
| 1063 |
1 |
LOT, PIPE FITTINGS |
| 1064 |
1 |
LOT, AIR CONDITIONERS |
| 1065 |
1 |
LOT, FANS |
| 1066 |
1 |
LOT, WELDING ROD & WIRE |
| 1067 |
1 |
LOT, TAPER LOCKS |
| 1068 |
1 |
LOADSTAR ELECTRIC CHAIN HOIST, 1 TON CAPACITY,
SINGLE PHASE |
| 1069 |
1 |
YALE ELECTRIC CABLE HOIST, 1 TON CAPACITY, 3 PHASE |
| 1070 |
1 |
YALE ELECTRIC CABLE HOIST, 2 TON CAPACITY, 3 PHASE |
| 1071 |
1 |
CM CHAIN HOIST, 1 TON CAPACITY |
| 1072 |
1 |
LOT, ASSORTED STANDS |
| 1073 |
1 |
LOT, ASSORTED STANDS |
| 1074 |
1 |
LOT, ASSORTED STANDS |
| 1075 |
1 |
LOT, CLEAN UP TOOLS - 3 PALLETS |
| 1076 |
1 |
SAWMIST SYSTEM |
| 1077 |
1 |
LOT, NO DATA EDGER GUIDES |
| 1078 |
1 |
MORBARK DEBARKER HEAD |
| 1079 |
1 |
LOT, SHELVING COMPONENTS |
| 1080 |
1 |
HYDRAULIC COMPONENTS TEST STATION |
| 1081 |
1 |
LOT, WIRE SLINGS |
| 1082 |
1 |
BARREL DOLLY |
| 1083 |
1 |
BARREL DOLLY |
| 1084 |
1 |
LOT, HANGING FILES |
| 1085 |
1 |
LOT, A5A DEBARKER PARTS |
| 1086 |
1 |
LOT, ASSORTED BEARINGS |
| 1089 |
1 |
SKK 10 HP, 30 RPM GEAR HEAD MOTOR |
| 1090 |
1 |
SKK 10 HP, 37 RPM GEAR HEAD MOTOR |
| 1091 |
1 |
SKK 7-1/2 HP, NO RPM DATA GEAR HEAD MOTOR |
| 1092 |
1 |
SKK 7-1/2 HP, 68 RPM GEAR HEAD MOTOR |
| 1093 |
1 |
SKK 7-1/2 HP, 59 RPM GEAR HEAD MOTOR |
| 1094 |
1 |
SKK 5 HP, 25 RPM GEAR HEAD MOTOR |
| 1095 |
1 |
SKK 5 HP, 59 RPM GEAR HEAD MOTOR |
| 1096 |
1 |
SKK 5 HP, 68 RPM GEAR HEAD MOTOR |
| 1097 |
1 |
SKK 5 HP, 45 RPM GEAR HEAD MOTOR |
| 1098 |
1 |
SKK 5 HP, 100 RPM GEAR HEAD MOTOR |
| 1099 |
1 |
SKK 3 HP, 37 RPM GEAR HEAD MOTOR |
| 1100 |
1 |
SKK 7-1/2 HP, 30 RPM GEAR BOX |
| 1101 |
1 |
SKK 3 HP, 1OO RPM GEAR HEAD MOTOR |
| 1102 |
1 |
SKK 3 HP, 30 RPM GEAR BOX |
| 1103 |
1 |
SKK 7-1/2 HP, 45 RPM GEAR BOX |
| 1104 |
1 |
SKK 7-1/2 HP, 68 RPM GEAR BOX |
| 1105 |
1 |
SKK 5 HP, 37 RPM GEAR BOX |
| 1106 |
1 |
SKK 5 HP, 59 RPM GEAR BOX |
| 1107 |
1 |
SKK 5 HP, 59 RPM GEAR BOX |
| 1108 |
1 |
SKK 7-1/2 HP, 30 RPM GEAR HEAD MOTOR (NO SHAFT) |
| 1109 |
4 |
ASSORTED GEAR BOXES |
| 1110 |
1 |
10 HP MOTOR W/SM CYCLO NO DATA REDUCER |
| 1111 |
1 |
5 HP MOTOR W/FALK 73.71:1 RATIO REDUCER |
| 1112 |
1 |
RELIANCE 20 HP, 1750 TO 2300 RPM DC MOTOR |
| 1113 |
1 |
30 HP MG SET |
| 1114 |
1 |
RELIANCE 20 HP DC MOTOR W/DODGE 13:1 RATIO REDUCER |
| 1115A |
1 |
5 HP DC MOTOR W/DODGE 45 RPM REDUCER |
| 1115B |
1 |
RELIANCE 20 HP DC MOTOR W/FALK 13.65:1 RATIO REDUCER |
| 1116 |
1 |
DODGE 36 RPM REDUCER |
| 1117 |
1 |
DODGE 69 RPM REDUCER |
| 1118 |
1 |
5 HP MOTOR W/DODGE 56 RPM REDUCER |
| 1119 |
1 |
3 HP MOTOR W/DODGE 56 RPM REDUCER |
| 1120 |
1 |
15 HP DC MOTOR W/FALK 17.59:1 RATIO REDUCER |
| 1121 |
1 |
FALK 5 HP RATED, 45 RPM REDUCER |
| 1122 |
1 |
15 HP MOTOR W/FALK 37 RPM REDUCER |
| 1123 |
1 |
FALK 7-1/2 HP RATED, 37 RPM REDUCER |
| 1124 |
1 |
FALK 3 HP RATED, 125 RPM REDUCER |
| 1125 |
1 |
3 HP DC MOTOR W/FALK 14:1 RATIO REDUCER |
| 1126 |
1 |
MITSUBISHI 10 HP, 45 RPM GEAR HEAD MOTOR |
| 1127 |
1 |
TECO 7-1/2 HP, 230 RPM GEAR HEAD MOTOR |
| 1128 |
1 |
FALK 25.66:1 RATIO REDUCER |
| 1129 |
1 |
G.E. 5 HP, 39.51:1 RATIO GEAR HEAD MOTOR |
| 1130 |
1 |
HATICHI 7-1/2 HP, 60 RPM GEAR HEAD MOTOR |
| 1131 |
1 |
TECO 3 HP, 45 RPM GEAR HEAD MOTOR |
| 1132 |
1 |
ELECTRICA 7-1/2 HP, 39.4:1 RATIO GEAR HEAD MOTOR |
| 1133 |
1 |
KOELLMANN 10 HP, 45 RPM GEAR HEAD MOTOR |
| 1134 |
1 |
MITSUBISHI 3 HP, 56 RPM GEAR HEAD MOTOR |
| 1135 |
1 |
U.S. 2 HP GEAR HEAD MOTOR |
| 1136 |
1 |
G.E. 25 HP DC MOTOR |
| 1137 |
1 |
BAUER GEAR HEAD MOTOR |
| 1138 |
1 |
HITACHI 3 HP, 40 RPM GEAR HEAD MOTOR |
| 1139 |
1 |
MITSUBISHI 5 HP, 45 RPM GEAR HEAD MOTOR |
| 1140 |
1 |
NO DATA GEAR HEAD MOTOR |
| 1141 |
1 |
LOUIS ALLIS 2 HP, 56 RPM GEAR HEAD MOTOR |
| 1142 |
1 |
MITSUBISHI 5 HP, 45 RPM GEAR HEAD MOTOR |
| 1143 |
1 |
MITSUBISHI 5 HP, 155 RPM GEAR HEAD MOTOR |
| 1144 |
1 |
MITSUBISHI 5 HP, 68 RPM GEAR HEAD MOTOR |
| 1145 |
1 |
MITSUBISHI 3 HP, 45 RPM GEAR HEAD MOTOR |
| 1146 |
1 |
MITSUBISHI 5 HP, 68 RPM GEAR HEAD MOTOR |
| 1147 |
1 |
MITSUBISHI 7-1/2 HP, 230 RPM GEAR HEAD MOTOR |
| 1148 |
1 |
MITSUBISHI 7 HP, 45 RPM GEAR HEAD MOTOR |
| 1149 |
1 |
7-1/2 HP MOTOR W/FOOTE JONES 30 RPM REDUCER |
| 1150 |
1 |
5 HP MOTOR W/FOOTE JONES 20 RPM REDUCER |
| 1151 |
1 |
FOOTE JONES 15 HP RATED, 37.7:1 RATIO REDUCER |
| 1152 |
1 |
7-1/2 HP RATED, 129.7:1 RATIO REDUCER |
| 1153 |
1 |
15 HP MOTOR W/FOOTE JONES 190 RPM REDUCER |
| 1154 |
1 |
FOOTE JONES 10 HP RATED, 45 RPM REDUCER |
| 1155 |
1 |
7-1/2 HP MOTOR W/FOOTE JONES 100 RPM REDUCER |
| 1156 |
1 |
FOOTE JONES 20 HP RATED, 230 RPM REDUCER |
| 1157 |
1 |
FOOTE JONES NO DATA REDUCER |
| 1158 |
1 |
10 HP MOTOR W/SM CYCLO 29:1 RATIO REDUCER |
| 1159 |
1 |
FALK 30 RPM REDUCER |
| 1160 |
1 |
RADICON 20:1 RATIO REDUCER |
| 1161 |
1 |
MITSUBISHI 7-1/2 HP RATED, 60 RPM REDUCER |
| 1162 |
1 |
WESTINGHOUSE 3 HP RATED, 25.6:1 RATIO REDUCER |
| 1163 |
1 |
REX PLANET GEAR NO DATA REDUCER |
| 1164 |
12 |
ASSORTED DRIVES |
| 1165A |
3 |
ASSORTED DRIVES |
| 1165B |
1 |
TOSHIBA 20 HP MOTOR W/RADICON 20:1 RATIO REDUCER |
| 1166 |
1 |
100' H110 BOX CHAIN WASTE CONVEYOR W/H&T SPROCKETS,
STEEL TROUGH |
| 1167 |
1 |
5 HP MOTOR W/WESTINGHOUSE 37 RPM REDUCER, DRIVE
CHAIN (LOT 1166 DRIVE) |
| 1168A |
1 |
MGM OVERHEAD TRANSFORMER, 25 KVA, 240X480 TO 120/240
VOLT, W/BREAKER PANEL ON UPPER LANDING |
| 1168B |
1 |
FEDERAL PACIFIC TRANSFORMER, 50 KVA, 240X480 TO
120/240 VOLT, SINGLE PHASE |
| 1168C |
1 |
SQUARE D BREAKER PANEL, 200 AMP RATED, 3 PHASE |
| 1168D |
1 |
SQUARE D BREAKER PANEL, 200 AMP RATED, SINGLE
PHASE |
| 1169 |
7 |
ASSORTED GEAR HEAD MOTORS |
| 1170 |
4 |
ASSORTED GEAR HEAD MOTORS |
| 1171 |
7 |
ASSORTED GEAR HEAD MOTORS |
| 1172 |
4 |
ASSORTED GEAR HEAD MOTORS |
| 1173 |
5 |
ASSORTED GEAR HEAD MOTORS |
| 1174 |
4 |
ASSORTED GEAR HEAD MOTORS |
| 1175 |
1 |
RELIANCE 150 HP, 885 RPM MOTOR |
| 1176 |
1 |
RELIANCE 150 HP, 885 RPM MOTOR |
| 1177 |
1 |
GE 125 HP, 1185 RPM MOTOR |
| 1178 |
1 |
GE 200 HP, 1175 RPM MOTOR |
| 1179 |
1 |
WESTINGHOUSE 150 HP, 1180 RPM MOTOR |
| 1180 |
1 |
RELIANCE 150 HP, 1770 RPM MOTOR |
| 1181 |
1 |
TOSHIBA 200 HP, 1770 RPM MOTOR |
| 1182 |
1 |
WESTINGHOUSE 150 HP, 880 RPM MOTOR |
| 1183 |
1 |
TATUNG 200 HP, 1780 RPM MOTOR |
| 1184 |
1 |
GE 200 HP, 705 RPM MOTOR |
| 1185 |
1 |
GE 125 HP, 1185 RPM MOTOR |
| 1186 |
1 |
GE 125 HP, 1185 RPM MOTOR |
| 1187 |
1 |
TATUNG 100 HP, 1185 RPM MOTOR |
| 1188 |
1 |
100 HP, 1800 RPM MOTOR |
| 1189 |
1 |
MITSUBISHI 100 HP, 1740 RPM MOTOR |
| 1190 |
1 |
GE 75 HP, 1765 RPM MOTOR |
| 1191 |
1 |
TOSHIBA 75 HP, 1765 RPM MOTOR |
| 1192 |
1 |
LINCOLN 75 HP, 1775 RPM MOTOR |
| 1193 |
1 |
TOSHIBA 75 HP, 1765 RPM MOTOR |
| 1194 |
1 |
MITSUBISHI 50 HP, 1150 RPM MOTOR |
| 1195 |
1 |
LINCOLN 50 HP, 1765 RPM MOTOR |
| 1196 |
1 |
GE 50 HP, 1710 RPM MOTOR |
| 1197 |
1 |
40 HP, 1800 RPM MOTOR |
| 1198 |
1 |
LINCOLN 40 HP, 1765 RPM MOTOR |
| 1199 |
1 |
LOUIS ALLIS 30 HP, 1180 RPM MOTOR |
| 1200 |
1 |
LOUIS ALLIS 30 HP, 1180 RPM MOTOR |
| 1201 |
1 |
TATUNG 30 HP, 1770 RPM MOTOR |
| 1202 |
3 |
GE 30 HP, 1765 RPM MOTORS |
| 1203 |
1 |
U.S. 40 RPM, 1770 RPM MOTOR |
| 1204 |
1 |
EURODRIVE 25 HP, 1170 RPM MOTOR |
| 1205 |
1 |
TATUNG 10 HP, 1160 RPM MOTOR |
| 1206 |
1 |
TOSHIBA 25 HP, 1760 RPM MOTOR |
| 1207 |
1 |
U.S. 20 HP, 1750 RPM MOTOR |
| 1208 |
1 |
BALDOR 20 HP, 1760 RPM MOTOR |
| 1209 |
1 |
RELIANCE 20 HP, 1760 RPM MOTOR |
| 1210 |
1 |
TOSHIBA 15 HP, 1760 RPM MOTOR |
| 1211 |
1 |
TOSHIBA 15 HP, 1765 RPM MOTOR |
| 1212 |
1 |
RELIANCE 15 HP, 1760 RPM MOTOR |
| 1213 |
4 |
ASSORTED MOTORS |
| 1214 |
3 |
ASSORTED MOTORS |
| 1215 |
6 |
ASSORTED MOTORS |
| 1216 |
5 |
ASSORTED MOTORS |
| 1217 |
5 |
ASSORTED MOTORS |
| 1218 |
11 |
ASSORTED MOTORS |
| 1219 |
20 |
ASSORTED MOTORS |
| 1220 |
1 |
HYDROSTAR HYDRAULIC MOTOR |
| 1221 |
1 |
25 HP HYDRAULIC PUMP |
| 1222 |
1 |
BALDOR 10 HP MOTOR |
| 1223 |
1 |
10 HP HYDRAULIC PUMP |
| 1224 |
1 |
LOT, MOTOR BASES/MOTOR PARTS |
| 1225 |
1 |
LOT, STARTERS |
| 1226 |
1 |
LOT, SHELVING ALONG WALL |
